DataSource for FBL5N - Customer Line Items

Hello,
Could someone please let me know if there is any Business Content DataSource existing for fetching data from FI transaction - FBL5N for Customer Line Items?
Many thanks.
Regards,
Sri.

Hi Selva, Raghavendra,
Thanks for the info.
I see that there are 2 datasources:
0FI_AR_3: Customers: Line Items
0FI_AR_4: Customers: Line Items with Delta Extraction
What is the difference between these two DS (apart from '_4' says with Delta Extraction)? Does '_3' not bring Deltas?
Is the following flow correct? :
0FI_AR_4 (DataSource) -> 0FI_AR_4 (InfoSource) -> 0FIAR_O03 (DSO - Accounts Receivable: Line Items) -> 0FIAR_C03 (InfoCube - Accounts Receivable: Line Items)
Many thanks.
Regards,
Sri.

Similar Messages

  • Profit Center for Vendor/Customer line item in F-02

    hi all,
    We have implemented SAP ECC 6.
    At the time of vendor line item posting, there is no input field for profit center.
    Can anyone please tell the way out for Profit Center field pop up in case of t-code like f-02 for vendors & customers
    Abhishek

    Please note the following:
    - On FBL5N and alike customer/vendor line item reports you won't find
    the field profit center filled; hence you can't directly input it during document entry (as pre-mentioned)
    and the profit center for customer/vendor gets inherited (as of document splitting functionality) from the document other line item(s) (according to the defined document splitting rules...)
    - Yet you can use the below reports (with New G/L.) to get the customer/vendor line items wise reporting over a profit center (i.e. unlike FBL5N & showing the inherited customer/vendor profit center in the G/L. view)
    S_AC0_52000887 - Line Items->Open Items->Receivables: Profit Center
    S_AC0_52000888- Line Items->Open Items->Payables: Profit Center
    In both reports you can use:
    "Custom Selections" -Dynamic Selections Icon- enabling you to filter the output according to
    a. Customer line items specific data entered within the posted document(s)
    b. General ledger items of the G/L. view of the posted document(s)
    & the "Output type" includes like most of the New G/L. Reports:
    - Graphical report output
    - Classical drill-down report
    - Object list (more than one lead column)

  • T code for vendor,customer line item display

    we are using ecc 6.
      I would like to know the wheter any tcode is available in ECC6 for cust and vendor line item display.
    NEW TCODE for FBL3N is FAGLL03. Like that any new new tcode is availbale for FBL1N & FBL5N?
    Please clarify.
    Thanks
    Rajesh

    Dear Rajesh,
    There are not direct 'replacement' as the FAGLL03->FBL3N for FBL1N and FBL5N.
    So the FBL1N and FBL5N can be used further without any problem.
    As stated before, only the G/L are has directly changed.
    But in the relation to the New G/L, there are two new 'Recherche' tools for the vendor and customer area in relation to the 'Segment' and 'Profit Center'.
    You can find them in the FGI0 transaction.
    They are called:
    0SAPRECIEV01
    0SAPRECIEV02
    0SAPPAYABL01
    0SAPPAYABL02
    Maybe they can also help you further.
    Best regards,
    Christoph

  • FBL5N --customer line item report

    Dear all,
    our clients want to see "customer name" in FBL5N report, vendor name in FBL1N by each line items when selecting  all customers or vendors .
    I wonder how you guys could make it possible to meet this requests?
    Sincerely,
    J.

    Dear Jimmy,
                                                                                    the Customer Name may be displayed in the Header Data via the following              
    Menu path in FBL5N : Settings > Display Variant > Current Header Rows.               
    The attached OSS note 181592 and 181697 explain more in detail how to                
    set up the headers.                                                                               
    Should you require the same to be on line item basis, I am sorry to                  
    tell you that the same is not possible as per the standard, as                       
    customer name is not saved on document line item tables. It can only                 
    be visible in the header lines of FBL5N as explained.                                
    For the line items, you can only see values of tables: BSIK, BSEG, BKPF,             
    BSED, PAYR, BSEGC and BSEC (the last one is only for one time vendors).   
    The table KNA1 is not a permitted table.
    I hope this helps.
    Mauri

  • Datasource for new GL line items

    Hi Experts,
    From referring to previous forums, its been clear that to use FAGLFLEXA for line items, i have to create a generic datasource. Please confirm forllowing :
    1) Is it still the case or does SAP suggests to use any other delivered datasource
    2)If a generic datasource needs to be created, which is the best option to use from table/view, function module or infoset as FAGLFLEXA won't satisfy all the fields. Business need few purchasing table fields to be added.
    3) Above requirement must support delta
    Please advise as this is quite urgent.  Points will be awarded upon helpful suggestions
    Regards
    Shanthi

