Datasource for material wise production data

Hi Gurus,
I need to extract daily production data from ECC material & plantwise. So which datasource I need to use for it? Its for a steel industry.
Of the below ones which datasources can I use? & which DSO & Cube can I consider?\
2LIS_04_P_COMP
2LIS_04_P_MATNR
2LIS_04_P_ARBPL
Rgds,
Vandana.

Hi Did you try these below DSs.
0MAT_PLANT_ATTR
0MAT_ST_LOC_ATTR
Have you had any issues in trying these ds?
Regards,
Rambabu

Similar Messages

  • Tables for fields for machine wise production data

    PP gurus,
    Plz let me know abt the tables for fields
    machine code
    quantity poduced
    quantity rework
    quantity rejected
    no of settings
    hours available
    hours produced
    time per setup(in minutes)
    segemnt
    Plz let me know all dse ASAP.
    regards,

    Sudha,
    AFRC                           Incorrect cost calculations from confirmat
    AFRD                           Default values for collective confirmation
    AFRH                           Header information for confirmation pool
    AFRP0                          Table of planned changes for confirmation
    AFRP1                          Table of planned changes to conf.: Automat
    AFRP2                          Table of planned changes for confirmation:
    AFRP3                          Table of planned changes for confirmation:
    AFRP4                          Table of planned changes to confirmatn: Da
    AFRU                           Order Confirmations
    AFRUHR                         Order Confirmations for HR
    AFRV                           Confirmation pool
    AFRV_DEL                       Backup Copy for Confirmation Pool
    Regards,
    Prasobh

  • Please maintain  the master data for material during product cost collector

    hi
    i get a error
    please maintain  the master data for material during product cost collector
    please guide me
    regards
    leo

    Hi Leo,
    Can you elaborate your issue, like when did you get the error exactly?
    If it is the error you got while creating Product Cost Collector, then this is not the right Forum to post.
    Please post your question in the 'ERP Manufacturing (PP)' forum
    Regards,
    Manimaran M

  • How to implement the search help exit to MM01 for Material by product hiera

    Hi,
    How to implement the search help exit to MM01 T-code for Material by product hierarchy,
    but system default it gives the data from MVKE table, my client wants from MARA table,
    i created the one Function Module, write this code in that FM.
    IF CALLCONTROL-STEP EQ 'DISP'.
    REFRESH RECORD_TAB.
    SELECT * FROM MARA INTO TABLE RECORD_TAB
    WHERE PRDHA = 
    ENDIF.
    I Face the problem what variable i have to pass in WHERE CONDITION, FROM THE MM01 T-code.
    is't require to IMPORT variable from MM01 program, what is that import variable, please give me the solution.
    thanks to all.

    Hi there..
    check my web blog on search help exit...
    [Search help exit code|https://wiki.sdn.sap.com/wiki/x/du0]

  • SAP Cloud For Customer : Code List Mapping For Material or Product

    Hi Experts,
    I wnat some information about the SAP cloud code list mapping.
    If i want to replicate Material / Product from SAP ECC / SAP CRM to SAP cloud for customer then any code list mapping entry we need to maintain in cloud side?
    Or
    Any Code list mapping for Material or Product in Cloud?
    If yes anyone have list with SAP ECC / SAP CRM table details?
    Many Thanks
    Mithun

    Hi Mithun,
    Code list data type is available in SAP Cloud. As of my knowledge I trying to find is code list mapping is available or not.
    Yes we can replicate exactly the same values in SAP Cloud that we see in the SAP ECC / SAP CRM. For this, We need to create custom 'Code list' for the required one you want and assign that code list data type name which you created in the previous step to the required element in the BO.
    For creating the code list data type: Go the Solution Explorer, Right Click on the Solution name, Click on 'Add' and Click on "New Item', then Add new item window will open with Installed templates, you will see the list of templates select the code list data type. Give the name as per your requirement starting with Z, max length is 27 only. click next, in 2/3 step, here you can add the list of values you want, add description to them. after clicking on the finish. activate the solution. Go to the BO and for the required element add the name you provided in creating the Custom code list ( ZXxxxxCode ) . Save and activate the BO as well as the solution then update the metadata in the designer part and in date model also, In data model, bind the required root element which is on the left pane to the required BO element which are in the right pane. Click Save and activate here also after the changes are made. finally activate the solution. In the solution explorer Right click on the OIF ui component and click on preview, it will open in the browser, here you will find the custom list you created, for the required one which you added code list date type name for the element in the BO.
    Mithun.. Sorry if I"m confusing you more on this. let me know is this solution enough for the requirement you are searching.
    Best Regards
    Bandhav

