Datasource not visible in rsa1
Hello,
my datasources are not visible in rsa1 -> source systems.
I tried replicate, check connection, repair connection, run report RSAOS_METADATA_UPLOAD, upload metadata, etc.
Now I have no clue.
In roosource datasourse is active (in sourcesystem).
Any idea?
Wow!! I loved the way it works :).
I was trying all sorts of things to find out where did my datasource go. then i stumbled upon your recommendation Yogesh. And it did work. everything appeared perfect after i logged off n then login.
Thanks a lot Yogesh.
next time when I get a weird error the first thing i'm goin to do is to log off.
Similar Messages
-
IO is active in BC but not visible in RSA1
I have installed one IO '0PO_NUMBER' from Business Content
and have saved in local object.Following way I installed the
infoobject,in the right hand pane its showing active but its not
visible in RSA1.
Steps
1. Dragged the perticular IO-PO_NUMBER to the right pane and dropped there.
2. Grouping - In data flow before
3. Collect - Automatically
4. Install - Install
Now IO is avtive in BC -right pane where we used to drag and drop the IOs.But in RSA1 its not found.
Could somebody tell me why its not found ?Hi BI Experts,
The standard IO that I have installed successfully form
Business Content is showing active but its not visible in
BW system.
Then again,I have deleted the IO form RSD1 and installed
it and got the same result as it was before.
Your suggestions are welcome.
Apart form this,Please tell me how to find inactive IOs in
BW system.
Thanks -
Some of the Master Data Attributes DataSources not visible in RSA5
Hi Experts,
After installation of R/3 ECC 5, some of the master data attributes datasources are not visible in RSA5.
Do i need to do any other settings to get them.
Awaiting response....
Thanks in advance.....
RafiHi Prakash,
Thanks for quick response. I have checked those tables. i found that i have same datasources as it is in RSA5.
For example: i have 0SALE_DIST_TEXT in both RSA5 and ROOSOURCE, how i can have the attributes for the same.
also i don't have attributes datasource for Customer Group1...5, Material Group1...5, sales office etc.,
Anticipating your response,
Thanks
Rafi -
DataSource is saved, but not visible in BW under the node NODESNOTCONNECTED
When activating a datasource, I received the following message:
Message no. R8418
Diagnosis
You tried to assign a DataSource to the application component DM. This application component is, however, not entered in the RODSAPPL table as an application component.
System Response
The DataSource is saved, but is not visible in BW under the node NODESNOTCONNECTED.
Does anyone know a work around for this?
Thank you.Hi,
you are missing Application Component Hierarchy in your BW System which is stored in tables called RODSAPPL and RODSAPPLT (for the texts).
First try to replicate the DataSources/Component Hierarchy from the Source System.
Goto RSA1 -> Source Systems -> Replicate DataSources
Goto DataSources again and try to activate.
Take also a look:
534894 - Replication of application components and DataSources to BW
350024 - BW-OLTP-APCO: Frequently asked questions (FAQ)
Hope this helps.
Regards
Andreas -
Enhanced field was not visible in DataSource
Hi ,
I Enhanced one field to DataSource, But it is not visible in that datasource.
T
he procedure which i followed is:
RSA6 -> Select DataSource -> Click on "Enhance Exctract Structure" -> It will show Append Structure -> Continue -> Add filed -> Activate + Back
When i checked again the same datasource it is not showing the appended field.
Can any one suggest me, wht can i do now to see that Added filed to DataSource.
Thanks and Regards
RajeshHi Rajesh,
go to LBWE Lo cockpit there u find the Datasource click on the link there u find the appended field is marked as Hide and Field only Check boxes u can un mark the Hide check box and activate the data source u find the appended field.
i hope this will help u
Thanks & Regards,
Ramesh -
Not visible infoobjects in RSA1
Hi Experts
The infoobjects i activate does not show in RSA1 in the folder infoobjects. I can see them under infosource and some of them under infoprovider in RSA1. Why cantt I see them in the infoobject tree?
Kind regards
Erik1) If they are time characteristics check in RSD1..
Otherwise, try to relogin or use Search functionality and try again..
Regards,
Hari -
Application Components not visible in SAP R/3 tree
Dear All,
We have standalone system and we have installed ECC 6.0 with BI Content. Harddisk is 320 GB with 2 GB RAM. We want to extract the data from R/3 to BW which are on the same system (As ECC 6.0 contains builtin BW).
In RSA1 the application components are not visible in the SAP R/3 tree under datasource tab. When I am replicating the entire SAP data source it is giving shortdump(STORAGE_PARAMETERS_WRONG_SET).
