Datasource 0WS_TAROBJ_ATTR does not extract any record

I am using the datasource 0WS_TAROBJ_ATTR to get data from CRM to infoobject 0WS_TAROBJ. However, this extractor is not loading any record.
According SAP information and some forum discussion, I have found that the datasource WS_TAROBJ_ATTR loads data from the table CRM_SVY_RE_TAOBJ.
There is no data into this table, even in production environment.
I have found the SAP Note 785261 (CRM survey: Missing entries in table CRM_SVY_RE_TAOBJ) that describes a similar situation. I have applied it and after that I have provide a full repair from 0SVY_DATA_1 in order to fill out this table. However it did not work properly and the table still empty.
Could you please, someone helps me on this issue?
Thanks in advance,
Silvio Messias

No comments!

Similar Messages

Data Arrives to PSA but does NOT add any records to ODS.... WHY?

Hi Gurus:
I have a unique isseu. My dada form an info-object arrives successfully to PSA. But this data does not get added to ODS. I know that ODS does not contain these records and PSA does show these records. There are no errors but zer records are added to the ODS. Has anyone come across this before? Am I missing somethign??
Joe-Smith

r u loading parallelly to PSA and data target (or) PSA and then into Data target..
which flow u r following...
otheriwse u delete that request in DSO as anyhow it got 0 records from PSA...
and go to PSA(data source) manage and select the request u need to update and click on UPDATE WITH SCHEDULER option in that window and start...
let us know the status...after that...
rgds,
nkr

FDM for PBCS - Drill Thru does not return any records in landing page

This is referring to the Data Management functionality in PBCS, not on-premise FDMEE.
I loaded in a file, for example:
Region|Product|Account|Amount
10|100|1000|9,000
10|100|1000|1,000
In FDM, I am using a multi dimensional map to derive another field. For example, if Region is 10 and Product is 100, than Department = 555.
so in FDM, I would end up with
10|100|1000|555|9,000
10|100|1000|555|1,000
Once loaded to PBCS, that loads in as:
10|100|1000|555|10,000
I built a form that shows this intersection, and then 'drilled to source'. When I get to the FDM landing page, there are no records shown. Is this because the derived field (department) does not exist in the source, or am I doing something wrong?
Appreciate any help.

Do you have access to the server logs by any chance?
Can you check the dimension class for your Scenario dimension in your target application? is it set to SCENARIO?
not showing source records is typically related to FDMEE not finding values in TDATASEG table.
HTH

Function 'HR_READ_INFOTYPE' not fetching any records in rfc

Hi All,
   We have created a custom info type 9110 , we have a wrapper RFC build around the function 'HR_READ_INFOTYPE' to read the data from it as we have a separate web dynpro ECC 6.0 system and a 4.7 back end system.
   The rfc is working correctly in the 4.7 system but when we call it from the we dynpro system it does not return any records.
   Is this a problem with the function 'HR_READ_INFOTYPE' ?
Thanks & Regards
Gaurav Jain

hi check this..
there is no problem with the function module but there may be some wrong data passing into the input of the fm ....mainly at the dates ....the date format is inportant ....otherwise it will not return any thing...

Master Data load does not extract Hierarchy nodes in BPC Dimension ACCOUNT

Hi Experts,
I am performing master data load through standard DM package with Filter selection as:
1. Chart of Accounts
2. Hieararchy selection has 4 hierarchy names
3. Selected Import Text nodes
4. Selected Set Filters by Attribute OR Hierarchies
I have run this DM package for a set of data and selections a week ago and it worked fine.
However when i run it now, it is giving issues,
It extracts any new GL maintained in the BI system however it does not extract any hierarchy nodes at all! (Have tested this by deleting the hierarchy nodes and tried to run the master data load)
I am running the DM package in Update and have selection as External.
Any sugestions for checks / has anyone encountered this issue earlier?
Regards,
Shweta Salpe

Hi Guyz,
Thanks.
I found that the issue was with the transformation file where i was maintaining the RATETYPE.
When i removed the mapping of RATETYPE this works fine. (Pulls the nodes of hierarchies)
however now i do not have Ratetype populated in the system.
my rate type mapping is:
RATETYPE=*IF(ID(1:1)=*STR(C) then *STR(TOSKIP);ID(1:1)=*STR(H) then *STR(TOSKIP);ID)
and in conversion file i have TOSKIP *skip
I have to skip the ratetypes for the hierarchy nodes and my hierarchy nodes start with C and H.
So now that i have removed the mapping for RATETYPE can anyone suggest me a correct way to achieve this? (Note the above mapping formula was skipping all of the hierarchy nodes starting with C and H)
Regards,
Shweta Salpe

CRM_DNO_MONITOR not showing any records

CRM_DNO_MONITOR shows all the records if using the userid used in the configuration of the service desk but does not show any records if using any other user. We even gave SAP_ALL and SAP_NEW but still does not show any records. We've gone through all the threads in SDN related to this issue but no help.
Please provide any suggestions.
Lalit

