Datasources in APO
Hello, Does anyone know how to create a datasource in APO system? I assume it is different than creating one in R/3.
Thanks,
Hi.....
APO - BW Adhoc Reporting
Steps to be performed in APO client.
(Prerequisite: existing sales cube)
Create Export Datasource for Planning Area :
SAP Easy Access Menu => DP => Environment => Current Settings
=> Administration of Demand Planning and Supply Network Planning
Specify which fields you wish to be selectable later for reporting purposes.
Don´t forget the field ?Version" (/BI0/9AVERSION)
Replicate Metadata
Create Infosource
Assign Source system and data source
Maintain transfer structure and communication structure
Create Remote Cube
Assign Source system
Create Multicube (based on sales cube and remote cube)
Create your reports with BEX according to the your requirements.
In case of APO we use Export datasource.....
Export datasource is used when you want to use BW system as a source system. If you want to send data from one datatarget to other data target within BW system then we go for export data source. right click on the target and say export data source and then go to source system tab
right click on Myselof source system and say replicate data source..then you will find datasource with prefix 8.
http://help.sap.com/saphelp_nw04/helpdata/en/86/cade377806e664e10000009b38f842/frameset.htm
Also check this :APO BW Integration
Hope this helps.....
Regards,
Debjani......
Edited by: Debjani Mukherjee on Oct 20, 2008 2:54 AM
Edited by: Debjani Mukherjee on Oct 20, 2008 3:00 AM
Similar Messages
-
Creation of a web service datasource in APO BW
I am using APO V5, which includes BW V7.
I need to create a 'web service' datasource in APO BW, so that I can receive XML data from XI to update the datasource.
How can I create the 'web service' datasource?... should the 'logical system' be the connected XI system?
Thanks,
Bob AustinYou will require to create source System for Web Service Folder - Where you will require to maintain Logical System Name, Source System Name, Type and Release
-
Datasource on APO Planning Area - Transportation Error
Hi All,
I have created the Datasource on APO Planning Area. Datasource working fine check in RSA3 and also in BW side. when transporting the data source from APO Dev to APO QA i am getting following error and transport fails. Please suggest.
Thanks
Christopher
Execution of programs after import (XPRA)
Transport request : AD1K909333
System : AQ3
tp path : tp
Version and release: 372.04.10 700
Post-import methods for change/transport request: AD1K909333
on the application server: hllsap112
Post-import method RSA2_DSOURCE_AFTER_IMPORT started for OSOA L, date and time: 20080725125524
Execution of "applications after import" method for DataSource '9ADS_PP_APO'
Import paramter of AI method: 'I_DSOURCE:' = '9ADS_PP_APO'
Import paramter of AI method: 'I_OBJVERS:' = 'A'
Import paramter of AI method: 'I_CLNT:' = ' '
Import paramter of AI method: 'LV_CLNT:' = '100'
DataSource '9ADS_PP_APO': No valid entry in table /SAPAPO/TSAREAEX
Planning area for DataSource '9ADS_PP_APO' does not exist in target system
Extract structure /1APO/EXT_STRU100002737 is not active
The extract structure /1APO/EXT_STRU100002737 of the DataSource 9ADS_PP_APO is invalid
Errors occurred during post-handling RSA2_DSOURCE_AFTER_IMPORT for OSOA L
RSA2_DSOURCE_AFTER_IMPORT belongs to package RSUM
The errors affect the following components:
BC-BW (BW Service API)
Post-import method RSA2_DSOURCE_AFTER_IMPORT completed for OSOA L, date and time: 20080725125532
Post-import methods of change/transport request AD1K909333 completed
Start of subsequent processing ... 20080725125524
End of subsequent processing... 20080725125532
Execute reports for change/transport request: AD1K909333
Reports for change/transport request AD1K909333 have been executed
Start of................ 20080725125532
End of.................. 20080725125532
Execution of programs after import (XPRA)
End date and time : 20080725125532 Ended with return code: ===> 8 <===Christopher,
There seems to be no extract strucutre available for this data source in quality. This is creating the problem in quality. The extract strucutre which is created in your scenario would be available in temp folder and that will not be availbale for transport, so you need to have the datasource generated in quality and then you transport the active version to quality so that it will be available with the changes as that of development.
Regards
Vijay -
Infoset as Datasource in APO for BW
Hello Gurus,
Need some help in creating infoset in APO and used it in BW as Datasouce,
I have created a Infoset in APO using T code SQ02.added 4 tables and the genrate.
After that i have replectated in BW source system but this datasource in not reflected in BW.
Can you pleas guide me what i have done is correct or some addictional steps need to be done.
and also some one can send me some documents on infoset in APO or ERP tha would be great help.
Thank in Advance
Regards.Have you created a generic datasource on the infoset you created?