How can I replicate a particular data source to avoid the memory problems because I have only 2 GB RAM.You can also Replicate a single datasource w/o replicating the App Comp using a FM.
BW
SE37
RSAOS_METADATA_UPLOAD
Execute
Give Source System n Datasource - Execute
*Give Datasource Name - for I_O... & Source System for Logsys. -
Print button is not visible in RDLC report
hi
I am developing web application in Visual studio 2012 ,.net framework 4.5,C#.net
I have designed RDLC report for web application,in report viewer i have given showprint button = true, in browser print is not visible in all the browser.
How should i give Email functionality in report,is there any sample code for email.
How to overcome the above two problems,print and Email
<rsweb:ReportViewer ID="ReportViewer1" runat="server" Font-Names="Verdana" Font-Size="8pt"
InteractiveDeviceInfos="(Collection)" WaitMessageFont-Names="Verdana" WaitMessageFont-Size="14pt"
BackColor="#CCCCFF" ShowPrintButton="true" ShowPageNavigationControls="True"
ShowBackButton="True" ShowCredentialPrompts="True" ShowDocumentMapButton="True" ShowExportControls="True"
ShowFindControls="True" ShowParameterPrompts="True" ShowPromptAreaButton="True" ShowRefreshButton="True" ShowZoomControl="True" >
<LocalReport ReportPath="Report1.rdlc" >
<DataSources>
<rsweb:ReportDataSource />
</DataSources>
</LocalReport >
</rsweb:ReportViewer>
Thanks&Regards,
RadhikaHi Om Prakasah,
If I understanding correctly, you created a ReportViewer report, but you can’t see print icon when you run the report in browser. If so, please follow these steps:
If you can’t see the print icon either when running the report in visual studio, you may have set ShowPrintButton to False in Properties window, then please set it to True.
If there is print icon in visual studio but not in browser, please update the .NET Framework on your web server to the latest version, because the print icon is by default hidden in some version of browser. For more information, you can refer to the relevant
link below:
http://blogs.msdn.com/b/selvar/archive/2013/12/20/reportviewer-2012-control-not-showing-print-icon-when-viewed-from-ie-11-desktop-mode.aspx
If the problem is not resolved, i would appreciate it if you could give us detailed description of your problem, it’s better to provide the version of ReportViewer and browser, it will help us move more quickly toward a solution.
Thanks,
Wendy Fu -
Default values for static report parameters are not visible when scheduling
Hello
Crystal Reports 2008 Dev
Crystal Reports Server 2008
When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
I have published in the following 3 ways:
Publishing Wizard
File > Save As > Enterprise from withing Crystal Reports Dev
CMC > Folders > Add > Crystal Reports
The results are the same for each method of publishing.
To try to eliminate any DB issues etc i have created a report that is not attached to a datasource.
This test report has one Static parameter.
I have set 3 values for its list: Entry A, Entry B, Entry C
Entry X is set as the parameter Default Value
The parameter is placed in the details section of the report
When the report is Viewed it will prompt for parameter entry, with the default value present
When I try to schedule the report is will not have an entry for its parameter
It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
Is this a config problem that i have ?
Can anyone help me with this ?
Best regards
Patrick Coote
Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AMHi Robert
Thanks for the reply and apologies for not responding sooner.
What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
Although this is a bit clumsy, it is sufficient for now
Best regards
Patrick -
Customized fields Not visible in GUI but visible in PCUI why
Hi,
Can anybody help me, i have a problem which is as followes,
I Enhanced Three fields for Campign in CRM Throw EEWB, these three fields are not appearing in GUI but its appearing in PCUI.
Can some body can give me valueble inputs to solve this issue.
Thanks & Regards,
Sivakumar.Hi Suyash
In the TS, on the right side, see if these fields are part of the DS.
If yes, then click on them and drop them on the left, in the Transfer structure.
If they are not availabel in the Datasource, then go to RSA6 in R/3 and see if the extract structure of this DS has these fields hidden, i.e if theres a check mark on hide coloumn....
If these fields are not visible in the extract structure then let me know
Regards
Prakash
Assigning points on SDN is a way of saying thanks !! -
Application not visible in 9.3.1
hi All,
I have successfully created a database(ms-sql) and configured it.on top of it i have created an application successfully.but when i try to login that app thru planning web or workspace its not visible there.can anyone tell me what is the cause for this.
thanks in advanceIf you are going direct to planning and not seeing the app in the dropdown then it may be down to having created multiple instances in the config utility, if that is the case you will need to associate the datasource with the active instance - http://download.oracle.com/docs/cd/E10530_01/doc/epm.931/html_hp_admin/ch02s10s04.html
Cheers
John
http://john-goodwin.blogspot.com/ -
Infocubes are not visible in $INFOCUBE Folder in Universe Designer
Hi, Queries are seen and accessible but Infocubes are not seen $INFOCUBE Folder in Universe designer. Please let me know what might be the problem and please suggest the solution.
