DataSource Transport to another system

HI,
I have transported the DataSource from Development system to Quality system. The datasource is showing under the source system of Development system in Quality system. How can I change this Datasource to source system Quality system.
thanks and regards
Murugesan

HI,
Have you checked the source system assignment and conversion of logical systems names after the transport?
RSA1 --> Menu bar -->Tools -->conversion of logical systems names
Enter the original source system (Dev) and Target source system (QA) save it...
Regards
KP

Similar Messages

Is the complete query overwritten once it is transported to another system?

Hi,
I had developed a query with some variables on the infoset. This has been transported to the production system.
But due to some requirement change the infoset was impacted due to the changes made in the ODS. (on which the infoset was created).
So the infoobjects technical names of ODS in the Infoset had changed. (F1 to F11....). Due to this the variables which were built on this infoobjects after the change are showing up under different infoobjects after technical name change.
Now to solve the issue, if i delete the variables and create under their respective infoobjects and transport to production system, will this work? Will the varaibles which were already transported to production system deleted automatically after the query is again transported to the production system?
Please help
Thanks,
Rani

Hi Rani,
Make sure u include the deletion change in the transport.
when u delete the variable it will ask for trnasport.
and also to ensure all ur changes are in the transport go to transport connection in RSA1. In that ->object types->query element->find ur query and trasnfer it.
make the grouping as 'only necessary objects'.
it will give u the list make sure it is all present in ur transport.
u can see the transport number in the rightmost window.
If u see all are not included tick and use the 'transport' -truck icon on topic.click on that and assign the transport.
hope it helps
Regards,
Rathy

How to transport R/3 datasources to another system (Urgent)

hai friends
I want to transport R/3 datasources i.e 2lis_03_bx, 2lis_03_bf, 2lis_03_um
these are transport to another system i.e QAS 300
please tell me the procedure
Urgent
Thanks
Ravindra

Hi Ravindra,
If the datsources are active then the steps are as follows:
1. Goto se03 -> Change Object Directory Entries -> Enter R3TR DSAA and the datasource name -> assignn a apckage and create the transport request.
2. Repeat the process for the next datasource and so on.
3. Now goto se09 and relase transport request.
4. Use STMS to transport the request.
Bye
Dinesh
(Assign points if useful)

Lis--Updating cannot be tramnsported to another system

Hi All,
am very new to BW. I am having problems to extract LIS info to BW.
read all the mails in SDN on LIS extraction.
IN txn MC24 when i am trying to update my info structure i am getting the message
"Updating cannot be transported to another system"
in log i saw it asks me
"The info structure S998 has the development class $TMP and therefore cannot be transported. For this reason updating definitions for info structure S998 cannot be transported to another systems.
Procedure
It is possible to transport the update rules to another client in the same system.
If you still want to transfer the info structure, call up the function transport features in the info structure maintenance (transaction MC22) and change the development class.
when i went to MC22 and went to "Create object directory entry"...
i see package as $tmp so had selected local object...was the above problem due to it...
If i have to create another package then what do i have to do and what transport layer should i put"
hoping to get some reply. Am very confused with this LIS and LO extractions . Spend a lot of time in tryong to understand it.
Thanks
Mansi

In the past two weeks I did a bit of research but not to much avail. I noticed I had the "Locale Switcher" add on installed, and deactivated it. Switching languages in the "Languages" tab of "Add-ons" still did not work (yes, I restarted every time). I installed the "'''Quick Locale Switcher''' 1.7.4" extension (yes, I restarted), and it displays a number of locales in the "Tools" menu; still choosing one has no effect (yes, I restarted).
Then I juggled with Quick Locale Switchers "options", which actually displayed in Esperanto (so I cannot tell you what they say in English). I check the first one (saying more or less that locale switching should affect the user interface) and switched to German (yes, I restarted) -- and '''it worked'''! I switched to Esperanto -- and Firefox went to ... English!
After a lot of searching in the Web I found on "[https://addons.mozilla.org/en-US/firefox/addon/esperanto-language-pack/ https://addons.mozilla.org/en-US/firefox/addon/esperanto-language-pack/]" that this pack is "'''Not available for Firefox 3.6.16'''". That might explain something (not everything); probably I lost my language when I upgraded from 3.5 to 3.6.
Here a little error message could save people hours of their lives...

Copy Web Dynpro to another system - no transport

Hello
is it possible to copy a web dynpro to another system without using a transport? I know that i can simply copy and past the code of the methods but what about the layout, the context nodes, views, windows, .....
Thanks in advance
Fabian

and you need the Webdynpro Plugin from here:
[saplink-plugins|http://code.google.com/p/saplink/wiki/pluginList]

How to Transport a planning book to another system

Hello,
Can someone please let me know how to transport a planning book to another system?
Thanks for your time.
Sarath.

