DataSource for table VEKP/VEKO

Hi,
We have reporting requirement for "Handling Unit that shows in-stock inventory for each GL storage location". We have identified that all the relevant information is available in Shipping tables VEKP and VEKO. We have checked business content for the relevant DataSource  but didnt find any helpful information.
Can someone suggest which data sources provides the data from table VEKP/VEKO .
Appreciate  your help.
Thanks in advance.
Dev

Hi Devandra,
SAP provides the following 2 Data sources
0DF_IS_DFS_65 (VEKP) and 0DF_IS_DFS_66 (VEPO)
But these are part of an industry solution SAP Defence Forces & Public Security 6.10. Unless you have the license for this you cannot utilize these 2 Data sources.
Till then create Generic Data sources on top of these 2 tables and load it as full.  You can also create Generic Delta Data sources (but not sure whether they will work properly - u need to test them out). You may have to search for the document on how to do this on BW Expert online.
Thanks
Ravi

Similar Messages

  • Datasource for Table MSKA

    Dear Gurus,
                     Can someone help me in identifying the Datasource for the Table (MSKA) -(Sales order stock)??Am working on PP and i assume this table should be in one of the PP Datasources,but still am finding it hard to get the right DS.
    manythanks
    arun

    Hi,
    Try for 2LIS_03 datasources.
    Cheers
    Raj

  • Error while creating datasource from table MBEWH

    Hi all,
    I am facing an error message while creating datasource from table MBEWH
    "Invalid extract structure template MBEWH of DataSource "; This operation failed, because the template structure quantity fields or currency fields, for example, field LBKUM refer to a different table.
    Can anyone help me that why system is not allowing me to generate generic datasource for table MBEWH to transfer my month wise inventory data.
    thanks and regards.

    Hi Zakir,
          This was comming for classification data... when ever you want to extract some classification related data then we can't create generic datasources  directly.. for that you need  to go with CTBW  ( tcode )  and   create  one datasource...
       so, you need to check that   related table also.. for that  MBEWH table..
        ALL THE CLASSIFICATION RELATED DATASOURCES WE CAN'T CREATE DIRECTLY... JUST LIKE  AUSP table also.. liek this..
    regards
    @jay

  • DataSource for FAGLFLEXT and BSEG, or New Table in ECC6?

    need to create an extractor to have all the information of FAGLFLEXT, because we need to keep the ledger information and the split of the information. However, we need to add 13 fields contained in BSEG.
    Therefore we thought to reads the line items table FAGLFLEXA, and then enhace it throught BSEG table.
    However, since we are using ECC6 and BI7. It is not support the creation of DataSources for FAGLFLEXA throught FAGLBW03.
    Is it an option to incorporate all fields into FAGLFLEXT.
    Can we creat a new table group based on FAGLFLEXT, and then adding the coding block extensions to that table -
    how does new g/l and the new table group work in parallel? Which is the procedure to do it?
    Documentation says we can create a new table group based on FAGLFLEXT --- its the how does it work in conjuction part...for example...the new g/l handles document splitting and one other thing georg referenced last night...will the split documents go into our new table group?
    BSEG does not have the document splitter information that we need (it's incomplete data). It's missing profit centers on many items, it's missing the proper split of transactions.
    Thanks for your comments.

    Here is more information about this post.
    Client situation:  Our client is implementing ECC 6 and is using the "New-GL" features.  Because of business requirements, the coding block has been extended (not insignificantly - 18 extra fields at the moment) to accommodate legal, regulatory and management reporting.  The reporting solution includes standard ECC reporting (e.g. report writer, report painter reports) as well as feeds to BW (BI 7).
    The Challenge:  Our understanding is that adding all of the coding block extensions to the New-GL tables (ie. FAGLFLEXA and FAGLFLEXT) may lead to performance degradation in the ECC system.  However, we still need to accommodate the requirement to report by the additional dimensions that are not currently included in the New-GL, so our challenge has been to find a solution that minimizes performance issues, while still allowing us to have all the necessary dimensions with which to do the required reporting.
    What we would like to know:  How have you handled this in similar situations?
    Have you added to the New-GL tables? How many fields? Performance issues encountered?
    Have you created additional table group(s) based on the New-GL and then modified that structure to have the new fields?  How does the additional table group work co-incident with New-GL (e.g. does the additional table group receive document splitting information?)?
    Have you created custom extractors for BW?  On what basis (we understand that FAGFLEXA cannot be created as a datasource to feed BW)?

  • Creating view for DataSource from table containing Structures.

