Datasource Details Reqd..

Hi,
I have the following Transactions in R/3
Tran. Program Description
MC47 RMCBBE30 INVCO: Analysis of Reqmt Values
MC48 RMCBBW30 INVCO: Anal. of Current Stock Value
MC50 RMCBBS30 INVCO: Analysis of Dead Stock
The user used to save the output from these transactions in Flat File and report via MS-Access.
Now, They hv decided to go for BW so, I want to know the Standard Datasource/s available for these transactions, b'coz debugging the standard transaction for tables will take a lot of effort.
Or any other kind of help in obtaining the same result is welcomed.
Plz, help as it's urg.
Regards,
S Dutta

Hi Dutta,
   Plz check your other post. and dont create similar posts.
Hope you understand
Srini

Similar Messages

  • SAP BI tables / FM's to get datasource details of source system in BW system

    Hi All,
    Is it possible to trace the Datasource details of source system in BW system. For example if there a ECC Datasource 0FI_XX_XX, then is it possible to find below details in BW using some RFC FM's ot tables
    1) If there is any enhancements for the Datasource
    2)What is the name of extract sturcture and name of the enhancement.
    3) Is it possible to get code written for that Datasource enhancement
    Please let me know.
    Thank You.
    CPG

    Hi,
    Might be possible by using RFC. But you may face issues.
    Because enhancement code is based on ecc fields. those won't be compatible at bw side.
    Actually why you need to ecc details at bw side?
    All below points need to check source system side.
    1. You can check at CMOD, by using standard exits. or
    at SE38. ZXRSAU01/02/03 depend on data source type you can use program and search for your data source you may know the code if your data source was enhanced by using cmod.
    2.Data source extract structure name you can get from source system, RSA6, double click on your data source, open next screen you may see it. There is no specific name for enhancement. but all enhancement components under  RSAP0001.
    3. Yes, you can check program ZXRSAU01 - transaction data source, once you open thi program, you can search for your data source, you may see the relevant code for your data source enhancement.
    As my guess your data source is transaction data source.
    Thanks

  • Standerd BI Content DataSources and Cubes used for Cement industry

    HI,
        Kindly any one sugest the list of standerd BI Content DataSources,
       and standerd BI Content Cubes used for Cement industry
       related projects.
      Standerd BI Content Datasources and cubes for modules
      SD, Product costing , Inventry, and GL.
      Kindly Sugest.
      Regard,
      prasad.

    Hi,
    You can use normal InfoCubes/DataSource for the Cement Industry, recently I saw the design of the Cement Industry BI system, there also same InfoCubes and DataSourecs they used.
    For Cubes and DataSource details see in SDN..
    https://wiki.sdn.sap.com/wiki/display/BI/BWSDMMFIDATASOURCES
    Thanks
    Reddy

  • Generic DataSource Question

    Hi Friends,
    We have generic extractor based on the function module.
    It submits the report program and returns some value.
    This function module has parameter called S_S_IF-Maxsize = I-Maxsize.
    My counter is based on this,
    Counter GE S_S_IF-Maxsize.
    Now my question is what value of S_S_IF-Maxsize is determined by system and how?
    When I am checking in RSA3 it is based on the selection screen parameters on RSA3(By default:100).
    When I test in SE37-function module it  takes 000000 by default, I may change here to test and debug. But I wanted to know that when called by BW how it takes value of S_S_IF-Maxsize.
    If somebody knows the procedure on how to debug extractor when called by BW, please let me know.
    Please suggest.
    Thanks,
    John.

    Hi,
    A simple way to check how BW calls the extractor and what values are passed is to use RSA3 itself in the source system.
    Execute an infopackage in BW and note down the request number or you can use the request number of an existing one.
    Go to RSA3 in the source system, enter your datasource details there.  There will be a button next to the execute button at the top called "Import from BW".  Click that and enter the request number and the BW system logical name and hit enter.
    The parameters from the request will be imported.  You can view them and then debug using this data.
    Cheers
    Neeraj

  • Can't find the J2EE Application JDBC Module Datasource in Weblogic

    Hello,
    I am trying to locate the JDBC Module J2EE application Datasource details in weblogic but I cant find it.
    Can someone help me where I can find any Mbean in Weblogic which will specify all the details about the DataSource.
    You can see in the image that under deployment I have an application which has Data source(saasreporef).
    I have already discovered this target in one of my agent and I want to locate some Mbean which can give me details about this Datasource in Weblogic.

