Datasource:Real time enabled

Hello everybody,
Hope to have your valuable suggestions on this
1:Is it possible for me to copy a standard FI datasource .I need to have 0FI_AR_4 ,which is currently active and in use ,datasource real time enabled
2:I do not want to go to roosource table and modify the table to make this real time enabled.Is it possible for me to create a new datasource(not generic since i would have to create view/query etc) copying this 0fi_ar_4 and have it real time enabled
3:I tried RSDS transaction.however its not helping me to copy or create
regards
savi

Andreas/Michael,
I would like to add a different dimension to this topic mentioned by you.
Please do correct if wrong.
Problem -
The FI line item delta DataSources can identify new and changed data only to the day because the source tables only contain the CPU date and not the time as time characteristic for the change.
This results in a safety interval of at least one day.
and thats why we cannot enable this datasource as Real Time;however please refer this note below and help me understand how would this fit the aforementioned bill.
Note 485958 - BCT-FI: Extracting FI line items up to the current date
Solution
Due to a customized setting, it is now possible for the FI line item extractors to read the data up to the current date during the delta runs.
During the next delta run, the data is then read again from the day when the previous extraction was called, up to the current day of the call for the new extraction.This means that the delta extraction of the data always occurs with time intervals overlapping by one day.
The delta calculation by the ODS objects ensures that the repeatedly extracted data does not cause duplicate values in the InfoCube.
Hope it Helps
Chetan
@CP...

Similar Messages

Real-Time Enabled field and Generic extarctor

Hey,
We are using PI 2004_1_470 on our R/3 system, and I just noticed that there is a field called Real-Time Enabled on the generic delta screen. This maps to ROOSOURCE-REALTIME.
What is the field being used is? Is this some early release of the near real time function that will be part of BW 7.0, or can I use this with BW 3.5?
Thanks Bill!

Hi Mickey,
in general:
1.) you need a 7.0 DataSource (3.X DataSources cannot deliver Real-Time information)
2.) you can only run a DataSource in one mode, either "Real-Time Data Acquistion" or "Standard", i.e. the same DataSource cannot be incorporated in the data flow in different modes.
3.) Business Content DataSources are not delivered with the option "Real-Time Data Acquistion" at the current point in time. We are currently discussing which DataSources should be made available to start off with.
If you have specific scenario in mind, please contact your Ramp-Up Coach in order to direct support by us.
Cheers
SAP NetWeaver2004s Ramp-Up BI Back Office

Real time data aquisation(RDA)

hi
if i want use datasource for RDA , its support in r/3 side? so its wont support for flat file?
where can i check the data source will support for RDA or not?
once datasource replicated while creating infopackage need to check check box and dtp need to check RDA

goto SAP system
goto transaction SE16
give ROOSOURCE in Table and execute.
in the next screen give ur DATASOURCE name and execute.
this will give the datsource settings check the realtime field if its checked then ur datasource is real time enabled.
else u can enable it by writing a small program.
goto se38
cerate an executable program with the following code
Tables : ROOSOURCE.
Parameters : P_OLTPSR LIKE ROOSOURCE-OLTPSOURCE.
UPDATE ROOSOURCE set REALTIME = 'X'
WHERE OLPTSOURCE = P_OLTPSR
and OBJVERS = 'A'.
When u execute this program it asks for datasource name , give ur datasource name and execute. it will real time enabled.
u can again check it in SE16.
hope this helps.

The problem with Real-Time Data Acqusutuin

Hi , all
I created ds with Generic Delta : Delta-Specific Fields pointed time stamp and in settings checked Real-time Enabl . After that created modeling in BW , made initial update like discribed in SAP Documentation , created one more infopackage with adapter :Real-time extraction from sap , assigned infopackage and dtp to daemon and started job of daemon .
Request stay yellow all of time and dosn't bring no one records of changes in R3 . Anybody know what is the couse for that? Maby I forgot to check something anywhere or star trigger anyone!?

