Datasource abcd cannot cannot be replicated ( see time stamp, longtext)

Hi friends,
If this is a load error , then just replicating data source from source systems( RSA1--source systems-) is sufficine tor i should do more than this?
regards,
siddhu

Hi,
Initially check the connection between the systems.
Get into the source system and check whether the datasource is transfered or not.If not transfered transfer it.Now replicate the datsource.
If everything is ok and still data is not loaded , you may do like this ...
After replication of the data sources you need to activate once agin the TR mapping. Then you can load the data.
Regards,
Durga
Message was edited by:
Durga Prasad Ch

Similar Messages

How do I see the time stamp from footage

I was wondering if it is possible to see time stamps from footage taken by GoPro camera in FCPX. I can see the duration of the clips and the DATE it was created. I would like to see the actual time it was created. I have 2 cameras that were shooting at the same time and I would like an easier way of sifting through all of the clips to mary them up.
Is there a way to see the time stamp of when the video was taken?
Thanks

Got ya. I will suggest one more thing: You can add "markers" at points where you can visually (or aurally) see (or hear) a synch point. Once you add these markers, "synchronize clip" will begin to grind out the rest.
Again, if you look at the above tutorial, I think it explains this under "manual" synch.
I don't mean to push this upon you, but... FCPX is GREAT for multi-cam synch. It is the best--I think--in the industry.
Good luck. Sorry if I'm of little help beyond this.

Is there a way to turn on time stamps for all text messages?

I want to time stamp all my messages not just select ones...is this possible

Just swipe the text bubbles to the left to see time stamps for all messages you sent.

Cannot see Time Capsule for backup but internet perfect A

I've seen other posts about time capsule problems and most talk about wireless dropout and loss of internet connectivity. My situation is almost the reverse:
Full airport strength in menu bar. Full access to internet sites on at least one computer. Cannot see Time Capsule via Airport Utility or in Finder on any computer. Time Machine backups fail (marked as Delayed in menu bar item).
If I reboot (via unplugging) the Time Capsule, it shows up again in Airport Utility and backups are successful. This has happened three times now. I think the first time was prior to upgrading the firmware. The second two times were after the Time Capsule firmware upgrade. In the second two instances, it looks like the backups run for about 12-13 hours, every hour. No problems. Then, they drop out. Yesterday, it ran from 8:30 AM until 9 PM.
I've got two Macs (a Powerbook G4 and a MacBook Pro), each running latest software updates (security, 10.5.2, etc.).
Unplugging (rebooting) my Time Capsule each day is not an option. That's partly why I moved from an ancient LinkSys router that always needed to be rebooted since we lost local and internet access. Any help is much appreciated!
Cheers,
Drew

Have you set up the TC with user accounts??
Most people just use the TC password..
I have done very little with user accounts on the TC.. it seems fundamentally wrong headed to me.. If you have a domain controller with everyone using accounts to login that is fine.. and the TC would then exist in connection to the domain controller.. but it is a home device and there is no function to all that.
What will happen if you change over to standard security or even turn on the guest account I am too scared to suggest as you may not easily get connection back again.. The TC certainly displays a warning going to accounts.. I am not sure of warnings going away from accounts.
If you didn't setup the TC, do you have admin access to it??
Perhaps I am assuming too much before you tell me everything. But I may suggest things you don't want to try.. unfortunately I cannot say this will work.. the issue is widespread across the Mountain Lion TC combo and I have yet to see Apple suggest a solution or even fess up there is a problem. Daily reboots are just simply now a part of the scene for all windows and Mac users.
Is the TC the main router for the network.. 1 hour is not default lease in the TC and very few people even know how to change it.. standard is 1day. I would consider 1hr adequately short for all arp tables to be kept up to date.. the computer should be seeking new lease at 30min.. ie half lease time.
If the TC is bridged an not controlling the network.. that can contribute to the issue.
Setting a static IP on the TC if it is bridged my help.

DataSource has to be replicated (time stamp, see long text)

Hi Experts,
in Production i am getting an error like below
DataSource has to be replicated (time stamp, see long text)
@5C@ Errors in source system @35@
Message no. R3016
Diagnosis
DataSource 8ZCRFAC03 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.04.2011 12:56:44.
The time stamp in the BW system is 19.04.2011 12:29:02.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
i replicated data source and activated transfer rules giving source system and infosource but still it is failing with same message
what went wrong not able to understand
Please help,
Thanks in Advance
Nitya

Seems to be an incorrect transport sequence:
1. First transport you DS from source system R/3 QA to R/3 Prd
2. Once it is successfully transported to R/3 PRD, Replicate DS in BI PRD
4. Now try to collect your infosource, DS, TR in transport request & try to transport it from BI QA to BI PRD.
5. Once it is successfully replicated in Production try Running the loads
It should work.
Regards
Raj

