Datasource not displayed
Hi All,
We have created a new source system of APO in BW Development server.
We have replicated the total Source system. While replication it was showing that "892" datasources are replicating. But when in datasource tab we could only 7 datasources. What will be the reason for this?
Please tell me any settings has to be changed, or modified?
Note: while we search for a particular data source we could find the data source but it was not displaying in the data source tab.
Thanks in Advance.
With Regards,
Ravi
The Datasource is not displayed on BW side.
Because the data sources are on Unassigned Nodes (Nodes not Connected).
This is the solution, while replicating the datasources in BW, the datasources which are in Unassigned nodes will not get replicated.
Similar Messages
-
Queue for datasource 0CRM_SRV_IBASE_ATTR not displaying in SMQ1
Hi All,
The queue for the datasource 0CRM_SRV_IBASE_ATTR is not displaying in SMQ1 (Outbound queue).
Please share your inputs.Hi Pramod,
SMQ1 will only show an entry, when there are available data for the delta queue, i.e. someone has made a change or added new data.So checking RSA7 and SMQ1 will give the same result, if RSA7 shows more than 0 entries.
The problem may be the init. What init did you do: an init with data, or an init without data, or an init with a filter. Experience with our CRM system tells me, best way to initialize any CRM data is to do a full data init (without filter) or a init without data (without filter). I wonder about the FULL load you mentioned ? When did you do it ?
Kind regards,
Jürgen -
HI,
I have toff situation where we deployed bi dashboards in our site and it works some time and some times not,
and some times it keep loading and throw a login window.
works when
we restart performance point service and if not work
we re create secure store service and generated new key and create new pps service application
before that we stopped secure store and pps service using c.a in application server
we are using ssas for datasource to connect from dashboard designer
we have seperate server for ssas dbs
seperate application server running: pps service and secure store service
two web front ends: one of running secure store
1 Domain controller + central admin service running
some times after 4 -5 hours bi dashboards works , we dashboards not display data and throw un expected errors,
also when we try to connect using a dashboard designer from a seperate client machine in same domain ,we have same issue , we unable to connect to ssas datasource server, and if connect some times unable to deploy dashboards.
we tried every thin icreased server time out values in ssas server
:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config\msmdsrv.ini. in this location
and in
c:\program files\common files\microsoft shared\web server extensions\14\webclients\ppsmonitoringServer\client.config
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
maxDepth="2147483647" />
even we have same issue
is some thing happening when dashboards working some time and after some time not
is a secure store crashing or its still request pending in IIS and not authenticating to data soruce why
below are the logs
Here are the results of the log analysis :
server wfe1
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services 39 Critical A PerformancePoint service application call was aborted by the caller. This may indicate the HttpRuntime executionTimeout for the Web Application
is configured to a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services ef8z Critical حدث
استثناء
أثناء عرض
عنصر ويب.
قد تساعد
معلومات التشخيص
التالية في
تحديد سبب
هذه المشكلة: Microsoft.PerformancePoint.Scorecards.BpmException: لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. رمز
خطأ "خدمات PerformancePoint"
هو 20700. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C SharePoint Foundation Runtime ba3q Medium Redirect to error.aspx?ErrorText=Request%20timed%20out%2E failed. Exception: System.Web.HttpException: The remote host closed the connection. The error code is 0x800704CD.
at System.Web.Hosting.IIS7WorkerRequest.RaiseCommunicationError(Int32 result, Boolean throwOnDisconnect) at System.Web.Hosting.IIS7WorkerRequest.ExplicitFlush() at System.Web.HttpResponse.Flush(Boolean finalFlush)
at System.Web.HttpResponse.End() at Microsoft.SharePoint.Utilities.SPUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryString) 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:47:32.69 w3wp.exe (0x2128) 0x2154 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 78c107cd-0d4b-46f5-8e1a-0d9b4ebc7b29
09/01/2014 15:07:40.74 w3wp.exe (0x2128) 0x209C PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/28_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location) at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) abf0263d-7333-4e4f-9cd4-a3a4dcb700c0
09/01/2014 15:13:25.92 w3wp.exe (0x2128) 0x18DC PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/218_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location) at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) b35bf864-54f4-43fa-88a8-44cdf938bfa2
09/01/2014 15:11:10.87 w3wp.exe (0x2128) 0x1F88 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Courts/Bic/Lists/PerformancePoint Content/4_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location) at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 7cea0eb6-214f-4d7b-a6e7-97a0fe11c956
09/01/2014 15:11:40.87 w3wp.exe (0x2128) 0x2150 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/162_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location) at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 4154222b-6ff0-4b64-81b8-d08501a19278
server wfe 2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
In the Roiscan logs we get an error in regards to the English Language pack:
Review Items
============
Error: Product {90140000-1015-0409-1000-0000000FF1CE} - Microsoft SharePoint Foundation 2010 1033 Lang Pack: has unexpected
file state(s).
