Datasource 2LIS_06_INV - Available

Hi experts,
I have to activate datasource, but it's only available for ECC 6.0.
I check my system status, and it show (SAP R/3 Enterprise):
SAP_BASIS     620
SAP_ABA     620
SAP_APPL     470
SAP_HR     470
ABA_PLUS     100
It indicates that i have the correcte realease? becausi I dont find the datasource.

You are currently in 4.7 not ECC 6.0 and this data-source is not available in 4.7.
In ECC 6.0 you have SAP_APPL 600 not 470.
Does this help you?Do award points for if it does .

Similar Messages

Datasource not available

Hi all,
we found that 2LIS_06_INV is the datasource that we need. However we dont have it because we are in ECC 5.0 and the basis guys tell us it´s not possible to upgrade the content version.
With this situation which would be the best solution for us? to create the datasource manually based on a view? based on a function module? or maybe it´s possible to install the datasource individually in the source system.
Many thanks in advance for your help

Hi,
The datasource 2LIS_06_INV is available ECC 6.0 and BI 7.0 onwards. If your SAP environment is different from the above, then you can consider creating a generic datasource on RBKP and RSEG to meet your requirements.
Assign points if useful.
regards,
Pinaki

Enabling Early Delta Initialization option for LO DataSource 2LIS_06_INV

Hi Guyz,
I want to enable Earlt Delta Initialization option for LO DataSource 2LIS_06_INV, as of now its greyed out.
please tell me if its possible or not, and if yes then please let me know the steps in detail.
cheerz,
raps.

hi,
Not all Data sources support Early Delta Initialization. Early delta initialization is done to capture the deltas when the initialization is being done between BW and source system (init with data transfer). As init with data transfer takes large time and during this time any records created will also be not captured so we do early delta initialization, also the same can be achieved by executing the init without data transfer and then loading a full repair request. The init without data transfer creats a time stamp and delta is generated for newly posted records.
regards,
Arvind.

Help! error occured when activating DataSource 2LIS_06_INV

Hi,experts
When activating BI content DataSource 2LIS_06_INV, one warning message populated, 'the text of DataSource 2LIS_06_INV is not maintained in language D ' , and this caused the failure of activating 2LIS_06_INV,
please somebody offer me help, how could I correct it? Thanks, _

Hi Wilson,
Similar issue I was resolved with help of basis team.
They used SO10 transaction code creation of standard text for desired client.
Please take help from Basis Team.
Regards,
BBC

Data Mart Datasource not available in active state

Hi Experts,
I need to use the generated data source 80PLANTM to create transformation rules for a DSO, but I find that the datasource is available in Modified State (Active Version does not exist). Since this is a Emulated 3.x DS, I am unable to activate it.
Also I don't see a NW04s DS available. We are on NW04s SP 7.
Can someone guide me through this?
Thank you,
Deepthi

Incase you dont have access to OSS Notes...
OSS Note: 925228
Symptom
DataSources (R3TR RSDS) are not activated automatically during their replication if they are not active already.
This seems to differ from the behavior during the replication of 3.x DataSources (R3TR ISFS).
Other terms
ISFS, RSDS
Reason and Prerequisites
When you activate a DataSource (R3TR RSDS), the system generates the Dictionary objects, the transfer structure in the BI system and the source system, and the Persistent Staging Area. This is a fixed part of the object generation that ensures that data can subsequently be loaded to the Persistent Staging Area. A transformation does not have to exist for this purpose.
This type of process was not used for 3.x DataSources: With 3.x objects, data could only be loaded after a 3.x DataSource (R3TR ISFS) had been mapped to a 3.x InfoSource and the relevant transfer rule had been activated. This means that this type of process also required an explicit and manual step to generate the Dictionary objects.
If all replicated DataSources (R3TR RSDS) were activated automatically, the system would generate a large number of mostly superfluous Dictionary objects. In addition, the replication would take several hours, for example, when you connect a new source system with several hundreds of DataSources.
Solution
Before loading data or creating a transformation, manually activate the DataSources (R3TR RSDS) that are really required.
Thanks,
Raj

Business content 3.30: Datasources not available for installation

Hello,
we have recently upgraded our business content from 3.10 to 3.30 in order to get new business content (e.g. datasource 2LIS_13_VDKON - billing item pricing conditions).
Although the upgrade was successful, the new datasources cannot be found in the Administration Workbench/ Business Content in order to install them.
Is there something more we should be doing after the upgrade, in order to be able to see the new Business content as available for installation?
Thanks in advance,
Pavlos

