Datasource for document master data available?

Hi experts,
I've failed to find extractor for document master data (table DRAW etc.) in R/3 business content. Has anyone found such or do I need to create it all by myself?
I'm on R/3 4.6C and BW3.5
Regards,
Dieter

Hi Dieter,
There is no standard data source on the table DRAW. You would have to create a custom datasource.
Bye
Dinesh

Similar Messages

Standard datasource for Invoice master data

Hi ,
Can anybody please tell me , Is there any standard datasource for Invoice masterdata.
Right now in my company there are using 0FI_AP_4 datasource as an Invoice masterdata.
This Invoice masterdata is getting data from 0FI_AP_4 datasource.
But I have a requirement like I need to enhance this 0FI_AP_4 with other tables (PAYR,REUGH).
Is there any simple way to follow.Please help me.
Thanks in advance.
Pints will be rewarded.
Vamsi.

Resolved

Export and import change document for user master data

Dear Gurus,
I have two queries on change document for user master data:
1. Are there any approaches to export and import change document for user master data?
We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
2. Change document for Role change in QAS
When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
Could you advise this is by SAP design or are there any approaches to record this transported role change in the role change document in QAS?
Thanks
YBY

1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius

How to use LSMW on CRM for bulk master data creation?

Hello Experts,
I need your help to able to use LSMW on CRM for bulk master data creation. Below is described my detailed requirement; -
We have CRM 2007 integrated with SAP ISU (ECC6.0). As per business process all Business Master Data (BP details, Business Agreement details etc) and Technical Master Data (Connection Object, PoD etc.) is created in CRM and then it is replicated in ISU. We are going to start Assembly Test soon. Now we need to have all master data in place. Tool we want to use is LSMW.
Now can you help me right from scratch on how to use LSMW for bulk master data creation in CRM?
Please give me documents / links etc that is relevant.
Regards,
Rohit

Hi,
I have looked into your query.
These are some information which might be useful to you.
What is LSMW?
Legacy System Migration Workbench or LSMW is SAP standard program that can be used to easily load / change master data or transactions in SAP without any programming at all. It can be used to upload data at cutover, such as: open orders, contracts, materials, vendors, stock on hand. It can also be used in a production system to make changes to existing data. Very limited authorization checks are available on the transaction, so the use of it must be very well controlled.
One input file can be used to create all the views of the material master. For all the material types. Even if different views and fields are used for the different materials.
Steps to take
1. Create text file with data to be loaded
2. Set up and run LSMW
The following link will provide good information on LSMW Idoc method:
[http://help.sap.com/saphelp_nw04/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm]
I hope this helps.
Regards,
Venkat

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

Data Sources for the Master data of FI-CO,MM and SD from R3

Hi Gurus ,
Could you please tell me what are the main datasources of FI-CO,MM and SD needed from R/3 for the master data to be loaded in new implementation of BI .
Could you please guide me step by step .
thanks in advance ,
Pratham

Hi
It varies from Client and project. But the Most common SD & MM are from LO **** pit.
help.sap.com is the best source for this
Hope it helps

Message Type for Material Master Data Changes

Hi all
I'm managing Message Types for Material Master Data extraction from R\3 system to BW system, in order to load on BW only the changes done to some fields of MARA table that are delta relevant.
Now from R/3 BD50 Transaction I can see that there is a message type that refer to changes done on MARA fields: RS0044.
I would like to replace this message type with another one (RS0020) in order to align different systems.
Now changes to material master data in R/3 system are recorder with both message types but only those with RS0044 message type are processed and loaded into BW system.
So I would like to know:
1. How is the message type related to the DataSource 0material?
2. is it possible to replace a message type for BW?
3. if yes, how can I do it?
Thanks in advance.
Elisa
mail: [email protected]

Hi Oscar!
At the moment I'm using Delta queue of 0MATERIAL. I know that in the queue there are all the new and changed records.
But I would like to be able not to load all the changed records, but only those that refer to some fields of MARA table.
E.g. if the gross weight of a material is modified I don't want to load this change on BW with Delta loading .
I've seen that from R/3 Transaction BD52 you can set only delta relevant fields referred to a specific message type and to delete the other fields.
As I'm able to do this directly in the Development system and Test System, I haven't got the authorization of doing it in the Production system.
That's why I need to include this setting in a CR and then ask to transport it from Test to Production system.
But message types referred to MARA field changes are different between the two systems.
And it seems they are automatically created.
Is it true?
Thanks
Elisa

New SAP Tools for faster Master Data Upload?