adilchinnijagadeesh,
You suck!
Signed: The rest of the universe.
... and quit crossposting FFS... it really is quite annoying! -
BPM reporting not displaying data for newly added field
Hello All,
I have a BPM process up and running fine. I have added reporting for monitoring no. of context field. I have also created a VC model for displaying the BPM report data. However, VC application is displaying only the context field that I had selected initially during the New Reporting Datasource creation. It'd not display the reporting data for the field that I added later.
Please helpHi Apoorva ,
Have you checked in the process repository whether your new process is activated or not?
Thanks & Regards,
Rohit -
New created values are not displaying after upload
Hi
I have created 2 key figures(Infoobject),4 new nodes and leafs(Hierarchy), to include the new logic at R/3 end as well as BW end.Every thing is fine even after doing full upload(repair).
When i execute the query the data is not populated in its respective infoobjects and hierarchy nodes and leafs.
Even 1 infoobject which is used for Counter value is not showing the counting as it's defined as aggregate to the info object Count and that included to ODS which is responsible for counting. after full upload it's not showing the counter values.
After full upload(Repair) all these entries are not displaying in the report against the data which is present at RSA3 level.
Can any one tell me how to make them available in the query even after data is uploaded / available in the bw.
Gaurav Upadhyaya
Edited by: Gaurav on Aug 26, 2008 10:55 AMHi,
You can´t see hierarchies in an infoprovider, so this is ok. A hierarchie is a part of an infoobject. But you say you have 2 new kefigures and they are not filled. I suppose you added both keyfigures to your DSO/Cube and to the datasource (in your source system). Have you extended the transformations between datasource <-> DSO and DSO <-> Cube too? Are the keyfigures correctly connected (in the transformations)? If yes, check your PSA after loading. Are the keyfigures filled here? If no, check the RSA3 in your source system. Are the fields for you keyfigures filled there?
Pls. check this all and tell us, what the result is.
Regards -
Report not display in report viewer
i try to show ssrsc reports in asp.net web page using report viewer
code
protected void Button1_Click(object sender, EventArgs e)
ReportViewer2.ProcessingMode = Microsoft.Reporting.WebForms.ProcessingMode.Remote;
ReportViewer2.ServerReport.ReportServerUrl = new Uri("http://lenovo-pc/ReportServer");
ReportViewer2.ServerReport.ReportPath = "/Report Project1/Report1";
ReportViewer2.ServerReport.Refresh();
where is the probelm... and why report not display?Hello,
In SSRS, the issue is occurred when the credential of the datasource is configured with “Prompt for credentials”. Please check if you configured the credential with "Stored Credential" of the datasource. You can refer to the following steps:
Click the black arrow of the report, select Security option.
Click Data Sources in the left pane.
1) If it is a "A custom data source”, please check the item "Credentials stored securely in the report server", and type the valid username and password. If the user is a Windows Account, you need to check item "Use as Windows credentials when connecting
to the data source".
2) If it is a "A shared data source", please remember the path, and then open the data source from the Report Manager. Make sure the credential type is "Credentials stored securely in the report server".
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
I built a login form and put an Application.cfc file in the folder i want to restrict and it's not displaying the simple text i put in the index.cfm for testing purposes.