DataSource 8ABCD_K01 has to be replicated (time stamp, see long text)

Hi,
We copied SCM production system to SCM quality system and after that I tried to run forecast process chain.
I got the following error message when process chain tried to extract sales history and failed:
DataSource 8ABCD_K01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 8ABCD_K01 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 19.12.2008 23:55:19.
The time stamp in the BW system is 01.07.2008 01:51:43.
System Response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Errors in source system
Message no. RSM340
I never did this activity (data source replication)before.I'll appreciate if somebody can help me and provide step by step process to how to do it?
Thanks
Kumar

Thanks for prompt respons Julien.
STEP1:
In SCM quality system, I went in RSA1-- > Infoprovider-> Data source->Right click there --->replicate metadata
got popup message :
Message no. TK730
Diagnosis
In this logon client, any changes to the Repository and to cross-client Customizing objects are prohibited.
System Response
The function terminates
Procedure
If you still want to make the changes, contact the system administrator, who can allocate you a user in a client where you can make the changes.
STEP2:
When I ran the program RS_TRANSTRU_ACTIVATE_ALL ,
entered source system : BW....CLNT...
Infosource : 8ABCD_K01
got following log :
No Transfer Structure Selected
Message no. RSAR051
Do I need to do run data source replication process in SCM developement and then trasport to quality? Is there any pre/post requisite or step i missed.
Thanks

Since upgrading to Mountain Lion, I cannot restore emails with time machine. In Lion TM created a folder in Mail called recovered emails(or similar) No such folder is created since ML. I am able to see the email I want to restore, but it then disappears

Since upgrading to Mountain Lion, I cannot restore emails with time machine. In Lion TM created a folder in Mail called recovered emails(or similar) No such folder is created since ML. I am able to see the email I want to restore, but it then disappears

I am inside Mail, waiting for the TM 'recovered mail' folder to appear - which it doen't.
I only looked in my home folder after trying several times from within my Main app.
Marion

Time machine cannot see time capsule event though I have a green light

I have a green light on my time capsule but time machine on my macbook pro cannot no longer see the time capsule. i have gone through the procedures to find it and reset the time capsule, only again to get to the solid green light stage but time machine still cannot see it.
can anyone tell me what i am doing wrong? Thanks

I had the same problem this morning. Anyone have any ideas?

Help - G4 cannot see Time Capsule on Powerup

Hi,
I have one computer - an old G4, an iPhone and a PS3 connected to my Time Capsule (bought in May).
-G4 is connected by Ethernet
-PS3 and iPhone wirelessly
I usually put my G4 to sleep, and wake it, and everything's fine.
Twice now, the power has gone out, and when it comes back, the Time Capsule is green, and the PS3 and iPhone can see it. I boot the G4, and it cannot see it. The G4 also shows a date in 1969 (does that indicate other issues?).
I have tried the following both times -
Resetting the Time Capsule with the pin - does not work
Unplugging and resetting the time capsule with pin - does not work
Rebooting the computer and clearing out the PRAM - does not work
Changing the date to after 2001 on the clock, - no help
Of course, now that I've reset the time capsule, I can't configure it again and have lost the wireless connection.
Last time I eventually got it to work - but it seemed random as to how. I'm frustrated, and I would like any advice possible. I hope it's the computer and not the Time Capsule. Any thoughts? Thank you in advance.

Now I'm getting really annoyed.
Went to see the mac genius today at the Apple store. Saw it wirelessly no problem.
Saw it via Ethernet no problem. When I got him to check that there was a file on the hard drive he did it wirelessly though.
Told me Time Capsule was fine (and I believe him). Told me to take it home, create a second ethernet connection, and trash preferences for "System Configuration" if necessary. Did all that, booted, found the Time Capsule no problem.
Thought my problem was solved, but was it?
Turned off the computer, turned it on a few hours later - will not see Time Capsule, Airport will not recognize it AGAIN. Tried trashing preferences and rebooting - it doesn't work.
I'm able to connect the ethernet cable directly to the DSL modem and use PPPOE, it's fine.
I don't get it. What else can I do?

Windows Vista cannot see Time Capsule

I had a network setup via Time Capsule with iMac, Macbook Pro and PC running Vista Business. I have lost internet connectivity on the PC and Airport utility cannot see Time Capsule. The PC is connected to Time Capsule via etherenet. How can I fix this?
Message was edited by: doulos
Message was edited by: doulos

ONE PROBLEM THOUGH. I believe ONLY PROFESSIONAL versions of windows have the local policies acceptable. This means all of us using HOME editions are screwed.
Home Edition users would have to perform a Registry edit as follows:
1. Open registry editor (ref: Start > Search > Enter: regedit)
2. Browse to HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Lsa
3. Create a new DWORD value with the following properties: NAME = LmCompatibilityLevel & VALUE = 1
4. Restart your PC and try the connection again...

