DataSource Issue in BI7

Hello guys,
I am creating Generic DS Z_ABC using VBAK table fo SD component.
I am facing couple of problems while moving further, 1. When I try to Maintain Exract structure for this DS by hiding some Fields it wont let me save, it says "there are still error in OLTP source". could anyone tell me what this message is referring to.
Other issue is, I tried to move forward without modyfying any Fields, I am not finding my DS in BI Side.
I replicated DS by right clicking my source client, but when i search it nothing comes up with that DS in BI.
I checked in RSA6 and that DS is definately there, is there something i am missing here..I am working in Dev Server....what am i doing wrong with the replicatoin process here..? anyone please suggest.
thanks
dk

Hi all,
It seems like .i have problem with RFC connections . I checked in SM59 to check if RFC connection to Source system is in good place. As soon as i chose my client's name from under ABAP connections node , it gives me a message "user password invalid for identifier /RFC/ ClientName(see long text)", it says "Connection Error" when I click on Connection Test tab on the top. Could someone walk me through on how I can set up RFC connection in BI 7 to Source System ECC. any advice will be appreciated.
thanks again
dk

Similar Messages

B1 8.8 and Crystal Reports datasource issues

Hello everyone,
the HowTo on using CR with 8.8 recommends the SAP B1 Datasource type for reports.
In our setup this datasource type does not work (logon failed message after entering credentials) while OLE (ADO DB) does.
SAP B1 Datasource type would be of great help to our report designers due to annotated tables.
We were not able to trace what is going wrong i.e. we found no more detailed error msgs.
Is there any documentation on the B1 datasource type and how to investigate issues with it?
Many thanks in advance!
Edited by: Wolfram Richter on Nov 9, 2010 2:01 PM

Strange, very strange...
I've done a little test in our setup. Trying to connect to our SBO 8.8 server, I selected the SBO server, the license server and the database type, leaving the credentials blank. Opening the list with companies, it showed all companies.
So something must be going wrong trying to reach either the SBO server or the license server. Like it can't connect to the SQL Server. I don't know if there are any differences in actual connections to MS SQL Server between OLE and SBO connections.
I'm running out of clues. At this point I can only think of two things, but assumed that you used the same info with the OLE connection, they're unlikely. Those are IP resolving issues and MS SQL Server instances.

Create datasource issue with Planning 9.3.1

The plan is to upgrade to 9.3.3 so will need 9.3.1 first.
I have installed 9.3.1 Planning on win 2003 server and finished the configuration steps as well.
All my hyperion planning databases are on a Oracle RAC system 11g installed on Linux.
The individual SIDs are hyp1 and hyp2 and we use HYP to connect.
I used HYP as SID for all other configuration steps and was successful but when I try to use HYP as SID in the create datasource process I get the error " Relational Database Connection Failed:= :[Hyperion][Oracle JDBC Driver][Oracle]ORA-12505 Connection refused, the specified SID (HYP) was not recognized by the Oracle server."
If I use either HYP1 or HYP2 it works fine but does not work with HYP.
Is this an issue with 9.3.1 or will this continue to be an issue with 9.3.3 as well? Any suggestions to use HYP as my SID instead of using HYP1 or HYP2?
Thank you.

That article didnt mention planning but I wonder if it is possible to create a datasource using the standard method pointing to one db instance
Then go into HSPSYS_DATASOURCE and update rdb_server_url to something like (it will need updating to the correct path)
jdbc:hyperion:oracle:TNSNamesFile=D:\oracle\\product\\10.2.0\\db_1\\NETWORK\\ADMIN\\tnsnames.ora;TNSServerName=HYP
or may be worth having a look at http://www.datadirect.com/resources/jdbc/oracle-rac/connecting.html
as 9.3.1 uses datadirect jdbc drivers.
Cheers
John
http://john-goodwin.blogspot.com/

