Datasource 0SCALE_TEXT error in RSA3

Hello everyone,
current BW setup (SAP NetWeaver BI 7.0 support pack SAPKW70019)
I have installed the Qualifications infocube (0PAPD_C01) succesfully in BWD and now require to transport into BWQ system. When i attempted to transport in to BWQ the transport failed with log error
Mapping between data source 0SCALE_TEXT and source system SALF100 is inconsistent.
i checked to see if this datasource exists in BWQ and it does but the version is set to modified, so i then tried to transport an active version of 0SCALE_TEXT from BWD to BWQ but again this failed with the same error
Mapping between data source 0SCALE_TEXT and source system SALF100 is inconsistent.
after researching on SDN i found that i should check in RSA5 and RSA3 in qa to see if datasource is active and works. As far as i can see the datasource is active but in RSA3 when i execute extractor checker it throws error message
Errors occurred during the extraction
Message no. RJ012
again i researched SDN but many posts are not relevant or have no answers. Please can anyone help to resolve this problem.
Many Thanks
Forhad

Hi Forhad,
Doesn't this thread help you either?
CRM datasources inactive after transport
Rgds,
Sarah

Similar Messages

Error in RSA3

Hi ,
I am trying to extrct data from datasource 0CO_PC_PCP_03 in RSA3 and getting error as "The application program for the extraction of data requires a characteristic value for selection criterion PERIODE in order to deliver data. However, the request contains no such characteristic value"
help me pl.
regards,
murali.

Hi Murali,
Goto ROOSOURCE -> Give the datasource name (0CO_PC_PCP_03) and find out what type of datasource it is. If it is based on view/table then find suitable values for PERIODE from the table/view. If it is based on function module then you would need to look at the code and find out from which table PERIODE is extracted.
As for the data type for PERIODE you can fine from the extract structure of the datasource in RSO2.
Hope this helps.
Bye
Dinesh
(Do not forget to assign points!!)

Error in RSA3 for Delta

Hi,
The data load for 0FI_AR_10 (payment history) delta load is fetching zero records after we did EPH4 (Golden Tax) Upgrade to the ECC 6.0 system.
When we check in RSA3 for Delta it is throwing error as -> Message no. RJ012
There is no other info. The data load looks successful in BW but with zero records.
Please suggest.
We are facing some what similar issue for 0CUSTOMER_ATTR as in the Ticket:
[0CUSTOMER data from Unicode R/3 to Non-Unocode BW Error|0CUSTOMER data from Unicode R/3 to Non-Unocode BW Error]
Thanks,
Joe

Hi
Go to RSO2 and give the data source name 0FI_AR_10 -- there you ahve extractor BWFI3D_GET_FIAR_CM_PH(functional module) ---> reset the function and module and reactivate it
mostely the problem will be solved.
incase if it is not solved the reason might be as below
These datasources have extraction type as F1 and the function module used is BWFI3D_GET_FIAR_CM_PH( Tcode: RSA2).
When we go through the code of the Function module, there is a Case statement with update mode which is written in such a way that when the update mode is full it throws one type of error and when the extraction mode is others(which includes init, delta etc) it throws another type of error.
This update mode field in the Function module will take the value when we run the Infopackage and we will get an error saying: 'Update mode when others is not supported by extraction API'(this error occurs as the update mode takes the value of c and executes 'when other' case).
In extractor checker(RSA3), the default value taken by the update mode will be F (since we are not executing any infopackage and the update mode value will be F by default).
So ultimately when that function module is executes it will throw an error no matter what type of load(delta or full) we select.The error will occur but it will be handled differently when you run in RSA3 and when you run the Infopackage.
so i would suggest you to raise a note to SAP on the same
and i will post if I find any solution going in future on the same.
Very intresting Question
pleasure answering
Santosh

0CO_PC_10 error at rsa3

Hi
if i am ruuning rsa3 to see records for below datasources, its giving me error
0CO_PC_10
0CO_PC_PCP_30
Errors occurred during the extraction
Message no. RJ012

