Datasource 2lis_11_vaitm Activation

Hi All
I activated the datasource 2lis_11_vaitm on R/3 Dev throught LBWE. (clicked on the activate pencil).
This created a transport which I imported into R/3 QA and this shows the datasource in LBWE as becoming active.
However the Replicate Metadata fails to bring it into BW QA.
I have discovered that on R/3 QA table Roosource only has the D version and is missing the A version. (both exist in R3 Dev).
Have I missed a step in the activation process.
I didnt install from Business Content as it was already present in LBWE. Also the fact that the D version exists on R3 QA makes me think that activation from RSA5 is not required. Please correct me if I am wrong.
All help appreciated.
Asif

Hi Asif,
After the Datasource activation, did you tried loading / test extraction (RSA3) in Development?
In dev, You can goto RS02 and enter the DS name and try to collect again from there. (Object dir entry.) Then check in your transport request whether you have object type as "OSOA" - Datasource.
Or create an entry in the transport request (R3TR - OSOA - 2LIS_11_VAITM).
Only transport then, it should resolve.
Regards,
Chathia.
Edited by: Chathia_P on Feb 17, 2010 1:14 PM

Similar Messages

  • How to add Z fields from VBPA in datasource 2LIS_11_VAITM in delta mode

    Hi All,
    I'm looking for a method to add Z fields from VBPA (ie order reponsible , account manager , ..) in the datasource 2LIS_11_VAITM
    Of course these fields should be filled in delta process
    Thanks for your help
    Regards
    Sebastien

    Hi,
    You would have to enhance the extract structure and write code to populate this:
    1.1 First alwas Check if fields can't be added using the standard method - Logistics Cockpit (LBWE)
    1.1. Don't think you would be able to fields from table VBPA though which means you have to enhance the extract structure:
    2.1 RSA6 - Enhance Datasource
    2.2 Double Click on Datasource
    2.3 Double Click on Extract Structure
    2.4. Click Append Structure & give a name for the append strcture
    2.5. Add Z-Fields prefixed with "ZZ"
    2.6. Save & Activate
    3. Enhance Datasource (RSA6)
    3.1 New fields are hidden automatically and you must un-tick "hide" check box
    3.2 Save the datasource
    3. Write Code in Transaction CMOD or BADI (SE19) to popoule the Z-Fields.
    If you search for "enhance 2LIS_11_VAITM" in forum you should get a lot of example on how to do this.
    4. Test in RSA3 that your Z-Fields are populated.
    5. Replicate Datsource on BW side to ensure that new fields are transfered from the Source System.
    6. Maintain Infosource, Transfer Rules, Infocube and Update Rules for the new fields.
    Hope it helps.

  • Some records missing while full repair from datasource 2LIS_11_VAITM

    hi friends,
      we are using the datasource 2LIS_11_VAITM.  If we run a full repair with a selection ., say for a particular dealer,  some document numbers are missing.  even if we run a full repair without any selection, same thing happens. 
    we couldnt able to spot out where the records are getting filtered. is there any way to check the datasource for any filterations.
    can anyone tell from which tables the data is flowing to this datasource.

    Hi.
    fill the set up table first for the application 11 for the selections which you want to get pulled in BW.
    A full repair load for a LO data source is pulled from a set up tables and a full repair will pull whatever is in set up tables.
    So fill the set up table for the values which you want to be pulled into BW first.
    I think right now your set up tables do not contain those records which you want in BW.
    Then verify in the t-code RSA3 for the selection and see if you are able to see those records there.
    if its showing up in RSA3 then schedule a full repair and it will show up in BW then.
    The major underlying table are VBAP,VBAK.you can verify the values from there.
    Do not forget do delete the set up tables before filling it.
    Thanks
    Ajeet

  • Datasource not active in BI ?

    I am trying to active the Business content DS .I activated it in RSA5 and also check it in RSA6 on R/3 to make sure the DS is active.I then replicated the DS and once the replication is done when i look at the DS i see it in "Modified "sate rather than on active state.Also the ACtivate icon is grey and I am not able to activate it.Any clue on whts happening here?

    Check the SAP Note <a href="https://websmp102.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=925228">925228</a>. Hope this helps.