In Generic datasource creation(RSO2) in 'Extraction from Query' option you can give the infoset name and create a generic datasource. This datasource can be replicated into BW by selecting replicate in Sourcesystem.
Regards -
RE : BI APO Question Reg Data feeding from cube to Planning area.
Hi BW Experts,
iam working in an Implementation project for SCM in BW prcisely working with APO Bw..
For that I have taken historical data as a flat file and loaded it in to the external BW Infocube and its fine...
Second step I have created generate export datasource on topr of BW infocube and replicated in to Bw and used this export datasource as datasource for APO BW Infocube which is inbulit BW System from External Bw..
also I have created tranformations and data is loaded in the BW cube in APO system.Also Included Version charecterstics..
When I try to fed the APO Cube data to planning area Iam gettinga the following warning itsnot an error:
1.Key figure copy: InfoCube - planning area (DP) 01.01.2010 to 31.12.2010-- Successful
*2.No data exists for the selection made (see long text*
Diagnosis:Data could not be loaded from the Cube for the selection you made. Check whether the Cube actually contains data that is relevant for your selection.
For the second point I have time charecterstics filled in the infocube which Iam feding to a Planning area like 0CALMONTH,0CALWEEK,FiscVarnt,0CALMONTH
3.Characteristic assignment: No data copied --- Message
Can you please help me with your thoughts so that i wll try to corner the issue I will be highly obligedHi,
As I understood, you have loaded data from external BW cube to APO BW cube and now loading planning area from APO BW cube.
I hope your settings in /SAPAPO/TSCUBE transaction code would be correct and you have selected the correct planning version with correct cube.
Check if Data in APO BW cube is available for reporting or not and data is avilable for given selction (if any but I guess you are not giving any).
Thanks,
S -
PL let me know how to UPLOAD Atributes andTexts from the R/3 to APO RAS1
HI
I HAVE UPLOADED FROM EXCEL IN RSA1, BUT PLEASE LET ME KNOW THE PROCESS HOW TO UPLOAD ATTRIBUTES AND TEXTS FROM R/3 TO APO IN RSA1
IN REALTIME(IMPLEMENTATION) USUALLY HOW THE ATTRIBUTES AND TEXTS WILL UPLOAD INTO THE RSA1 IN APOHi,
Generally this is how the flow is R/3 --> BI --> APO. However since APO also contains the datamarts, you can create datasources in APO as well to read directly from R/3. You can create a table datasource so that it can directly read from the tables in R/3 and load the data into APO.
Hope this helps.
Thanks & Regards,
Mani Suresh -
FOR BACKUP FROM PA TO CUBE IN APO 5.0
HELLO FRIENDS,
I HAVE A SMALL QUERY ,HOW TO LOAD DATA FROM PA TO CUBE
1.CREATE DATA SOURCE IN PLANNING AREA SECEEN
2.CREATE INFO PACKAGE
3.CREATE INFO CUBE
4. CREATE TRANSFORMATION
5. DPT DATA TRANSFORMATION PROCESS
THESE STEPS I HAVE CREATED BUT IAM NOT ABLE TO GET THE DATA TO CUBE FOR BACK UP PURPOSE. I AM WRONG PL CORRECT ME ,GIVE ME UR SUGGSIONS.Sivaram,
Something I found in a BI thread:
1. The data flow is from BW to APO, and from APO to BW.
from bw to apo, to feed planning area, characteristic value combination, in APO we have infocube to feed the data, as we know APO has BW inside (all the tcodes RSA1 etc are valid), datamart scenario is used here, we create infocube in APO, update rules, infosource and assign datasource from BW.
The data flow from APO to BW, to get the plan data inputted by user, we generate datasource in APO from planning area (compare with 'generate export datasource' from infocube), transaction /SAPAPO/SDP_EXTR. 'extractor technology' here in practice is just like when we are using datasource
take a look
http://help.sap.com/saphelp_scm50/helpdata/en/c9/199170f13711d4b2f20050da385632/frameset.htm
2. as mentioned in #1, you can use the transaction /SAPAPO//SAPAPO/SDP_EXTR to handle planning area-datasources in APO, or /SAPAPO/MSDP_ADMIN - planning area; choose your planning area, and menu extractor tools (or generate datasources), again datamart scenario is used here, after the datasource generated in APO, it's replicated in BW (APO act as source system), the rest steps are just same as when extract data from other SAP source system
simply what you need to practice is /SAPAPO/SDP_EXTR to 'generate export datasource',
Check
http://help.sap.com/saphelp_scm50/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm
FOLLOWING IS A VERY USEFUL LINK:
http://help.sap.com/saphelp_scm50/helpdata/en/e0/9088392b385f6be10000000a11402f/frameset.htm
I believe you need to REPLICATE your data sources after generating them. Have you dione that?
