DataSource 0PM_SCH_PLND_ORDER; switch to package EAM_EHP4_SR_SF

Hi Experts,
I'm trying to activate a datasource 0PM_SCH_PLND_ORDER Scheduling Overview and Planned Order in ECC, but got this error:
DataSource 0PM_SCH_PLND_ORDER; switch to package EAM_EHP4_SR_SFWS_SC is off
Please help. Thanks!
Ting

Hi,
I am having the same problem when I try to activate the datasource 0PM_SCH_PLND_ORDER. Can you please let me know how did you resolve the problem?
Thanks,
SB

Similar Messages

Datasource 0ARTICLE_ATTR; switch to package ROMD is off

Hi all,
When transfering datasources from rsa5 in ECC, I met the following warning : "Datasource 0ARTICLE_ATTR; switch to package ROMD is off".
Could somebody give me a soluce to the problem or at least a hint?
Thanks in advance.
Geo

Hi, I've encountered a similar error as well; however from note: 648898, it appears that my system is set to global check = 'OFF'.
Does someone know if this is the setting to perform a package check and what that actually means?
thanks!

Switch to package EAM_EHP4_SR_SFWS_SC is off, Message no. R8371

Hi Expert,
in ECC DEV, I'm trying to activate DataSource SAP-R/3/PM/0PM_SCH_PLND_ORDER, but got this error:
DataSource 0PM_SCH_PLND_ORDER; switch to package EAM_EHP4_SR_SFWS_SC is off
Message no. R8371
Please help. Thank you.
Edited by: Ting Chen on Sep 10, 2010 7:32 PM

Hi Ting Chen,
I'm experiencing a similiar problem, how did you solve this?
BR,
Linda

RSA5 active datasource,get this error switch to package ******* is off

Hi, expert.
When I use TCODE RSA5 to active datasource in R3,in the end I got this error:
DataSource 0WBS_ELEMT_USR_ATTR; switch to package PS_IS_EHP3_SFWS_SC is off
Message no. R8371
my R3 and BW are the same client.
I don't know how to correct it. PLZ help me, thank you very much.
Edited by: Bruce Wang on Dec 22, 2009 9:36 AM

Hi
I think u need to install package related to EHP3.
For more details :
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/installation-of-ehp3-3136634
http://www.google.co.in/search?hl=en&q=EHP3inSAP+R%2F3&btnG=Search&meta=&aq=f&oq=
Regards
Ram.

Switch to package NBWD is off

Hi
While iam activating this Data source in RSA5 0HC_APPRTYP_TEXT its showing an error message , pls provide me the solution..., My R/3 system is ECC6, and Bw Is 7. version
ERROR: DataSource 0HC_APPRTYP_TEXT; switch to package NBWD is off
Message no. R8371
Regards
chaitanya

Hi chaitu
Even I am facing the same problem ,how u solved the problempls let me know
Thanks
Priya

Error - " Switch to package ISAUTO_VLC is off "

hi,
When i tried to activate Business Content Datasources under APCO-IS_AUTOMOTIVE ---> 0IS_AU_VMS, I encountered following error message " DataSource 0AU_VM_BW_GC; switch to package ISAUTO_VLC is off ".
How can i switch on this package.
Please help.

Hi Vijay,
Applyn the note 648898
Regards
Prasad

DataSource from a productive package to local package

I need to move a DataSource from a productive package (ZUPG) to the
local package ($TMP). From transaction RSA6, I've chosen the "Object
Directory" and tried to change the assignment.
However. the system prevents the user from moving an object from a
productive package to a local or test package. This is the message you
would get if you tried and changed the package to $TMP:
"Object R3TR OSOA 0REGION_TEXT has already been exported and is
therefore known in other systems. It is therefore not possible to
change the package from productive to local (private), since
inconsistencies and errors can occur."
In theory, this should be circumvented by deleting the DataSource, and
releasing the change request thereafter. The DataSource's entry in
TADIR should get deleted and it should be possible to choose the
package $TMP when re-activating the same DataSource again in the system.
However, this is not the case in my system. The entry is not deleted
from the TADIR, even after having released the request which contained
the (deleted) DataSource!
The question is: what could have caused such an inconsistency in
the system's TADIR? Why the entries aren't deleted after releasing the
change request, even though the DataSource had been deleted from the
repository?
Thanks!
Simo

Hello Kris,
unfortunately your suggestion doesn't work.
As Simone explained in his first message, in fact the system prevents the user from changing the DataSource's directory entry, with the following error message:
<i>Object R3TR OSOA 0REGION_TEXT has already been exported and is therefore known in other systems. It is therefore not possible to change the package from productive to local (private), since inconsistencies and errors can occur.</i>
The system documentation proposes the following steps to switch an object to a local package:
<i>1. Use the appropriate editor to copy the object to a local object with a different name.
2. Then delete the old object. A change request is used to transport this deletion to the other systems.</i>
Finally it is possible to rename the local object.
In other words, the DataSource is in a productive package, and it's been registered in a transport request.
As soon as an object is inserted in a productive package, you're not allowed to move it back to a local or test package anymore. You need to delete it, release the change request and recreate (re-activate in our case) the object again.
However, the system doesn't prompt the user for a package during re-activation (please refer to my previous post), because the involved entry in TADIR is not removed from the transport request at release time.
Cheers, <a href="https://wiki.sdn.sap.com/wiki/display/profile/Davide+Cavallari">Davide</a>

Switch to package DRM11 is off

Hi all
i am installing sd datasouce 2lis_ht_dr0drm
and 2lis_ht_ms0drm
i am getting this error-"switch to package DRM11 is off"
can u pls help me in this
thanks in advance
regards
vivek