Customer Statement Report converted from PLD to CR - extra datasource issue

Hi All,
We've come across an issue where we have used the Crystal Converter to convert a PLD layout of the Customer Statement (Collection) Report to a CR layout (done via CR 2008 using the 8.8 standard integration).
The layout converted fine and we've got most standard fields working and showing the correct values etc. However we had a requirement to also bring in the Original Document Amount into the layout (which is not a standard PLD field unfortunately!) and we had to do it via an extra datasource based on a pretty straightforward view we created in that company database - which contained columns CardCode, DocName (which was the transaction type + number e.g. IN 12345) and of course, DocTotal.
We then added the datasource (via ADO connection) and linked the DocName to the Reference field that is already present in the standard layout and contains the same data as our cutom DocTotal - and remarkably, this actually produced the correct results - i.e. we managed to get the Original Document Amount to appear in the lines of the statement together with the open invoice balance, reference, posting date, due date etc - however this seems to affect the other areas of the layout - and we lose the header and footer information completely; whilst retaining only the lines level information.
We've tried a few things such as linking the CardCode to a header field as well but it doesn't seem to bring the rest of the layout back. So in a nutshell, as soon as we bring that extra field in from the added datasource, we get the correct original document amount appearing in the lines but that's all we see in a print preview - the line level data of the statement. The header and footer information disappears.
And here is the big question - any thoughts on this and has anybody experienced a similar problem in an integrated CR? We think it may possibly be due to the extra datasource - perhaps the 8.8 - CR integration doesn't know how to handle the additional datasource AND it's own standard datasource (which is referencing the PLD fields) properly yet?
Thoughts please because I'm sure this will turn into a common issue sometime soon.
Edited by: Mohsen Qureshi on Jul 2, 2010 11:04 AM

Hi Mohsen,
Perhaps you are able to help me.
I have successfully converted the SAP system 'Customer Collection Report (One Page per Customer)' PLD into Crystal using the Crystal converter. I now run my customer ageing report in SAP, however, when i print preview the Crystal layout, the "detail" section of the report repeatedly displays the "text" label of each field. I'm assuming this is because the system PLD for the collection report, does not use database fields for the detail/repetetive area - instead it uses text fields to pull through fields such as document no etc etc.
I would have throught that a crystal conversion from an untouched system layout would have worked, but it hasn't.
My question - Did you have to perform any additional work to the crystal report after the conversion?
Any suggestions or tips on how to get the system would be greatly appreciated.
Thanks in advance,
George Kantzavelos

JDBC Connector - Datasource issue

Hi,
We have a datasource created in JDBC Connector in Visual Admin Services. The issue is whenever there is a connection failure due to network or the database system is restarted the JDBC datasource doesn't work and we get invalid connection in our application.We have to stop and restart the datasource through Visual Admin to make it work.
Is there any resolution that we dont have to restart the datasource manually in case of connection failure.
Appreciate your support

Hi,
I had same problems!
I only know of a workaround for JMS adapter which showed same issues after a MQ restart. There an option got introduced to "ping" the source / target to recreate the connection by a parameter to be set in the channel itself. I'm not sure this option is also available for JDBC channels...
Does anybody got news here?
Thanks,
Kai

Authorizations Issue in BI7

Dear Gurus,
I am having an issue with regard to Authorizations. In BW3.x with respect to query designer an end user can just change the local view of a query. How about the same thing in BI7? What are the procedures i need to follow to give an user authorizations to only the edit query local view. Is there any BC role or Profile that i can just add to get the desired result. Kindly give the inputs in a detailed manner as I am new to BASIS part.
Your Kind Inputs will be definitely rewarded with a great honour.
Regards
Mohan Kumar
Message was edited by:
mohan kumar

Did you tried defining authorization objects using transaction code RSECADMIN, as this is working of me for Profit Centers.
Thanks.
Sachin

How the standard BW3.5 DataSource used in BI7

Hi,
In BI Content, there are huge amount of standard BW3.5 DataSource.
They can be activated from R/3 side and replicated to BI.
Is there anyone know if these DataSources are BW3.x? and if I would like to use the new BI7 transformation technical to these DataSources, what should I do? currently there is an error message when using these 3.x datasource with transformation. for example, for datasource 2LIS_12_VCITM.
Many Thanks
Jonathan

Hi,
All the standard SAP datasources in BI content are 3.x datasources. which means that if you only activate them you cant create a transformation on them. Only update and transfer rules are possible. You'll need to install these datasources and then migrate and activate them inorder to convert them to a 7 datasource. To migrate them, first install them, then right click and choose the migrate option.
Also while migrating choose the migrate with export option, so that you'll be able to restore them to the older versions incase of any problems.
Hope this helps.
Regards.

How do I solve a "ManagementPackSecureReference" OLE DB datasource issue in SCOM 2012R2?

I'm new to SCOM...
In the SCOM console under Authoring/OLE DB Datasource I have users who receive this error when they attempt to do a"Connection String" test. (see screenshot below)
The users said they have a good number of connetions strings that are getting this error when they perform a test. Where can I go to start troubleshooting this issue?
We recently implemented a new watcher node server and I'm thinking this may be the issue, but I'm not sure how to troubleshoot it.
Thanks for the assistance,

