DataSource Unavailable ..on console but application is fine....

Last week one of our Data bases was down for a while when some servers which use this DB in their Data sources were bouncing......so the servers would go into ADMIN mode ...i just pushed them to RUNNING mode and after a while the DB was back up ....when i checked the console there was no indication that the DS was running on that server now....but when i checked the front end application ..it was all working...that is the functionality which uses the DS was working......
Doesn't the console automatically update when the DB is back up and the DS is working???.........After bouncing the servers again ...the console indicated the DS was running.....Is this a console problem or is this how its supposed to work.....

Appreciate your response....how ever my question was .....when the DB is back up and DS is functioning (verified from front end) still the console didn't reflect the availability of the DS....but after a few hours(12-13 hrs) when the servers bounced the console was updated....(our servers cron bounce daily in the night --due to some application specific reasons)....So again my question is "Is the console supposed to be updated with the state of the DS when it becomes available...."

Similar Messages

Site seems to publish fine, and shows up correctly in Preview in console, but doesn't push to www

this was working fine for weeks.
on muse, site changes seem to go fine and when i publish it seem to suggest the correct site name with the www.domainname.com below it.   publish action on muse seems fine.
when i look in the admin console, and hit the Preview i see the modified site... but when i go to the www.domainname.com it isn't updated.
the piece of disclosure/info here is that the machine i'm on was on a network that we decided to take off of domain/domain controller and go back to simple workgroup.   when i launched muse the first time, i had forgotten to move some of the setup folders back in to the new user directory. this particular site was the only one i opened prior to getting those adobe and adobe muse folders moved.   i did try to publish it and had to pick which of my sites to publish to, but that all seemed ok.    my other sites (opened after moving the folders) all update fine, show up in Preview in console, and at the live www
if a catalyst person grabs this, i'm happy to give you account and site stuff if that helps.

hi sanjit,
back at my desk where i have muse installed.   i just re-built and
published the modified site on muse, and sent it.
i still just see the old site at the www.'domain'.com.   i hit 'manage' in
muse to pull up my console for that site.   in 'preview' tab there i looked
at one of the changed pages, and it shows up in preview in console.    in
www.   no changes show.
i can make small changes (make a period a semicolon) and always see the
changed pages in preview tab of console but not at www.
i'll see if i can figure out the support case request below and get a
number to forward to you.
tim

We had migrated our servers from a domain to cloud. all the web applications working fine locally, but from outside they are accessible but on editing giving 404 with some request id.

hi all,
recently we migrated our moss 2007 from a domain to cloud env. everything goes well and all the application working fine locally.
but when users are trying from outside first they get promt for basic auth, that is enabled, its fine. then servers serve first page smoothly. all the application browsing is fine. but when authorized users are trying to edit a web page and they click on
anything(save, submit for publication, publish) they get 404 with a request ID. another thing if they add a new page to app and then make any changes to that page then they are not getting any issue.
please help if any one resolved that kind of issue.
thanks in advance.
SJ

Hi Sumanpreet,
Thanks for posting your issue, Kindly check out below mentioned URLs to get the fix for this issue
http://www.sharepointdiary.com/2011/02/404-page-not-found-error-sharepoint-2010-migration.html#ixzz2jHyVIFcX
http://vasya10.wordpress.com/category/sharepoint-2010/sharepoint-2007-to-2010-migration/
https://social.technet.microsoft.com/Forums/en-US/d80e7495-e889-4209-9a0a-82a852c944b1/after-migration-from-moss-2007-to-sharepoint-2010-i-tried-to-check-the-site-with-site-url-getting?forum=sharepointadmin
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

I have continuous problems with my iPad Mini, and it is getting worse! Newstand application keep pausing or crashing, websites keep hanging first time in but then open fine the second time, and I have problems with applictions crashing.

I have continuous problems with my iPad Mini, and it is getting worse! Newstand application keep pausing or crashing, websites keep hanging first time in but then open fine the second time, and I have problems with applictions crashing. Has anyone experienced similar problems and any suggestions?