Hope this helps,
Abhi -
APO DP and 3.5 BW Query
Hi All,
My boss had a question regarding using a query as a datasource for APO DP.
Is it possible to do this?
I am preparing for a meeting today and want to make sure I have all the information needed to answer questions.
Thank you!
CarolineYes it is possible
create an DataSource for your Planning Area (Transactio
n /SAPAPO/SDP_EXTR) and then use that datasource to Connect it to a RemoteCube, construct a query on
the RemoteCube or
Connect the DataSource to a separate BW server, load the data there (or use a remotecube), and do the reporting from there.
Manish -
How to extract data from APO to BW(not APO's BW)
Hi, expert.
Now I want to extract data from APO to BW (not APO's), what's the data flow.
1. APO datasource----->BW (not APO's) datasource----->BW (not APO's) infocoube
2.APO datasource----
>BW (APO's) -
>BW (not APO's)
I want to create query on the BW not APO's.
Which one is right? or there is another way?
Thanks in advance.Hi Bruce,
If I understand your question correctly your scenario 1 comes closest to a solution:
1) Create/activate Datasource in APO system and test it using tcode RSA3 (assuming it is SAP APO)
2) Replicate the Datasource in BW + create infopackage which will load the data into PSA
3) Create a DSO (if you like a layered approach) and a Cube on top + a Multiprovider above
4) Connect BW Datasource to DSO and DSO to cube (Transformations + DTPs to load)
5) Create a query on the Multiprovider
Hope this helps.
Grtx
Marco -
APO/BW: How to get back from APO to BW/ How the send data from BW to APO
Hi,
1. I read that BW is the data layer for APO DP and therefore, I expected data to flow from BW, the data layer, to APO DP but not the reverse. Yet, I also read that data can be transferred from Livecache back to BW by using the extractor technology from BW. Can you clarify this for me?
2. If possible, please provide the steps to use this extractor technology to extract data back to BW in detail so that I can try it.
ThanksHi Amanda,
1. The data flow is from BW to APO, and from APO to BW.
from bw to apo, to feed planning area, characteristic value combination, in APO we have infocube to feed the data, as we know APO has BW inside (all the tcodes RSA1 etc are valid), datamart scenario is used here, we create infocube in APO, update rules, infosource and assign datasource from BW.
The data flow from APO to BW, to get the plan data inputted by user, we generate datasource in APO from planning area (compare with 'generate export datasource' from infocube), transaction /SAPAPO/SDP_EXTR. 'extractor technology' here in practice is just like when we are using datasource
take a look
http://help.sap.com/saphelp_scm50/helpdata/en/c9/199170f13711d4b2f20050da385632/frameset.htm
2. as mentioned in #1, you can use the transaction /SAPAPO//SAPAPO/SDP_EXTR to handle planning area-datasources in APO, or /SAPAPO/MSDP_ADMIN - planning area; choose your planning area, and menu extractor tools (or generate datasources), again datamart scenario is used here, after the datasource generated in APO, it's replicated in BW (APO act as source system), the rest steps are just same as when extract data from other SAP source system
simply what you need to practice is /SAPAPO/SDP_EXTR to 'generate export datasource', the rest steps should be familiar already for you
check
http://help.sap.com/saphelp_scm50/helpdata/en/8f/9d6937089c2556e10000009b38f889/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/e0/9088392b385f6be10000000a11402f/frameset.htm
hope this helps. -
Hi All,
I ned to add some fields to APO cube. I need to change Data source to.
My doubt is, How is the extraction procedure in APO mean is there any
extractor like R/3. Please let me know.
Thanks,
KNHi,
For Datasources:
Re: APO/BW: How to get back from APO to BW/ How the send data from BW to APO
http://help.sap.com/saphelp_scm50/helpdata/en/c9/199170f13711d4b2f20050da385632/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/e0/9088392b385f6be10000000a11402f/frameset.ht
APO extraction
The presentation.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/integrate%20bw-bps%20and%20apo-dp.pdf
the links:
https://websmp201.sap-ag.de/scm
http://help.sap.com/saphelp_scm41/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
http://help.sap.com/saphelp_scm50/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
APO Documents Required
apo
BW with APO
http://help.sap.com/saphelp_nw04/helpdata/en/db/4774404a6fcf62e10000000a155106/frameset.htm
APO and BW
APO basics
Hope this helps,
Regards
CSM Reddy -
Mdx extraction from fin.reports
Hi
We use a lot of fin.reports for planning purposes and now we have to write mdx query that would model reports
i am just wondering about possibility to get mdx query from financial report automatically somehow?
