Datasource 2LIS_44_POSREC
Hi All,
Anybody has ever used datasource 2LIS_44_POSREC for IS-Retail ?
I have just activated this from BI Content. I noticed that this datasouce is part of the LO Cockpit. However, I didn't manage to find anything related to its setup table execution.
Anybody can share how to do data extraction using this datasource ?
Thanks.
Regards,
Handoko
hi,
check the datasource - 2LIS_44_POSREC in tcode - RSA2 .
You will get the details of its extracation ..
Regards ,
Lokesh
Similar Messages
-
Hi
How to populate data for 2LIS_40_REVAL, 2LIS_43_POSCAS and 2LIS_44_POSREC datasources at RSA3?
I'm very new to retail BI.
I think there is no setup tables for Retail infosources.
Any IDoc or BAPI activation is required or other procedure?
We are in BI-700 SAPKW70015 support pack R/3 side
and SAP_BW 700 Support pack SAPKW70016 &
BI_CONT 703 Support pack SAPKIBIIP9 BI side
Can anyone guide me how to load data?
Points assured
Thanks in advance
Ramana PDear Ramana,
There is no setup table for POSCAS and POSREC.This has to be popuated with a BADI Implementation.
As of PlugIns 2002_1_470 and 2002_2_470, POS data is update into BW the 2LIS_44_POSREC and 2LIS_43_POSCAS extractors using a BADI. To be able to update data into BW, the relevant implementation for the BADI must be activated in each case. You can activate the implementation in transaction SE19. The implementations are as follows:
POS_EX_REC_PI2003_1 for extractor 2LIS_44_POSREC
POS_EX_CAS_PI2003_1 for extractor 2LIS_44_POSCAS
Once the activation of BADI , create the back ground jobs for the 44 application and the data is pushed into Delta queue and it can be loaded into BI .
Hope this helps you.
Thanks,
Krishna Charan -
There are still no BW systems connected to the Datasource
Hi All,
We are currently implementing BW retail project and trying to retrieve POS data using IDOCs through PIPE but we are facing a problem when we try to process idoc from POS workbench (/POSDW/MON0).We are sending idocs(WBUPON- POS interface: Upload sales docs (receipts) non-aggregated) using transaction we19 and then when we go to the POS workbench and try to process related idocs choosing supply bw immediately ...etc option after this we are getting the following error with a message class RSQU and message no 10.
<b>There are still no BW systems connected to the Datasource</b> I am working on BW side with datasources such as 2LIS_43_poscas and 2LIS_44_posrec.
Our system is SAP BI 7.0 with support package level 12.Can you please suggest something on this problem
Is there anyone who has experienced this kind of problem.Could you please give a look and share your solutions with me OR can somenone show how to transfer pos data into BW system.
Waiting for rewarding points for good answers.
Thanks in Advance,
Regards,
#Bill J.Satish ,
Thank you very much for the answer but my r3 system is ecc 5.0 so this note is suitable for it ? What else can you suggest related to this problem ?
Thanks & Regards,
#Bill J. -
Database connection timeouts and datasource errors
Connections in the pool randomly die overnight. Stack traces show that for some reason, the evermind driver is being used even though the MySql connection pool is specified.
Also, the evermind connection pool is saying connections aren't being closed, and the stack trace shows they're being allocated by entity beans that are definitely not left hanging around.
Sometimes we get non-serializable errors when trying to retrieve the datasource (this is only after the other errors start). Some connections returned from the pool are still good, so the application limps along.
EJBs and DAOs both use jdbc/SQLServerDSCore.
Has anyone seen this problem?
<data-sources>
<data-source
class="com.mysql.jdbc.jdbc2.optional.MysqlConnectionPoolDataSource"
name="SQLServerDSCore"
location="jdbc/SQLServerDSCore"
xa-location="jdbc/xa/SQLServerXACore"
ejb-location="jdbc/SQLServerDSCore"
connection-driver="com.mysql.jdbc.Driver"
min-connections="5"
username="xxx"
password="xxx"
staleness-timeout="3600"
alive-poll-query="SELECT 1 FROM medispan"
url="jdbc:mysql://1.2.3.4:3306/dbo?autoReconnect=true&autoReconnectForPools=true&cachePrepStmts=true&is-connection-validation-required=true"
inactivity-timeout="30"
>
<property name="autoReconnect" value="true"/>
<property name="autoReconnectForPools" value="true"/>
<property name="is-connection-validation-required" value="true"/>
<property name="cachePrepStmts" value="true"/>
</data-source>
</data-sources>Rick,
OC4J 9.0.4.0.0 - BTW, do you know of any patches?As far as I know, there are no patches for the 9.0.4
production version of OC4J stand-alone.