Sorry about that. Here you go:
Note: The following information was gathered when the operation was attempted. The information may appear cryptic but provides context for the error. The application will continue to run.
Microsoft.EnterpriseManagement.Common.ObjectNotFoundException: An object of class ManagementPackSecureReference with ID xxxxxxxx-0a93-048b-b4d5-xxxxxxxxxxxxx was not found.
   at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
   at Microsoft.EnterpriseManagement.Runtime.TaskRuntimeServiceProxy.SubmitTasks(IList`1 jobDefinitions, Guid batchId, JobCategory category, Boolean registerCallback)
   at Microsoft.EnterpriseManagement.Runtime.TaskRuntimeManagement.SubmitTaskInternal(ICollection`1 targetIds, Guid taskId, TaskConfiguration configuration, TaskStatusChangeCallback callback)
   at Microsoft.EnterpriseManagement.Runtime.TaskRuntimeManagement.SubmitTaskInternal[T](IEnumerable`1 targets, Guid taskId, TaskConfiguration configuration, TaskStatusChangeCallback callback)
   at Microsoft.EnterpriseManagement.Runtime.TaskRuntimeManagement.BeginExecuteTaskInternal[T](IEnumerable`1 targets, Guid taskId, TaskConfiguration configuration, AsyncCallback callback, Object state)
   at Microsoft.EnterpriseManagement.Runtime.TaskRuntimeManagement.BeginExecuteTask[T](IEnumerable`1 targets, ManagementPackTask task, TaskConfiguration configuration, AsyncCallback callback, Object state)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Pages.ChooseOleDbConfigPage.RunTask(Object sender, ConsoleJobEventArgs e)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)

Data load issue in BI7.0 Enviornment

Hi,
We went to BI7.0 technical upgrade from BW 3.x recently and we are upgarde the system BI 7.0. We have new requirement for that i need to create a copy cube from Base(A) cube and load the data from base(A) cube to new (B)cube .
I need to enhance the Base(A) cube with few key figures and need historical data that why i am not using Remodeling method.These key figures are attributes of masterdata
For loading data from Base cube (A) to New Cube(B)
Need to follow the below steps:
1>Export data source
2>create update rules
3>create info pack
or
Do i need to create
1>transformation
2>DTP
The Base (A) cube is loading from two ODS and i am going to write update routine between ODS and cube (A) to get populate new key figure in the cube using update routine,so that i will pick the data from the master data and these new key figures as attributes of master data.
Please some one can advise me on it.

Thnaks alot khaja for quick response.
I will store key figures in cube A and it require historical data.
These key figure are attribute of Material master.Will populate these key figures in cube from masterdata using update routine.If i go for Remodeling then i would not get historical data.
If i get the key figure from master data then it would load historical data righ?
I want to move the Cube A to Cube B and load the data from A to B cube
Once the enhancement is done i will bring back data from Cube B to cube A.
Please advise me :
Once the data is loaded into cube B and delete the whole data in cube A
Instead of bring back B data to cube A ,I would like schedule data from ODS to cube A
Which is in the flow.
Do i need to create Transformation and DTP or Update rules and Infopackage?
Please advis me in this scenario

Wrong Record count in Monitor maybe datasource issue

Hi Gurus,
I have an interesting problem; I am not sure if these are related problems. First, I am loading data from a flat file to an DSO (using BI 7.0) I created a transaction datasource. Does it technically matter if I create a master data attribute datasource vs a transaction datasource when loading to a particular InfoProvider? Can I specify that my datasource is a master data attribute datasource when loading into a DSO. Will the system behave differently during a dataload based on the datasource type?
Here is why I am asking my question: I created an InfoPackage for the new datasource and when I execute it; it is reading the wrong record count based on my file. I only have 20 records (using a test file); but yet it is saying 98 in the monitor? I double checked and my file only has 20 records and on the "Extractor" tab, the system is pointing to the correct file. Can the datasource have any connection to this problem?
Thank you

Hi,
Technically it is possible to fill a DSO from e.g. a Master Data InfoSource but obviously before creating a new DataSource you must decide whether it concerns Master vs. Transactional data (depending on the nature of it).
In some rare cases Transactional data from e.g. R/3 is treated as Master data in BW, for example PM orders.
About your recourd count problem, do you have 98 records in the PSA as well? (because that should be the 'bold' representation of your file).
If PSA gives 20 recs than the problem lies elsewhere (upstream): is there any abap-code in Startroutine or elsewhere doing some sort of redistribution of the data before it is loaded into the DSO?
Hope this helps!
Grtx
Marco

Flat File DataSource Issue

Hai
Im loading the data from flat file to DSO in BI-2004s.
I have a flat file like below
ZEMP ZEMPNAME   ZAMOUNT
10       London           100
20       India                200
Im trying to create the DataSource. But in 'Proposal' tab imgetting all three infoobjects in row instead of three rows . Like below
Im getting like
ZEMPZEMPNAMEZAMOUNT as a one value .
why it is like this
Pls tell me
kumar

Hi Ravi,
Hope this helps -
Loading Text Files(.TXT) into BW with HEX option
proposal tab
FIELDS TAB
http://help.sap.com/saphelp_nw04/helpdata/en/8e/dbe92341c84242be2c7d3917f1c197/frameset.htm
Bye...