    For GL line item details, you surely can use SAP business Content datasource 0FI_GL_4 and the datatarget is 0FIGL_O02. The datasource is build on table BKPF and BSEG in R/3 which stores the line itme level data.
    Also this is delta compatible.
    For details, you may want to refer to link below:
    http://help.sap.com/saphelp_nw04/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
    Regards
    Pankaj
    ********Assign pts if helpful

  • Reg fbl5n customer line item display

    I n FBL5n report wbs element field value is not displaying
    When posting the invoice through FB70
    wbs element field name PROJK
    I have searched in SDN but any thread not related to this one
    Suggest me how to display the value
    Regards
    Suri
    Edited by: mannem suresh9 on Dec 23, 2011 7:06 PM

    Hi
    If you don't have available this field, you can enhance FBL5N list. Please, see the article [Offsetting Account Description in FBL3N & FAGLL03 u2013 GL Line Item Display Reports|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8011026d-eb5d-2e10-b9bb-d0601949b86a?QuickLink=index&overridelayout=true] by Imran Mohammad Khan. K in this site.
    I hope this helps you
    Regards
    Eduardo
    PD: See also [Addition of Fields in Line Item Display Report Output for TCode FBL1N/FBL5N|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d6c489-aa3a-2e10-db88-deb9114b6854?QuickLink=index&overridelayout=true] by Swapnoneel Mukherjee.
    Edited by: E_Hinojosa on Dec 27, 2011 9:37 AM

  • FBL5N customer line item ALV report -- define exit points

    Customer wants to modifications on FBL5N std sap report. Here's what I think are the options:
    1. Modify SAP program (which I dont prefer at all to do)
    2. Copy SAP Program into Y/Z program
    3. User-exits or BAdIs.
    I am in process of doing step 2.
    I tried to find any user-exits for the requirement but there seems no user-exit. There is no std BAdI delivered for the same purpose either.
    Hence, I was wondering if I can create BAdI so as to define the exit points where I need. Can you suggest on howt to go about this procedure?

    If you copy and change the program, you have to be aware that in some of the includes, it checks the program name and calling transaction and behaves differently if it's not the normal program name or transaction. If SAP makes significant changes to the program during an upgrade, your changed program won't have these SAP changes. I don't know of any BADIs or user exits for report programs.
    Some people wiil disagree with me on this, but I really don't have a problem with making mods to the original SAP code, particulary if you can isolate them in another include and keep changes to the SAP code to a minimum. With version management and SPAU at upgrade and support pack time, you can keep track of your changes and re-apply them if needed.
    But it's easy for me to say because I've been doing this for quite a while. If you really don't want to make the changes, then you're probably better off copying and changing a Z program.
    Rob

  • Customer line items ...dispute case

    Friends,
    when i go into the customer line item report (FBL5N) and click on a record it opens up a page where we see a button for 'Dispute Case'and i went there and changed the reason for case and saved it and came back to the fbl5n customer line item screen and checked the record against which i changed the reason for case, but it didnt changed the reasion on the record but when i go into the record and try to view it in additional details it shows me the one i have made changes. not able to understand why it is not showing in the list of line items when it is showing inside the record details that it has been changed,even i did refreshed it . Our end user wants to see the changed reason code on the line items page wich is on the AR side when we change the reason for case on the dispute side.
    its kind of urgent please put some light onto it, any help would be highly appreciable...
    Thanks
    Jay

    sounds like changing the ALE from system 1 to the other system.
    However I doubt it will be that easy.
    I believe that could should contact SAP SLO to work out the best route for data migration.

  • RSBBS Jump: AR Line Item Query to R3 Customer Line Item Display

    I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
    The query that the jump is to be performed from an Aging query.
    The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
    Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
    I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
    I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
    Has anyone else out there tried this?
    If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
    All ideas appreciated . . .

    I'm still hoping that someone can help with this issue.
    Here's a repeat of the original question:
    I am attempting to create a 'Jump Target' from the 0FIAR_C03 AR Line Item Infocube to the R3 FBL5N Customer Line Item Display transaction.
    The query that the jump is to be performed from an Aging query.
    The user will be running this query for all transactions posted up to and including the end of the previous calendar month. The posting date is provided by the user when submitting the query (via variable 0P_KEYD2). The aging report works just fine.
    Where I'm having the problem is when the user wishes to jump to the R3 transaction FBL5N to display the Customer Line Items. The user wants the 'Line Item Selection' in R3 to inlcude 'Open Items' (this button should be selected -- it is the default setting) where 'Open at Key Date' is to be derived from the query result in the Excel workbook.
    I have created the RSBBS Sender/Receiver Assignment so that it goes and retrieves the line items from R3 for the correct customer. However, I have not been able to figure out how to populate the 'Open at Key Date' with the end Posting Date (OPSTNG_DATE) from the query.
    I've tried every combination I can imagine in the 'Assignment Details' section in RSBBS, but so far I have not been able to make it work.
    Has anyone else out there tried this?
    If you have, were you able to populate the 'Open at Key Date' (ALLGSTID) field in the R3 FBL5N transaction? If you were able to do this, how did you do it?
    All ideas appreciated . . .