Hi,
Check your data source in RSA6, it is available over there and in active state.Activate the same if required or you may generate the same RSO2 as well.
While checking have a look on extract structure as well.
I hope it will help.
Thanks,
S

Extract data from datasource 0APO_MSP_CHECK_ORDER error

Hi,expert. Happy new year. I met a problem today,when I use TCODE RSA3 to extract data of datasource ,0APO_MSP_CHECK_ORDER,I got an error.
1. Follow-up error
Follow-up error
Message no. /SAPAPO/OM_ERROR184
2. om_other_failed
( om_other_failed )
Message no. /SAPAPO/OM012
So, I can't extract data from this datasource.
The datasource 0APO_MSP_SLOT had the same error too.
PLZ help me. Thank you very much.
Happy new year.

It has been solved.

Data source activated in RSA5 but error in RSA3

Hi,
I have activated data source 0CRM_OPPT_H in transaction RSA5 in our CRM system and can view this in RSA6. However when I run the extractor checker RSA3, the system generates error ( "Errors occurred during the extraction Message no. RJ012").
Upon debugging I found that this is caused by not having entry in table SMOXHEAD_S for this data source.
Also when I go to transaction BWA1 I am not able to display this data source. Other master data sources that I activated earlier are working fine. Its the transaction data source 0CRM_OPPT_H or 0CRM_OPPT_I that are having issue.
Please let me know any other steps that I may not be doing after activating the Business content data source in CRM system using transaction RSA5.
Thanks
Arunava

Bhanu,
Thanks again for your super fast reply. This really solved my issue.
However for may days I have been trying to understand this BWA transaction ( BWA1 and BWA5) and figured out some fact( Like BWA5 puts the same entry of smxhead table to snmxhead_s table to make the whole thing work, Also we can extend the mapping in the BWA1 to include additional custom object with out the badi coding( is it possible?) .
But this area still is a mystery and I would like to have a comprehensive article on this adapter layer and BDOC relationship. Is this possible for you to help here.
I would really really appreciate.
Thanks
Arunava

The Creation of Export DataSource Failed Error while transporting ODS Cube

Hi All,
I am facing this issue from last 1 week.. i had developed an ODS cube in APO-DP BW which will fetch data from SAP R/3 and its working fine in APO Dev Server. But when i transport this cube into APO PAC(Prodn Server) the below error i am getting..
   Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
   The creation of the export DataSource failed
   Password logon no longer possible - too many failed attempts
   Password logon no longer possible - too many failed attempts
   Error when creating the export DataSource and dependent Objects
   Error when activating DataStore Object ZANAUTSL
I also updated the transport conversion tables but still problem not resolved.
Immediate help is hightly appreciated.
Thanx
AJ

Hi AJ,
Looking at your error, it seems that the RFC user's password is locked and hence connectivity from R/3 towards APO BW is broken.
You know the name of your export datasource (from R/3 to APO BW). Find out the name of your R/3 source system e.g. PACCLT000, by scrolling to the right against teh export data source.
Take help of your Basis or EAI team to identify the RFC destination corresponding to the connectivity from the R/3 source system (PACCLT000) to your APO BW system. (If needed ask for help from your BW team, I am not very sure how connectivity would be set up from R/3 to APO BW, I guess this would be independent from CIF connectivity)
For this RFC connection from R/3 to APO BW, see which RFC user is maintained in SM59 in APO and ask your security team to reset (or unlock) the password of this RFC user in R/3, and then if required update the user password details in SM59 in APO also.
After this, your issue should get resolved.
Thanks - Pawan

Runtime error in RSA3

Dear all,
I have one doubt,
When i checked in rsa3 with my std extractors am getting run time error,
the data record around more than 10 lak records,
Short text
    SAP paging overflow when storing data in the ABAP/4 memory.
What happened?
    The current program requested storage space from the SAP paging area,
    but this request could not be fulfilled.
    of this area in the SAP system profile.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.