    Hello All,
    I need to make a datasource for HR PY master data from a table PA9004(its special for a HR infotype) which needs some fields like PFOBEE(PF-Opening Balance-Ee).
    Field(PFOBEE) is part of a structure(PS0008) which is included in the table PA9004.I tried where-used list for this structure in programs,FuncModules,Tables but got no result of any transparent table.
    To form my Datasource I tried creating the Database view, which had inconsistencies. I tried using the table PA9004, which said "This operation failed, because the template structure quantity fields or currency fields, for example, field PFOBEE refer to a different table."
    Also Projection view cant be used for generic datasources.
    Even Create Infostructure(MC21) does not work for HR: PY-IO.
    All suggestions welcome.Mail me at [email protected]

    Hello All,
    I solved this problem by forming my generic datasource(TCode RSO2) on a Infoset which had the table pa9004. There were some warnings regarding the use of the development class, but finally I had the datasource ready.
    I checked the datasource is working using the RSA3 TCode and the DS is perfectly extracting the data. I replicated this DS in BW server and it appears exactly where I wanted.
    Some colleages had suggested writing a functional module to extract the data, which must be right but I have not tried this option yet.
    Experts may please review my solution and offer tips. I am willing to offer points to anyone offering a more elegant solution.

  • Handling Unit Details for Delivery needed (Table VEKP in R/3)

    Hello all,
    do you know if there is any standard extractor for handling unit details of an R/3 delivery?
    I searched the Business Content and the available Extractors in R/3 but cannot find any.
    If there is none, what would be the best way to get some content of Table VEKP e.g. VEKP-VHILM? Define an own structure and create a view? Can I also do this with the delta functionality?
    Many thanks for your answers upfront.
    Peggy

    indeed my question "short description" is wrong, as one material can have only one base unit.
    If the base unit of one material in my system is CRT (crate) and the description is "box with 30 table  napkins packs", I need to know where store the description of the single "table napkins pack" or "pallete with 20 boxes of 30 table napkins packs" available under "Units of measure" of that material.
    The full hierarchy (pack-Box_pallete) of the material units are available in one SAP material, but there is only one place for one description.
    Thanks

  • Relevant datasource for ANLA and ANLC tables?

    Hi,
    In breif these are the relevant tables
    ANLA and ANLC , in this i can able to find the datasources for ANLC i.e, 0fi_aa_11, but my requirenet is to have both tables in one datasource. And more as far as my search there is no relevant datasource for ANLA table, if  not how to acheive this?
    Thanks in Advance
    vas

    Or else you can use two datasources for this purpose. Check here:
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/erpfi/overview%252bbw%252bdelta%252bextraction
    Thanks...
    Shambhu

  • ESLL - Datasource for this table ESLL???

    Hi gurus!
    Somebody knows any datasource for ESLL table???
    Thanks a lot!
    BR

    Hi Leticia,
    No there is not unfortunately, suggested solution is to create a DB view on tables like ESKN,ESSR,ESLL,EKPO (SE11) so data can be linked up properly to Purchasing doc and then build a generic Datasource on top of that (RSO2).
    Hope this helps.
    Grtx
    Marco

  • How to create  a datasource for 0COSTCENTER to load data in csv file  in BI

    how to create  a datasource for 0COSTCENTER to load data in csv file  in BI 7.0 system
    can you emil me the picture of the step about how to  loaded individual values of the hierarchy using CSV file
    thank you very much
    my emil is <Removed>
    allen

    Step 1: Load Required Master Data for 0CostCenter in to BI system
    Step 2: Enable Characteristics to support Hierarchy for this 0Cost Center and specify the External Characteristic(In the Lowest Node or Last Node) while creation of this Characteristic InfoObject
    Step 3: On Last Node of Hierarchy Structure in the InfoObject, Right Click and then Create Hierarchy MANUALLY by Inserting the Master Data Value as BI dosent Support the Hierarchy load directly you need to do it manually....
    Step 4: Mapping
    Create Text Node thats the first node (Root Node)
    Insert Characteristic Nodes
    Insert the Last Node of the Hierarchy
    Then you need to create a Open hub Destination for extracting data into the .csv file...
    Step1 : Create the Open Hub Destination give the Master Data table name and enter all the fields required....and create the transformations for this Open Hub connecting to the External file or excel file source...then give the location on to your local disk or path of the server in the first tab and request for the data...It should work alright let me know if you need anything else...
    Thanks,
    Sandhya

  • FS-CD / CRM - Datasource for Insurance Object

    Hello Gurus,
    Does anyone know of SAP Standard Datasource for Insurance Object.
    Insurance Object is used in FS-CD and CRM.
    The table where Insurance Object is stored is DIMAIOB and the tcode in ECC is INSODISP.
    thanks in advance

    Hi,
    I involved FS-CD implementation very long back and that to not in depth, but I remenber, we used 99% custome defined DataSources only using Function Modules.
    Check in the following links, you mayy get some information
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/84/97834071adc65de10000000a155106/frameset.htm
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/24/0d723521faee41e10000009b38f889/frameset.htm
    http://www.sap.com/africa/industries/insurance/pdf/FSRI_Release_Notes_471_en.pdf
    Thanks
    Reddy

  • Extractor for Table BKPF

    Hi ,
      I wanted to know the extractor for table BKPF . Where can i know or which is the extratcor
    Regards
    Ankit Vaish

