DataSource 2LIS_02_ITM has to be replicated

Hello ,
*We cannot load data to PSA (BW 7.0) with extractor 2LIS_02_ITM.*
(Some changes might have occurred in R/3 due to a full SAP solution loaded. But theses changes should not have impacted BW).
We launch the data package : We receive the message
DataSource 2LIS_02_ITM has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 2LIS_02_ITM does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 25.08.2008 16:16:10.
The time stamp in the BW system is 08.11.2007 14:27:56.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
We did the following actions :
1) Replicate data source
2) We tried to activate the data source (modify, activate) :
We get an error message :
Inconsistent user object 2LIS_02_ITM V47_020 for PSA 2LIS_02_ITM_BA
Message no. RSAODS251
3) We launched program RS_TRANSTRU_ACTIVATE_ALL for this data source. It went ok.
But still, we have the same error when we launch infopackage again.
- How could we investigate ?
- What can be done ?
- Do you know where to see the time stamp of data source on BW side ?
Thanks a lot for your help.
Françoise

Hello,
The change done in extractor 25.08.2008 :
after receiving update from the SAP business solution, this date was 20.08.2008.
to try to solve our problem, we reactivated the data source 2LIS_02_ITM in source system R/3 on 25.08.2008
you should delete all PSA table, not only last request :
does it mean we should delete (and not empty) PSA table with transaction SE14 ?
Then how do we recreate again PSA table ?
Françoise

Similar Messages

Error message: DataSource ZPRODUCT_STATUS_TEXT has to be replicated...

Hi All,
a job in a process chain was failed with this error message:
DataSource ZPRODUCT_STATUS_TEXT has to be replicated (time stamp, see long text) R3 16
our R/3 system it was upgraded one week ago for the ECC6 version and our BW version is still 3.0b, i don't know if because the upgrade processus i get this error and i have to do something in the BW system...
thanks for your help
Bilal

HI,
i tried to do what you said, from infosource: replicate datasources and after se38 and i have choice in the box the name of infosource and after execute
but i have get like a message: problem class important
message text: No transfer structure selected
Message Text
No Transfer Strcuture Selected....with this info
Technical data
Message type__________ I (Information)
Message class_________ RSAR (Data transfer and meta data maintenance)
Message number________ 051
Message variable 1____ No Transfer Strcuture Selected
Message variable 2____
Message variable 3____
Message variable 4____
Message attributes
Level of detail_______ 1 (Level of detail 1)
Problem class_________ 2 (important)
Sort criterion________
Number________________ 1
i have tried to load again but the same problem...any body have a plus info....
Thanks
Bilal

DataSource 8ABCD_K01 has to be replicated (time stamp, see long text)

Hi,
We copied SCM production system to SCM quality system and after that I tried to run forecast process chain.
I got the following error message when process chain tried to extract sales history and failed:
DataSource 8ABCD_K01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 8ABCD_K01 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.12.2008 23:55:19.
The time stamp in the BW system is 01.07.2008 01:51:43.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Errors in source system
Message no. RSM340
I never did this activity (data source replication)before.I'll appreciate if somebody can help me and provide step by step process to how to do it?
Thanks
Kumar

Thanks for prompt respons Julien.
STEP1:
In SCM quality system, I went in RSA1-- > Infoprovider-> Data source->Right click there --->replicate metadata
got popup message :
Message no. TK730
Diagnosis
In this logon client, any changes to the Repository and to cross-client Customizing objects are prohibited.
System Response
The function terminates
Procedure
If you still want to make the changes, contact the system administrator, who can allocate you a user in a client where you can make the changes.
STEP2:
When I ran the program RS_TRANSTRU_ACTIVATE_ALL ,
entered source system : BW....CLNT...
Infosource : 8ABCD_K01
got following log :
No Transfer Structure Selected
Message no. RSAR051
Do I need to do run data source replication process in SCM developement and then trasport to quality? Is there any pre/post requisite or step i missed.
Thanks

DataSource has to be replicated (time stamp, see long text)

Hi Experts,
in Production i am getting an error like below
DataSource has to be replicated (time stamp, see long text)
@5C@ Errors in source system @35@
Message no. R3016
Diagnosis
DataSource 8ZCRFAC03 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.04.2011 12:56:44.
The time stamp in the BW system is 19.04.2011 12:29:02.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
i replicated data source and activated transfer rules giving source system and infosource but still it is failing with same message
what went wrong not able to understand
Please help,
Thanks in Advance
Nitya