  • SPM 2.1 datasource background activity when running report for first time

    Hi All,
    When I log into SPM and click New -> Report, the cursor changes to the timer icon before i drag in a dimension or run a report.
    In SM66 there is an SQL read statement that appears to coincide with this front end behaviour.
    Often this process times out in the front end with a timeout error and "time dimension value help failed".
    Then if i go to create a new report again, a new tab opens, and it opens instantly and there is no SQL read statement.
    Why is an SQL read statement occurring at this point before any data is selected?
    Why does it take so long?
    Many thanks for any help
    Kind regards,
    Neil

    Hello,
    We initialize the time dimension when the reporting console is opened for the first time. Sometimes depending on the load on your server , this could take a long time thus timing out. I would suggest you to look at the load on your java server. Also , check if there are any background processes running on the ABAP side. Also take a look at the timeout limit in Application Properties and see if you can increase this limit.This might help initially.
    As mentioned , the time dimension is only initialized when the reporting console is opened for the fist time in a given session. This explains why you don't see such a behavior subsequently.
    Hope this helps!
    Thanks,
    Madhav

  • How to delete modified version datasource

    I have a datasource in M version and A version. I am getting datasource activation error in BI 7.0
    Please let me know how to delete Modified version.
    Thanks
    Liza

    I removed a field from LO datasource 2LIS_11_VAITM , activated, tested  successfully in R/3.
    I replicated the datasource successfully in BW. But when activate the data source I am getting short  dump ST22 ,the error message is  "  The ASSERT condition was violated".  I am BI 7.0.
    BW side in datasouece I found a not equal to sign ( which means M version is not equal to A version) and datasource is inactive.
    ST22 -
    Short text
        The ASSERT condition was violated.
    Error analysis
        The following checkpoint group was used: "No checkpoint group specified"
        If in the ASSERT statement the addition FIELDS was used, you can find
        the content of the first 8 specified fields in the following overview:
        " (not used) "
        " (not used) "
        " (not used) "
        " (not used) "
        " (not used) "
        " (not used) "
        " (not used) "
        " (not used) "
    Thanks
    Liza

  • Debugger problem while activating Datasource in BW 7.4 Sysytem

    Hi All.
    I am getting very strange problem on BI 7.4. Whenever I try to activate datasource, I get the debugger launched up in a separate window. I have to manually Step Over the code (F6) each time for about 2-3 minutes. Then on the original window, I get message that Datasource is activated.
    However the second debug window is still open with an hourglass. I have to manually STOP TRANSACTION and close that window.
    If I dont Step Over the code then my datasource does not get activated so I have to do this step.
    What could be causing this frustrating problem. Is there a way to disable this debugger..

    Hi Ram,
    Thanks for your inputs.
    still my problem not resolved. Not only data source even if I tried to activate transformation, DTP which installed from BI content & custom DTP also  getting same problem.
    This is not upgraded one, as freshly installed BW 7.4 and couple of hours before only established RFC connection b/w ECC & BW dev systems.
    As per this version all BI content components were installed by basis team.

  • I have activated the standard datasource in r/3? how to identify active?

    Hi All,
    i have activated the standard datasource in r/3 ? and i have replicated the same in the bw system and in the source system of r/3 i have replicated it and i can find the data source there ? but how to identify whether the datasource is active in the bw system or not ?
    i cant see a tick mark on the data source does it determine it is active?
    Pls guide me on this?
    thanks
    Pooja

    Hi all,
    I am working on 3.5
    And where can i find the datasource is green or not? it is not assigned to the source system i can identify it?
    i am not able to rightclik on the datasource and see the active version.
    When i right click on the data source i can see this option:
    1. assign infosource
    2. maintain datasource in the source system etc?
    Thanks
    Pooja

  • Debugger problem while activating Datasource..

    Hi All.
    I am getting very strange problem on BI 7.0. Whenever I try to activate datasource, transformation, DTP or Replicate metadata, I get the debugger launched up in a separate window. I have to manually Step Over the code (F6) each time for about 2-3 minutes. Then on the original window, I get message that Datasource is activated.
    However the second debug window is still open with an hourglass. I have to manually STOP TRANSACTION and close that window.
    If I dont Step Over the code then my datasource does not get activated so I have to do this step.
    What could be causing this frustrating problem. Is there a way to disable this debugger..

    Hi Phunet,
    Just wondering ..
    Is that any debugging command there ?
    If yes, i think you need to remove that command ..
    Hopefully it can help you a lot .
    Regards,
    Niel
    thanks for the points you choose to assign.

  • Activation of ERP Datasource

    Hi All,
    I need to activate DataSource  in ERP to be replicated into BI. When I am doing this I get an error as below.
    Changes to Repository or cross-client Customizing are not permitted.
    Is this an authorization issue with the permissions.
    Appreciate your inputs.
    Kind Regards
    James

    Hi,
    Are you working in the right client in the dev ECC system? We should be activating datasources in the customizing client/golden client in ECC dev. The datasources once activated get copied to the client which is connected to BW. Some changes to datasources like enhancements will not be copied accross clients automatically. We then use SCC1 transaction, give the transport number generated while making changes, to copy across clients.