  • How to create  a datasource for 0COSTCENTER to load data in csv file  in BI

    how to create  a datasource for 0COSTCENTER to load data in csv file  in BI 7.0 system
    can you emil me the picture of the step about how to  loaded individual values of the hierarchy using CSV file
    thank you very much
    my emil is <Removed>
    allen

    Step 1: Load Required Master Data for 0CostCenter in to BI system
    Step 2: Enable Characteristics to support Hierarchy for this 0Cost Center and specify the External Characteristic(In the Lowest Node or Last Node) while creation of this Characteristic InfoObject
    Step 3: On Last Node of Hierarchy Structure in the InfoObject, Right Click and then Create Hierarchy MANUALLY by Inserting the Master Data Value as BI dosent Support the Hierarchy load directly you need to do it manually....
    Step 4: Mapping
    Create Text Node thats the first node (Root Node)
    Insert Characteristic Nodes
    Insert the Last Node of the Hierarchy
    Then you need to create a Open hub Destination for extracting data into the .csv file...
    Step1 : Create the Open Hub Destination give the Master Data table name and enter all the fields required....and create the transformations for this Open Hub connecting to the External file or excel file source...then give the location on to your local disk or path of the server in the first tab and request for the data...It should work alright let me know if you need anything else...
    Thanks,
    Sandhya

  • Standard Datasource for Purchase Order master data

    Hi Experts,
    Is there any Standard datasource for extracting attribute information for Purchase Orders. Some master data datasources.
    Iam  particularly after the name of the person who released the PO.
    Thanks,
    DV

    Hi,
    These are standard Master Data Datasources
        0CRIT_MAIN_TEXT                   Key for Appraisal Criterion
        0CRIT_SUB_TEXT                    Subcriterion
        0CRIT_TYP_TEXT                    Scoring Method
        0DCINDIC_TEXT                     Debit/Credit Indicator
        0DISMM_ATTR                       MRP Type
        0DISMM_TEXT                       MRP Type
        0INDSPECSTK_TEXT                  Text Indicator Special Stock Valuation
        0INFO_REC_ATTR                    Number of Purchasing Info Record
        0INFO_REC_TEXT                    Number of Purchasing Info Record
        0INFO_TYPE_TEXT                   Purchasing info record category
        0MATL_CAT_TEXT                    Material Type
        0MATL_GROUP_TEXT                  Material Group
        0MAT_TYPE_VA_ATTR                 Control of Quantity/Value Update
        0MAT_VEND_ATTR                    Material Number Compounded to vendor
        0MRP_CONTRL_TEXT                  MRP controller
        0PRICE_CTRL_TEXT                  Price control indicator
        0PRICE_TYPE_TEXT                  Price type
        0PURCH_ORG_TEXT                   Purchasing Organization
        0PUR_GROUP_TEXT                   Purchasing Group
        0PUR_REASON_TEXT                  Reason for ordering
        0SERVICE_ATTR                     Service Master (Attributes)
        0SERVICE_TEXT                     Service number
        0STOCKCAT_TEXT                    Stock Category
        0STOCKTYPE_TEXT                   Text for Stock Characteristic
        0STOR_LOC_TEXT                    Storage Location
        0STRGE_SECT_TEXT                  Storage section for stock removal, placemen
        0STRGE_TYPE_TEXT                  Storage Type
        0STRGE_UNIT_TEXT                  Storage unit type
        0VENDOR_ATTR                      Vendor Number
        0VENDOR_LKLS_HIER                 Vendor number
        0VENDOR_TEXT                      Vendor Number
        0WHSE_NUM_TEXT                    Warehouse number / warehouse complex
        0WM_MVT_TYP_TEXT                  Movement type for Warehouse Management
    Regards,
    Marasa.

  • Datasource for material reservation data from SAP R/3 (RESB & RKPF table)

    Hi,
    How can i take material reservation data stored in SAP R/3 RESB and RKPF table. I can create generic data source and full upload of data is possible but how to manage daily delta. None of these table having change date to extract daily changed record to BI. Please suggest.
    Please inform if any business content data source available for Reservation data?
    Regards,
    Manish

    Hi,
    Many times we face such situation, that we need to create a generic data source and there is no field to define delta.
    In such situations you can go for psuedo delta.
    Ask the client that at any point of time till which date will the data be changed.
    Eg. the client may say that at max we will change last three months data.
    In that case everytime you can do a full update and load only data of last three months.
    Instead of date you can consider any field as per your requirement.
    Regards,
    Mansi

  • Default GL Account for Material/Service Product type

    Is it possible to default a particular GL account for Product types Material/Service.
    Thanks
    Sanjeev

    Hi ,
    Can we assign a GL account for a product category without specifing any account assignment category.
    That means i want to assign the same GL for all the Account assignment category.
    please provide the answer.
    Regards,
    Kumar.