Seems to be an incorrect transport sequence:
1. First transport you DS from source system R/3 QA to R/3 Prd
2. Once it is successfully transported to R/3 PRD, Replicate DS in BI PRD
4. Now try to collect your infosource, DS, TR in transport request & try to transport it from BI QA to BI PRD.
5. Once it is successfully replicated in Production try Running the loads
It should work.
Regards
Raj

Purchase Order History 0SRPO_D1 no update from Datasource 2LIS_02_ITM

Version
   SapNetwear 2004s
   SAP_BW Patch 14
   BI_CONT Patch 5
From Business Content I activated ODS 0SRPO_D1-Purchase Order History and all components as datasource 2LIS_02_ITM. Version is 3x with Transfer Rule, InfoSource and update rule.
Datasource is with Delta Process type ABR.
Data are correctly extracted from R/3 (Version ECC6.0) to the PSA. But 0 data are updated in the ODS.
I have the same the problem with ODS 0SRCT_DS1-Contract Management.
Is someone has any idea?

Problem solved.
It was necesary to determine the Industry Sector before sending items from MM.
Transaction SBIW / Settings for Application-Specific DataSources (PI) / Logistics / Settings: Purchasing / Determine Industry Sector
By default, the option "None" is flagged.

One field in standard datasource 2LIS_02_ITM can not be found in LBWE

Dear expert:
I have one field NOPOS of datasource 2LIS_02_ITM (Purchasing Order Item) need to find the source table.
Here my question is: NOPOS is a standard field of datasource 2LIS_02_ITM, why can I not find this field in LBWE through maintenance? Any suggestion to find the source table?
Thanks all for your time in advance~
Tim

even if it is a counter field it should be present in DataSource structure as the infosource of this DataSource has mapping of this field.
Check the HELP.SAP.COM documentation for same
Regards,
Sharayu

Settings for datasource 2LIS_02_ITM in R/3?

Dear Friends,
I am preparing the datasource 2LIS_02_ITM in R/3 for data extraction and the SAP Library shows that there are some prerequisites for using this datasource. The following settings (as below) need to need to be made in R/3. Can somebody explain how to navigate to this setting in R/3? i am not able to find the path for this. Thanks a lot in advance for the help.
Raj
For 2LIS_02_ITM
Prerequisite:
If you wish to transmit data on other processes to the BW Content in addition to the standard processes.
You should Maintain process keys in order for your data to be interpreted correctly in the BW Content.
The path is
Customer-Defined DataSource--> Logistics --> Settings for Purchasing --> Maintain Process Keys for SAP BW

Hi Raj,
See if these help you:
Re: Process Keys in Purchasing Analysis
Re: Process Keys in MM
Re: 2LIS_02* Purchasing extractors
Hope this helps...

FI datasource that has Delta Management

Hi Gurus,
I'm currently using datasource 0FI_GL_2 w/c needs to delete all data and reload all the data. When i was looking at LBWE looking for other datasources that has delta management I couldn't seem to find anything related to FI. So is there any other FI Datasource that has delta management & will not require me deleting the data and reloading it again. Thanks in Advance
- Kit

Hi,
I didn't understand what u r saying
1] is it SETUP TABLES concept is there or not? if NO how can v extract data from R/3?
2] how can v find delta ?
3] newly posted and changed records how can v achieve?
4] if delta failed where v can find out the records?
can u plz help me ....
thanks.

Datasource abcd cannot cannot be replicated ( see time stamp, longtext)

Hi friends,
If this is a load error , then just replicating data source from source systems( RSA1--source systems-) is sufficine tor i should do more than this?
regards,
siddhu

Hi,
Initially check the connection between the systems.
Get into the source system and check whether the datasource is transfered or not.If not transfered transfer it.Now replicate the datsource.
If everything is ok and still data is not loaded , you may do like this ...
After replication of the data sources you need to activate once agin the TR mapping. Then you can load the data.
Regards,
Durga
Message was edited by:
Durga Prasad Ch

Hi Can you tell me any datasource whcih has both action type and wagetype.

Hi
Can you tell me any datasource or cube or multiprovider whcih has both action type and wagetype.
Edited by: manukonda anil kumar on Oct 11, 2010 1:45 PM

hi Manu,
I think this question has been answered check the below thread.
Datasource in HR which has both payroll and wagetype.
Regards
Kp