Hi ,
This error is because the amount of data you want to fetch is too much to handle by internal memory .Its a common error when we display data as ALV or tabular display works on internal table concept .
There is a limit of 2GB for internal memory and more realistic figure is 500 MB and additional restriction is a hashed table should not have more than 2 million entries .
Now in your scenario RSA3 is for debugging and extraction at ECC side .It cannot hold too much data in internal memory and will give dump .
Best solution for this is to apply filter in selection screen and reduce the amount of data you are requesting .
Regards,
Jaya Tiwari

Errors in rsa3!!

Hi Gurus,
I added a field called zzstprs in 0mat_plant_attr, when iam checking in rsa3, given below errors! can any one help me pls!!
RUN TIME ERRORS TABLE_INVALID_INDEX
error in abap statement when processing an internal tables..(probably abap programming error)
my abap programme is :
*declaration
data : l_biw_marc_s like biw_marc_s,
v_zzstprs like mbew-stprs.
case i_datasource.
when '0MAT_PLANT_ATTR'(001).
loop at i_t_data into l_biw_marc_s.
*data: L_tabix type i.
data : l_tabix like sy-tabix.
clear v_zzstprs.
select single stprs from mbew into v_zzstprs
where matnr = l_biw_marc_s-matnr and
bwkey = l_biw_marc_s-werks.
if sy-subrc = 0.
l_biw_marc_s-zzstprs = v_zzstprs.
*l_biw_marc_s-zzstprs = v_zzstprs.
endif.
modify i_t_data from l_biw_marc_s index l_tabix.
endloop.
endcase.
U r help will be appriciated!!
Regards,
Jay

Hi,
Statement in bold was missing and also do not declare variables in the loop . Modify the program as below and test in RSA3.
data : l_biw_marc_s like biw_marc_s,
v_zzstprs like mbew-stprs,
l_tabix like sy-tabix.
case i_datasource.
when '0MAT_PLANT_ATTR'(001).
loop at i_t_data into l_biw_marc_s.
<b>l_tabix = sy-tabix.</b>
clear v_zzstprs.
select single stprs from mbew into v_zzstprs
where matnr = l_biw_marc_s-matnr and
bwkey = l_biw_marc_s-werks.
if sy-subrc = 0.
l_biw_marc_s-zzstprs = v_zzstprs.
*l_biw_marc_s-zzstprs = v_zzstprs.
endif.
modify i_t_data from l_biw_marc_s index l_tabix.
endloop.
endcase.
Regards,
Prakash

Function Module as Datasource loading error

Hi,All
I use function module as datasource and create a fm in function group: RSAX
But when i loading data from the DS , it display :
Error occurred in the data selection
Code:
DATA: l_s_select type srsc_s_select,.
statics: s_s_if type srsc_s_if_simple,
         s type i.
if i_initflag = 'X'. " determine the selection fields and values
append lines of i_t_select to s_s_if-t_select.
s_s_if-requnr = i_requnr.
s_s_if-dsource = i_dsource.
s_s_if-maxsize = i_maxsize.
append lines of i_t_fields to s_s_if-t_fields.
append lines of i_t_fields to s_s_if-t_fields.
else. "fill the result as e_t_data
if s = 0.
add one line to the itab for test
         E_T_DATA-KOKRS = 'HT01'.
         append E_T_DATA.
         s = s + 1.
else.
     raise no_more_data.
endif.
endif.
ENDFUNCTION.
The function is all right i think

Hi, Chivukula
   haha , i forgot to select the passvalue in table tab , after check, it's Ok
Thanks for your time
Terry Ni
Kind Regards

Datasource configuration error.. Please Help

Helo,
I'm a newbiue to SAP WebAs.. we installed kernal 6.3 part of SAP WAS 6.4 preview release. I'm trying to configure the ORacle database using the admin gui. But we are not able to get it up, after adding the driver ojdbc14.jar and configuring the datasource.. we end up with error...
error deploying ..complex error.:363750..
Can someone help ? we have been stuck on this for the past 2 days
appreciate your help