I'm using container managed persistence,It was not clear to me, from your previous post, that you
are using CMP entity beans.
I found staleness-timeout and alive-poll-query
somewhere on a website when trying to track this
down. Here's four sources:Those sources refer to OrionServer -- and an older version, too, it seems.
Like all other Oracle products that start out as somebody
else's -- including, for example, JBuilder (that became "JDeveloper"), Apache Web Server (that became "Oracle HTTP Server") and TopLink -- their development paths diverge, until, eventually, there is absolutely no similarity between them at all. Hence, the latest versions of OC4J and "OrionServer" are so different, that you cannot be sure that something that works for "OrionServer" will work for OC4J.
I recall reading something, somewhere, sometime about configuring OC4J to use different databases (other than Oracle), but I really don't remember any details (since it was not relevant to me, because we only use Oracle database). In any case, it is possible to use a non-Oracle database with OC4J.
Good Luck,
Avi. -
Possible to change the datasource from a business-view to a Sql Command ?
Hello,
When a business view contains a lot of elements it takes a while just to open the report.
We'd like to keep the BV as the dictionnary, but,
once the report design completed,
we'd like to disconnect the business view and replace it by the Sql command which can be seen in the menu option 'show SQL query'.
Is it possible via the RAS sdk ?
Did somebody experience this ?
How to proceed ?
Thanks a lot
AlainHi Ted,
I'm thinking opening a Case for this problem of opening reports based on a big BV.
We can't really reduce the BV, since it is the dictionnary and we need the whole thing...
I'm wondering why it is impossible to change the Datasource if the tables and fields underneath are identical.
Is it impossible to change the fields' mapping ?
The other solution, as you suggest, is to create a report from scratch, create a new Datasource with the Sql command format, and rebuild the report... I agree it looks like a big job...
Do you know if it is possible to export the report in XML for instance, change the XML, and then re-import ?
Thanks for your Help.
Alain -
Getting following error while creating a datasource connection with oracle database.
I have 32 bit oracle server installed in remote server.
and 64 bit sql server 2008 r2 report server installed, and 64 bit oracle client installed on my report server while create a new datasource
in the report server i am getting this error
Error
Attempt to load Oracle client libraries threw BadImageFormatException. This problem will occur when running in 64 bit mode with the 32 bit Oracle
client components installed
How can i fix this and let me know the reasonThis link will help you out.
http://social.msdn.microsoft.com/Forums/en-US/sqlreportingservices/thread/0a38fa00-31de-49de-b68f-4c5a4565e5b1?prof=required
Milan Das -
Error while creating datasource
I am getting this error while creating the datasource on console of html page.
java.lang.NullPointerException
at weblogic.management.console.utils.MBeans.getMBeanClassNameFor(MBeans.java:1153)
at weblogic.management.console.actions.mbean.EditMBeanAction.getMBeanClass(EditMBeanAction.java:210)
at weblogic.management.console.actions.mbean.EditMBeanAction.getDialogTypeKey(EditMBeanAction.java:188)
at weblogic.management.console.actions.internal.InternalActionContext.setAction(InternalActionContext.java:158)
at weblogic.management.console.actions.internal.ActionServlet.doAction(ActionServlet.java:170)
at weblogic.management.console.actions.internal.ActionServlet.doPost(ActionServlet.java:85)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:945)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:332)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:242)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:5360)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:721)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3043)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2468)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:152)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:133)well thankx for the inputs. well but te screen dosent move from tht point. as we enter a datasource name, it gives this error. and we havent logged into anywhr to give the access credentials.
am wondering how then whts the point in knowing the username and pwd if i give edit datasource .
thankx -
Error while adding a datasource to an index
Hi,
I am creating an index with a file system repository. I have to create a taxonomy on that index to classify all the documents inside the repository. When i am trying to assign a datasource to the index i am getting the following error
"The repository needs the properties service to be attached to a classification index"
Can anybody help me?
Thanks in Advance
PrakashHi Prakash,
what you have to do is to edit the file system repository you want to assign as datasource to the index.