The following setup working fine for me
In R/3 for Generic Delta ---
        Filed Name - AEDTM
        0Calday -- Radio Button - 'ON'
        Upper Limit - 0
        Lower Limit - 2
        Real_Time enabl - Check Box - 'ON'
        New Status for changed records - Radio Button - 'ON'
In BI
    Create infopackage (init) for replicated datasource
    Execute the DTP to load this init data to DSO.
    Do NOT activate DSO
    Now create another Infopack (real_time Enable & ) and create real-time DTP.
In RSRDA
    Create a Daemon
    Assign InfoPack & DTP to Daemon.
    Now start daemon...Here the message says something like 'one of the request is not activated'.
    Now, select DTP under Daemon --> use menu Edit --> Repair Chain --> Execute
    (If repair chain is not yet there then Daemon --> use menu Edit --> Repair Chain --> Generate and
     once this is done execute the using the above path). Once the chain finishs
    Now start Daemon and refresh.
    Now u can see, an open request (yellow) under infopackage.
    As soon as the new records gets load into PSA, then an open request starts under DTP.
    (Note: If no new data available in PSA, no open request starts under DTP)
Also note that, RDA requests (in PSA & DSO Manage) should always be in yellow, that means Real-Time Aquisition is working.

Cannot check real time access while creating infopackge

Hi all,
I am getting an error while trying to create a real time infopackage. I have made my datasource real time by changing the real time flag in ROOSOURCE but while creating the infopackage the real time check is greyed out.
I had read in some other message in SDN that you can make non-real time DS into real time by changing the flag in ROOSOURCE any ideas.
Also we are in content 7.0.3 and I dont see any business content either in ECC or BI in ROOSOURCE table with real-time flag marked X. Does SAP delivery any content which are real time or am I missing something here?
thanks for your input

Hi Raj,
You can create the Real-Time infopackage only after creating the info-package for Init Load. The check box for Real-Time is not enabled if Initialization load is not run. Though this check has to be made only after creating the Real-Time Datasource correctly.
Go to RSO2, enter the datasource name, and open it in edit mode. Then choose the option 'generic delta'. Give the field on which you want the Delta pointer to be set (The field you want to enter here should NOT be hidden from SAP BW). Importantly, check the option 'Real-Time Enabl'. save the datasource. It becomes Realtime. Replicate the datasource.
Hope this helps.
Thanks,
Praneeth.

Real Time on FI-GL

Hi Friends
We have fi-gl and ec-pca data loads currently with period selection full loads .
Business wanted the real time data for their reporting. Our businessdont close the posting periods. They still do postings for 2008 periods and postings happens around the clock over the month end.
We have checked direct access but didn't work.
Is RDA (real time acquicition) works with FI-GL models? I know RDA doesn't work for 0FI_GL_4 datasource.
Is it possible with generic delta method by conatenating cpudt and cputm from bkpf table and use timestamp as a delta enable field?
Please your quick response will be appreciated..
Regards,
Chandu.

The answer for your question on how to find if a data source is RDA
enabled is given below .
Use SE16 to browse the details of your datasources in ROOSOURCE table
If the 'Real-Time Enabl' shows an 'X'it means your datasources are real-
time compatible
See this link .
http://help.sap.com/saphelp_nw2004s/helpdata/
en/52/777e403566c65de10000000a155106/frameset.htm
But if the data source is not real time enabled then you cannot see
that option in the DTP .
SAP has not released the FI-GL datasources with RDA feature, if you
check the delievered version of the FI-GL datasources you will see
that the flag 'Realtime-enabled' is missing. No date has been set yet
for when these datasources will be RDA enabled.
2:
If you really need to use the RDA functionality with the FL-GL
datasources you can use the following workaround:
A: In the table ROOSOURCE set the Flag 'Realtime' to 'X' for
the datasource you want to RDA enable.
To set the RDA flag for the datasource you can use a program like
the following:
REPORT Z_RDA_FLAG.
DATA: ROOSOURCE.
Update ROOSOURCE set REALTIME = 'X'
where OLTPSOURCE = 'put the name of the datasource here'
and OBJVERS = 'A'.
B. Replicate the DataSource into BW
C. Create a DSO Object
D. Migrate the DataSource (right mouse on DataSource in RSA1 DataSource
   overview)
E. Create transformation.
F. Create DTP of type 'Realtime'
G. Create InfoPackage for Init-Simulation (Delta-init load without data
transfer) and trigger the Request for the data load
H. Create another InfoPackage for Realtime data acquisition
I. Create a demon directly from InfoPackage maintenance or via
   transaction RSRDA. Assign DataSource and Realtime DTP to demon. Start
   demon; upload period is 1 minute.
3: The steps in point 2 above is a workaround so we do not support it as
   it is not part of SAP standard functionality.However if you test this
   carefully in your DEV and QA environments you should find that the
   Process works.
PLEASE PAY ATTENTION TO THE FOLLOWING INFORMATION REGARDING RDA:
1. RDA can only be used for completely new scenarios! The reason is that
you need a DataSource of the 7.0 type, not of 3.x type. Since you
migrate a 3.x DataSource into a 7.0 DataSources, the existing transfer
rules and mapping between DataSources and InfoSources are lost (deleted)
or archived. It can destroy your existing scenario. Please be very
cautious and use the Realtime Data Acquisition functionality on a
complete new scenario. Make sure that the DataSource in question you
would like to migrate or to replicate as a 7.0 DataSource, is not
used for other Data targets in your BW system!
2. Be aware of the fact that as soon as you decide to use RDA method,
you cannot load delta via the 'usual' delta upload for the same
scenario anymore. It is not possible to switch between RDA demon usage
and a non-RDA delta loads in the same data flow.
At the moment, no Content-delivered DataSources can be used for RDA
in Standard because the flag 'Realtime-enabled' is missing in the
delivered version. You'd better to wait for 'Realtime' Flag delivering
in DataSource standard done by the corresponding application.
regards,
Colin Moloney