Here is the error message:
java.rmi.RemoteException: Error occurred while starting application in whole cluster and wait.; nested exception is:
     com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Complex error : server ID 3811650:
     Cannot start DataSource "CUSTOMERTRANSACTIONREF".
     at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:678)
     at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:660)
     at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.startApplication(DataSourceManagerImpl.java:562)
     at com.sap.engine.services.dbpool.deploy.DataSourceManagerImpl.deploy(DataSourceManagerImpl.java:261)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.pj.jmx.introspect.DefaultMBeanInvoker.invoke(DefaultMBeanInvoker.java:58)
at com.sap.pj.jmx.mbeaninfo.AdditionalInfoProviderMBean.invoke(AdditionalInfoProviderMBean.java:289)
     at com.sap.pj.jmx.server.MBeanServerImpl.invoke(MBeanServerImpl.java:944)
     at com.sap.pj.jmx.server.interceptor.MBeanServerWrapperInterceptor.invoke(MBeanServerWrapperInterceptor.java:288)
     at com.sap.engine.services.jmx.CompletionInterceptor.invoke(CompletionInterceptor.java:400)
     at com.sap.engine.services.jmx.RedirectInterceptor.invoke(RedirectInterceptor.java:340)
     at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.invoke(MBeanServerInterceptorChain.java:330)
at com.sap.engine.services.jmx.MBeanServerSecurityWrapper.invoke(MBeanServerSecurityWrapper.java:287)
     at com.sap.engine.services.jmx.MBeanServerInvoker.invokeMbs(MBeanServerInvoker.java:157)
     at com.sap.engine.services.jmx.ClusterInterceptor.invokeMbs(ClusterInterceptor.java:220)
     at com.sap.engine.services.jmx.ClusterInterceptor.invoke(ClusterInterceptor.java:803)
     at com.sap.engine.services.jmx.MBeanServerInterceptorInvoker.invokeMbs(MBeanServerInterceptorInvoker.java:102)
at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImpl.invokeMbs(P4ConnectorServerImpl.java:61)
     at com.sap.engine.services.jmx.connector.p4.P4ConnectorServerImplp4_Skel.dispatch(P4ConnectorServerImplp4_Skel.java:64)
     at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:292)
     at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:183)
     at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:118)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.mpl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:151)
Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Complex error : server ID 3811650:Cannot start DataSource "CUSTOMERTRANSACTIONREF".
     at com.sap.engine.services.depoy.server.application.ParallelAdapter.sleepClientThread(ParallelAdapter.java:232)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:113)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesAndWait(ParallelAdapter.java:214)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationAndWait(DeployServiceImpl.java:4579)
     at com.sap.engine.services.deploy.server.DeployCommunicatorImpl.startApplicationAndWait(DeployCommunicatorImpl.java:676)
... 30 more

Datasource configuration error

Hi,
I unable to configure the planning datasource. Let me explain the complete scenario.
Already I have created a datasource (SID:TEST, Port:1571) and created an aplication and everything is working fine. Now client changed the SID(Test1) and Port No(1551) for the schema. I have exported the schema and imported to new SID. When I am trying to change the connection for existing datasource by editing to new SID and port no, it is giving an error "Data Source configuration failed". Below are the configtool log entries.
(Nov 26, 2009, 11:42:05 AM), com.hyperion.planning.HspDBConfigurator, DEBUG, Registeration failed: null.Registeration failed: null.
(Nov 26, 2009, 11:42:05 AM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
com.hyperion.cis.config.ProcessingException
     at com.hyperion.planning.HspDBConfigurator.configure(HspDBConfigurator.java:222)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeDBConfigTask(RunAllTasksWizardAction.java:282)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:151)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source).
I am getting the same error for other products also i.e. EAS, Planning and Reporting. But shared services configured successfully and working fine.
Please help.....
Thanks,
Naveen Suram
Edited by: Naveen Suram on Nov 26, 2009 3:21 PM
During the configuration, I have selected the option "Reuse the existing database" instead of "Drop and Create new database" as I already imported the tables to new schema.