(Content Management -> Repository Mangers -> File System Repository -> Mark "Your FS Repository" -> Edit)
Go through the list of Repository Services (click on Next Page) and activate (mark) the "properties" Repository Service.
After saving and restarting! the J2EE Engine you should be able to add the datasource to the classification index.
Hope this helps,
Robert -
Error while creating a datasource in planning 9.3.1 on oracle 11.2 database
I am unable to create datasource in planning 9.3.1 on oracle 11.2 database. I have configure sharedservices and registered planning with shared servers. I am unable to create data source after application deployment and instance creation.
I am getting the following error,
Launching Hyperion Configuration Utility Program
HYPERION_HOME: C:\Hyperion
In HspDBPropertiesLocationPanel constructor
In HspDBPropertiesLocationPanel queryEnter
Resource Bundle is java.util.PropertyResourceBundle@322394
Product Name in file is PLANNING
Availability Date is 20051231
Creating rebind thread to RMI
Resource Bundle is java.util.PropertyResourceBundle@322394
Product Name in file is PLANNING
Availability Date is 20051231
$$$$$$$$$$$$$ dname is
Resource Bundle is java.util.PropertyResourceBundle@322394
Product Name in file is PLANNING
Availability Date is 20051231
Exception in thread "AWT-EventQueue-0" java.lang.UnsatisfiedLinkError: no HspEss
baseEnv in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseEnv.<clinit>(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseJniOlap.<clinit>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.TestEssConnection(Unknown Source)
at com.hyperion.planning.HspDSEssbasePanelManager.TestEssConnection(HspD
SEssbasePanelManager.java:156)
at com.hyperion.planning.HspDSEssbasePanelManager.queryExit(HspDSEssbase
PanelManager.java:132)
at com.hyperion.cis.config.wizard.ProductCustomInputPanel.queryExit(Prod
uctCustomInputPanel.java:114)
at com.installshield.wizard.awt.AWTWizardUI.doNext(Unknown Source)
at com.installshield.wizard.awt.AWTWizardUI.actionPerformed(Unknown Sour
ce)
at com.installshield.wizard.swing.SwingWizardUI.actionPerformed(Unknown
Source)
at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationControlle
r.notifyListeners(Unknown Source)
at com.installshield.wizard.swing.SwingWizardUI$SwingNavigationControlle
r.actionPerformed(Unknown Source)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Sour
ce)
at java.awt.Component.processMouseEvent(Unknown Source)
at javax.swing.JComponent.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
But, My essbase server is up and running. I am able to connect it through EAS.It looks like more of an issue with connecting to essbase, usually "java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.library.path" means planning has not been installed or deployed correctly, what OS is it running on?
Cheers
John
http://john-goodwin.blogspot.com/ -
Error while transporting webservice datasources
Hi all,
I have created webservice datasources to fetch EP data to BW. and now i am transporting that Datasources from DEV to QA. I have colllected datasources alone in one req. (source system i have created in QA manually and i mapped that with DEV)
But while transporting i am getting the folllowing error,
3S3T Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Error Screen output without connection to user .
Error when activating DataSource ZANS_MASTER BI7001
Please through some light is there any predefined settings i need to do in QA system?.
Thanks in advance,
V.SenDear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh -
Error while transporting Datasources in Production
Dear All,
I have facing a problem while transporting objects pertaining to BI Cockpit in Production.
Earlier I had transported all the obects (in more than one transports) in Quality (from Development). After testing the objects, I had imported the same number of transports (and in the same order) to Production and now some of the requests have ended in errors like:
DataSource 0TCTWHMTFM_TEXT does not exist in source system PW1CLNT003 of version A
Such errors have occured for most of the Datasources.
Can anyone let me know
1) Why the transports have failed while importing in Production when similar requests have been transported successfully to Quality.
2) The possible solution to correct the error.
Request your kind help to overcome this problem.
Regards
ShalabhDear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh -
Error while transporting custom datasource
Hi All,
Below is the scenario that was carried out in my project.
1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
2. Created a custom Datasource ZABC_TEST with the above table.
3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
4. Tried transporting the above. But trows error while transporting the data source.
Error -- InfoSource ZABC_TEST is not available in source system BITST.
Let me know what can be done to solve the above error. Please suggest if i have missed out something.
Thanks in advance.
MaddyHI,
The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
Transport first the DS in a request, then in another request transport the OHD.