  • Query for material wise pricing

    i want to extract price for sales org/distribution channel/ Division/material. which tables can i used .

    Table
    Field combination
    A274
    - Sales org./Distr. chl/Division/Material/Item
    A273
    - Sales org./Distr. chl/Division/Material/Customer/Item
    Regards
    JP

  • Need detailed report for Material wise cost components??

    HI
    I can only view one material at a time for the ck80_99 cost component report. Is there a way to view more materials from the same report. we have a option to give multiple material numbers but its not executing the report at that point, it first display all the materials with the costing variant when we further execute the reprt it is generating for only one material. Please help me on its urgent.
    If standard report is not available, can we go customized report for this?
    Thanks,

    HI Siva,
    Thanks for quick reply. Yeah, in S_ALR_87013047 i can compare only two materials. but i am looking for a report for group of materials for forecasting. Can we create acustomised report for this.
    Please let me know.
    Thanks
    vamshi

  • Error when no production BOM exists for material in production order.

    Experts,
    I have materials with production BOM's and other materials without production BOM's.
    When I create a production order, I get an error message (not blocking) that I don't have production BOM.
    Can I configure my production order type in a way that a production BOM is optional?
    Many thanks!
    Jan

    Hi,
    Please cheeck with OPJB.
    SPRO-> Shop floor control->Sytem modfications-> Define sytem message attributes.
    As you can convert the meassages only defined here
    SPRO ( Production > Basic Data> BOM > General Data > Change Message Type .
    Or
    Goto SE91; press F4; select SAP Applications as PP and find all messages under it
    Regards,
    R.Brahmankar

  • T code for material production and production

    Hi,
    Could any one please tell me the *t-code* to find out monthly/ daily material wise production and consumption report in value and qty as well
    Regards / Ashok verma

    Dear Ashok Kumar,
    Check the reports,
    MCP3,MCPM - for the actual production happened for a period,you can get it daywise for any product.
    MCRP,MCP6,MCRE - Actual consumption of materials during a period for production.
    MB51 - you can get the list of 201 movement(In case if any material is issued against cost center).
    Check and revert back.
    Regards
    Mangalraj.S

  • Production date to be entered for existing materials

    Hi all,
    Is there any standard tcode/procedure for entering the Production date/SLED for the existing materials whose GR is already done.The client don't want to cancel the old GR and do a fresh entry.'
    Please do suggest me a better solution to the above

    How it is possible to enter the Date of Manufacture after the GR is done already but w/o cancelling the GR...

  • BTE for material classification

    Hi,
    im searching for a BTE which trigger modification on material classifications. I found EVENT 4004 and 4005, but they not work. I change classification with mm02 under the classification tab. Have someone an idea if there is an EVENT for this? Or exists a BOR for this?
    thx
    Ralph

    Hi Shri ,
    BTE mainly for FI transactions .
    BADIs for MM
    BADI_MATERIAL_CHECK  Enhanced checks for material master table               
    BADI_MATERIAL_OD                                                             
    BADI_MATERIAL_REF    Addition of customer-defined default data for material  
    BADI_MATMAS_ALE_CR   Change Data in MATMAS IDoc When Generating an IDoc      
    BADI_MATMAS_ALE_IN   Change Data in MATMAS IDoc Before Posting               
    BADI_MATN1           BAdI for Conversion Exit MATN1                          
    BADI_MATRIX_SORT     Sorting of Matrix Axis Population                       
    BADI_MAT_F_SPEC_SEL  BAdI for Material Special Field Selection               
    Regards
    Prabhu

Maybe you are looking for

  • How do I convert a WORD doc to pdf on my Mac

    How do I convert a WORD doc to pdf

  • PHP/mySQL Insert/Update Problems

    I hope someone can help because I can't find anything online that is helping me with this problem. I can't get the Dreamweaver controls to work when coding a PHP insert or update record page. It looks like it creates the code correctly but when I put

  • What is the different type mapping faster execution order ?

    Order is XSLT, JAVA(SAX), JAVA(DOM), Graphical(sax), and ABAP mappings ? Is there any Graphical mapping with dom parser ? Please send the faster execution order .

  • Photo import missing locations

    I keep my photos on an external USB drive. When I import photos the only options for where to put them is desktop or my pictures - not even the C drive. The backup location is even more restricted - desktop. The catalog knows that the drive is there

  • RAID for offsite backup?

    Hello! My question is not specific to Xserve, but the OSX software RAID provided by Disk Utility. I posted on the 10.6.2 installation and setup board, but was recommended that I post here instead. So here goes... I'm planning to use 2 external drives