Dear Sarath,
Transporting Macro Books:
You can add macro books to a transport request so that they are transported to the target system(s) when the request is released. When you transport a macro book, the system exports relevant notes directly to the target system. For this, you must specify the relevant RFC destination.
To be able to use macro books in another system, you need to have already exported other objects such as the relevant planning object structures and planning areas to the target system. You do this in Customizing for Demand Planning or Supply Network Planning under Basic Settings -> Maintain Manual Transport Link for DP/SNP. You can also use this activity to transport macro books. If the planning area does not exist in the target system, you can transport the macro book, but you cannot open the macro book or use the macros.
To transport a macro book, select the book and choose Tools -> Transport Macro Books. On the dialog box that appears, enter an existing transport request or create new one. The transport request determines the system to which the macro book is transported. Choose Enter.
Regards,
Naveen.

Transporting SBWP distribution list to another system

Hi all,
Have anyone knows how to transport a SBWP distribution list to another system? I mean transport it from development system to QA system.
Thanks,
Teddy

I think the distribution list is not transportable. I will use another method to store the data so it will be transportable.

How i can copy my transport request from one system to another system

hi,
i want to copy all my code means( programs,tcode,class,FM...every thing.) which is under a transport request, now i want to copy all this code same as it is in another system
eg.
i have all my objects in for example D10 now i want all my code in some another system for e.g in D30.
how it is possible....

Hi Vipin,
Check tcode SE03 for transport related issues.
as suggested by all the TR needs to be released from the current system to make it ready to be transported to next system.
Once you release the request ask your basis administrator to transport the request to D30.
<b>Before releasing the request check with the basis administrator if the target system has been set to D30.</b>
Lokesh
Message was edited by:
Lokesh Aggarwal

Probelms while replicating Data Source and transport into test system

I find the following error messages whilre transporting into test system.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Mapping between data source 0EC_PCA_1 and source system is inconsistent.
DataSource 0EC_PCA_1 does not exist in source system of version A.
Field AFABE will not be delivered from DataSource 0EC_PCA_1 in source system.
any ideas please..........
Enhanced the Extract structure and activated the data source in Source system
Replicate the Data source in BI and install the Infosource through BI Content activated and transport them to Test system.

Hi,
1.First transport the data source from R/3 dev to R/3 quality
2.Replicate the data source in BI Quality ( make sure you that in the data source tab, you are searching the data source below the appropriate source system ---otherwise you data source may not appear)
3.goto rsd1in BI development for activataing the info objects which you have added extra in the info source (z info objects )
activate these info objects and collect in another request
4.transport these info objects from BI dev to BI quality
5.transport entire data source to bw quality.
Thanks,
Tarun Brijwani.
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM
Edited by: Tarun Brijwani on Apr 6, 2009 4:26 PM

ABAP program developed in one system will it run in another system.

Hi All,
       I have a very important query.
I know that SAP 4.7, BW 3.1 and SAP CRM 4.0 have same kenel release SAP Basis 620.(please correct me if I am wrong)
If Kernel in these systems are same, will an ABAP program developed in one system (say SAP 4.7) also work in another system (say CRM 4) with same kernel.
This is very important me.
Please help.
With Regards
Amit

Hi Amit,
1. If we transport a program from R/3
   to BW or CRM,
   It will work inside BW,CRM
   Bcos the basis/abap layer is always there in such systems.
2. However, if the program uses some tables/FMs etc,
   which are not there in the Bw/Crm,
   then it may give error. thats all.
Regards,
Amit m.

SENDING MAIL TO ANOTHER SYSTEM IN INTRANET BY USING SMTP

hi
i am able to send simple smtp messages within the single localhost but i am not able to send it to another system ,plz help me .i also need to get the reply from that system since i am the server. i am using jsp code.
i have enclosed the code
mail.jsp
<%@ page language="java" import="javax.naming.*,java.io.*,javax.mail.*,
javax.mail.internet.*,com.sun.mail.smtp.*"%>
<html>
<head>
<title>Mail Send:Defect Tracking System</title>
</head>
<body>
<%
try{
Session mailSession = Session.getInstance(System.getProperties());
Transport transport = new SMTPTransport(mailSession,new URLName("cl301"));
transport.connect("cl301",25,null,null);
MimeMessage m = new MimeMessage(mailSession);
m.setFrom(new InternetAddress(%><%request.getParameter("from")%><%));
Address[] toAddr = new InternetAddress[] {
new InternetAddress(%><%request.getParameter("to")%><%)
m.setRecipients(javax.mail.Message.RecipientType.TO, toAddr );
m.setSubject(%><%request.getParameter("subject")%><%);
m.setSentDate(new java.util.Date());
m.setContent(%><%request.getParameter("description")%><%, "text/plain");
transport.sendMessage(m,m.getAllRecipients());
transport.close();
out.println("Mail Send!");
response.sendRedirect("Login.jsp");
catch(Exception e){
out.println(e.getMessage());
e.printStackTrace();
%>
</body>
</html> mailApi.jsp
<%@ include file="TemplateObj.jsp" %>
<%@ include file="Common.jsp" %>
<%!
%>
<html>
<head>
<title>Mail:Defect Tracking System</title>
</head>
<link rel="stylesheet" href="style/stylesheet.css" type="text/css">
<body>
<table>
<tr><td><img src="images/header.gif"</td></tr></table>
<br>
<table align="right">
<tr><td><img src="images/bug_chick.gif"></td></tr></table>
</p>
</form>
</td>
</tr>
</table>
<table border="1" width="50%" cellpadding="0" cellspacing="0">
<tr>
<td width="100%">
<form method="POST" action="mail.jsp">
<table border="1" width="100%" cellpadding="0" cellspacing="0">
<h1>Send Bug Mail</h1>
<tr>
<td width="50%"><b>To:</b></td>
<td width="50%"><input type="text" name="to" size="30"></td>
</tr>
<tr>
<td width="50%"><b>From:</b></td>
<td width="50%"><input type="text" name="from" size="30"></td>
</tr>
<tr>
<td width="50%"><b>Subject:</b></td>
<td width="50%"><input type="text" name="subject" size="30"></td>
</tr>
<tr>
<td width="50%"><b>Description:</b></td>
<td width="50%"><textarea name="description" type="text"
cols="40" rows="15" size=100>
</textarea>
</td>
</tr>
<tr>
<td><p><input type="submit" value="Send Mail" name="sendMail"></td>
</tr>
</table>
</body>
</html>