======= Application.cfc code (in folder name "admin_section")==========
<cfcomponent>
<cffunction name="onRequest">
<cflogin>
<cfif IsDefined("FORM.Login_btn")>
<cfquery name="qLogin" datasource="poll">
SELECT UserLogin, UserPassword, UserRoleID
FROM Users
WHERE UserLogin = <cfqueryparam value="#FORM.UserName#" cfsqltype="cf_sql_varchar">
AND UserPassword = <cfqueryparam value="#FORM.Password#" cfsqltype="cf_sql_varchar">
</cfquery>
<cfif FORM.username IS "#qLogin.UserLogin#" AND FORM.password IS "#qLogin.UserPassword#">
<cfloginuser name="#FORM.username#"
password="#FORM.password#"
roles="#qLogin.UserRoleID#">
<cfelse>
<cfset request.errorMsg = "Incorrect login; please try again">
<cfinclude template="../login/login.cfm">
<cfreturn>
</cfif>
<cfelse>
<cfinclude template="../login/login.cfm">
<cfreturn>
</cfif>
</cflogin>
</cffunction>
</cfcomponent>
======= Application.cfc End =======
====== Login Form (in folder name "Login" ====
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
<cfform action="../admin_section/" method="post">
<table width="250">
<tr align="center">
<td colspan="2">
<cfif IsDefined('Request.errorMsg')>
<cfoutput>#Request.errorMsg#</cfoutput>
<cfelse>
Please Log in.
</cfif>
</td>
</tr>
<tr>
<td>
<font size="-1">User Name:</font>
</td>
<td>
<cfinput type="text"
name="UserName"
required="yes"
message="- You must enter a user name!">
</td>
</tr>
<tr>
<td>
<font size="-1">Password:</font>
</td>
<td>
<cfinput type="password"
name="Password"
required="yes"
message="- You must enter a password!">
</td>
</tr>
<tr>
<td> </td>
<td>
<cfinput type="submit" name="login_btn" value="Log me in!" >
</td>
</tr>
</table>
</cfform>
</body>
</html>
It takes me to the page, but nothing displays. Again i have simple text for testing purposes.
Any help would be great.Your problem is that you're using onRequest, which replaces the default page rendering event. There are two ways you could fix this.
1. Use onRequestStart instead. This will happen before your page is processed, rather than instead of your page being processed. This is the approach I'd recommend.
2. Add code at the bottom of your onRequest to include the page to be processed. You'd identify this page by using the targetPage argument and including it:
<cffunction name="onRequest">
<cfargument name="targetPage" required="true">
<cfinclude template="#targetPage#">
</cffunction>
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/ -
0GLACCEXT hierarchy nodes description ( text ) not displaying
Hi Gurus,
I have uploaded 0GLACCEXT hierarchy from ECC system in to BI 7.0. I can only see the hierarchy nodes in the RSH1 and in the reports as well for 0GLACCEXT.But I am not able to see the hierarchy nodes description like under Expenses > salaries , wages , housing etc .....only its GL accounts is displaying like 700100 , 700200
I also uploaded Text datasource ( 0GL_ACCOUNT_TEXT ) for 0GLACCEXT , the text is loading without any problem but the changes are not being reflected in the RSH1 and the reports.
Regards,
-NehaHi KP,
Thanks for your reply , the text for 0GL_ACCOUNT is displaying fine , I don't have any issues with 0GL_ACCOUNT , my main concern is I'm using Financial Statement item 0GLACCEXT for Balance Sheet and P&L Statement (for period accounting) by using Virtual Cube 0FIGL_VC1 the Text is not displaying in the reports as well as in RSH1 , where as for 0GL_ACCOUNT the hierarchies and text are working and displaying fine.
I'm closing this thread , the problem has been solved
it was related to mappings in Transfer rules.
Regards,
-Neha
Edited by: Nehabibo on Dec 18, 2010 11:46 AM
Edited by: Nehabibo on Dec 18, 2010 11:47 AM -
Welogic 9.2 jdbc connection pool monitoring section not displaying server
Welogic 9.2 managed jdbc connection pool monitoring section not displaying server name. Can you please let me know how can i achive this
Hi,
It happens if the Connectivity is Lost b/w DataBase & WLS Server...In that case in the WLS AdminConsole---DataSource---Monitoring Tab you wont see even the Testing Page with valid datasource to test it.