Palvos,
You can not find the datasources in Admin workbench. Datasources can be found in R/3.
Login to your R/3 system. Go to RSA5. Expand all. Search for your datasource. Click on "Transfer Datasources" icon on tha tab. This installs your datasources on R/3 system.
Once the installation is complete, login to BW, go to RSA1, "Source Systems" tab, select your source system and 'replicate datasource' by right clicking on it.
You can install corresponding Infosource from "business content" tab in BW.
Hope it solves your problem
Gova

DataSources not available

Hi Friends,
We have connected BW-Quality system to SAP-R/3 Production System to Refresh data form R/3 Production to BW-Quality system for testing purpose.
For this we have to create Transfer Rule between BW Quality-Infosource to R/3 Production DataSource to communicate between these two systems.
I have created Transfer Rules for many of them and created infoPackages too....
But while creating Transfer Rules for some of the infosources the DataSources are not available. The DataSources are in Active in the R/3 Production system.The same available in the SAP R/3 System which is working fine to Extract for BW-Production system.
But it is not available to connect with BW-Quality system.
I replicated all datasources from R/3 system and Replicate MetaData also.....even they are not available.......
What might be the reason and what is the solution for the same.,.,....
Thanks&Regards
Anand

Hi Anand,
There are a couple of possibilities why the datasources from R.3 are not appearing.
1. It could be that for those particular datasources, your user profile have security authorization limitation. Can you try if its possible to use a "sap_all" access just for viewing all the data source so to remove the doubt on security?
2. Its possible that the application component from R/3 RProd is not available in your BW system, so the missing D/S might be in the generic node, can you try doing a search through the technical name of your data source after you have done your replication?
3. A long shot guess but its possible that the user that you are using when you performed the replication of source system had security limitation also that for those particular D/S they were not captured by the profile available for your user ID.
For the meantime try these items, let me know if you find out other things as that might help understand what happened.
Cheers,
Jeff

ODBC Socket datasource not available on Mac install of ColdFusion 8

We are trying to download ColdFusion 8 on a Mac Intel Server
to connect to a FileMaker Pro 8 database. The datasources does not
include the ODBC Socket choice which is what I have to use to
connect to the database. Am I installing something wrong or what?
It does show up if I download it on a PC, but not on the Mac.
HELP!!

The odbc client/server app that ColdFusion 8 ( and mx6 &
mx7) uses to make ODBC connections is a windows only application.
Therefore ODBC socket is only available on windows. You will not
find it on linux, unix or mac versions.
FileMaker 9 appears to supply both ODBC and JDBC drivers.
Perhaps earlier versions do, too. Use a JDBC connection to connect
to filemaker as described
here.

Failed to Load DTP from Datasource 2LIS_06_INV

Dear Experts,
I have a problem to load data to Infoprovider (0SRIV_D3) using DTP. I am using datasource for Invoice - 2LIS_06_INV.
When i load data to the PSA, it is succeeded. But once i try to load it to DSO using DTP, it has failed.
The Error Message is: Exceptions in Substep: Rules. I cannot read further information about the error, because when I click on the error icon, then the screen is run into ABAP Editor: RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
Now I'm stuck with this error. How can I solve this error?
Thanks in advance.
Tika

Hi,
Try Running the DTP in degugging mode and see code where the exception is caught. then you will have some idea on the casue of the error.
Thanks,
Nagarjuna

Delta functionality for LO datasource 2LIS_06_INV for enhanced Z fields

Hi Experts,
We have enhanced standard data source 2LIS_06_INV by appending some Z fields. When we are doing full load values are getting populated for the entire Z field but when we are running delta request, values for some Z fields are not getting populated.I have put the code to extract the value for Z fields in user exit under include ZXRSAU01.
If any one have faced this isuue , Please help me out .