This should resolve the issue.
hope this helps.
thanks,
rahul -
Error while transporting a WEBservice Datasource
Hi all,
I am trying to transport a web service datasource(PI data to BW) in testing system . But while transporting ,I get the following error in the logs of my transport request.
Error generating the Web service /BIC/CQZPI_KPI00002000
This is not an authorization issue as I have got the required authorizations from the basis team .
Can anyone please give me some solution to this error.
Many Thanks in AdvanceHi.
Did you checked the following notes to solve this issue?
1177867 Error while deleting Web service in BI After Import
1177005 Error while activating/deleting Web service in BI
1170688 DataSource: Missing replication in transport
Please check also if Myself connection was correctly set in your system.
538052 Maintenance of Myself destination in BW.
Please check if enough authorizations were assigned to user who is
transporting this request.
913944-Error RSDS 301 when you activate a Web Service Data
Please try to check the data format. Check if some fields are mentioned in
logs and set them to EXTERNAL before the transport.
Please try also to activate the DataSource in the source system and
then create a new transport request and transport it.
I hope I can be helpful.
Thanks,
Walter Oliveira. -
Error while transporting Generic Datasource in R/3
Hi All,
I have created a generic datasource(R/3) on a view. As it was in $TMP, I have assigned the datasource, ZABCD, and the view, ZVIEW to a devlopment package and also to a transport request. I released the Transport request and when I tried to import it into Q, it throwed me an error with below messages:
Extract structure ZOX**** is not active
The extract structure ZOX**** of the DataSource ZABCD is invalid
Errors occurred during post-handling RSA2_DSOURCE_AFTER_IMPORT for OSOA L
The errors affect the following components:
BC-BW (SAP Business Information Warehouse Extractors)
The extract structure ZOX**** is the structure used by the datsource. I forgot to assign that to the earlier TR and I think the error is because the structure is missing in the TR. Am I correct?
How should I deal with it now? DO I need to create a new TR with this structure alone as the earlier TR is already released?
Thanks,
RPK.As you comment it is possible error was not include the structure in earlier TR.
You can create, in se09 or se10, an empty TR. In these transactions you have a buttoun with a box drawed. Set focus on your new empty TR and push button.
Add object from TR transported with error and the missed structure. -
Error while configuring kodo to lookup a datasource
We had a working application using EEPersistenceManagerFactory
I changed the kodo.properties to lookup a non XA JDBC datasource.
After that the application is working fine (it creates
,updates,deletes,finds record in the DB)
but SystemOut.log has the following error for every operation
We are using Kodo 2.5.0, Websphere 5.0 and Oracle 8
How can we avoid getting this error ?.
We tried to find any property on the Websphere datasource which can be
altered to avoid this error but no luck.
Thanks
Paresh
[10/7/03 15:30:45:467 IST] 3d8b2d1a MCWrapper E J2CA0081E: Method
destroy failed while trying to execute method destroy on ManagedConnection
com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl@437f6d23 from resource
<null>. Caught exception: com.ibm.ws.exception.WsException: DSRA0080E: An
exception was received by the Data Store Adapter. See original exception
message: Cannot call 'cleanup' on a ManagedConnection while it is still in
a transaction..