  • Customer line item report with GL account display

    Hi
    Please guide some customer reports for the following
    Client need a Customer Line item reports with Customer number and repective gl account for each line items.
    for ex: Product A/c xxxxxx
              To Sales A/c xxxxxx(recon A/c)
    Thanks in advance

    Hi
    1.FBL5N -  Customer Line item Display (Customer Line item reports with Customer number )
    2.FBL1N - Vendor Line item Display
    3.FBL3N - General Ledger Line item Display
    The sales entry will be
         DR  Customer - to view this entry FBL5N
               CR Sales - to view this entry FBL3N
    Hope this will be usefull

  • Customer line item display

    Hi All,
    I have a Credit Invoice which is open on VF03, but when I went to FBL5N customer line item display, I gave customer num and checked all open items, it is not there. Can someone please help me why it is not showing up in FBL5N.
    Thanks,
    Veni.

    Hi All,
    I have a Credit Invoice which is open on VF03, but when I went to FBL5N customer line item display, I gave customer num and checked all open items, it is not there. Can someone please help me why it is not showing up in FBL5N.
    Thanks,
    Veni.

  • FDM_COLL01 (Cust Acct-Receivables) Open Bal FBL5N (Cust Line Item)

    I have a customer with open balance from FDM_COLL01 (Customer Acct - Process Receivables) 13,533.33. But FBL5N (Customer Line Item Display) has open item of 81,200. The AR data is sent to FSCM daily on batch jobs. What factors can contribute to the difference?
    Thanks in advance.
    Stephen

    I would check the line items.
    There will be missing line items, I would check them.
    Have you got any noted items, special GL items, items that were cleared in the future?
    Also have you activated Head Office display as per Enhancement Package 4 - that could be a reason as well.

  • FBL5N - in Rule set - It is a Display customer line items

    Dear All,
    We observed that FBL5N - Display customer line items in Standard SoD rule set under function AR07  addressing a risk of S022.
    Unless there are t-codes of FD03 or FB02 this t-code does not allow to change the payment terms of the customer.
    We are having a challenge from the client that FBL5N is a display t-code and why it is there in rule set.
    Has anybody came across this scenario? If yes, what is the underlying risk for this FBL5N independently.
    Is there any SAP Note for this t-code like ME23N from SAP.
    Thanks and Best Regards,
    Srihari.K

    Hi Christian,
    We checked the authorization objects as well enabled in GRC rule set as below:
    F_BKPF_BUK - Docume t Authorization document for company codes - 01 or 02 - Enable.
    Inspite of this access, FBL5N cannot be used to change the document for payment terms and assignments without FB02 t-code
    assignment in the role.
    Independently FBL5N cannot be used for any change or create activity except Display customer line items.
    Please advise
    Thanks and Best Regards,
    Srihari.K

  • Customer line items ledger view in ECC 6.0 other than FBL5N

    HI
    Is there any other T code for customer line items ledger view in ECC 6.0 other than FBL5N
    thanks

    Hi Jagadeesh,
    There are some bunch of reports avaialble in SAP for customer Lines item display,
    S_ALR_87012168 - Due Date Analysis for Open Items
    S_ALR_87012197 - List of Customer Line Items
    S_ALR_87012173 - List of Customer Open Items for Printing
    S_ALR_87012174 - List of Customer Open Items
    S_ALR_87012175 - Open Items - Customer Due Date Forecast
    S_ALR_87012176 - Customer Evaluation with OI Sorted List
    S_ALR_87012177 - Customer Payment History
    S_ALR_87012178 - Customer Open Item Analysis by Balance of Overdue Items
    S_ALR_87012198 - List of Cleared Customer Items for Printing
    S_ALR_87012199 - List Of Down Payments Open On Key Date - Customers
    Please check the above mentioned reports
    Hope its useful to you
    Regards
    Saravanan.A

  • Open field for customer line item

    Hi Guru
      I have some problem about open field for customer line item  post with posting key 09 and special GL , I open field at posting key 09 but the field still hidden  . How I can open field for used . Thank you

    Dear,
    Use transaction FBL5N and select Special G/L Transactions only and execute.....here bring posting key and filter the posting with 09.
    REgards,
    Chintan Joshi

Maybe you are looking for