So please make sure that the N/W connectivity proper....One more thing you can try:
<h3><font color=red>Test-1</font></h3>
You can use *“weblogic.Admin”* utility to Enable and Disable the Pool (DataSource) Just to Confirm whether the dataSource is actually active or not::
Step1). run *"setWLSEnv.sh"* first in the same Shell prompt....then do the following:
Step2). To suspend:
java weblogic.Admin -url t3://localhost:7001 -username weblogic -password weblogic SUSPEND_POOL YourDataSourceName
Step3). To re-enable:
java weblogic.Admin -url t3://localhost:7001 -username weblogic -password weblogic RESUME_POOL YourDataSourceName
To test whether you are getting any Exception or Error while doing this....If yes u are getting any Error or exception then It means there May be some Database connectivity issue...
<h3><font color=red>Test-2</font></h3>
Please use the following Utility to Test the Database connectivity from your WLS Server box:
<font color=maroon>
java -classpath /opt/app/bea/weblogic92mp2/weblogic92/server/lib/weblogic.jar -Dbea.home=/opt/app/bea/weblogic92mp2 utils.dbping ORACLE_THIN DbUserName DBPassword somethingDbUrl.Something.net:1521:dbInstance
</font>
Syntax:
java -classpath /opt/app/bea/weblogic92mp2/weblogic92/server/lib/weblogic.jar -Dbea.home=/opt/app/bea/weblogic92mp2 utils.dbping ORACLE_THIN <DBUserName> <DBPassword> <DBURL>
The above utilty will test the DB Connectivity ...you need to run it from your WLS server Box...
<h3><font color=red>Another Simple Alternative of Test-2</font></h3>
http://jaysensharma.wordpress.com/2010/03/23/testing-datasource-status-using-wlst/
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here) -
MessageChoice does not display
I have created a tableLayout inside an existing seeded page, and inside that I've created a messageChoice. The messageChoice has a Picklist View Instance and Display and Value Attributes set, and the view instance is created and attached to a custom AM. The AM is attached to the tableLayout. There is a custom controller for the tableLayout region, which I have also specified on the container cellFormat for the messageChoice.
I have checked the vo -- it does return the rows I want when run in the BC4J tester. The rows are not for update -- just for populating the picklist.
The messageChoice does not display. I don't know why, I believe I've followed the directions in the dev guide. Perhaps one of you has an idea what might prevent this from coming up?
I did notice that even though the AM for the containing cellFormat item is my custom AM, when I look at the picklist under the debugger when executing the controller's processFormRequest, I find that the view object is attached to the page's AM, not the custom AM.
I also noticed that if I access the picklist as above, the "ViewUsageName" attribute is empty. I'm guessing that this is the root of the problem, but I don't know why it should be empty if the Picklist View Instance field is populated, nor do I know whether this is in fact the primary issue.
Do I have to do something in the root AM to make sure that my AM is instantiated? If so, can this be done somewhere declaratively? If not, at what point in the root AM code do I do that?
What else might I look at to ensure that my picklist is populated and renders?- how did you add this table layout to the seeded page ?
- you donot have to attach the controller twice once on the tableLayout and the cellformat ?
- what are you using the controller for ?
Picklist View Instance and Display and Value Attributes is enough to populate the picklist. The ViewUsagename and ViewAttributeName is used to push the user selected value back in to any given datasource. If the tableLayout has a AM then the custom AM will be automatically nested to the rootAM. -
View the .rtf file not display the data in BI Publisher Enterprise.
Hi,
Platform: OBIEE 10g in NT XPsp2
View the .rtf file not display the data in BI Publisher Enterprise.
Step 1, I created Answer-request, create .rtf file with Word and add the request name, Add bar chart and table, preview PDF is working fine with data, Upload this template to Answers, View Template from Answer is working fine with data.
Step 2, Answers – More Products > BI Publisher > My Folders > Create a new report > Edit > Data Model > New > Type: SQL Query > Data Source: Oracle BI EE > Query Builder > from SupplierSales assign Customer, Periods, Sales Facts (select Region, state, Year, Units Shipped) > Results > Save > Save
Click Layouts > New > enter Name ….. > Click Layouts > borrows .rtf file in Manage T file > Upload > Save > Click View
It is showing only the .rtf file without data. Why there is no data?