Ur error is a very common error
need not panic
this can be solved
check whether all the v3 jobs are maintained properly or not
check whether the datasource is in active status or not
Pls assign me full points if answer satisfied to you
Regards ,
Subash Balakrishnan

DataSource not available after restart

Hi,
I have created a new JDBC driver for MS SQL Server 2005 and a custom data source that is using the JDBC driver and that is connecting to my database. Upon creation of the data source, the data source is shown as available (green) and works fine.
However, when I restart my system, the data source is still there, but is not available (red). When I delete the data source and create it again, it works fine.
Does anybody know why the data source might be not available after the restart of the server? Any help would be highly appreciated.
Best regards
Holger

I don't know what I should change in the MS SQL Server. And as the DataSource works correctly once I have deleted and recreated it, I would have thought that the problem is somewhere with the application server.
A colleague of mine is using the same application and is having the same problem, although he independently created his system.
Best regards
Holger

DataSource only available in ECC 6.0 - How to copy?

Experts,
We like to use Business Content datasources (0PM_ORDER_OPERATION and 0PM_COMPUNIT_ATTR) that are only available as from SAP version ECC 6.0. The client is on R/3 version 4.7.
- Do you know of a way of getting the datasources in SAP R/3 4.7? Have you come accross cases were SAP for instance makes the underlying function modules and extract structures available in a lower version?
There are similar datasources available in 4.7 (e.g. 0PM_OM_OPA_1). In order to use those and further extend them (cant use original one for customer specific reasons) I would like to copy them in a customized datasource. Do you know how this is best done?
Thanks, Meindert

If they still go back and support and enhance older datasources, how will they market the new product and get the customers to upgrade to the new version?
I would think the best bet would be to enhance.
But you can try by asking SAP.

Transport Error - Datasource not available in the target system

Hello exports,
-- We have a custom Inboject zvendor
-- text master data is coming from 0vendor
-- need to transport the datasource 80vendort of the datamart + some other objects along with it.
-- transport from CLDEV1 to CLQLT1
-- included: datasource 80vendort, trasnfer structure, transfer rules.
-- error: Datasource 80vendort does not exist in the source system CLQLT1 of version A.
-- could you please suggest me if i have missed something in here.
Measures taken:
-- i have tried doing generate export data source in the CLQLT1 system also.
-- replicated the datasources for the self source system in CLQLT1.
-- observed that the datasource 80vendort is not yet visible in datasource overview of the self source system of CLQLT1.
Solution:
-- create a new tranport only for the datasource 80vendort, transfer structure and transfer rules.
Wondering if this solutions would work. Is there any thing I am missing...?
Please suggest. Any suggestions are highly appreciated.
Thanks,
Sweatha.
Message was edited by: Sweatha Mohan

Hi Sweatha,
When we are transporting data source, did you know that we should first transport the data source from R/3 DEV to R/3 QA (Source Systems) and replicate them to BW QA later on?
Because if we transport BW Objects first, we will get similar errors such as what you have experienced.
Hope it helps and if it did, award me points...
--Jkyle

Datasource not available in BI

Hi All,
New to BI
I have to create a datasource with view and then have to replicate the data source in BI. as 3.x datasource
1) I have created the Generic Datasource with View
2) Able to see the datasource in RSA6
3) Now i hv to replicate the datasource in BI but i am unable to see the datasource in BI.
am i missing anywhere in the process.
please suggest me .
anyhting will be appriciated
thansk in advance
--AK

Thanks for the reply guys:
Shambu:   I have to repplicate only my datasource i shud not replicate any other. to do this i am not able to find the datasource.
   can i do a replication to the application component will there be any impact to other datasources coz i hv to do the replication in 3.x.
---Please suggest
Ramesh: i hv searched it , actually while creating it i hv assigned to MM-IO application area... so i hv to find there. but i could not.
     -- please suggest what to do to find
Naveen: thanks i will do . but i need to find the datasource.
SO without replicating the complete source system we cannot see the datasource ???
But i hv to do only one datasource i shud not touch the other.
please suggest
thanks
regards
AK

IS-U DataSource for Budget Billing Plan (table EABP) available?

Dear all,
We're looking for a Datasource to extract data from table EABP, containing masterdata of Budget Billing Plan.
Anybody any idea if this datasource is available?
Kind regards, Harjan

Dennis,
Thanks for your answer.
We decided to create a generic datasource with deltamechanism on creation date and change date. We created a DS with Function Module for this.
However, when a Budget Billing Plan is deleted in IS-U it's deleted from table EABP.
Thus this deletion never flows into BI, leaving the deleted BBP in BI.
Any idea how to solve this?
Kind regards, Harjan

Datasource 2LIS_06_INV - Available

Similar Messages

Maybe you are looking for