RDA(real time data aquasation)

can anyone pl. tel me how the process goes in RDA(real time data Aquasation) means no steps internally.

Hi,
Real-Time Data Acquisition u2013BI 2004
Real-time data acquisition supports tactical decision-making. It also supports operational reporting by allowing you to send data to the delta queue or PSA table in real-time.
You might be having complex reports in your BI System, which helps in making decisions on the basis of data of your transactional system. Sometimes (quarter closure, month end, year ending...) single change in the transactional data can change your decision, and its very important to consider each record of transactional data of the company at the same time in BI system as it gets updated in the transactional system.
Using new functionality of Real-time Data Acquisition (RDA) with the Net Weaver BI 2004s system we can now load transactional data into SAP BI system every single minute. If your business is demanding real-time data in SAP BI, you should start exploring RDA.
The source system for RDA could be SAP System or it could be any non-SAP system. SAP is providing most of the Standard Data Sources as real-time enabled.
The other alternative for RDA is Web Services, even though Web Services are referred for non-SAP systems, but for testing purpose here I am implementing Web Service (RFC) in SAP source system.
Eg will be a production line where business wants information regarding defective products in the real time so that production can be stopped before more defective goods are produced.
In the source system, the BI Service API has at least the version Plug-In-Basis 2005.1 or for 4.6C source systems Plug-In 2004.1 SP10.
Refer:
Real-Time Data Acquisition -BI@2004s
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/230d95df-0801-0010-4abb-ace1b3d197fd
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f80a3f6a983ee4e10000000a1553f7/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/230d95df-0801-0010-4abb-ace1b3d197fd
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3db14666-0901-0010-99bd-c14a93493e9c
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3cf6a212-0b01-0010-8e8b-fc3dc8e0f5f7
http://help.sap.com/saphelp_nw04s/helpdata/en/52/777e403566c65de10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/webinar?rid=/library/uuid/230d95df-0801-0010-4abb-ace1b3d197fd
Regards
Tg

Real-Time Data Acquisition

WHAT IS REAL-TIME DATA ACQUISITION AND
WHAT ARE REAL TIME QUERIES AND
DEAMON UPDATE AND HOW DO WE EXTRACT AND LOAD DATA
Please Explain in detail.....
regards
GURU

Hi,
Real-Time Data Acquisition BI 2004s
Real-time data acquisition supports tactical decision-making. It also supports operational reporting by allowing you to send data to the delta queue or PSA table in real-time.
You might be having complex reports in your BI System, which helps in making decisions on the basis of data of your transactional system. Sometimes (quarter closure, month end, year ending...) single change in the transactional data can change your decision, and its very important to consider each record of transactional data of the company at the same time in BI system as it gets updated in the transactional system.
Using new functionality of Real-time Data Acquisition (RDA) with the Net Weaver BI 2004s system we can now load transactional data into SAP BI system every single minute. If your business is demanding real-time data in SAP BI, you should start exploring RDA.
The source system for RDA could be SAP System or it could be any non-SAP system. SAP is providing most of the Standard Data Sources as real-time enabled.
The other alternative for RDA is Web Services, even though Web Services are referred for non-SAP systems, but for testing purpose here I am implementing Web Service (RFC) in SAP source system.
Eg will be a production line where business wants information regarding defective products in the real time so that production can be stopped before more defective goods are produced.
In the source system, the BI Service API has at least the version Plug-In-Basis 2005.1 or for 4.6C source systems Plug-In 2004.1 SP10.
Real-Time Data Acquisition -BI@2004s
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/f80a3f6a983ee4e10000000a1553f7/content.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/230d95df-0801-0010-4abb-ace1b3d197fd
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3db14666-0901-0010-99bd-c14a93493e9c
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3cf6a212-0b01-0010-8e8b-fc3dc8e0f5f7
http://help.sap.com/saphelp_nw04s/helpdata/en/52/777e403566c65de10000000a155106/content.htm
https://www.sdn.sap.com/irj/sdn/webinar?rid=/library/uuid/230d95df-0801-0010-4abb-ace1b3d197fd
Thanks,
JituK