    I've solved it myself. It changed to NWDS from the Visual Administrator. It can be undepolyed using undepoly view in the NWDS.
    I can find the answer using keword 'Deploying and Running the Application from NWDS' in the help portal.

  • Difference between 0CRM_SRVCNF_COSTS and 0CRM_SERVICE_COSTS DataSources

    Hi,
    Could someone please explain the difference between the DataSources 0CRM_SRVCNF_COSTS and 0CRM_SERVICE_COSTS?
    They both seem to extract same data from Controlling in ERP.
    The DSO - 0CRM_PROH (Service Orders: Header Data) seem to get data from both these data sources, but can't see why we need these 2 datasource.
    Thanks a lot.
    Regards,
    Sri.

    According to Detailed Controlling Data   (DSO) Technical Name: 0CRM_CODA
    http://help.sap.com/saphelp_sm71_sp01/helpdata/en/4f/6b7a40cf6bcd62e10000000a155106/content.htm
    This ODS object is designed for delta update ADD (Additive Extraction via Extractor) with the DataSource Detailed Controlling Data(0CRM_SRV_COSTS) and for delta update AIE (After Images with Extractor) with the DataSource Extraction of Costs or Revenues (Order or Confirmation) (0CRM_SRVCNF_COSTS).

  • Unable to start the Weblogic Server after installing OFM SOA suite

    Hi All,
    As part of Oracle Fusion Middleware installation, i installed the SOA suite and tried to start the AdminServer configured for the SOA domain. But the server was forced shutdown due to the following error messages. (Windows 7 is my OS). Please help me to resolve this issue.
    <AdminServer2> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>>
    <> <> <1265344200947> *<BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException:*
    com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load
    LDIF for provider Authorizer from file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift..
    weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException:
    weblogic.security.spi.ProviderInitializationException: A failure occurred attempting to load LDIF for provider
    Authorizer from file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:465)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:840)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:869)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1028)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
    Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:807362 nonfatal store error> kodo.jdo.DataStoreException: ORA-00942: table or view does not exist
    {prepstmnt 2428110 *INSERT INTO BEAXACMLAP (DOMN, REALMN, TYPEN, CN, XVER, CTS, WCN, WCI, WXF, XD, XS, MTS)* VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) [params=(String) soa_domain, (String) myrealm, (String) Policies, (String) urn:bea:xacml:2.0:entitlement:resource:type@E@Fjms@G, (String) 1.0, (null) null, (null) null, (null) null, (Blob) oracle.sql.BLOB@e26d2e, (InputStream) java.io.ByteArrayInputStream@16e1ccd, (String) 3, (Timestamp) 2010-02-04 22:30:00.824] [reused=0]} [code=942, state=42000]
    FailedObject: [email protected]3c
         at org.apache.openjpa.jdbc.sql.DBDictionary.narrow(DBDictionary.java:4207)
         at org.apache.openjpa.jdbc.sql.DBDictionary.newStoreException(DBDictionary.java:4171)
         at org.apache.openjpa.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:102)
         at org.apache.openjpa.jdbc.sql.SQLExceptions.getStore(SQLExceptions.java:72)
    'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1265344200971> *<BEA-090082> <Security initializing using security realm myrealm.>*
    ####<Feb 4, 2010 10:30:00 PM CST> <Critical> <WebLogicServer> < > <AdminServer2> <main> <<WLS Kernel>> <> <> <1265344200974> <BEA-000362> <Server failed. Reason:
    There are 1 nested errors:
    weblogic.security.service.SecurityServiceRuntimeException: [Security:090399]Security Services Unavailable
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
         at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
         at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
         at weblogic.security.SecurityService.start(SecurityService.java:141)
         at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
         at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
         at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