Parallels Win7 - Airport Utility cannot see Time Capsule

Running Win7 as virtual machine on Mac using Parallels 5.0. Mac can see fully functioning time capsule but when I switch to Win7 virtual machine, airport utility will briefly see time capsule and then it disappears completely. Same happens with using bonjour printer wizard when the HP Laserjet connected via USB to the time capusle will first appear and then disappear after 5-8 seconds. Searched help forums and have not found a solution, and welcome any help please. Internet access via time capsule on Win7 virtual machine not a problem at all.

Same issue, I found this http://forum.parallels.com/showthread.php?t=21064
Time Capsule is not a complete product.

I have two email accounts that are set up on the same iPad. I cannot seem to see, read or send email from the second account

I just set up a second email account on the same iPad but cannot seem to see, read or send email from the second account.

I'm using Windows 8 (not 8.1) and whatever the latest Thunderbird version is. They're both IMAP accounts. I was using Windows Live, but I couldn't get that to work, so I switched to TB. It works JUST fine for the one account, but not the other! They're identical except for the "handle". Both off my local ISP, set them up at the same time.

Error "cannot load request real time data targets" for new cube in BI 7.

Hi All,
WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
I am using BI 7.0 for first time and ahve the following issue:
I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets".
I checked cube type in setting in infcune is shows as Standard. When I doube clicked on error the following message showed up
You are trying to load data into a real-time InfoCube using a DTP.
This is only possible if the correct load settings have been defined for the InfoCube.
Procedure
In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
Thanks
KV

Hi Kverma,
Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
Real Time data Target can be loaded With Data; Planning not allowed &
Real Time data Target can be Planned; Data loading not allowed
You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
Regards,
Kams

Time Stamp Error: Cannot display system date and time. My VI display "YYYY-MM-DD" instead of "2014-08-02".

Hi All,
I am using Labview8.5 and Windows XP OS.
My Problem is my Labview TimeStamp cannot display current system date and time.
Please see my attachment for the screentshot.
The TimeStamp or ever Format Date/Time String display "YYYY-MM-DD" instead of "2014-08-02".
I tried other computer machine and it works. There are some computer machine has this problem.
How can I resolve this issue? Please advice. Thanks.
Best Thanks,
Jessie
Attachments:
Time Stamp error.JPG ‏68 KB

Bill,
reviewing the thread Dennis linked (thanks for that) reveals that it is the same account which opened this thread here three month later.
What bothers me is the fact, that the past thread is marked "solved" even though it obviously isn't. Or the OP is trolling us.....
Nevertheless, it seems like systematic error. Connected to specific machines.
What makes the machines where the time stamp issue occurs "unique"? If there are several, is that source really "unique"?
Most obvious reasons would be:
- Language settings (possibly the infamous "dot-comma-issue")
- Time zone settings (e.g. what happens if you switch Ulaanbaatar to Perth or maybe even some US time zone?)
- Missing hotfixes for Win and LV
- Is the system running as virtual machine vs. "native"?
Not so obvious differences:
- Specific CPU type
- Motherboard/BIOS
- LV ini settings
There are tons of other possible reasons (e.g. corrupt LV installation), but these are the ones i came up with within a couple of minutes....
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Cannot view files in Time Machine

I have my time machine backup on Time Capsule. I cannot view files while I am in the interface of time machine. Some files can be viewed with quick look such as photos and some eps or .ai files. Indesign documents will not view, address book will not view and many others. I did a series of tests and the files will restore just fine, but you cannot view them in the time machine mode. Very frustrating!! Is there a setting that I am missing?
Ben
27" imac 3.4GHz Intel Core i7, 8GB memory, ssd drive, 1TB drive, thunderbolt display second monitor

Flydesign wrote:
It would be nice to be able to go back in timemachine to a document that you had 6 months ago and ressurect it.
You can do that easily. If you can't view it via QuickLook, restore it to an alternate location, such as your desktop. See Time Machine - Frequently Asked Question #16.
I have been able to view documents in Time machine before.
Yes, some types of documents have always been viewable in TM backups. TextEdit, Pages, Numbers, Preview, and no doubt others. But some others aren't, and haven't been.
If bridge can view indesign documents, then Apple sure has the capability to add that as a feature to time machine.
Doubtful they'll do that for a 3rd-party app, but ask here: http://www.apple.com/feedback/timemachine.html
In 30+ years of design, I have only a handful of times forgot to save my work as I go.
Neither have I, but (a) it only takes once, and (b) most users don't. (Actually, most users don't even back up ).
Time Machine is not likely to change much in the forseeable future. If it doesn't meet your needs, there are lots of other backup apps around.

Datasource abcd cannot cannot be replicated ( see time stamp, longtext)

Similar Messages

Maybe you are looking for