Hi,
does not show any records if using any other user.
Check the following
1. If the user has a Business Partner (BP) number
2. If yes, whether his User name has been configured in Identification tab for the BP under Employee role
You can try this in CRM_DNO_MONITOR
1. Change the Status to "All"
2. Change the Layout
Regards,
Rajesh Kumar

How to Create a record if vo.executequery does not return any rows

I would like to update a single record on adf form. However if the record does not exist would like to create a row and save it in the table.
The user does not want to add a "create" button on the screen. Hence would need to add the create code if vo.execute does not return any rows...
How to add this and where to add?

you can have a TF router for for exists and does not exist and based on that execute transient VO and other VO.
Add a method call activity like below to create a row in transient VO
public Row createRow()
ViewObjectImpl tVO = (ViewObjectImpl)getTVO();
tVO.executeEmptyRowSet();
Row newRow = tVO.createRow();
tVO.setCurrentRow(newRow);
tVO.insertRow(newRow);
return newRow;
}

DTP does not fetch all records from Source, fetches only records in First Data Package.

Fellas,
I have a scenario in my BW system, where I pull data from a source using a Direct Access DTP. (Does not extract from PSA, extracts from Source)
The Source is a table from the Oracle DB and using a datasource and a Direct Access DTP, I pull data from this table into my BW Infocube.
The DTP's package size has been set to 100,000 and whenever this load is triggered, a lot of data records from the source table are fetched in various Data packages. This has been working fine and works fine now as well.
But, very rarely, the DTP fetches 100,000 records in the first data package and fails to pull the remaining data records from source.
It ends, with this message "No more data records found" even though we have records waiting to be pulled. This DTP in the process chain does not even fail and continues to the next step with a "Green" Status.
Have you faced a similar situation in any of your systems? What is the cause? How can this be fixed?
Thanks in advance for your help.
Cheers
Shiva

Hello Raman & KV,
Thanks for your Suggestions.
Unfortunately, I would not be able to implement any of your suggestions because, I m not allowed to change the DTP Settings.
So, I m working on finding the root cause of this issue and came across a SAP Note - 1506944 - Only one package is always extracted during direct access , which says this is a Program Error.
Hence, i m checking more with SAP on this and will share their insights once i hear back from them.
Cheers
Shiva

The DataSource 0CRM_LEAD_H does not exist in version A

Hi,
I am not getting any records on to BW side by any of the load(full,init/delta)
When checked RSA3 in source system(CRM) there are 5 records.
When checked RSA3 in source system(BW) it gives an error.
error:
DataSource 0CRM_LEAD_H is not defined in the source system
in (BW)Tcode RSA2 - for the DS 0CRM_LEAD_H
DataSource 0CRM_LEAD_H does not exist in version A
I checked RSA5 in crm and the DS is activated once again
Please suggest

No Nilesh,
Basis did some work around and was able to remote logon from SM59. But still the problem exist.
Now while installing business content I am getting an error (Logical system)
Error: Rule (target: 0GN_PAR_LSY, group: 01 Standard Group): Syntax error in routine
GN_PAR_LSY is an infoobject for Logical system.
Stuck up over here