Has the device always behaved this way? Did this start as a result of an update to the iOS software? If the problem is that bad, you should probably restore the iOS software and then restore from a backup. If that fails, restore as new and rebuild the device. If that fails, it's time for a trip to an Apple Store to let them have a look at the iPad.
Use iTunes to restore your iOS device to factory settings

No reports are visible in ConfigMgr 2012 R2 console but in visible in SSRS report manager

I'm installing ConfigMgr 2012 R2 with SQL server R2 SP2 in my lab environment. Everuthing went fine until i stumped upon a problem where the reports are not visible in Admin console but are visible in IE
I've gone through all the pre requisites and everything looks good.
The installation went fine and no errors in srsrpsetup.log and srsrpmsi.log
Reports are returning values while i'm running through IE
changed the AdminUIlog level to verbose and found the below error whenever i refresh the reporting node.
[44, PID:10712][12/20/2013 04:16:39] :Console query 'AllReports' started
[44, PID:10712][12/20/2013 04:16:39] :SRSQuery: Executing query [AllReports] - [/ConfigMgr_LAB]
[44, PID:10712][12/20/2013 04:16:39] :[sccm.lab.local] : The request failed with HTTP status 503: Service Unavailable.
[44, PID:10712][12/20/2013 04:16:39] :[sccm.lab.local] : The request failed with HTTP status 503: Service Unavailable.
[12, PID:10712][12/20/2013 04:16:39] :Actions returned from cache for node 'msscnav://root/Windows/Wunderbar/ConsoleDisplay/MonitoringNode/MonitoringNodeOverview/ReportingRootNode/ReportsNode'.
Any ideas ?
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

Thank you Garth, I can access the reports from other hosts as well.
Yes ,Newly created admins can see all the reports
I've gone through the event logs and nothing related to SSRS.
I dont think it's a FQDN issue, bcoz ican see in the logs the that the admin console successfully connected to reporting service. Only while retreiving the reports it throws error
[10, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Discovered reporting services point - 'sccm.lab.local'.
[10, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Root folder name is 'ConfigMgr_LAB'.
[12, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Connected to Reporting Services [MSSQLSERVER] - [http://sccm.lab.local/ReportServer], on machine [sccm.lab.local]
[20, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Connected to Reporting Services [MSSQLSERVER] - [http://sccm.lab.local/ReportServer], on machine [sccm.lab.local]
[20, PID:3172][12/23/2013 06:13:23] :SRSQuery: Executing query [Folders] - [/ConfigMgr_LAB]
[12, PID:3172][12/23/2013 06:13:23] :SRSQuery: Executing query [Folders] - [/ConfigMgr_LAB]
[12, PID:3172][12/23/2013 06:13:23] :SRSQuery: Retrieving folders in path [/ConfigMgr_LAB].
[20, PID:3172][12/23/2013 06:13:23] :SRSQuery: Retrieving folders in path [/ConfigMgr_LAB].
[10, PID:3172][12/23/2013 06:13:23] :[ReportProxy] - Connected to Reporting Services [MSSQLSERVER] - [http://sccm.lab.local/ReportServer], on machine [sccm.lab.local]
[10, PID:3172][12/23/2013 06:13:23] :SRSQuery: Executing query [AllReports] - [/ConfigMgr_LAB]
[10, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
[12, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
[20, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
[10, PID:3172][12/23/2013 06:16:28] :[sccm.lab.local] : The request failed with HTTP status 401: Unauthorized.
and as you can see, it gives me "HTTP status 401: Unauthorized." instead "HTTP status Unnavailable".
Yes, i'm not a fan of accessing reports via console, but i dont want to leave an issue unresolved.
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded

Here is a ticket regarding our current client web application ( Image data add, edit , delete in folder with form data in MSSQL Database) that using code c#, web form, ajax, VS2008, MSSQL Server2008 , it appears that there is an error where the HTTP
503 error occurs.
. Below is a conversation with Host Server support assistant.Can you take a look at it?
Ben (support) - Hi
Customer - We're having an issue with our windows host
Ben (support) - What's the issue?
Customer - 503 errors
Ben (support) - I am not getting any 503 errors on your site, is there a specific url to duplicate the error?
Customer - no, it comes and goes without any change Customer - could you have access to any logs ?
Ben (support) - Error logs are only available on Linux shared hosting, however with this error it may be related to you reaching your concurrent connections
Ben (support) - You can review more about this at the link \
Customer - probably yes - how can we troubleshoot ?
Ben (support) - http://support.godaddy.com/help/article/3206/how-many-visitors-can-view-my-site-at-once
Ben (support) - This is something you need to review your code and databases to make sure they are closing the connections in a timely manner
Customer - we're low traffic, this is an image DB to show our product details to our customers
Customer - ahhhh, so we could have straying sessions ?
Ben (support) - Correct Customer - any way you could check if it's the case ?
Customer - because it was working previously
Ben (support) - We already know that's the case as you stated the 503 errors don't happen all the time if it were issue on the server the the 503 would stay.
Customer - so our 2/3 max concurrent users can max out the 200 sessions
Customer - correct ?
Customer - is there a timeout ?
Ben (support) - no that's not a time out concurrent connections are a little different then sessions and or connections. Lets say for an example you have 5 images on your site and 5 7 users come to your site this is not 7 concurrent connections but 35. They
do close after awhile hence why the 503 error comes and goes. You can have these connections close sooner using code but this is something you have to research using your favorite search engine
Customer - thank you so much
Customer - I'm surprised that this just started a few weeks ago when we haven't changed anything for months
Customer - any changes from your side ? lowering of the value maybe ?
Customer - I'm trying to understand what I can report as a significant change
Ben (support) - We haven't touched that limit in years
Ben (support) - This could just be more users to your site than normal or even more images
Customer - I was thinking that could be it indeed
Customer - so I need to research how to quickly close connections when not needed
Ben (support) - Correctly
Ben (support) - correct
Customer - thanks !!
Ben (support) - Your welcome
Analysis :
The link provided tells us : All Plesk accounts are limited to 200 simultaneous visitors.
From what Ben (support) says and a little extra research, if those aren't visitors but connections then it's quite easy to max out, especially if the connections aren't closed when finished using. I'd suggest forwarding this to Kasem to see what he thinks.
Cheers,
Customer

Hi Md,
Thank you for posting in the MSDN forum.
>>
I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded.
Since
Visual Studio General Forum which discuss VS IDE issue, I am afraid that you post the issue in an incorrect forum.
To help you find the correct forum, would you mind letting us know more information about this issue? Which kind of web app you develop using C# language? Is it an ASP.NET Web Application?
If yes, I suggest you could post the issue directly on
ASP.NET forum, it would better support your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

ALSB 3.0 : Request message works in Test Console but not from Client side

By invoking a Web Service operation through a signature/encryption enabled Proxy Service in the ALSB Test Console for Proxy Services, i get a successful response.
Now when invoking the operation from a client application i get the following error response:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<faultcode>wsse:FailedCheck</faultcode>
<faultstring>weblogic.xml.crypto.encrypt.api.XMLEncryptionException: Unable to resolve encryption key for weblogic.xml.crypto.encrypt.api.EncryptedType{keyInfo=null, cipherData=CipherValue: zDeM4MKI8OeFzgJAR+z16ZE3cUfw54DtMKojPNACkVVZM0hazes+DcI4rJIHWzgt5N259pi9WTKgSEgBxQLZ3qD6PycrwTZuQ/4g2JbBwLwbO9WS40NsIhZRQCtguFPG8vKwNWeoXMOZ5w0m3jhV2ahFWZCTAipoG4XIOv/7pEw=, id='Enc-6abda982-1678-4774-97f3-cada98d32869', mimeType='null', encoding='null', encryptionMethod=EncryptionMethod: algorithm = http://www.w3.org/2001/04/xmlenc#aes256-cbc;}</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
Even when pasting the original request from the Test Console in ALSB into "soapUI" and executing the request it does not work:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<env:Fault xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<faultcode>wsse:InvalidSecurity</faultcode>
<faultstring>Could not validate encryption against any of the supported token types</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
So what's behind all this? Why does it work in the test console but never from other points.

In both ways, with Direct Call option selected or deselected, the behaviour is the same.
I cannot explain, why the replay of the request does not work from outside the Service Bus. Is there some sort of unique data mixed into the CipherValue data or something like that?