Please enter SE16 and go to table PAKPARAM. In this table there is an entry for key field 'NAME' equals 'GLOBAL_SWITCH'; this entry controls the behaviour of the package check.
The 'VALUE' for this entry can be set to
'RESTRICTED' - to switch on the restriced package check (i.e. package check is effective where required by server and/or client package)
'R3ENTERPRISE' - to switch on the restricted package check including decoupling checks between structure packages (only possible starting from SAPKB62025 - attention, this setting requires exhaustive administration of package data for all packages involved!)
Please note that in this particular case, an additional entry has to be made in table PAKPARAM with key field 'NAME' equals 'SAP_DEV_SYSTEM' and 'VALUE' set to 'X'. (Otherwise, the package check will automatically be switched off.)
'OFF' - to switch off again the package check
Please don't change any other entries in table PAKPARAM.
Please note that upon switching on this check, the activation of DDIC objects with package check errors is impossible through SE11.
Note 648898 - Switching on the package check
Hope it Helps
Chetan
@CP..

Global Package Check Switch and Package Attributes

Hi everyone,
I would like to know where can I display/change the Global Package Check Switch of a system in release ECC 6.0? I know it can be set to "Pure Package Concept" for example.
I've looked into the SAP on-line documentation and the system customizing (SPRO) but without luck. Can anyone guide me?
I am also looking for the Package attributes. In Package Builder (SE21) there is suppose to be a way to set a package to "Package Check as Server". I saw in the SAP on-line documentation that there is a "Attributes" tab but I cannot find it. Does someone know where I could find such attributes?
Thank you in advance for your help.
Regards,
Sylvain

Netweaver 7.0 EHP 1 Trial, same question: Paketprüfung als Server/Client checkboxes don't show up in package builder properties:
»ABAP Objects« (Keller/Köhler) S.69 Abb.2.13 shows checkboxes to turn on package checks / Paketprüfung als Server / Client, yet no obvious way to make these checkboxes appear.
This question has not been answered, don't know why it is »Assumed Answered«.

Error:switch to package ROMD is off

Hi,
I have accidentally deleted source system assignment for 0material infosource and i was tryng to recreate the same and the associated infopacks are used in a process chains...and when i'm tryn to assign datasource its not visible on the bw side and on r3 there is a log that menctions error(i have allready checked other threads on this topic but of no help)..can you guys suggest any disaster recovery for the same or tips to recover.
i would greatly appreciate help.
Thank you.

Hi Vijay,
Applyn the note 648898
Regards
Prasad

Error while activating BC datasources

Hi guys,
I am getting this error while activating BC datasources...it is only with my login, rest of the users can work well.
Error:
DataSource 0BP_ACTITLE_TEXT; switch to package BUPA_CENTRAL_DATA_BW is off
this happened with all DS in the BC, the problem occured because while activating initially my connection got disconnected and then this problem started.....
how do i rectify this? any help would be highly appreciated.....

make sure that the server from which ur data source gets the values are also logged on

Error when activating Datasource in Source System

Dear All,
I am gettting this error when activating data source in source system(RSA5).
1)DataSource 0NETWORK_CUST_ATTR; switch to package PS_IS_EHP3_SFWS_SC is off.
2) The extract structure DTTV_REC_53 of the DataSource 0TV_REC_531 is invalid
Message no. R8444
Diagnosis
An invalid extract structure has been assigned to the DataSource. An extract structure has to be active in the DDIC. It cannot be a view, since the customer is not able to add append fields for filling in the customer exits to a view.

Hi
To use this datasource, you need to install EHP3 package.
http://help.sap.com/saphelp_nw70/helpdata/EN/b0/7b6c759c494ffcbf821d2442687888/frameset.htm
Chandu.

Datasources activation

Hi,
I am trying to activate the datasources in RSA5 in ERP, i am getting the error 'DataSource 0MATERIAL_ATTR; switch to package ROMD is off
Message no. R8371'
Can anyone help to solve it.
Thanks in advance,
Ravi

Nathan - Your statement is partial correct.
<a href="https://www.sdn.sap.com/irj/sdn/thread?forumID=154&threadID=200078&messageID=2223932">https://www.sdn.sap.com/irj/sdn/thread?forumID=154&threadID=200078&messageID=2223932</a>
Pls. follow the aforementioned link for insights.
Hope it Helps
Chetan
@CP..

Activation of Datasources

Hi,
I am trying to activate the datasources in RSA5 in ERP, i am getting the error 'DataSource 0MATERIAL_ATTR; switch to package ROMD is off
Message no. R8371'
Can anyone help to solve it.
Thanks in advance,
Ravi

Check your system settings (SE06) and your client settings (SCC4) to make sure it's open. You should only be able to do this in a dev system, transport to other systems.
Regards -
Ron Silberstein
SAP

Active BC DataSource Error: RSA5, R8371

Hello friends,
Platform: BI 7.0 ECC6 and BC703
Error info: DataSource 0HE_SLC_MBK_1; switch to package PMIQBW_E is off Message no. R8371
Operation: When Active the Business Content DataSource Higher Education & Research (Technical name: 0IS_HER ) in R3 via RSA5, I got this error message.
Thanks
Jonas

Hi Jonas,
Try to follow steps in the below document
Link:https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0780530-bf03-2b10-d5ad-e9e8a53def23
Cheers,
Tanish.

DataSource 0PM_SCH_PLND_ORDER; switch to package EAM_EHP4_SR_SF

Similar Messages

Maybe you are looking for