at
com.ibm.ws.rsadapter.exceptions.DataStoreAdapterException.<init>(DataStoreAdapterException.java:222)
at
com.ibm.ws.rsadapter.exceptions.DataStoreAdapterException.<init>(DataStoreAdapterException.java:172)
at
com.ibm.ws.rsadapter.AdapterUtil.createDataStoreAdapterException(AdapterUtil.java:182)
at
com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl.cleanupTransactions(WSRdbManagedConnectionImpl.java:1826)
at
com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl.destroy(WSRdbManagedConnectionImpl.java:1389)
at com.ibm.ejs.j2c.MCWrapper.destroy(MCWrapper.java:1032)
at
com.ibm.ejs.j2c.poolmanager.FreePool.returnToFreePool(FreePool.java:259)
at com.ibm.ejs.j2c.poolmanager.PoolManager.release(PoolManager.java:777)
at com.ibm.ejs.j2c.MCWrapper.releaseToPoolManager(MCWrapper.java:1304)
at
com.ibm.ejs.j2c.ConnectionEventListener.connectionClosed(ConnectionEventListener.java:195)
at
com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl.processConnectionClosedEvent(WSRdbManagedConnectionImpl.java:843)
at
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.closeWrapper(WSJdbcConnection.java:569)
at com.ibm.ws.rsadapter.jdbc.WSJdbcObject.close(WSJdbcObject.java:132)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.close(SQLExecutionManagerImpl.java:814)
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.release(JDBCStoreManager.java(Inlined
Compiled Code))
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.load(JDBCStoreManager.java(Compiled
Code))
at
com.solarmetric.kodo.runtime.StateManagerImpl.loadFields(StateManagerImpl.java(Compiled
Code))
at
com.solarmetric.kodo.runtime.StateManagerImpl.preSerialize(StateManagerImpl.java:784)
at com.paresh.core.vo.Release.jdoPreSerialize(Release.java)
at com.paresh.core.vo.Release.writeObject(Release.java)
at java.lang.reflect.Method.invoke(Native Method)
at
com.ibm.rmi.io.IIOPOutputStream.invokeObjectWriter(IIOPOutputStream.java:703)
at com.ibm.rmi.io.IIOPOutputStream.outputObject(IIOPOutputStream.java:671)
at
com.ibm.rmi.io.IIOPOutputStream.simpleWriteObject(IIOPOutputStream.java:146)
at
com.ibm.rmi.io.ValueHandlerImpl.writeValueInternal(ValueHandlerImpl.java:217)
at com.ibm.rmi.io.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:144)
at com.ibm.rmi.iiop.CDROutputStream.write_value(CDROutputStream.java:1590)
at com.ibm.rmi.iiop.CDROutputStream.write_value(CDROutputStream.java:1107)
at
com.paresh.core.interfaces._EJSRemoteStatelessValidation_da16513c_Tie.findCorrectionAction(_EJSRemoteStatelessValidation_da16513c_Tie.java:309)
at
com.paresh.core.interfaces._EJSRemoteStatelessValidation_da16513c_Tie._invoke(_EJSRemoteStatelessValidation_da16513c_Tie.java:104)
at
com.ibm.CORBA.iiop.ServerDelegate.dispatchInvokeHandler(ServerDelegate.java:582)
at com.ibm.CORBA.iiop.ServerDelegate.dispatch(ServerDelegate.java:437)
at com.ibm.rmi.iiop.ORB.process(ORB.java:320)
at com.ibm.CORBA.iiop.ORB.process(ORB.java:1544)
at com.ibm.rmi.iiop.Connection.doWork(Connection.java:2063)
at com.ibm.rmi.iiop.WorkUnitImpl.doWork(WorkUnitImpl.java:63)
at com.ibm.ejs.oa.pool.PooledThread.run(ThreadPool.java:95)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:592)
kodo.properties
com.solarmetric.kodo.LicenseKey=
#com.solarmetric.kodo.ee.ManagedRuntimeProperties=TransactionManagerName=java:/TransactionManager
com.solarmetric.kodo.ee.ManagedRuntimeProperties=TransactionManagerName=TransactionFactory
TransactionManagerMethod=com.ibm.ejs.jts.jta.TransactionManagerFactory.getTransactionManager
#com.solarmetric.kodo.ee.ManagedRuntimeClass=com.solarmetric.kodo.ee.InvocationManagedRuntime
com.solarmetric.kodo.ee.ManagedRuntimeClass=com.solarmetric.kodo.ee.AutomaticManagedRuntime
#javax.jdo.PersistenceManagerFactoryClass=com.solarmetric.kodo.impl.jdbc.JDBCPersistenceManagerFactory
javax.jdo.PersistenceManagerFactoryClass=com.solarmetric.kodo.impl.jdbc.ee.EEPersistenceManagerFactory
javax.jdo.option.ConnectionFactoryName=ds/kodo/DataSource1
javax.jdo.option.Optimistic=true
javax.jdo.option.RetainValues=true
javax.jdo.option.NontransactionalRead=true
#com.solarmetric.kodo.DataCacheClass=com.solarmetric.kodo.runtime.datacache.plugins.CacheImpl
# Changing these to a non-zero value will dramatically increase
# performance, but will cause in-memory databases such as Hypersonic
# SQL to never exit when your main() method exits, as the pooled
# connections in the in-memory database will cause a daemon thread to
# remain running.
javax.jdo.option.MinPool=5
javax.jdo.option.MaxPool=10We do have a makeTransientAll() before the object returns from Session
Bean.