Nokia 2330 - Browser working but applications do ...

Hi!
As mentioned above, I am missing internet connectivity for the applications that I have installed or were installed by Nokia. The mobile-built in browser and e.g. downloading of applications work fine via the GPRS network!
My mobile is hooked up to the Austrian bob network.
Would be glad on any suggestions to fix this problem!!!
Thank you!
Bene

beneedict wrote:
I have restored the factory settings using "restore settings only" before. This did not improve the problem. But I do not want to "restore all" since I would lose all my messages, contacts, ... on my mobile. By the way, I do not find any access points in the "prefered access points" list. Could this be the cause of the problems? If so, would you have any suggestions how to add one?
Thank you for your efforts!!!
Well, that could be the main issue here. You have to set up a packet-data (gprs) connection. In order to do so, you've to contact your service provider or visit their website for the right settings.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Installed application works fine for administrators, not for users - LV7.1.1

Hi,
Someone must have posted this before, but I can't find it anywhere after much searching of the knowlege base and user forums. Feel free to point me in the right direction...
I have an application that loads and plays a wav file, and applies a filter while playing it back. The user may select the filter being used from the control panel. Filtering is done in1/8 second chunks, so changes in the filter appear instantanious.
I'm using LabView 7.1.1 (i.e. 7.1 with the 7.1.1 maintainence release applied). Filters have been created with the Digital Filter Design tool in the Signal Processing toolset.
I have created an installer using the application builder in LabVIEW. The runtime engine is included in the installation, as are the filter files.
Once installed on a target machine the application works fine for anyone logged on with administrator rights/privileges. For anyone with user or guest privileges the filter either doesn't re-load or isn't applied to the wav file regardless of the user's efforts on the control panel.
The audio file is however loading and playing back.
This problem is seen on W2k, WinXP Pro SP1 and Win XP Pro SP2. I can't comment on other O/S, that's all I have available to test on.
This is tricky to debug, as in the installed application you can't view or step through the source code.
Your ideas and observations much appreciated.
Bandit

You're right Sacha, it takes almost no time to rate an answer. Only 4* for you, as the info is interesting and relevant, but in this instance I wanted to stick with read only access. These filter files are an integral part of my application, and I certainly don't want users changing them .
A little further investigation has provided the ideal fix for my needs. Burrowing down into the Read DFD coefficients.vi provided in the signal processing toolset I found the files are opened for read & write. The mode isn't actually wired, so read & write is selected as it's the default. As Windows only allows read access in this location to those with user privileges the files won't open.
I now have a modified version of Read DFD coefficients.vi that has the files opened for read only (this has to be done in 2 places). I have tested this on Win2k and XP SP2, and it works exactly as I require. This is different to the user in your other thread Sacha, as they specifically want everyone to be able to write to their files.
Perhaps it's a question for the LV developers - should the Read DFD coefficients.vi be changed to only give read access? (assuming it hasn't been changed already in V8). I'm in no place to assess the impact on other users. As the .vi is only a read function, which opens the file, reads the coefficients and closes the file again I can't see how it would be a problem though - the write access isn't required.
Thanks to all for their help on this. Problem solved, and I'm a happy bunny . (Thinks - what about some bunny smilies on the forum?)
Bandit

Apps installed from disk, but Application Manager shows them as not installed

I have all Creative Suite (Master) apps installed from disk, but Application Manager shows them as not installed. Why?

I find a way that could be firing this issue.
First, I installed Creative Cloud in spanish language, then installed some apps like DW, PS, FW, FL, and some more.
Then, some days ago, I realized that my apps were in spanish language, but I prefer them in english, so I switched the language of CC to english in settings options.
Now, these apps installed in spanish language are marked as "not installed" and I see the option to install them. And applications installed before language change, are fine and tracked for updates.
Maybe the issue is related to language changed, the CC manager can't track the language change.
Hope to find a solution in short time, this could be a major issue for someone.
At this time, I'm re-installing the apps in english, I think they must override the spanish ones.
I'm using MacOS 10.8.4 (Mountain Lion) on MacBook AIR, Core i7 (if that make sense)
Cheers!
Mariano Carrizo

WebStart with console based applications

Hi:
I've been struggling all day to get WebStart to work with a console based application (i.e., an application with no user interface that's launched from a shell window). When I launch the application with WebStart, the shell window is not visible. I've tried turning on the advanced option to show the console window, but only System.out and System.err go to there -- you cannot enter user input. Is there a way to run a console based application for a console based application? Thanks.
-- Greg

Hi,
WebStart cannot get input from the console window.
You may have to use some dialog boxes to get your input.
zamir

How to debug weblogic console extension application ?