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

Form does not show "new" records from SQL Database

I have a PDF form that pulls data from a SQL Server. The fields in
the PDF are populated from the database after selecting a specific
record from a drop down and then clicking on a button labeled "Fill".
The problem is that the dropdown does not display new records that
have been recently added to the database. I have to open the form up
in designer then save it, (*note - I change nothing at this point.)
Then when the form is opened back up in Adobe the dropdown show all
the records including the new ones. I even put a manual refresh on
form to try and fix this an it did not help. Seriously stumped.
Any help is greatly appreciated.
Here is my code for the dropdown.
++++++++++++++++++++++++++++
topmostSubform.Page1.JobSelect::initialize - (JavaScript, client)
var sDataConnectionName = "BBCC"; // example - var sDataConnectionName
= "Test";
var sColHiddenValue = "ContractAdmin_Key"; // example - var
sColHiddenValue = "Dept_ID";
var sColDisplayText = "JobDescription"; // example - var
sColDisplayText = "Dept_ID"
// Search for sourceSet node which matchs the DataConnection name
var nIndex = 0;
while(xfa.sourceSet.nodes.item(nIndex).name != sDataConnectionName)
nIndex++;
var oDB = xfa.sourceSet.nodes.item(nIndex);
oDB.open();
oDB.first();
// Search node with the class name "command"
var nDBIndex = 0;
while(oDB.nodes.item(nDBIndex).className != "command")
nDBIndex++;
// Backup the original settings before assigning BOF and EOF to stay
var sBOFBackup =
oDB.nodes.item(nDBIndex).query.recordSet.getAttribute("bofAction");
var sEOFBackup =
oDB.nodes.item(nDBIndex).query.recordSet.getAttribute("eofAction");
oDB.nodes.item(nDBIndex).query.recordSet.setAttribute("stayBOF",
"bofAction");
oDB.nodes.item(nDBIndex).query.recordSet.setAttribute("stayEOF",
"eofAction");
// Clear the list
this.clearItems();
// Search for the record node with the matching Data Connection name
nIndex = 0;
while(xfa.record.nodes.item(nIndex).name != sDataConnectionName)
nIndex++;
var oRecord = xfa.record.nodes.item(nIndex);
// Find the value node
var oValueNode = null;
var oTextNode = null;
for(var nColIndex = 0; nColIndex < oRecord.nodes.length; nColIndex++)
{ if(oRecord.nodes.item(nColIndex).name == sColHiddenValue)
{ oValueNode = oRecord.nodes.item(nColIndex); } else
if(oRecord.nodes.item(nColIndex).name == sColDisplayText) { oTextNode
= oRecord.nodes.item(nColIndex); } }
while(!oDB.isEOF())
this.addItem(oTextNode.value, oValueNode.value);
oDB.next();
// Restore the original settings
oDB.nodes.item(nDBIndex).query.recordSet.setAttribute(sBOFBackup,
"bofAction");
oDB.nodes.item(nDBIndex).query.recordSet.setAttribute(sEOFBackup,
"eofAction");
// Close connection
oDB.close();
++++++++++++++++++++++
Here is code for the refresh button
+++++++++++++++++++++
topmostSubform.Page1.Button27::click - (JavaScript, client)
sourceSet.BBCC.requery();
+++++++++++++++++++++

pguerett wrote:
The other thing that might be happening is a refresh issue on the DropDownList. Try adding the command xfa.layout.relayout() after the database connection has been closed.
Paul
Good catch Paul! Would you believe that I have been trying to get this resolved for almost two years! Works perfect now.
Thank you,
- Eric

File Screening Audit Report does not contain any data : report statistics is empty

Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.

Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo

Output map: Document Type does not match any of the given schemas

On a send port, we have a map that uses a custom xslt. We were hoping to somehow design the map so the output was essentially a generic xs:any schema. But unless we ad a reference from our map assembly to the assembly that holds the actual schema for
the message pertaining to the map out put we get an error:
The Messaging Engine failed while executing the outbound map for the message going to the destination URL "C:\BizTalk\Test\%MessageID%.xml"
with the Message Type http://test#testmessage. Details:"Document type "outputtest#outputtestmessage" does not match any of the given schemas.
Is there a way to avoid having to have the reference?

Hi ,
In BizTalk messages are distinct from each other based on the message type . In your case http://test#testmessage (Namespace#RootNode)
Now coming to your case have you verified whether you have a schema type matching the response is deployed with the solution. The easy way is to look into specific BizTalk application schema node .
If not ,What you can do is to create a new schema for output having "TestMessage" as record and any element inside it. After that apply a mass copy
funtiod from source t destination(in your case any type schema created).
Thanks
Abhishek

The document type does not match any of the given schemas. batching

I am aggregating messages(batching) in Orchestation by calling pipeline. I have send pipeline where I have standard assemble component and custom pipeline in encode to assign some values .
When I test it I get following error There was a failure executing the send pipeline: "Zones._870.Pipeline.Send870Pipeline, Zones.870, Version=1.0.0.0, Culture=neutral, PublicKeyToken=51b3a99d8425ff5a" Source: "ZonesAssignGUID" Send
Port: "SendToAX870" URI: "C:\File_Out\Ingram\870\%MessageID%.xml" Reason: The document type "http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope" does not match any of the given schemas.
Can somebody help me how to resolve this issue?

Yes this is configured schema as envelope schema. This one is deployed in biztalk . I tried whatever suggest below query and return one record. Not sure but looks like error message misguiding here.
select * from BT_DocumentSpec where msgtype like '%http://schemas.microsoft.com/dynamics/2011/01/documents/Message#Envelope%'

Spool file does not contain any text when PDF is printed

When we print some PDF files via Adobe Reader, the printjob does not contain any text.
In Adobe Reader I can select the text but when you print it, it prints it as images (polygons records in EMF) instead of text (e.g. EMR_TEXTOUT).
Two questions:
How can we make sure that Adobe Reader always prints text?
On what is the decision based in Adobe Reader to print the PDF document as an image or as text?

Well we are looking for this information, otherwise we would not have asked this question. I really hope to get in contact with a Adobe Reader printing specialist who could give us these answers.
There must be something that decides to print as image or with text.
E.g. Adobe Reader 9 often prints text compared where Adobe Reader XI doesn't print the text for the same PDF.

Datasource 0WS_TAROBJ_ATTR does not extract any record

Similar Messages

Maybe you are looking for