    Dear Bhushan
    The root cause is this Error Stack Trace:
    Caused By: <openjpa-1.1.1-SNAPSHOT-r422266:807362 nonfatal store error> kodo.jdo.DataStoreException: ORA-00942: table or view does not exist
    {prepstmnt 2428110 INSERT INTO BEAXACMLAP (DOMN, REALMN, TYPEN, CN, XVER, CTS, WCN, WCI, WXF, XD, XS, MTS) VALUES (?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?) [params=(String) soa_domain, (String) myrealm, (String) Policies, (String) urn:bea:xacml:2.0:entitlement:resource:type@E@Fjms@G, (String) 1.0, (null) null, (null) null, (null) null, (Blob) oracle.sql.BLOB@e26d2e, (InputStream) java.io.ByteArrayInputStream@16e1ccd, (String) 3, (Timestamp) 2010-02-04 22:30:00.824] [reused=0]} [code=942, state=42000]
    Means, it is NOT able to find any DB Schema with the Table named like "BEAXACMLAP"...
    When we create a new domain using Config wizard, you select customize option and in one of the following screens you will see like 2 Radio buttons with options as " I do not want to change anything here" and " I want to create, change or remvoe RDMBS support". NOW use the Default setting like I do not want to change. Once I checked other radio button and ran into issues like yours. Basically if you check, YES, then you need to load another .sql file in this db schema located at: "C:\beawls1032\wlserver_10.3\server\lib\rdbms_security_store_oracle.sql". This .sql file has the above missing table "BEAXACMLAP".
    So I guess all you folks may have checked the radio button option YES, but did not run the above .sql file in that db. Under your domain root folder/config/jdbc you should see a .xml file with above datasource details. So run the above .sql file in that schema.
    I would say please start over again. Create a new domain from config wizard and use default setting for above screen that I mentiond like " I do not want to change anything here" and proceed. I am hoping that should work.
    NOTE: Running RCU utility or RCU related .sql files will NOT have above missing tables. RCU Utility will have all schemas/tables specific to SOA Components only like BPEL, WebServices, Workflows etc etc.
    Thanks
    Ravi Jegga

  • Unable to access Planning 9.3.1 from Workspace & Metadata load question

    Hi:
    I created a planning application through Classic View and was able to successfully register the app. I even updated the dimensions. I did all this using the Admin ID provided by a thrid party installation firm. They updated my security to match the Admin and when I re-log in to Workspace and click on the Planning app I just created there is an error message:
    Unable to connect to Essbase server. Check log for detail.
    I try using the Admin ID again but the same error message appear. IS anyone out there can give me some advice on what might went wrong and what should I ask them to check? They claim that all servers are up and running. I have tried to see if I can re-create another app but there is no data source available (is this because the Essbase connection problem or becuase one data source can only have one app associated with it?) Any suggestions/help will be greatly appreciated!
    Also, they did not install BPMA. I have not done 9.3.1 before but I heard I can no longer use HAL to load metadata. So without BPMA, is my other options DIM and ODI? Has anyone use any of these and which is the best tool to load metadata? Is BPMA a better option compares to the DIM/ODI?
    Thanks so much!
    Mike

    Hi,
    First I would check in shared services whether the correct access has been provisioned.
    Next try and log in directly to planning and not through workspace to eliminate any issues there. http://<planning server:8300/HyperionPlanning/
    Unable to connect to Essbase server sounds like either permissions are not correct or server details are incorrect, check the datasource details in the config utility and try and connect directly to essbase with them.
    There will not be extra datasources available if they have not been set up, you will need to create these through the config utility on the server.
    My experience of BPMA is that it is not up to being qualified as a fully stable product yet, all depends on the size of the implementation on how to you use it to whether BPMA will be useful, that leaves DIM and ODI, DIM is a third party product and is not cheap and I am not sure how much of a shelf life it will have, Oracle are pushing ODI which they now own, it is a much more stable product and has a many more rich features than BPMA though it does have a steeper learning curve and is more aimed at a technical audience.
    Hope this helps
    John
    John