do NOT use JSP for anything except presentation of data, NEVER use it for anything else.
If you need Java code inside a JSP, it shouldn't be a JSP.
What makes you think you can't send mail to another server?
What errors are you getting (I can guess, and I have 2 very strong contenders for the title, but I can't be sure)?
To find out what replies a mailserver can give, read the relevant RFCs. Of course if you close the connection without waiting for (let alone handling) those responses you're never going to see them.

Exit Fm is not to CMOD project but transported to test system

Hi.
I have a enhancement MWMIDO08 with contains function module EXIT_SAPLLMDE_002 and which incldes program ZXLIDU10.
I made my necessary changes in the include program and transported to test system, without creating any CMOD project.
But my changes are working fine in test test.
Can you please suggest me, what to do now? if i want create a CMOD project now and add the function exit into it. and resend the new request to test system.
Does it create any problem.

This sort of thing can happen if someone has assigned a CMOD project to the enhancement containing the user exit before.
First check in SE16, table MODACT with MODACT-MEMBER = 'MWMIDO08', then MODACT-NAME will give you the existing project that is already assigned to enhancement MWMIDO08
If there is no entry in MODACT then you can safely create another project and assign the enhancement to it, activate and transport.
If already there is an entry in MODACT, you need to check if the same entry exists in your QA and Prod systems, to verify if someone already transported it. If it is not transported you need to deactivate / activate the project and transport that project again.
No this should not cause any problem and I can tell from experience having done same thing before.
Best regards,
Vishnu Tallapragada

How to download GUI status and then upload to another system?

Hi,
I have a requirement to copy a module pool program to another system (different system, it cannot be transported to that system)
We have options to download/upload programs/screens in SE38 and SE51. But, I couldn't see any such option in SE41.
Is there any other way to download GUI status from SE41 and then use that file to upload in other system?
Thanks in advance.
Regards,
Arun Mohan

Hello Arun,
If the object's transport order has been released, you can ask your basis person to download and import that request files(Co file + Data file) from the current system to the new system.
This is the easiest possible way to achieve your requirement.
Regards,
Karthik D

Customizing table Changes to another system

Hello all,
When ever changes occurred to personnel area HR table T500P then the changes needs to be replicated in another system.
how to capture the change log details?
Please provide the inputs.
Regards
Aravind

Hi,
First : In the table T500P , some of the field data elements dont have change log checked. so we will not able to use CDHDR and CDPOS table. I have to capture all the changes for this table.
Second: technical setting of the table has data log change check box is ticked but SCU3 is not activated . so this one also we can't use .
Third: Transporting data from on system to another system:For this there is no T500P table exist in the SRM system.
could you please elaborate how to use this step?
Fourth:
1. creating Ztable as copy of T500P and update the ztable with T500P data.
2. write events for this table to update T500P and also trasfer the data.
but thing is we should have to maintain custom table . If T500p changes then it will not update the ztable.
Fifth: I came to know that there is one message type "CONDA2" for Synchronizing Customizing Data Between Systems.
but don't know the procedure to get the complete solution.
Please provide your inputs..
Regards
Aravind.

Datasources in a 3 system landscape and transformations

Hello,
I am working on a 3 system landscape on Netweaver 2004s. As I know, for every sourcesystem,
there is produced a different datasource. When I want to Test a transformation
between a datasource and a datatarget in the develpment system, quality system
and productiv system, does this mean that I have to implement a transformation for
each of these three systems?
Thank you.
Regards, Lars.

Hi,
that you test your object in every system ist clear. The problem I have is, that
I don't want to implement the same transformation 3 times.
So if I understand your answers, I always have to implement 3 transformations
that have as source a datasource:
1. The first transformation references the datasource in the development system.
2. The second transformation references the datasource in the quality system.
3. The third transformation references the datasource in the producitv system.
The only alternativ I see ist to transport first the datasource from the development system
into the quality system and the producitv system and than reference in the
transformation only the datasource in the productiv system. In this case I need
only one transformation. Is this right?
Thanks.
Regards, Lars.

DataSource Transport to another system

Similar Messages

Maybe you are looking for