    Hi,
    I hope, The datasource 0FI_GL_4 would be useful to you.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8b/02f93abb013b0de10000000a114084/frameset.htm
    With rgds,
    Anil Kumar Sharma .P

  • Report Writer report required by Business Area GSBER  for table GLPCT  ECC6

    Please help,
    I have a requirement for report writer report by Business Area (GSBER) for table GLPCT.
    I am using Libruary PCA which has GSBER already activated
    In report I am able to select GSBER in General Data Selection and generate.
    However when I execute report I get error message GR410 "Characteristic GSBER cannot be combined with key figures" .
    I have looked at SAPnotes 929889 1155524 and 358251, which describes solution to add field to CCSS table (structure CCR1S) however I cannot work out what structure to change for table GLPCT used in my report.
    Steve
    Solution was to use Libruary 8A3
    Edited by: Debra Dunford on Jun 29, 2011 10:34 AM

    Hi ,
    If you are using the cube: 0FIAP_C20, then i guess you are using the standard extractor 0FI_AP_20 . One thing which i remember that there is a standard view in ECC : LFC1_AEDAT.
    This view has two tables : LFC1 and BWFI_AEDA2.
    LFC1 - Vendor master (transaction figures)
    BWFI_AEDA2 - BW FI: Log Table for Changed Transaction Figures
    This standard extractor uses table LFC1 to show vendor balances.
    And the table BWFI_AEDA2 contains the log of the changes that has taken place business area wise and account no of the vendor wise .
    Please check the view definition to confirm the same . Once you will see the joining conditions in this view you will get a clear picture of the above point .
    So for your issue, you can do datasource enhancement of 0FI_AP_20 .
    The logic will be based on LIFNR,BUKRS,GJAHR available from the datasource , fetch the business area from this view and populate it in your datasource .
    But first check in the table BWFI_AEDA2 whether for the field BWFI_AEDA2-TABNAME= lfc1 , business areas are maintained .
    Hope the above reply was helpful.
    Thanks & regards
    Edited by: DEADLOCKS on Apr 23, 2011 10:52 AM

  • Why the system create HU that already exists  in table VEKP when I use BAPI_HU_CREATE?

    Hi All,
    When I use the BAPI_HU_CREATE  to create HU, the system give me a HU and it inserts a line in Table VEKP, however when I search in table VEKP  with field HU EXIDV, I find  two entries with the same HU, one of them has VPOBJ 01 and the other has VPOBJ 12, So when I execute  transaction LM46  the system shows “The system could not find transfer order for execution” because the system search in table VEKP it find the first line with VPOBJKEY = delivery  and STATUS = 0020, however those delivery is not assigned to transfer order that I want to confirm transfer order.
    Why the system create HU that already exists  in table VEKP when I use BAPI_HU_CREATE?
    Thank you!
    Best regards

    Do you want to say that you got 2 HU from BAPI_HU_CREATE?
    I think you only got the one which has VPOBJ = 12 Non-Assigned Handling Unit
    which is exact what the BAPI is used for, see the docu in SE37. Didn't you yourself add this EXIDV in the IDoc?
    VPOBJ = 01 Outbound Delivery
    If you want to pack the Outbound delivery then you should use BAPI_HU_PACK.

  • Standard Datasource for Payment & Proposal List (S_P99_41000099)

    Hello,
    Looking for standard datasource in SAP R/3 for Payment List and Proposal List.
    The R/3 Query is S_P99_41000099. The fields for this query are coming from PAYR and REGUH tables.
    If we have any standard datasource available, then we can use that otherwise i have to go for database view and
    create a generic datasource on the view.
    I have another issue too, basically i'm also working on Check register Query, and we have ECC 6 (Net-weaver 4) and the standard datasource for Check register is available from ECC 6 SP-3 onwards. Do we have any other alternative for this? Installed the BI content for BW objects as we have 0FIAP_C50 available. But wondering how to work on the back end datasource. In the check register query, we have all the fields coming from PAYR Table.
    Please can someone please guide me on this?
    Thanks
    Vandana

    Hi,
    There is no standard datasource on PAYR table.
    Check the below thread -
    PAYR Table Data source
    Regards,
    Geeta

  • Standard BW Datasource for Packing Instructions

    Hi BW Experts,
    Are there any Standard BW Datasources for Packing Instructions.
    The Packing Instructions data mainly resides in PACKPO, PACKKP, PACKKPS tables in SAP.
    If there are no Standard extractors or Data Sources , what are the options of extracting this data from SAP into BI.
    I got to know there a few extract views, how do we use them.
    MGV_V_PACKIN
    MGV_V_PACKIN2
    V_PACKIN
    V_PACKIN2
    Waiting for your kind response.
    Thanks,
    Daniel

    Hi Daniel,
    I don't think you will find Business Content for those tables. That leaves you with the option to create a Generic DataSource yourself (t/code RSO2). Here you can use a table or a view as source.
    Best regards,
    Sander

Maybe you are looking for