Hi All!
I am interested in getting some detailed information on different tools that are used for faster master data upload. Please let me know about the tools apart from LSMW, BAPI, eCATT and BDC.
We basically want to know the following things:
1.Which are the tools available for this master data upload?
for eg. SAP MDM, Info Shuttle, other available new age tools etc........
2. Their performance / feature comparions?
Please provide performance / feature comparison for different new age tools in detail.
Thanking you in advance.
Regards,

Hi Amar,
regarding SAP MDM you can read advantages and characteristics here: http://www.sap.com/platform/netweaver/components/mdm/index.epx
Hope this help you,
Vito

Standard DataSource For Excise Related Data

Hi,
Please tell me are there available any standard DataSources for Excise Related Data like Excise Invoice Header data (Table j_1iexchdr), Excise Invoice Item details (Table j_1iexcdtl), Excise Groups (Table j_1iexgrps), Excise Part II details (Table J_1IPART2) etc.
If those are available in ECC 6.0, then please provide the information or for this I need to develop generic datasource?
Regards,
Pradip Nikam

Hi,
There is no Standard DS for Excise.
I created the Generic Dss on those tables with delta enabled in my last project. And they are running successfully.
I created 2 DSs on the same table , one with delta enabled on Created date and another one with delta enabled on Changed date ( Wherever this field is there in the base table). And used Lower limit as 1 as safty delta so that I was able to do delta loads multiple times in a day.
Regards,
Anil Kumar Sharma .P

For uploading master data

hi
for uploading master data (ex: customerd data) into sap, which methods we prefer
(call transaction/ session/ LSMW) . why?

depends on how much data you want to upload..
LSMW itself will give you multiple options to load data.
if there is a huge number of records that you want to upload, do not go for a call transaction method, rather use sessions method if you want to use BDCs. explore in LSMW that which options are available for customer data while uploading it.

Delta for cubes & master data

Bonjour,
I am a bit confused about some concepts of BW. Hope to get clarified here in good ole SDN.
1. Infocube is said to be ADD only. Yet, its data deletable eg. by request. How do I interpret this? Is it deletable only by requests? How about selectively as detail as single records? How about field level deletion (instead of a whole record)?
2. Is a 'new' image (rec mode "N") = 'after' image (rec mode " ")?
3. How is Repair Request compared to Pseudo Delta? Are they both only and must selectively delete by month / time char only? Can either be deleted by single records?
4. Master data is said to be usually overwritten. How is it so? What Delta type(s) are we talking about by this? How is Master data aggregated? Can it be? What does serialization and duplicate master data processing mean? How can master data prevent duplicates?
What's the usual and possible practices to manage delta for Master data attr,txt,hier?
Awaiting your reply.
best regards,
Pascal Gabin

1. Infocube is said to be add only because it is different from ODS or master data where you can 'merge or overwrite' data. When 2 records are loaded into an Infocube, if they are different in any one field, they will be stored as 2 seperate records (in the fact table of the cube). Whereas if 2 records are loaded into an ODS, and the records are similar in terms of the key of the ODS, only 1 record will be created in the ODS with the second records details overwriting the first if there is a clash.
From a cube you can delete data either selectively by specifying ranges or delete an entire request. You cannot do field level deletions.
2. No they are different. Let us say there is a record with 2 fields Customer and Amount being loaded into an ODS. First record loaded is (Pascal, 10.00). Then there will be a New-image record (Pascal, 10.00,N). After this a second record (Pascal, 15.00) is loaded. After this there will be 3 records.
Pascal, 10.00, New Image
Pascal, -10.00, Before Image
Pascal, 15.00, After Image.
All 3 add to 15.00.
3. Not able to understand your question. Deletion of all requests are I think the same. Selective deletion can be done only for a Infocube not for an ODS. See answer 1.
4. Master data usually changes very little. For eg, a customer 100013 is always 100013. Once in a while his phone number might change. When it does, it is picked up by the delta and the existing record in BW is overwritten. There is only one type of delta for master data. Not sure of what is the exact name. Master data is aggregated by specifying the key to the master data table.
The best practice is to maintain delta only for large master data objects (Customers, Materials etc). For all of these SAP has provided delta-enabled datasources which can be used. For the rest, full-uploads suffice.