  • Problem in activating the Hierarchy Datasource for 0CostElmnt

    Hello Experts,
    Can you please suggest, how to activate the standard hierarchy datasource -0costelement for mapping it to the respective hierarchy (0CostElement). For this I have replicated the datasource and activated using BI Content. But inspite of this, respective datasource is not getting activated in SAP BI.
    So can anyone suggest me how to activate the datasource.
    Thanks
    PT

    Hi PT,
    Based on your SAP patch level & error message number, y need to apply SAP note to resolve this error. If you provide correct error message, so we can suggest. Try to active business content grouping the before & after words. Sometime dependent objects my missed also y may get inactive in Transfer rules.
    Thanks & Regards,
    Krishna.

  • Changing Datasource modified version to active version

    Hi all,
            Datasource 2LIS_02_ITM is in modified verison in BW production,After transporting the datasource in R/3 side and replicating  in production ,the datasource is showing still in modified version.Any idea to solve this problem.
    Thanks
    Rabi

    Hi,
    First make sure your datasource is active in R/3 production. You can check this in transaction - LBWE and in RSA3 extraction. If the datasource is inactive, RSA3 extraction gives 0 records.
    If everything is in place in R/3, try to replicate in BI using transaction - RSDS.
    You can also try activating your datasource using the below programms
    RSDS_DATASOURCE_ACTIVATE_ALL
    RS_COMSTRU_ACTIVATE_ALL
    RS_TRANSTRU_ACTIVATE_ALL

  • Active version of emulated 3.x DataSource cannot be displayed

    HI guys,
    I am getting this below error while creating tramsformation object through copy option from another transformation.
    below is the error details:
    Active version of emulated 3.x DataSource 0PROD_CATEG_R3_MAP_ATTR cannot be displayed
    cheerz,
    raps.

    Check note 936644 - 3.x DataSource:No active version displayed in UI (emulation).
    Excerpt from the note:
    To receive an active version of the emulated 3.x DataSource, this has to be assigned to a 3.x InfoSource. You then have to maintain the transfer rules and select "PSA" as the transfer method.
    When you activate the transfer rules, the system generates the transfer structure and a Persistent Staging Area (PSA). You can then emulate the 3.x DataSource as an active version.

  • Datasource Activation/replication issue

    Hi Experts
      Please update me what am i missing
      In R/3
    Development...i activated a Business Content data source and raised a Transport request and imported that transport in to R/3 Quality
    Check R/3 Quality i check RSA3 and datasource is extracting data
    In BW
    Development...I replicated that datasource and activated relevant BW Objects(Transfer rules,Update reules,Infosource,Cube ...etc) and extracted data and raised Transport request
    In BW Quality
    I replicated Same data source.....
    When i check the datasource in display mode it is not in active mode and showing me as in modified mode
    When i tried to import the transport request is raised BW Development itt failed because the datasource is not in active mode
    I checked Source system connection and everything is fine
    We care using BI 7.0
    Please update me how to proceed

    Hi,
          While transporting the transfer rules from Development system to Quality system please capture the datasource replica (object type R3TR ISFS) also in the transport request. This will automatically replicate the active version of your datasource in the BW quality system. Also, before importing the transport request. Please make sure that the source system definition in the BW system is active.
    Hope this helps you.
    Thanks,
    Nithin Reddy.

  • Error while scheduling 2lis_11_Vaitm

    Hi Gurus,
    I am getting the following error, when i am scheduling DS "2lis_11_Vaitm".
    Operation could not be carried out for
    Transformation does not exist (see long text)
    Transformation does not exist (see long text)
    Postprocessing PSA /BIC/B0000123 failed (rc = 1)
    Error when activating DataSource 2LIS_11_VAITM S01LO100
    Operation could not be carried out for
    Transformation does not exist (see long text)
    Transformation does not exist (see long text)
    Postprocessing PSA /BIC/B0000123 failed (rc = 1)
    Error when resetting DataSource 2LIS_11_VAITM S01LO100 to the active version
    Operation could not be carried out for
    Transformation does not exist (see long text)
    Transformation does not exist (see long text)
    Postprocessing PSA /BIC/B0000123 failed (rc = 1)
    Error when activating DataSource 2LIS_11_VAITM S01LO100
    Operation could not be carried out for
    Transformation does not exist (see long text)
    Transformation does not exist (see long text)
    Postprocessing PSA /BIC/B0000123 failed (rc = 1)
    Error when resetting DataSource 2LIS_11_VAITM S01LO100 to the active version
    Please help me. Thanks in advance.
    Thanks & Regards
    Manna Das

    Hi,
    Please refer to following notes:
    0001142908 70SP19: BDLS does not convert DTPs
    0001266603 Re-importing into source system deletes routines & formulas
    0001292311 Extraction monitor probs. for transformations from migration
    0001369395 Transformations generated from migration: Repair tools
    0001432815 BDLS does not convert DTP: See description for constraints
    Thanks & Regards,
    Vipin

Maybe you are looking for