We also tried the JCA path
After installing the JCA RAR and doing a lookup for
PersistenceManagetFactory the same code is not throwing any exception.
The exception is thrown only if datasource is used.
Thanks
Paresh
Marc Prud'hommeaux wrote:
Paresh-
It looks like you are returning a collection of instances from an EJB,
which will cause them to be serialized. The serialization is happening
outside the context of a transaction, and Kodo needs to obtain a
connection. Websphere seems to not like that.
You have a few options:
1. Call makeTransientAll() on all the instances before you return them
from your bean methods
2. Manually instantiate all the fields yourself before sending them
back. You could use a bogus ObjectOutputStream to do this.
3. In 3.0, you can use the new detach() API to detach the instances
before sending them back to the client.
In article <[email protected]>, Paresh wrote:
We had a working application using EEPersistenceManagerFactory
I changed the kodo.properties to lookup a non XA JDBC datasource.
After that the application is working fine (it creates
,updates,deletes,finds record in the DB)
but SystemOut.log has the following error for every operation
We are using Kodo 2.5.0, Websphere 5.0 and Oracle 8
How can we avoid getting this error ?.
We tried to find any property on the Websphere datasource which can be
altered to avoid this error but no luck.
Thanks
Paresh
[10/7/03 15:30:45:467 IST] 3d8b2d1a MCWrapper E J2CA0081E: Method
destroy failed while trying to execute method destroy on ManagedConnection
com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl@437f6d23 from resource
<null>. Caught exception: com.ibm.ws.exception.WsException: DSRA0080E: An
exception was received by the Data Store Adapter. See original exception
message: Cannot call 'cleanup' on a ManagedConnection while it is still in
a transaction..
at
com.ibm.ws.rsadapter.exceptions.DataStoreAdapterException.<init>(DataStoreAdapterException.java:222)
at
com.ibm.ws.rsadapter.exceptions.DataStoreAdapterException.<init>(DataStoreAdapterException.java:172)
at
com.ibm.ws.rsadapter.AdapterUtil.createDataStoreAdapterException(AdapterUtil.java:182)
at
com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl.cleanupTransactions(WSRdbManagedConnectionImpl.java:1826)
at
com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl.destroy(WSRdbManagedConnectionImpl.java:1389)
at com.ibm.ejs.j2c.MCWrapper.destroy(MCWrapper.java:1032)
at
com.ibm.ejs.j2c.poolmanager.FreePool.returnToFreePool(FreePool.java:259)
at com.ibm.ejs.j2c.poolmanager.PoolManager.release(PoolManager.java:777)
at com.ibm.ejs.j2c.MCWrapper.releaseToPoolManager(MCWrapper.java:1304)
at
com.ibm.ejs.j2c.ConnectionEventListener.connectionClosed(ConnectionEventListener.java:195)
at
com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl.processConnectionClosedEvent(WSRdbManagedConnectionImpl.java:843)
at
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection.closeWrapper(WSJdbcConnection.java:569)
at com.ibm.ws.rsadapter.jdbc.WSJdbcObject.close(WSJdbcObject.java:132)
at
com.solarmetric.kodo.impl.jdbc.SQLExecutionManagerImpl.close(SQLExecutionManagerImpl.java:814)
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.release(JDBCStoreManager.java(Inlined
Compiled Code))
at
com.solarmetric.kodo.impl.jdbc.runtime.JDBCStoreManager.load(JDBCStoreManager.java(Compiled
Code))
at
com.solarmetric.kodo.runtime.StateManagerImpl.loadFields(StateManagerImpl.java(Compiled
Code))
at
com.solarmetric.kodo.runtime.StateManagerImpl.preSerialize(StateManagerImpl.java:784)
at com.paresh.core.vo.Release.jdoPreSerialize(Release.java)
at com.paresh.core.vo.Release.writeObject(Release.java)
at java.lang.reflect.Method.invoke(Native Method)
at
com.ibm.rmi.io.IIOPOutputStream.invokeObjectWriter(IIOPOutputStream.java:703)
at com.ibm.rmi.io.IIOPOutputStream.outputObject(IIOPOutputStream.java:671)
at
com.ibm.rmi.io.IIOPOutputStream.simpleWriteObject(IIOPOutputStream.java:146)