Please guide me to solve this issue.
Thanks,
JoThanks for you reply,
Our scenario is this report is basically a dissconnected mode report... we are developing these reports for mobile clients.
We dint face this kind of issue while developing other reports.
So please let us know if you have any idea on why we are facing this issue.
Regards,
Maneesh -
Strange scenario,Oracle can not display the data in mysql correctly
I use Heterogeneous Service+ODBC to achieve "oracle access mysql"(any other method?),and now i find Oracle can not display the data in mysql correctly:
-------mysql------------
mysql> create table tst(id int,name varchar(10));
Query OK, 0 rows affected (0.00 sec)
mysql> insert into tst values(1,'a');
Query OK, 1 row affected (0.00 sec)
mysql> select * from tst;
------------+
| id | name |
------------+
| 1 | a |
------------+
1 row in set (0.00 sec)
mysql> show create table tst\G
*************************** 1. row ***************************
Table: tst
Create Table: CREATE TABLE `tst` (
`id` int(11) DEFAULT NULL,
`name` varchar(10) DEFAULT NULL
) ENGINE=MyISAM DEFAULT CHARSET=utf8
1 row in set (0.00 sec)
-------------oracle ------------------
SQL> select count(*) from "tst"@mysql;
COUNT(*)
49
SQL> select * from "tst"@mysql;
id
1
SQL> desc "tst"@mysql;
Name Null? Type
id NUMBER(10)You can make the following query on the result page:
"select * from the_table where movietitle = ? and cinema = ?"
then you set movietitle and cinema to those which the user selected. If the resultset contains more than 0 rows, that means the movie is available.
Below is the sample code, it assumes you have a connection to the database:
PreparedStatement stat = myConnection.prepareStatement("select * from the_table where movietitle = ? and cinema = ?");
stat.setString(1, usersMovieTitleSelection);
stat.setString(2, usersCinemaSelection);
ResultSet res = stat.executeQuery();
if (res.next()) {
out.print("The movie is available");
} else {
out.print("The movie is not available");
}Now just add that to your JSP page. Enjoy ! =) -
Floating fields and fragment subforms in Outlook 2007 do not display correctly
I'm using LCES Forms 8.0 Update 1 to render a non-interactive HTML forms using dynamic content (customer info). The email appears ok in clients except in Outlook 2007.
The Floating text and Text Fields appear multiple times on the form (scattered around their placement point on the form) and the subform fragments are appearing with borders surrounding them.
I have heard that there are issues with Outlook 2007 not displaying HTML correctly. Is there a way to setup the Text Fields/Subforms in Designer so they display correctly in Outlook 2007?
Thanks!Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
Umlauts are not displayed correctly in different programs
Hello!
I live in germany, but my locale is set to "en_US.UTF8" because I like to have everything in english.
I do not have any problems with umlauts on the machine, but when I connect with sFTP oder Samba to it, the umlauts in files are not displayed correctly.
Look at this example
The upper word is how it looks in "ssh putty" (=locally on the machine), the bottom one is from "filezilla" (from my windows host)
This is my locale
locale
LANG=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC="en_US.UTF-8"
LC_TIME="en_US.UTF-8"
LC_COLLATE="en_US.UTF-8"
LC_MONETARY="en_US.UTF-8"
LC_MESSAGES="en_US.UTF-8"
LC_PAPER="en_US.UTF-8"
LC_NAME="en_US.UTF-8"
LC_ADDRESS="en_US.UTF-8"
LC_TELEPHONE="en_US.UTF-8"
LC_MEASUREMENT="en_US.UTF-8"
LC_IDENTIFICATION="en_US.UTF-8"
LC_ALL=
When I create a file "asd_aöü" locally on the machine (with the help of ssh - putty), it looks fine, but when I connect by samba or filezilla again the umlauts are not displayed correctly.
Do you understand my problem? What can I do?
Thanks!
Last edited by cyberius (2011-02-19 10:12:19)Did you check the locale settings on your Windows machine?