LO Extraction 2LIS_02_ITM Problem

Hi guys,
Me again. I tried using V3 updating to extract data for business content cube 0PUR_C01. I also installed only one of the 4 update rules (the one that uses 2LIS_02_ITM as its datasource) for this cube.
Everything went fine, up to the point wherein i was supposed to perform the [Delete set-up tables / perform extraction] part of the process.
This is what the procedure i used (please tell me if i did something wrong):
1. Maintained extract structure for 2LIS_02_ITM (LBWE)
2. transfered datasource 2LIS_02_ITM using tcode RSA5
3. Checked transfer in RSA6
4. Maintained datasource 2LIS_02_ITM in LBWE
5. replicated datasource in BW
6. installed business content cube 0PUR_C01 with all dependent InfoObjects but with only 1 update rule (the one that uses 2LIS_02_ITM as its datasource).
7. Assigned infosource 2LIS_02_ITM to datasource 2LIS_02_ITM
8. chacked activated business content cube 0PUR_C01 and update rules. (although not all key figures where activated, some of them, those without attached routines from the business content, did not have assigned key figures.
9. Activated datasource in LBWE
10. set parameters for job control in LBWE
11. Chose V3 serialized update as the update mode in LBWE
12. Created an infopackage for datasource and infosource 2LIS_02_ITM.
13. Started scheduling.
An error in the monitoring came up. It said that:
No data available
Diagnosis
The data request was a full update.
In this case, the corresponding table in the source system does not
contain any data.
System response
Info IDoc received with status 8.
Therefor, no data could be seen in the infocube. Please do help me! I don't know what i did wrong.
In need of help,
Peter

Roberto Negro,
While filling setup table by using T-code OLI3BW (Purchasing) it is taking very long time.
Please let me is there any way to rerduce this time.
We are at BW 7.3 version.
Regards,

Help please! UD connect datasource can not stay in synch with source table

I have been using UD connect to extract data from Sybase table views for 2 years already. As many who have used UD connect know it is very diffcult to get it to work. But I went through all that and at least it has been working fine except sometimes difficulty transporting. And I am aware of all major OSS notes about UD Connect.
However this loading error has been driving me crazy. Almost on a daily basis some data loads would fail with error 'DataSource (datasource name) has to be replicated '.
So I re-generated the datasource and activated infosources, test loaded and it all worked fine. Come next morning it would fail again with the same error.
I talked with DBAs and they swear that no table changes were made overnight. then after it keep happening for several days in a row, I ruled out table change possibilities. Especially when I read this morning the error message:
DataSource (datasource name) does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 2007.05.01 17:40:59.
The time stamp in the BW system is 2007.05.01 17:39:45.
The timestamp is only less than 2 minute apart.
Can anyone give me any pointers?
I now have a production support problem everyday.
Any help is greatly appreciated!
Julian

I am in need to automate the UD Connect process in SAP BI. I am trying to push the data on daily load basis from SQL Server 2005 to SAP BI. I was told to use UD Connect due to some restrictions.
Could you plz let me know how I can automize the UD Connect process. I have a minimum experience configure the RFC destination etc. But that is not enough to go and start the process.
First I wanted to know how the view will be taken it to SAP BI?
Before the view is moving to SAP BI, will the UD Connect converts the view into Flat file and then transfers to SAP BI?
If it converts to flat file, where will it be stored in SAP BI? Is it stores in Application directory of the BI server or something else?
If it not converts into flat file, then how can I automate this process on daily load basis, for this should I write any ABAP program? If yes, please let me know the pseudo code how I can do it?
I am really confusing about the daily load basis.
It would be highly appreciated if you let me know the process.

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

Error During Replication of Data Source in BI 7.0 SAPKW70017

Hi Experts
We have recently imported Support Pack SAPKW70017 into our quality
system. The Quality System Client setting is
- No changes Allowed
- No change to Repository and cross-client Customizing objects
After upgrade when ever we are trying to replicate data sources we are
getting the error. "Changes to Repository or cross-client Customization
not permitted".
This error was certainly not there before updating to SAPKW70017.
Interestingly if we change client setting to
- Automatic Recording of Changes.
- Changes to the Repository and cross-client Customizing permitted
and try to replicate data source. System does not prompt for any change
request.
To overcome this, we tried to import the 'data source in BW' via change
request from development. The replication completes successfully but
time stamp does not matches with source. And we end up in
error "DataSource 0FI_AR_4 has to be replicated (time stamp, see long
text)" in scheduler.
Please advise.
Thanks & Regards
Sachchida Nand Dubey

hi,
I am looking forward to implement SAPKW70017, I need to know the CONS of SP17, what was the reason which made you implement SP17, just to have updated Version of SP or did you face with any problems and decided to update the SP? what was the previous SP which you had,
We have problems in F4 search help when running queries, SAP asked us to implement latest which is SP17, but wanted to make sure what would be the CONS before we do it, we are having SP15 in BI 7.0
Please update the post for this.

Error in Source System While Uploading Data from ODS to Data Target

Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
Chakri

This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG

DataSource 2LIS_02_ITM has to be replicated

Similar Messages

Maybe you are looking for