I am trying to reconfigure Planning and Data Source Configuration. Here it is giving "Database Configuration Failed" for Planning database configuration and "Datasource Configuration Failed" for datasource configuration.
But i checked all .properties files and DB tables....all are pointing to new database only.
It is necessary to go reconfiguration or without that one will it work fine?
Thanks,
Naveen Suram

Oracle Datasource V5 error in Websphere 5.1.2

Hi
I have created a datasource in websphere using console and able to Test connection succesfully, however when i try to access through my application (from DAO) it throws following exception
before I was able to setup datasource locally using WSAD, but not able to do same on App server on Unix box.
[11/2/04 10:41:05:560 EST] 29ad5b4e Helpers W NMSV0605W: A Reference object looked up from the context "java:" with the name "comp/env/jdbc/SRSDataSource" was sent to the JNDI Naming Manager and an exception resulted. Reference data follows:
Reference Factory Class Name: com.ibm.ws.util.ResRefJndiLookupObjectFactory
Reference Factory Class Location URLs: <null>
Reference Class Name: java.lang.Object
Type: ResRefJndiLookupInfo
Content: com.ibm.ws.util.ResRefJndiLookupInfo@5c8c5b56 ResRefJndiLookupInfo: Look up Name="jdbc/SRSDataSource";JndiLookupInfo: jndiName="jdbc/SRSDB"; providerURL=""; initialContextFactory=""
Exception data follows:
javax.naming.NameNotFoundException: Context: srs-was-dev/nodes/srs-was-dev/servers/server1, name: jdbc/SRSDB: First component in name jdbc/SRSDB not found. Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0
at com.ibm.ws.naming.ipcos.WsnOptimizedNamingImpl.handleNameNotFound(WsnOptimizedNamingImpl.java:1983)
at com.ibm.ws.naming.ipcos.WsnOptimizedNamingImpl.getNextWsnOptimizedNamingContext(WsnOptimizedNamingImpl.java:1320)
at com.ibm.ws.naming.cosbase.WsnOptimizedNamingImplBase.getTargetContext(WsnOptimizedNamingImplBase.java:2424)
at com.ibm.ws.naming.cosbase.WsnOptimizedNamingImplBase$LeafOperationData.<init>(WsnOptimizedNamingImplBase.java:2877)
at com.ibm.ws.naming.cosbase.WsnOptimizedNamingImplBase.resolve_complete_info(WsnOptimizedNamingImplBase.java:1390)
at com.ibm.WsnOptimizedNaming._NamingContextStub.resolve_complete_info(Unknown Source)
at com.ibm.ws.naming.jndicos.CNContextImpl.cosResolve(CNContextImpl.java:3491)
at com.ibm.ws.naming.jndicos.CNContextImpl.doLookup(CNContextImpl.java:1519)
at com.ibm.ws.naming.jndicos.CNContextImpl.doLookup(CNContextImpl.java:1480)
at com.ibm.ws.naming.jndicos.CNContextImpl.lookupExt(CNContextImpl.java:1187)
at com.ibm.ws.naming.util.IndirectJndiLookupObjectFactory$1.run(IndirectJndiLookupObjectFactory.java:372)
Here is my java code
Context ctx = new javax.naming.InitialContext();
ds = (javax.sql.DataSource) ctx.lookup("java:comp/env/jdbc/SRSDataSource");
Here is my ds setting in console
Name : SRSDataSource
JNDI Name : jdbc/SRSDB
I also have references to the datasources from my EJBS defined in ejb-jar.xml and ibm-ejb-jar-bnd.xmi files - same setting and same code works great in WSAD.
any help ?
thank you