Environment: SAP BI 7.1, BO Edge3.0.
Thanks in advance.Hi
When opening BW infocubes from crystal reports we have problem:
In se37 ; we executed BAPI function BAPI_MDPROVIDER_GET_CUBES
- put in as the CATALOG $INFOCUBE.
when we did the above steps. i got this message "201No InfoProvider exists with name "YN_SUBFAM". adn there are around 350 entries.
But infocubes are not visible in $INFOCUBE Folder in the crystal reports. Is it bug? how can we resolve this issue. all infocube are active in rsa1.
Please help us -
ZPRS- Cost(data source H) condition type is not visible in CRM sales order
Hi Colleagues,
I created a sales order in ERP. In the sales order the condition type ZPRS- Cost(data source H) is available. I downloaded the this sales order to CRM i can able to see the ZPRS condition type in sales order.
But when i create a new sales order with the same data (BP, Material,Sales organization) the condition ZPRS is not visible in the sales order. When i checked the PRC_TRACE it is showing the error as "Condition with external datasource has not be found".
Can any body help me in this issue.
Tanks and Best Regards,
RajeswariHi Michael ,
Thank you very much for your answer. I just require one more confirmation from you.
Could you please confirm If we post a returns document in CRM system directly the "ZPRS or VPRS - Cost" Condition type will not appear in the return document condition types.
Untill and unless it is a billing document in CRM system the "cost" condtion wont appear rt?
Could you please confirm it.
Thanks in advance for your help.
Best Regards,
Rajeswari -
Fields not visible after replication ?(hide tick removed)
Hi experts,
I have added fields from LO communication structure to extract structure and i have removed the Hide option in maintain datasource.When i am replicating in BI those fields are not visible.What is the reason?
I am eagerly waiting for reply.
Regards,
lapHi Lap,
U can delete the data source in RSA6, u can activate again from RSA5,
Here u dont need to do any setup tables, u will get the enhanced fields with Hide Mark,
U have to remove the Hide tick and Replicate ..
U will get the added fields in BI then u map the transformation
I have done this once It works fine
Assign points if it Helpful to you,
I appreciate Geo quick Response..
Regards,
SHAIK -
Servers not visible in admin console
Hello,
we have admin server and one managed server (soa_server1) up and running, but for some reason they are not visible in admin console Environment -> Servers. The list is empty...
Any idea why admin console cannot see these servers?
Can this be fixed any other way than recreating the domain?
As a consequence jdbc datasource cannot be created. Testing the database connection succeeds but after that setting the target cannot be done.
We have weblogic 10.3.3.
regards, MattiHello,
we rebooted the RedHat EL5 machine we have weblogic installed, after reboot Servers are visible as they should and datasource targeting for soa server succeeds.
In the same machine there's Oracle SOA Suite 11g in one domain (AdminServer, soa_server1), and Oracle Service Bus in another domain. It is a mystery why things did not work before reboot.
Thank you for the ideas how to debug and fix the problem.
regards, Matti
Maybe you are looking for
-
Ipod Nano previously on Windows, want to use on a Mac now
Is it possible to use a previously used Nano from a Windows PC to my new Macbook?
-
I have installed the trial ABAP version from a disc I got with a purchased book but do not have the main components of SAP for me to work on. I would like to work on modules such as PP/MM/SD but have no business modules available. Is there somewhere
-
Portege R500 - I loose settings in Fingerprint software
Hi, I use fingerprint software, but sometimes, I lost my settings and Password Bank and user fingers are clear. I must import last settings and then working well. I lost my settings 2 or 3 times at week! Do you have any idea? Thanks
-
Coordinate system for StackPane
Hi, I have a task to implement a selection tool - click the mouse to draw connected poligon. But I can not find a connection between the coordinate system and screen pixels. When I try to draw a line as Line.setStartX (xx), Line.setEndX (yy), the lin
-
Flash .swf plays fine in Dreamweaver Not online
Hi there. I have placed a .swf file in a table and it plays fine in Dreamweaver. When I upload it to the ftp it doesn't play online! Any ideas?? Thank you in advance! V