Real-time data acquisition for HR datasources

Dear Experts,
I have a couple of questions on real-time data acquisition...
a) Can you tell me if any standard HR datasources support real-time data acquisition?
b) Can we apply real-time data acquisition for generic datasources? If yes, is there any difference in the process compared to working with business content datasources when using real-time data acquisition?
Hope you can provide some answers...as always, points will be awarded for answers that effectively address the questions.
Thanks a bunch.
K

Hi Karthik,
a)The decision to go for SAP remote cube depends on the volume of data and the frequency of queries. It is advicible not to use the SAP remote cube if the data volume is high and also, the query frequency is high. Which module in HR are yuo implementing? In HR, the data volume is generally high. So, if you go for loading the data from R/3 every 3 hours, you are asfe as long as the loading volumes are less. For example, for implementing Time management, I would not advice frequent loads as it is time consuming process. So, make a decision based on the above mentioned lines. If the data volume is not high, I would prefer the SAP ermote cube as it will reduce managing the loads.
b)I mentioned FM extractor just for the sake of control of data selection. You can even go for view/table extractor.
Hope this helps.
Thanks and Regards
Subray Hegde

Enabling the Active Dataguard and Real Time Apply

11.2.0.2 on AIX
I gather that , to enable Active Dataguard, you need to execute
STARTUP ; ----not startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;The above commands will enable both Active Dataguard (Real Time QUERY) and Real Time Apply. Right?
To enable just 'Real Time Apply' , I need to
startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;Am I right ?
Question on 'WITH SESSION SHUTDOWN' clause
While googling I've come across the following variant with an additonal 'WITH SESSION SHUTDOWN' clause
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE WITH SESSION SHUTDOWN;What difference does this clause bring ?
Is this claused used to enable Active Dataguard feature or 'Real Time Apply' or both ?

I gather that , to enable Active Dataguard, you need to execute
STARTUP ; ----not startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;
The above commands will enable both Active Dataguard (Real Time QUERY) and Real Time Apply. Right? Yes, It will be in both recovery / realtime + Read only mode, Also you can use
To enable just 'Real Time Apply' , I need to
startup mount
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT;Am I right ?Yes. It will be in just recovery/real time mode.
Question on 'WITH SESSION SHUTDOWN' clause
While googling I've come across the following variant with an additonal 'WITH SESSION SHUTDOWN' clause
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE WITH SESSION SHUTDOWN;What difference does this clause bring ?
Is this claused used to enable Active Dataguard feature or 'Real Time Apply' or both ?It has multiple options based on startup type
For this example check link of Julian Dyke.
http://juliandyke.wordpress.com/2010/10/14/oracle-11gr2-active-data-guard/