Hi,
I am developing a weblogic console extension application with web logic portal framework, I got some error, but no idea how to debug,
I can see some error on buildApplication.jsp file, but can't find __buildapplication.java file which is compiled from buildApplication.jsp,
so I can't know the error is in which line in buildApplication.jsp file. and I dont' even know which tag is tag1 tag2 tag3 in that jsp file.
at jsp_servlet._ext_jsp.__buildapplication._jsp__tag3(__buildapplication.java:292)
at jsp_servlet._ext_jsp.__buildapplication._jsp__tag2(__buildapplication.java:260)
at jsp_servlet._ext_jsp.__buildapplication._jsp__tag1(__buildapplication.java:211)
at jsp_servlet._ext_jsp.__buildapplication._jspService(__buildapplication.java:138)
Code of buildApplication.jsp:
     <fmt:setBundle basename="detwds" var="current_bundle" scope="page"/>
     <beehive-template:template templatePage="/layouts/configBaseLayoutNoTransact.jsp">
          <beehive-template:section name="configAreaIntroduction">
          <fmt:message key="buildApplication.jsp.page.introduction" bundle="detwds"/>
          </beehive-template:section>
          <beehive-template:section name="form">
          <html:xhtml/>
          <wl-extension:template name="/templates/jmxform.xml">
          <wl-extension:form name="ExtensionForm" type="com.det.consoleext.form.ExtensionForm" action="/BuildApplication" bundle="detwds">
          <wl-extension:select
          property="contents"                                                   labelId="buildApplication.jsp.page.repositoryList.label"                                                   inlineHelpId="buildApplication.jsp.page.repositoryList.inlinehelp"
          singlechange="false">
               <wl-extension:optionsCollection                                                                  property="repositoryName"
                    label="label"
                    value="value"/>
          </wl-extension:select>
          </wl-extension:form>
     </wl-extension:template>
     </beehive-template:section>
     </beehive-template:template>
Error message:
2755> <BEA-423405> <An exception [java.lang.String] was thrown while rendering the content at [ext_jsp/buildApplication.jsp].
java.lang.ClassCastException: java.lang.String
at jsp_servlet._ext_jsp.__buildapplication._jsp__tag3(__buildapplication.java:292)
at jsp_servlet._ext_jsp.__buildapplication._jsp__tag2(__buildapplication.java:260)
at jsp_servlet._ext_jsp.__buildapplication._jsp__tag1(__buildapplication.java:211)
at jsp_servlet._ext_jsp.__buildapplication._jspService(__buildapplication.java:138)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454)
at org.apache.beehive.netui.pageflow.scoping.internal.ScopedRequestDispatcher.include(ScopedRequestDispatcher.java:119)
at com.bea.netuix.servlets.controls.content.JspContent.beginRender(JspContent.java:551)
at com.bea.netuix.servlets.controls.content.NetuiContent.beginRender(NetuiContent.java:363)
at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:483)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:375)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:341)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:332)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:306)
at com.bea.netuix.nf.UIControl.render(UIControl.java:578)
at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:482)
at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146)
at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62)
at jsp_servlet._framework._skeletons._default.__gridlayout._jspService(__gridlayout.java:285)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454)
at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:123)
at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72)
at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65)
at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:479)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:375)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:341)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:332)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:306)
at com.bea.netuix.nf.UIControl.render(UIControl.java:578)
at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:482)
at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146)
at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62)
at jsp_servlet._framework._skeletons._default.__gridlayout._jspService(__gridlayout.java:285)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454)
at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:123)
at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72)
at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65)
at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:479)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:375)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:341)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:332)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:306)
at com.bea.netuix.nf.UIControl.render(UIControl.java:578)
at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:482)
at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146)
at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62)
at jsp_servlet._framework._skeletons._default.__flowlayout._jspService(__flowlayout.java:281)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454)
at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:123)
at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72)
at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65)
at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:479)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:375)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:341)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:332)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:306)
at com.bea.netuix.nf.UIControl.render(UIControl.java:578)
at com.bea.netuix.servlets.controls.PresentationContext.render(PresentationContext.java:482)
at com.bea.netuix.servlets.util.RenderToolkit.renderChild(RenderToolkit.java:146)
at com.bea.netuix.servlets.jsp.taglib.RenderChild.doStartTag(RenderChild.java:62)
at jsp_servlet._framework._skeletons._default.__gridlayout._jspService(__gridlayout.java:285)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:34)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.RequestDispatcherImpl.invokeServlet(RequestDispatcherImpl.java:528)
at weblogic.servlet.internal.RequestDispatcherImpl.include(RequestDispatcherImpl.java:454)
at com.bea.netuix.servlets.controls.application.laf.JspTools.renderJsp(JspTools.java:123)
at com.bea.netuix.servlets.controls.application.laf.JspControlRenderer.beginRender(JspControlRenderer.java:72)
at com.bea.netuix.servlets.controls.application.laf.PresentationControlRenderer.beginRender(PresentationControlRenderer.java:65)
at com.bea.netuix.nf.ControlLifecycle$7.visit(ControlLifecycle.java:479)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:518)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursiveRender(ControlTreeWalker.java:529)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:220)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:375)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:341)
at com.bea.netuix.nf.Lifecycle.runOutbound(Lifecycle.java:188)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:142)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:377)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:253)
at com.bea.netuix.servlets.manager.UIServlet.doGet(UIServlet.java:206)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:191)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:124)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:226)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:124)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3393)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2140)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2046)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)