  • Bc4juix:RenderValue does not display value

    After migrating to OAS 10.1.3 and JDev 10.1.3 we encoutered strange problem: in one table in TableDetail section we get empty cells. Everything works in JDev's embedded server and on one instance of cluster, but never on the other instance, and only for some rows (for some where clause it works, for some not, consistently). If I search some client using some criteria, it displays, using other it does not.
    Has anyone some clue? I compared configurations of both server and found no difference. If I use <uix:text> (commented out in example), it shows correct value, but ignores renderers, so it is not a good solution.
            <bc4juix:Table datasource="master" width="100%" formSubmitted="true">
              <uix:columnHeaderStamp>
                <uix:styledText textBinding="LABEL" />
              </uix:columnHeaderStamp>
              <jbo:AttributeIterate id="dsAttributes"  datasource="master" hideattributes="UixShowHide">
                <bc4juix:RenderValue datasource="master" dataitem="<%=dsAttributes.getName()%>" />
              </jbo:AttributeIterate>
              <bc4juix:TableDetail>
                <uix:rawText text="<center><br>" />
                <bc4juix:Table datasource="detail" proxied="true" width="800">
                  <jbo:AttributeIterate id="dsAttributesIn"  datasource="detail" hideattributes="UixShowHide">
                    <uix:column>
                      <uix:columnFormat bandingShade="light" />
                      <uix:columnHeader>
                        <uix:text text="<%=dsAttributesIn.getUIHelper().getLabel(CmIfaceModule.useApplicationModule()
    .getSession().getLocaleContext())%>" />
                      </uix:columnHeader>
                      <bc4juix:RenderValue datasource="detail" dataitem="<%=dsAttributesIn.getName()+'a'%>" />
                      <%--uix:text textBinding="<%=dsAttributesIn.getName()%>" /--%>
                    </uix:column>
                  </jbo:AttributeIterate>
                </bc4juix:Table>
                <uix:rawText text="</center>" />
              </bc4juix:TableDetail>
            </bc4juix:Table>Thanks, Viliam

    Hi Nik,
    In case of LOVs i had faced this problem , when i was using the LOV as the dymanic one .
    Ex:- select name d,id r from stud where id not in (select id from stud_joined );
    In this case , my lov was returning numeric value for already selected names and the name for the new one to be added .
    The fact behind this is ex:-
    Nandini 1
    Naina 2
    Nidhi 3
    Shijesh 4
    suppose this are students list .
    when i click lov and select a "Nandini "
    then its entry is made in the Stud_joined table.
    Now the Query will no longer has the name "Nandini " hence it will display id as 1.
    Hope , this may give a tip to find solution to your problem.
    Thanks & Regards,
    Nandini Thakur.
    Edited by: Nandini thakur on Nov 30, 2010 1:56 AM

  • Steps to create Planning Sample Application in EPM11.1.2

    Hi,
    Can anybody provide me any helpful sources for the steps to create Planning sample application in EPM11.1.2.
    I tried in OBE and couldn't get step by step process for EPM11.1.2.
    If Possible please provide a link where I can follow step by step process.
    Thank you
    Venky

    John,
    Thank you for the reply. I created the data sourceusing workspace.
    I have few questions while creating the application.
    1. Do I need to create a blank application or follow the steps
    2. Folow the steps means with out selecting blank application click next and define all new dimensions that are there in .ads file
    scenario
    year
    period
    Entity
    Account
    Version
    Segments
    Currency
    with these create the application. Then I validated and got 4 errors. I am not able to deploy it.
    While creating the application it never asked me datasource details.
    Where I shoud provide the datasource details?
    Thank you
    vijay

  • Doubt regarding database access

    Can we configure a datasource in two different domains with same name and URL each targetting to the same database instance? Is it possible?