Liquid Analytics enables the sales force in real-time

Problem
The success of wholesale and manufacturing distribution operations largely hinges on the efficacy of sales teams that must deal with a host of pricing and product challenges. For the sales group, the biggest game changer is their ability to access and leverage insight into the customer’s behavior and historical buying patterns.
Due to the technological limitations of the past, the sales team was unable to access information about customers’ buying patterns, leverage new products, establish dynamic pricing, and set realistic goals and as a result would miss opportunities with customers or lose their faith altogether.
Even with these pressing needs noted and observed, not just any technology can be introduced to a sales team and expect to be adopted. This is because the unique characteristics of the sales force must be carefully considered in order to seamlessly integrate new technologies aimed at sales enablement.
Liquid analytics understands the field and the interplay between marketers, sales teams, and customers and uses this knowledge to inform its technology. The firm understands that the sales force operates primarily in the field and therefore does not have the capability to manually input data into sales tracking forms, or that sales teams with different products visit the same customers but do not necessarily work in tandem to leverage each other’s footprints. Without a foolproof means of measurement and assessment in the field, the disconnect between the sales and marketing teams is often heightened making set goals unrealistic for sale representatives.
Solution
Liquid analytics uses its understanding of the sales archetype and big data and predictive analytics to bring viability to its target industries when it counts most. The proprietary technology takes predictive algorithms and mobile tracking, visualizing the various components in a comprehensive, easy-to-use dashboard. For mobile sales representatives, valuable information can be easily searched on an account, and sales activity is easily logged to demonstrate ROI.
For wine and liquor sales representatives, the solution has been proven to do a number of things:
The technology uses algorithms based on history of sales which are able to forecast what will be needed and allows the sales team to make fact- based orders, save time on each customer account by avoiding duplication, and increase customer loyalty. In addition, access to inventory in real time allows the sales rep to deliver in a timely manner and avoid missed shipments by 95 percent.
The Liquid analytics dashboard allows representatives selling liquor, wine or beer to view one universal dashboard to note what sales tasks have yet to be done or have been completed and develop a workflow that collectively benefits all representatives on the account.
The leaderboard creates a gamification experience for the sales team meant to increase sales by incentivizing through potential conversion rates and goal reward system.
On an individual basis, representatives are able to log their hours and use the record to negotiate better terms. Logged hours also provide context as to whether a representative is spending too much time while profitability remains low, leading to new sales strategies.
The feedback loop between the marketing and sales team is closed as the solution generates real-time notifications about where media is used by sales team as well as categorizes product attributes that can be used for better product placement and targeted campaigns.
Watch the Video
Join the conversation and follow us on twitter @SAPstartups #HANAusecases.

Thanks for this pointer.
I followed this link and enabled 0fi_gl_4 for real time reporting in R/3
What do I do now in BW side I already have a infsource that I am updating a DSO/ODS in BW. What do I need to do in BW side to ensure that the data in R/3 will flow through to BW.
Thanks
Karen

Real time flag enable

Hi Experts,
I want to load data from 2LIS_11_VAKON with real time functionality. I made the real time flag enable in data source in r/3 side but while creating the info package in bi the real time flag is not showing. Could s'one please help me if i'm missing any steps.
Brisk reply can be appreciated.
Regards,
Amar

Hi Ram,
I think that you are loading data from generic data source if it is the case you can flag the "Real time " option while creating the generic data source> Generic delta>Realtime. Then you can replicate this DS into BI then create info pcakage for this DS and select the option "Real time" flag.
Hope this helps and solve your problem.
Thanks & Regards,
Amarnath

Real Time datasources

Few questions regarding REAL TIME datasources -
1)How can we identify what datasources are REAL TIME datasources in R/3?
2)Can any standard datasources be converted to REAL TIME datasources.
If yes ,what are the steps in details?
3)Why only ODS is used to load for REAL TIME datasources and not INFOCUBES.
4)Can generic datasources be built as REAL TIME datasources.

Hi,
please see my answers underneath the respective question.
1)How can we identify what datasources are REAL TIME datasources in R/3?
==> field REALTIME in table ROOSOURCE
2)Can any standard datasources be converted to REAL TIME datasources.
If yes ,what are the steps in details?
==> Yes, if the extractor can provide Real-Time data, i.e. at every point in time delta information. A negative example are FI-GL extractors which are only capable to provide data on a daily basis.
If you identify such a DataSource and the DataSource is critical to your project success, please contact me directly via EMail.
Proceeding is as follows (SPS8 is recommended):
a.) Set field ROOSOURCE-REALTIME for respective DataSource (per customer ABAP report)
b.) Replicate DataSource
c.) Create DeltaInit InfoPackage and execute
d.) Create Transformation and DTP to a DataStore Object (if applicable)
e.) Create a daemon in Real-Time Monitor (Transaction RSRDA)
f.) Locate your DataSource in the 'Not assigned' part of the tree structure
g.) Assign InfoPackage and DTP to daeomon (via context menu on the DataSource)
h.) Start the daemon
3)Why only ODS is used to load for REAL TIME datasources and not INFOCUBES.
==> Since data is immediately available for reporting and we have an open request we have a specific update processing for the data target (with a special DTP). This has currently only been implemented for DataStore Object.
4)Can generic datasources be built as REAL TIME datasources.
Yes
Cheers
SAP NetWeaver BI Organisation