Sorry for late reply,
Yes I am exporting ear from WSAD and then deploying It on WAS using console, with out using DS settings(jdbc 1 way of creating connections) my ear file works fine on was.
I tried using directly JNDI name from my my class, again it worked on WSAD but throws following exception on WAS.
here is CODE
ds = (javax.sql.DataSource) ctx.lookup("jdbc/SRSDB");
ERROR
[04 Nov 2004 09:32:02,298] [Servlet.Engine.Transports : 1] ERROR (DBConnection.java:148) - javax.naming.NameNotFoundException: Context: srs-was-dev/nodes/srs-was-dev/servers/server1, name: jdbc/SRSDB: First component in name jdbc/SRSDB not found. [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0]
[04 Nov 2004 09:32:02,300] [Servlet.Engine.Transports : 1] DEBUG (DBConnection.java:127) - caught Exception
[04 Nov 2004 09:32:02,301] [Servlet.Engine.Transports : 1] DEBUG (DBConnection.java:128) - error class name javax.naming.NameNotFoundException
[04 Nov 2004 09:32:02,301] [Servlet.Engine.Transports : 1] ERROR (DBConnection.java:130) - javax.naming.NameNotFoundException: Context: srs-was-dev/nodes/srs-was-dev/servers/server1, name: jdbc/SRSDB: First component in name jdbc/SRSDB not found. [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0]
[04 Nov 2004 09:32:02,302] [Servlet.Engine.Transports : 1] ERROR (UserAuthDAO.java:95) - javax.naming.NameNotFoundException: Context: srs-was-dev/nodes/srs-was-dev/servers/server1, name: jdbc/SRSDB: First component in name jdbc/SRSDB not found. [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0]
[04 Nov 2004 09:32:02,303] [Servlet.Engine.Transports : 1] DEBUG (UserAuthDAO.java:99) - closing con
[04 Nov 2004 09:32:02,305] [Servlet.Engine.Transports : 1] ERROR (CreateProgramBean.java:373) - javax.naming.NameNotFoundException: Context: srs-was-dev/nodes/srs-was-dev/servers/server1, name: jdbc/SRSDB: First component in name jdbc/SRSDB not found. [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0]
[04 Nov 2004 09:32:02,324] [Servlet.Engine.Transports : 1] ERROR (ProgramInfoCommandDelegate.java:76) - java.rmi.MarshalException: CORBA MARSHAL 0x4942f896 No; nested exception is:
org.omg.CORBA.MARSHAL: Unable to read value from underlying bridge : The repository ID is not of an RMI value type (Expected ID = RMI:java.lang.Throwable:F8678B4F4D2EB705:D5C635273977B8CB; Received ID = IDL:omg.org/CosNaming/NamingContext/NotFound:1.0) vmcid: IBM minor code: 896 completed: No

Error in RSA3 - no target system for the delta update

Hi friends,
I have created one datasource but in RSA3 when i press F4 at target system it gives me msg like "The DataSource V_BW_DPP still has no target system for the delta update" what could be the reason? kindly help me.
Regards
Suyash

Hi Suyash,
First check whether the BW system is connected to R/3 or not by Right click on Source system in RSA1 and selecting the option Check.
Also What is the update mode you have chosen in RSA3?. Is it full ( F ) or Delta (D) . If you have chosen delta then you check in RSA7 whether the data source V_BW_DPP is appearing or not . If it is not appearing in RSA7 do init upload in BW system for the data source and then check in RSA3.
Regards,
Prakash

Datasource migration error from 3.5 to BI 7.0 - SP16

During Master data/text Datasource migration from 3.5 to BI 7.0 using export option, system migrates the datasource and shows error message 'The OLTP source 0COSTCENTER_ATTR for source system EC3150 not present', at the same replicate data source does not find a datasource. At the same time unable to replicate datasource. If you go outside the session and come back, everything works fine.
BI 7.0 system package level is SP16, upgrade to the system was done some time back.
Pls. share your experience in migration 3.5 datasources to BI 7.0 for both Master data and Transaction data.
Did any one experience similar issue like this?

I get the same error with a different object after upgrading a BI Business Content data source from 3.x to 7.0
It tells me "The OLTP source 2LIS_08TRTK for source system RD1CLNT230 not present".
Thx,
Gregg

Datasource 0SCALE_TEXT error in RSA3

Similar Messages

Maybe you are looking for