at
com.ibm.rmi.io.ValueHandlerImpl.writeValueInternal(ValueHandlerImpl.java:217)
at com.ibm.rmi.io.ValueHandlerImpl.writeValue(ValueHandlerImpl.java:144)
at com.ibm.rmi.iiop.CDROutputStream.write_value(CDROutputStream.java:1590)
at com.ibm.rmi.iiop.CDROutputStream.write_value(CDROutputStream.java:1107)
at
com.paresh.core.interfaces._EJSRemoteStatelessValidation_da16513c_Tie.findCorrectionAction(_EJSRemoteStatelessValidation_da16513c_Tie.java:309)
at
com.paresh.core.interfaces._EJSRemoteStatelessValidation_da16513c_Tie._invoke(_EJSRemoteStatelessValidation_da16513c_Tie.java:104)
at
com.ibm.CORBA.iiop.ServerDelegate.dispatchInvokeHandler(ServerDelegate.java:582)
at com.ibm.CORBA.iiop.ServerDelegate.dispatch(ServerDelegate.java:437)
at com.ibm.rmi.iiop.ORB.process(ORB.java:320)
at com.ibm.CORBA.iiop.ORB.process(ORB.java:1544)
at com.ibm.rmi.iiop.Connection.doWork(Connection.java:2063)
at com.ibm.rmi.iiop.WorkUnitImpl.doWork(WorkUnitImpl.java:63)
at com.ibm.ejs.oa.pool.PooledThread.run(ThreadPool.java:95)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:592)
kodo.properties
com.solarmetric.kodo.LicenseKey=
#com.solarmetric.kodo.ee.ManagedRuntimeProperties=TransactionManagerName=java:/TransactionManager
>>
>
com.solarmetric.kodo.ee.ManagedRuntimeProperties=TransactionManagerName=TransactionFactory
>>
>
TransactionManagerMethod=com.ibm.ejs.jts.jta.TransactionManagerFactory.getTransactionManager
>>
>>
>
#com.solarmetric.kodo.ee.ManagedRuntimeClass=com.solarmetric.kodo.ee.InvocationManagedRuntime
>>
>
com.solarmetric.kodo.ee.ManagedRuntimeClass=com.solarmetric.kodo.ee.AutomaticManagedRuntime
>>
>>
>
#javax.jdo.PersistenceManagerFactoryClass=com.solarmetric.kodo.impl.jdbc.JDBCPersistenceManagerFactory
>>
>
javax.jdo.PersistenceManagerFactoryClass=com.solarmetric.kodo.impl.jdbc.ee.EEPersistenceManagerFactory
>>
javax.jdo.option.ConnectionFactoryName=ds/kodo/DataSource1
javax.jdo.option.Optimistic=true
javax.jdo.option.RetainValues=true
javax.jdo.option.NontransactionalRead=true
#com.solarmetric.kodo.DataCacheClass=com.solarmetric.kodo.runtime.datacache.plugins.CacheImpl
>>
>>
# Changing these to a non-zero value will dramatically increase
# performance, but will cause in-memory databases such as Hypersonic
# SQL to never exit when your main() method exits, as the pooled
# connections in the in-memory database will cause a daemon thread to
# remain running.
javax.jdo.option.MinPool=5
javax.jdo.option.MaxPool=10
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com
Maybe you are looking for
-
How do i put films on my i-pod?
I`ve got an i-phone 5 and an i-pod classic, and i can`t seem to put films on to them, in the past ive been able to put films on my i-pod?
-
How to display russian from a an html file created in textedit?
I have created an html page in textedit which contains some russian text, how can i get safari to display this text properly?? In my textedit i used plain text but for some reason it comes out all starange in safari....
-
EA6500 - interface not loading after removing dhcp option
Hi, I just configured my brand new ea6500. User interface looks very dummy-proof btw. I have setup my internet connection .. configured the wireless ect .. Since I changed the setting that the router doesn't has to be dhcp i can't connect to the inte
-
Help appending dtd's to XML programmatically(SAX parser)
Hi If i want to validate an xml by writing a dtd and if i want to append that dtd to my xml programattically then how will i do it i am using java's sax parser currently . can any one help me out. Reply will b appritiated Regards Geetanjali P.
-
U430Touch - Touchscreen problem
Hi all, i have a strange behaviour when I connect a usb mouse + my speekers via usb to the u430 touch. When i connect them both my touchscreen isn't working anymore. I also tried the combination with mouse + smartphone - same problem. It looks like i