Enable real-time indexing

Hello,
I have just created a new index (template and connector) for some of my custom tables.
Additionally I have implemented
IF_BADI_ESH_IF_OBJECT_DATA~GET_DATA
IF_BADI_ESH_IF_OBJECT_DATA~NEXT
for the index in my own class.
The index is build up fine when starting the indexing process manually.
I have flagged the template for real-time indexing and I have also made sure that real-time indexing is setup (ESH real-time indexing deamon is running). I checked that at least everything is working for the standard MATERIAL connector.
My question is: How can I enable real-time indexing for my new connector?
Regards,
Alexander

Hello Harit,
thanks for your reply. Actually I already did the steps you described but that didn't work as expected.
Solution to our issue was to update our systems to a newer patch level.
Regards,
Alexander

Has anyone implemented real time datasource for COPA ?

Hello,
Has anyone implemented a real time data source for COPA ? Please share details of the process for how this can be set up. Thanks.

Hi,
Please follow the following steps...
COPA Extraction
The below are the command steps and explanation. COPA Extraction -steps
R/3 System
1. KEB0
2. Select Datasource 1_CO_PA_CCA
3. Select Field Name for Partitioning (Eg, Ccode)
4. Initialise
5. Select characteristics & Value Fields & Key Figures
6. Select Development Class/Local Object
7. Workbench Request
8. Edit your Data Source to Select/Hide Fields
9. Extract Checker at RSA3 & Extract
BW
1. Replicate Data Source
2. Assign Info Source
3. Transfer all Data Source elements to Info Source
4. Activate Info Source
5. Create Cube on Infoprovider (Copy str from Infosource)
6. Go to Dimensions and create dimensions, Define & Assign
7. Check & Activate
8. Create Update Rules
9. Insert/Modify KF and write routines (const, formula, abap)
10. Activate
11. Create InfoPackage for Initialization
12. Maintain Infopackage
13. Under Update Tab Select Initialize delta on Infopackage
14. Schedule/Monitor
15. Create Another InfoPackage for Delta
16. Check on DELTA OptionPls r
17. Ready for Delta Load
LIS, CO/PA, and FI/SL are Customer Generated Generic Extractors, and LO is BW Content Extractors.
LIS is a cross application component LIS of SAP R/3 , which includes, Sales Information System, Purchasing Information System, Inventory Controlling....
Similarly CO/PA and FI/SL are used for specific Application Component of SAP R/3.
CO/PA collects all the OLTP data for calculating contribution margins (sales, cost of sales, overhead costs). FI/SL collects all the OLTP data for financial accounting, special ledger
1) Add the fields to the operating concern. So that the required field is visible in CE1XXXX table and other concerned tables CE2XXXX, CE3XXXX etc.
2) After you have enhanced the operating concern then you are ready to add it to the CO-PA data source. Since CO-PA is a regenerating application you can't add the field directly to the CO-PA data source. You need to delete the data source and then need to re-create using KEB2 transaction.
3) While re-creating the data source use the same old name so that there won't be any changes in the BW side when you need to assign the data source to info-source. Just replicate the new data source in BW side and map the new field in info-source. If you re-create using a different name then you will be needing extra build efforts to take the data into BW through IS all the way top to IC. I would personally suggest keep the same old data source name as before.
If you are adding the fields from the same "Operating concern" then goto KE24 and edit the dataaource and add your fields. However if you are adding fields outside the "Operating concern" then you need to append the extract structure and populate the fields in user exit using ABAP code. Reference OSS note: 852443
1. Check RSA7 on your R3 to see if there is any delta queue for COPA. (just to see, sometimes there is nothing here for the datasource, sometimes there is)
2. On BW go to SE16 and open the table RSSDLINIT
3. Find the line(s) corresponding to the problem datasource.
4. You can check the load status in RSRQ using the RNR from the table
5. Delete the line(s) in question from RSSDLINIT table
6. Now you will be able to open the infopackage. So now you can ReInit. But before you try to ReInit ....
7. In the infopackage go to the 'Scheduler' menu > 'Initialization options for the source system' and delete the existing INIT (if one is listed)
Regards,
Tapan

Datasource:Real time enabled

Similar Messages

Maybe you are looking for