Visual Studio 2013 DataSource issue: Not pointing to right server

Doing some work for college. I have been given a starting point in an application, expected to finish it. Not an issue.
The data source that is attached to the application points to the wrong server, and I can't for the life of me change where it's points (SQL2008EXPRESS as opposed to my server which is simply SQLEXPRESS). I'd gladly just create a new data source
and code it up, but, there's a few table adapters already in it that I don't know how they are set up, nor can I edit them to copy the information to move them over.
I can't run my application because the data source can't connect. I can't change the data source. I can't create a new data source.
How do I proceed? My instructor has been of no help for the entire class.. and has given simply a dumb response to my question to him. Thanks.

Hello,
Please take a look at the following articles:
Walkthrough: Creating a Local Database File in Visual Studio:
http://msdn.microsoft.com/en-us/library/ms233763.aspx
How to: Connect to Data:
http://msdn.microsoft.com/en-us/library/ff852017.aspx
Regards,
Elvis Long
TechNet Community Support

Generic DataSource Issue

Hello all,
I created a FM for a generic datasource using as a template the standard FM from SAP - RSAX_BIW_GET_DATA_SIMPLE
If I execute the FM I get the data.
But if I want to load from BW, the process keeps running and in the source system I have:
Job started
Step 001 started (program SBIE0001, variant &0000000000353, user ID BWREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZBWSTOR_LOC_ATTR
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000000000                              *
abap/heap_area_total.......... 2000000000                              *
abap/heaplimit................ 20000000                                *
zcsa/installed_languages...... DEFIS                                   *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000000                                 *
ztta/roll_extension........... 2000000000                              *
BEGIN BW_BTE_CALL_BW204020_E 534
END BW_BTE_CALL_BW204020_E 534
BEGIN EXIT_SAPLRSAP_002 534
END EXIT_SAPLRSAP_002 534
Asynchronous send of data package 1 in task 0002 (1 parallel tasks)
IDOC: Info IDoc 2, IDoc No. 105641, Duration 00:00:00
IDoc: Start = 09.11.2009 14:09:35, End = 09.11.2009 14:09:35
tRFC: Data Package = 1, TID = AA38E15646794AF877010A77, Duration = 00:00:00, ARFCSTATE = RECORDED
tRFC: Start = 09.11.2009 14:09:37, End = 09.11.2009 14:09:37
Asynchronous transmission of info IDoc 3 in task 0003 (0 parallel tasks)
Can you please help me?
Thank you in advance
Ramona

Hi Ramona,
Try to check the logic written for the FM, there might unended loop in the code.
Regards
Konda Reddy

Migrating DataSources Issue

Hi All,
I am trying to migrate my hierachy datasources from 3.5 to 7.0. I am getting the below error message:
"DataSource 4R_BUKRS_0000_HIER(PRDCLT100): Data type H not supported by object type RSDS"
I am able to migrate all other objects other than hierarchies.
Any help?
KJ!!!

Hi KJ,
<b>You cannot migrate hierarchy DataSources, DataSources that use the IDoc transfer method, export DataSources (namespace 8* or //8) or DataSources from BAPI source systems.</b>
Check below for more insights-
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/682cacb88f297ee10000000a422035/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/43/682cacb88f297ee10000000a422035/content.htm</a>
Hope it Helps
Chetan
@CP..

Authorization issue in BI7.0

Hi friends,
Following is the situation,
I have created two Authorization Anlysis objects on 0COSTCENTER.
AUTH1 = COSTCENTER1, INFOPROV = A
AUTH2 = ALLCostcenters, INFOPROV = B
I have two queries built on each infoprovider.
Scenario1.
Assigned AUTH1 to User XYZ and when i run the Query on INFOPROV A, the variable on costcenter shows only COSTCENTER1 when i do the F4 on variable. : No problem with this scenario.
Scenario2.
Assigned AUTH1 and AUTH2 to User XYZ and when i run the Query on INFOPROV A, the variable on costcenter shows ALL COSTCENTERS when i do the F4 on variable but i am expecting only COSTCENTER1.
Please suggest how to take handle this situation.

Take a look at these links...
http://help.sap.com/saphelp_nw04/helpdata/en/e7/56b23bdb0d0156e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/a0/48f438f3422f2ce10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/59/2cf4388818ac2be10000000a114084/content.htm

DataSource Issue in BI7

Similar Messages

Maybe you are looking for