Regards
Sasha
Edited by: Softperson on 29/4/2010 12:17hi,
we can update bw infocube with planning data within a day, using datamart scenario, we generate datasource in apo for that planning area and replicate to bw, assign to infosource, and feed to bw infocube. steps
- logon scm, transaction /sapapo/msdp_admin, right click your planning area and 'display'(or 'change'
- in next screen, menu extras->generate datasource, given datasource name and click 'V', in next screen datasource screen, check if any 'hidden' should be remove, and 'save'. the datasource will succesfully generated. to test and check etc, menu extras->data extraction tools.
- logon to bw, right click apo source system (create it if you haven't), and choose 'datasource overview', expand 'bw datasources' ->business information warehouse -> datamarts -> right click datamarts and 'replicate datasource'
- create infosource in bw and assign with that datasource
- create infocube and update rules with that infosource and following bw standard steps
hope this helps. -
Error in ListCube for Remote cube - Error in substep
Hi All,
To start with the details, I've 7.0 version datasource in APO and I've created Remote cube / Virtual provider Based on Data Transfer Process for Direct Access with transformation and some routines in rules.
I've also an "End Routine" as shown below
DATA RSLT_PKG_ROW TYPE tys_TG_1.
LOOP AT RESULT_PACKAGE INTO RSLT_PKG_ROW.
RSLT_PKG_ROW-/BIC/ZTEST_QTY = 2.
MODIFY RESULT_PACKAGE FROM RSLT_PKG_ROW.
ENDLOOP.
My list cube runs fine and gives the required data without the above end routine for ZTEST_QTY.
when I add the above code in my end routine for populating data for ZTEST_QTY, it is throwing an error message
Error reading the data of InfoProvider
Error in substep.
someone please throw some light on this.
Thanks
KIModify your code to this:
CONSTANTS: c_2(1) TYPE n VALUE 2.
LOOP AT result_package
INTO <result_fields>.
<result_fields>-/bic/ztest = c_2.
ENDLOOP.
Since the FIELD-SYMBOLS of <result_fields> has been automatically declared in the End Routine, there's no need to define a work area and modify the internal table with the data from the work area. -
Hi all,
I have a report in which i have to view all actual sales for the past 4 years.
I have 0CALMONTH and sales history on Columns and i have product and 0CALYEAR in Rows. and the report is as shown below
01/2002, 02/2002....12/2002,01/2003....12/2003
2002
2003
but i want to get the report to show
Jan , Feb, March.....Dec
2002
2003
Can any one help me out with this.
Thanks in advance.I am working in BW APO (I am new to APO)this cube which i am working on will get data from Live Cache.
There is one Unique menthod of create Back up Cube and datasource in APO.
When you say 0CALMONTH2, should i have to created one time char taking 0CALMONTH as reference and include in the model.
This are the steps which i did
New structure, new selection and selected 0calmonth and the key figure and then created text variable which is processed by replacement path as you specified in the previous post.
When i did this i was not able to see even the months (01/2002, 02/2002,....)which i was seeing without the structure.
Please currect me if i have done anything wrong.
Thanks in advance
Vasanth -
Hi,
Please explain me the settings/configuration to load the data from R/3 to APO.
If I am not wrong ,we give path name in info package if the data is to come from flat file. What about data from R/3?
Thanks,
Prabhat SahayHi Prabhat,
you can choose the option for R3 data source in transfer rules in Infosource and then assign the required R3 data source to infosource. It is advisable to replicate the R3 datasource in APO BW also.
yes, you are correct, if you would like to load the data from a flat file then you need to choose the option of flat file in transfer structure of infosource. Also ensure the data needs to be in the same sequence as the KF sequence defined in Infosource.
Let me know if it helps.
Regards
Gaurav Mathur
Maybe you are looking for
-
IMessage Doesn't work all the time. My phone sends messages as text through AT
I don't pay for a messaging plan, so every time my texts don't go as an iMessage it cost us $. Both sending and receiving. We use an iPhone 4 and a 4s. Is this an Apple issue or a carrier issue? Thanks, Kris
-
Hi Im having a problem discovering any queues with the MSMQ management pack. The servers are discovered fine as MSMQ 2008 R2 servers. Im wondering if the problem is with the run as accounts. The servers are not on a domain so ive created two Windows
-
OBIEE11g Enterprise install Linux-64 - Error in Creating ASInstance failed
HiAll, I am trying to install OBIEE 11.1.1.5.0 Enterpise install on Linux-64 bit system. It got failed at "Configuration Action : Creating ASInstance has failed " Can anybody help me here. Note: RCU step is done already.
-
Connecting a hardware mixer to work with Logic
Hi, I'm really keen on the idea of using an analogue mixer to work in conjunction with Logic. But is it even possible to connect Logic and a Mackie 1642 vlz3 via an iMac? Nick
-
Where is the Crystal Reports formula reference zip file?
I am just getting started in Crystal Reports and I have seen a reference to cr8_formularef.zip. This file is supposedly contains all the functions and operators in Crystal Reports. But, when I do a search for it here, all I get is a reference in the