-
Pictures not displaying in non-thumbnail sizes
One of my clients has an iMac G5 running 10.4.11 and iPhoto 5.0.4. He's got about 3200 pictures in his iPhoto library which is about 12GB in size (they are all very large pictures). He's been using iPhoto without problem for years then suddenly he noticed that some pictures do not display in a slideshow. Out of the 3200 pictures he's narrowed it down so far to a few dozen pictures throughout his library. When we view the roll or the album with the pictures listed as thumbnails, we can see the picture just fine, but when we do anything that involves viewing at non-thumbnail size, such as double clicking on it or viewing in a slideshow it displays nothing. Slideshow just shows all black and double clicking on the thumb shows white with a spinning gear that never stops spinning. I rebuilt his library and that did not fix it. I repaired permissions, trashed iPhoto preferences, deleted tmp & cache files from his computer, I even zapped the PRAM out of desperation and nothing made any difference at all. One weird thing is that when it is siting at the white screen with spinning gear, if we resize the window smaller then resize it bigger, the picture will display properly but only for that time. It still will not display in slideshows.
I tried exporting one of the troublesome pictures out of iPhoto to his desktop, delete the pic from iPhoto, then try re-importing it again. This time when we try to import it, iPhoto gives an error that the file couldn't be imported because it may be an unrecognized file type or may not contain valid data. I can open the pic on his desktop using Preview and Photoshop with no problems at all.
Why am I posting this in the iPhoto '08 forum? well I copied the file to my MacBook Pro running 10.5.6 and iPhoto '08 and it almost does the same thing. I am able to import the file into iPhoto '08 and I can see the thumbnail but when I double click it, instead of a white screen with the spinning gear, i get a black screen and nothing else. I tried the trick of resizing the window and as I'm resizing, I do see a blocky image but as soon as I stop resizing the image goes black.
I can open the file in any program on multiple computers: Photoshop, Preview, GraphicConverter, ColorSync Util, Safari, Firefox, etc. iPhoto version 5 and '08 (the only versions I have handy) refuse to work with the file. I've even edited the picture in photoshop by changing the resolution by just a few pixels and slightly tighter jpg compression but iPhoto still refuses to play nice with it.
I have exhausted all options other than reinstalling the OS, but other posts I've read similar to this say that never fixes it. I am at a loss. What is wrong with iPhoto that it refuses to play nicely with pictures that work everywhere else in the world?
I forgot to add that in Console there are several instances of iPhoto errors:
"have info and image but no ciimage" and “have info and image but no ref”
Message was edited by: Clint McintoshClint:
Try opening the file in one of the other applications that can use it and save as a new file and see if that new file is compatible with iPhoto. Or you might try this Automator workflow, Convert to JPG and Embed sRGB profile, on one and see if the resulting file will work. If so you can batch change all of them. It replaces the file you run it on so be sure to run it on a copy just to be safe. You can download it from Toad's Cellar or download it immediately with this link: Convert to JPG and Embed sRGB profile.zip.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: iPhoto 8's new option in it's rebuild library window, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.
Maybe you are looking for
-
I have a red usb error message with a ! octogon,
it keeps reappearing in multiple boxes over any screen and it says " because a usb device was drawing too much power from your computer, one or more of your usb devices have been disables. I click ok and new boxes reappear...I plugged in my HTC EVO p
-
Battey wont charge and I cant figure out how to reset my i pod.
If any one can help me. Im new to Mac and Ipods. my I pod worked earlier today and then it shows the apple support sad face and the flashes to a battery with a lighting bolt. I have tried to reset it with the support page info but I am totally stuck
-
How to get users to start with the first episode?
I checked my stats today and found that the most recent episode of my podcast is the one the has been hit waaay more than any of the others. But I'd really prefer listeners hit the first episode first. Do other podcasters find this? Is it worth re-or
-
Firefox will crash while I am using the internet...no warning, no apparent reason...just an apology for the crash. Why? Today, when using an Adobe application Firefox did not recognize or allow the website to recognize that "cookies" WERE enabled. I
-
I updated my iphone to the latest version then suddenly it is required me to connected to the iTunes! i need my data but, there is only restore button.