DTP error: Lock NOT set for: Loading master data attributes

Hi,
I have a custom datasource from ECC which loads into 0CUST_SALES. I'm using DTP & transformation which has worked for loading data in the past for this infoobject. The infopackage loads with a green status but when i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes". I've tried reactivating everything but it didn't help. Does anyone know what this error means? We're on SP7. Thanks in advance!

Hello Catherine
I have had this problem in the past (3.0B) --> the reason is that our system was too slow and could not crunch the data fast enough, therefore packets where loacking each other.
The fix: load the data into the PSA only, and then send it in background from the PSA to the info object. By doing this, only a background process will run, therefore locks cannot happen.
Fix#2: by a faster server (by faster, I mean more CPU power)
Now, maybe you have another issue with NW2004s, this was only my 2 cents quick thought
Good luck!
Ioan

Turning off the text for a master data object

What happens if we turn off the texts for a master data object? (In RSA1, under info objects - double click on info object and go to Master data/texts tab and untick the 'with texts' box). Are there any risks in doing this? Has anyone performed this and run into any issues? Thanks

Hi,
There are no issues in turning off the texts, but if its an object that requires description in the report, say material, plant etc, then you won't have that available as the texts are disabled and not loaded.
Cheers,
Kedar

Screen Layout for Asset Master Data

Hi all,
we are using SAP ECC 6.0 with a base component 700 Level 15 and the Logistics and Accounting component 600 Level 12.
I hope you can help me with the following tasks. It should be said that I am not an expert FI-AA, so you must bear with me.
It is desired, that the Screen Layout for asset master data, should have an additional field "customer order" as a required field.
So I go to the Customizing
--> Financial Accounting --> Asset Accounting > Master Data> Screen Layout--> Define Screen Layout for Asset Master Data --> Define Screen Layout for Asset Master Data
--> and then into the third level of navigation in the u201Cfield group rulesu201D (rule for R & D development costs and then logical field group time-dependent data)
So there I should be deposited the "customer order" as a required field.
But:
1. The "customer order" is not available in any field group. How is it possible that I add the u201Ccustomer orderu201D to a field group?
2. I am not able to add any field, in the above transaction?
I am very grateful for any help.
greetings

Dear all,
I want to come back to my problem listed above.
In the APC Values Posting (Transaction ASKP) the costs have been assigned to a WBS element. Now, it should not be assigned to a WBS element, but to a customer order.
For that I created in the asset master a new customer's own field "Customer Order".
For this I have implemented the customer enhancement AIST0002 (Customer fields in asset master).
The new field "Customer Order" is now available in the asset master as desired.
So far so good.
Now, the new field "Customer Order" must be specified and activate as an Account Assignment Object.
Is this possible and how can I add my new field to an Account Assignment Object?
Thanks in advance for any help.
greetings
Martin Buthmann

What are the tables used for ACR & Master data daemon job?

Hi Experts,
What are the tables used in the backend for ACR & Master data daemon jobs. I would like to see the details of CHANGERUNMONI or ACR/Hierarchy Change run.
Kr,
Praveen

Hi Praveen,
Have you tried these tables BALHDR, BALDAT and BALOBJT for checking master date daemon delta status. It may not give you complete details. but definitely helps.. If you find any more details please do let me know..
Thanks,
Bharath

Datasource for document master data available?

Similar Messages

Maybe you are looking for