It is quite easy to rewrite the plugin to work with 8.1
We have done so - please contact me if you want the plugin.
Sincerely,
Paul Nyheim
"HOs" <[email protected]> wrote in message
news:3f72ce93$[email protected]..
>
Hi,
how can I debug my weblogic 8.1 application ?
I`m using eclipse, but the plugin I´ve got, is only for versions 6.x and7.0 .
So I tried remote debugging but eclipse could not connect to the VM, I donot
know why.
Any ideas ??
Thanks
Holger

My internet connection is intermittent with my MBP but it's fine with my iPad. What's up with that?

My internet connection is intermittent with my MBP but it's fine with my iPad. What's up with that?

Back up all data before making any changes.
Step 1
Take all the applicable steps in this support article.
Step 2
If you're running OS X 10.8.4 or later, run Wireless Diagnostics and take the remedial steps suggested in the summary that appears, if any. The program also generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. Continue if you find that Wi-Fi is faster with Bluetooth disabled.
From that same menu, select Open Bluetooth Preferences. If the box labeled Discoverable is checked, uncheck it. Click the Advanced button, and in the sheet that opens, uncheck the top three boxes, if any are checked. Click OK. Enable Bluetooth and test again.
If the application called "Bluetooth Setup Assistant" is running, quit it.
Step 4
This step will erase all your settings in the Network preference pane. Make a note of them before you begin, and recreate them afterwards. It may be helpful to take screenshots of the preference pane.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 5
Reset the System Management Controller.
Step 6
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional — ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
*An SSD doesn't need to be zeroed.

I have firefox os 19 and silverlight 5.1 but firefox doesn't recognize it but silverlight works fine in safari what can i do?

I have firefox OS x 19 and silverlight 5.1 but firefox doesn't recognize it but silverlight works fine in safari what else can i do?

Application
User Agent: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_5) AppleWebKit/536.28.10 (KHTML, like Gecko) Version/6.0.3 Safari/536.28.10
Ok, how's this? and flashback isn't installed, what else?