    Yes,
    You can configure a Datasource with same DataSourceName and Same Database URL/Username/password (Means Same Database) for two different Domains.
    As well as you can manage these DataSource Details using WLST as a Centralized control util as well: http://middlewaremagic.com/weblogic/?p=4956
    Thanks
    Jay SenSharma
    http://middlewaremagic.com/weblogic/?p=4751  (Middleware Magic Is Here)

  • Transaction in Weblogic 5.1 Server

              Hi All,
              Can any one tell me How to set XA DataSource details in weblogic.properties
              file in weblogic 5.1 server.
              Thanx
              Ramana Murthy
              

    While they aren't java-specific, if you're looking for XA/2PC details,
    these 2 are good:
    Transaction Processing: Concepts and Techniques (Morgan Kaufmann Series
    in Data Management Systems)
    by Jim Gray, Andreas Reuter
    Principles of Transaction Processing
    by Philip A. Bernstein, Eric Newcomer (Contributor)
    5.1 does not support XA or 2 phase-commit. However, it does allow
    multiple cluster members to enlist in the same transaction as long as
    all database access goes through the same JDBC connection.
    WLS 6.0 and later do support XA and 2PC.
    -- Rob
    chandrasekar wrote:
    Hi all,
    Does Weblogic 5.1 support Distributed Transactions?.Please suggest me some
    books or documentation regarding Distributed Transactions, and about the XA compliant
    resources.

  • How to import  from sql server to oracle 10g

    Hi,
    I have given some file with no extention and the client told me that
    it has two tables in it emp and dept. which he extracted from sql server.
    Now I have the file with me.
    I have a local oracle database .
    Is it poosible to load that file into the oracle 10g database.
    If possible please send me the details. If not please tell me the details reqd to do the things.
    Thanks in Advance

    Well, what format is the file in? If it is a text file you should be able to use SQL*Loader.
    Can you view the file using (for example) Wordpad?
    Or from the command line (ie in a DOS box) just say
    TYPE myfileThen post the format for a few lines here, between and (use square brackets instead of curly)
    Regards Nigel

  • Understanding the data transfer from source system to PSA

    hi experts,
    i an new to BI. i have created a transactional data source for VBAK table and replicated that to BI. Created transformations and info package for uploading the data into PSA. i just want to know the sequence of steps that the system executes when we run the infopackage. i know that it makes a rfc call to source and brings the data back to BI. i want to where that RFC call happens and what is the RFC FM name etc.,. I tried to debug the process using /h, but as you know, it is very difficult to debug the whole standard code. it is very complex. i got lost some where in the middle. if anybody has any idea / or done any research on this ,please share your findings.
    thanks

    Hi,
    Once you click on Start buton in Infopackage,
    1. BW system wil send on erequest to ECC along with DataSource details.
    2. Based on BW request ECC will respond and it will send message OK and starts extraction.
    3. Based on InfoPackage selection the Data will executes in ECC and picks the data in Packets.
    4. And ECC will send the data in teh form of Datapackets to BW (Idocs)
    5. Once the selection creatiro is over the Job will finish.
    6. You can see the data in BW
    Thanks
    Reddy

  • Deleting Application & Log Question

    We had a consultant come and do training on location. I now have 3 training applications that I need to delete. They where created by three different people and when I log in as the admin to delete them, I am receiving the following message:
    " An error occurred while processing this page. Check the log for details. "
    * Which log is it referring too? I cannot find a log in planning that has details to this.
    * Could I be having issues because the admin account is not the creator of this application?
    * One of the applications does not have an essbase cube, what do I do with it?
    Any and all information would be greatly appreciated.
    Lace

    Hi,
    The error logging in planning has never been the best, especially if you are using Tomcat.
    If you run planning server in the foreground from the start menu and not as a server you get receive a lot more information (that is if you are on windows)
    If you check the datasource details for the applications created you should be able to see the user account they were created with.
    You also find out find out the sql repository tables which user is the application owner (HSP_USERS or HSP_OBJECT usually with id 50001)
    Are you saying one of the planning applications does not have a cube or an essbase application, it is alright if it does not have any cubes a create might not have been run. If there is no essbase application you can always create one with the correct name so when you run the delete application it runs through without any problems.
    Hope this helps
    John

Maybe you are looking for