SuccessCodeList:0 but application won't install

SuccessCodeList:0 but application won't install while on offline installation..
Precisely, I have a clean TS which executes like a good kid! But 3 applications LN 8.5.3 incl Sametime , Lotus Notes 8.5.3 FP3 MU and an LN Upgrade pack. I am attaching a copy of the smsts.log. Please share your views.
I might do a workaround by disabling staging of the image and running it straight from the boot media. Also , if you must know the online installation works just fine.
[LOG[
Parsing step node: Lotus Notes 8.5.3 incl. embedded Sametime 8.5.2]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:558">
<![LOG[Description: ]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:562">
<![LOG[ContinueOnError: ]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:566">
<![LOG[SuccessCodeList: 0]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:574">
<![LOG[(__hrMethodRetVal == ((HRESULT)0L)) || (bFailIfMissing == false), HRESULT=80070002 (e:\nts_sms_fre\SMS\common\inc\ccmxml.h,566)]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context=""
type="0" thread="2964" file="ccmxml.h:566">
<![LOG[No condition is associated with the step.]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:776">
<![LOG[Disable: ]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:583">
<![LOG[Start in dir: ]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:591">
<![LOG[Run in attribute: FullOS]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:595">
<![LOG[Timeout: ]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:599">
<![LOG[DefaultVarlist found]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:683">
<![LOG[Variable name: _SMSSWDProgramName]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:724">
<![LOG[Action command line: smsswd.exe /pkg:PSG00199 /install /basevar: /continueOnError:]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964"
file="tsxml.cpp:626">
<![LOG[Adding instruction at 373]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:628">
<![LOG[
Parsing step node: Lotus Notes Upgrade Pack 8.5.3 UP1 MUI]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:558">
<![LOG[Description: ]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:562">
<![LOG[ContinueOnError: ]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:566">
<![LOG[SuccessCodeList: 0]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:574">
<![LOG[(__hrMethodRetVal == ((HRESULT)0L)) || (bFailIfMissing == false), HRESULT=80070002 (e:\nts_sms_fre\SMS\common\inc\ccmxml.h,566)]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context=""
type="0" thread="2964" file="ccmxml.h:566">
<![LOG[No condition is associated with the step.]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:776">
<![LOG[Disable: ]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:583">
<![LOG[Start in dir: ]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:591">
<![LOG[Run in attribute: FullOS]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:595">
<![LOG[Timeout: ]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:599">
<![LOG[DefaultVarlist found]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:683">
<![LOG[Variable name: _SMSSWDProgramName]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:724">
<![LOG[Action command line: smsswd.exe /pkg:PSG00190 /install /basevar: /continueOnError:]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964"
file="tsxml.cpp:626">
<![LOG[Adding instruction at 374]LOG]!><time="08:00:04.088+-120" date="06-25-2013" component="TSManager" context="" type="1" thread="2964" file="tsxml.cpp:628">

Hi Jason,
I'm experiencing this problem with Stand-alone (USB) OSD media also. I think others have reported it but not posted extra info to help diagnose - see "Programs not installing on stand-alone media task sequence" thread.
I've seen this intermittently sometimes builds go through fine but it seems sometimes the Install Software action is just forgotten. For example I've just built a PC using a usb key successfully with all programs present. With the same key I've
re-run it and our Firefox package is missing. The only entries in smsts.log for Firefox are in the 'Parsing' sections that you advise aren't relevant plus this bit:-
Deleted setting 'CCM_SoftwareDistribution.ADV_AdvertisementID="{39997A92-226D-4813-B2FB-EEABDDA3D13D}",PKG_PackageID="PUB000A3",PRG_ProgramID="Mozilla_Firefox_17.0.4_p1 Silent OSD"'.
This is the same for both successful and unsuccessful installs of the package. The only difference I can see is that the msiexec log file is created for the successful install but there is no log for an unsuccessful one.
Also the "All Status Messages from a Specific System" report shows the two entries "Program started for advertisement..." & "...completed successfully" only when Firefox installs ok. For the installs where the app doesn't install there is no mention
whatsoever in the report of actions related to Firefox.
Are there any other logs which may help me get to the bottom of this?
With thanks
Jim

DataSource Unavailable ..on console but application is fine....

Similar Messages

Maybe you are looking for