DataStore Objects cannot be activated

During installation of FI-GL BI content, error below is encountered. As a result, all standard ODSO can't be activated. Customized datastore objects cannot be activated as well. InfoCube, multicube and other objects (except DSO) are working fine.
Wonder how to fix this issue. Would appreciate much some help.
Thanks.
sofie
The creation of the export DataSource failed
Message no. RSBM035
Diagnosis
The system could not create DataSource .
System Response
The metadata for a DataSource must be created while the export InfoSouce is being generated. An error occurred at that time.
Procedure
Consult the appropriate developer (function module: RSA1_OLTPSOURCE_GENERATE).

Hi Dhanya,
Thanks much for suggestion.
Hi Sreekanth,
I have indeed checked RFC connection of BI to ECC. Anyways, have followed your idea and generally it worked. However, after fixing the RFC connection and having a "OK" status Check for BI self connection, error below is encountered upon DSO activation.
Basis is trying to fix the issue. In any case, perhaps last option would be to delete source system and recreate.
But if you have some thoughts in mind how to fix without deleting BI self source system, would really appreciate it.
Thanks a lot.
sofie
Transfer structure prefix for source system T90CLNT090 is not defined
Message no. RSAR325
Diagnosis
A prefix is defined for the source system for determining cross-system unique transfer structure names. This prefix is not defined between your source system T90CLNT090 and Warehouse T90CLNT090. There was probably an error when creating the source system.
Procedure
If you have not yet loaded data from this source system, delete the source system and then recreate it.
If the problem occurs again, check the SAP Support Portal. Create a new problem message, if necessary.

Similar Messages

Error while activating DataStore Object

Hi Experts,
I am using standard DataStore Object(0FIGL_O02), but while scheduling the laod for it its giving me error:
"DataStore 0FIGL_O02 built incorrectly; cannot update request REQU_432B1OBKPHR2X8JKALGN0UZLE(617)"
My DataStore Object is active, but when i am trying to actiavte it again its going for dump but all the other ODS are working fine, does anyone faced the same problem?
Below is the dump:
Error in the ABAP Application Program
The current ABAP program "SAPLRSDG_MDOB" had to be terminated becau
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_RSTRAN_TRFN================CP " in include
"CL_RSTRAN_TRFN================CU " in
line 159:
"Implementation missing for method "GET_INFO_VERS". "GET_INFO_VERS"
Message was edited by: SAP BI

Are you using transformations/DTP to load the DSO??
I am not sure if this helps
Note 961556 - DataStore (activation): Columns are initialized without rule
Note 974833 - DataStore (activation): Columns initialized without rule
Hope it Helps
Chetan
@CP..

Problem in activating data in datastore object

Hello,
I have an issue while activating the data in Datastore Object.
I have been trying to load the data to cube 0FIAP_C02. I am going to write down all the process I am doing, so you will have a clear picture and advice me accordingly.
1.)Installing Business content (Cube, Datastore objects, Infosources,
Transfer strcuture and Transfer and update rules) ( 0FIAP_C02, 0FIAP_O06, 0FI_AP_1 and 0FI_AP_6 (infosources)
2.)Replicate the datasources from the R/3 side to BW side (the
datasources are replicated as 3.x)
3.) Create transfer rules and transfer structure.
4.) Create Infopackage for loading data to PSA.
Datasource 0FI_AP_1 -> Full Upload.
Datasource 0FI_AP_6 -> Init. Delta Load.
Load data for both the datasources.
5.)Migrate the 3.x datasources to "Emulated datasources". Create
Transformation between Datasource 0FI_AP_1 and cube 0FIAP_C02, also
create transformation 0FI_AP_6 to Datastore Object 0FIAP_O06.
Create DTP's to load the data from PSA to data targets.
Now is my problem,
1.)I am having errors while activating the data in ODS. (It says that errors occured during the activation of data but I cannot see an error log or anything of that kind.) I can load the data and it gives me green light but when i try to activate it gives errors.
2.)A follow up question of the activation of data is does this data goes and sits in PSA of the data mart 80FIAP_O06.And then do we have to create transformation/DTP from Datastore Object to cube (0FIAP_C02) or we are going to use the Business content transfer rules and Load the data by Infopackage.
Thanks,
Kiran Mehendale.

Hi Kiran,
ad 1.) You most likely have to open a customer problem message. Maybe you try to elaborate on your issue (problem message, etc.) and we can try to assist you.
ad 2.) You can create a DTP from one persistent storage object (PSA, DataStore Object, InfoCube, etc.) to another one. Hence you can also create a DTP for DataStore Object --> InfoCube.
Cheers
SAP NetWeaver 2004s Ramp-Up BI Back Office Team

Error while activating data loaded into DataStore Object in BI 7.0

Hi Guys,
I am facing the following problem :
When I load data into a Datastore Object, all the records get loaded but the job fails during activation of the data.
Below is the job log :
Activation is running: Data target 0RPM_DS07, from 77 to 77
Overlapping check with archived data areas for InfoProvider 0RPM_DS07
Check not necessary, as no data has been archived for 0RPM_DS07
Data to be activated successfully checked against archiving objects
SQL-END: 14.06.2007 12:33:25 00:00:00
SQL Error: ORA-20000: Insufficient privileges
Parallel processes (for Activation); 000003
Timeout for parallel process (for Activation): 000300
Package size (for Activation): 020000
Task handling (for Activation): Backgr Process
Server group (for Activation): No Server Group Configured
All data fields updated in mode "overwrite"
Resource error. No batch process available. Process terminated
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Request you to kindly help me resolve this issue.
I am runnning the infopackage manually. Should I run it by a process chain??
If I run by process chain, I get the following error in 1st step:
You do not have authorization for InfoSource 0RPM_ITEM_FIN_PLANNING.
Awaiting your replies,
Thanks,
punkuj...

Hi,
I think this problem remains unanswered.
The issue behind this problem is, during parellel activation the child jobs acknowledge the parent job about status. If the child job takes long time to read data from active data table, then it times out and fails.
Check the primary index on Active data table and it should be missing in your case. See the se11 index or db02 missing indexes. That is the reason that causes time out. Rebuild the primary index by asking your basis folks and repeat the activation. It should succeed.
Thanks,
Sri.

Error activating DataStore Object

Hi
I have created a DSO and put in some key fields and data fields.
During activatation, I encountered the following errors. Pls help !
Internal error occurred when writing..
Error while saving change log for DataStore Object..
Error during creation of DDIC sources of DataStore Object...
Thanks !

Hi M
I can only locate this link
SPRO>SAP REFREN IMG>SAP NETWEAVER> BUSINESS INTELIGENCE
I cant find the following option !
SET THE PARAMATER SETTINGS FOR DSO
I then went to SPRO>SAP REFREN IMG>SAP NETWEAVER> BUSINESS INTELIGENCE>Performance Settings>Maintain Runtime Parameters of DSO
I try to do some settings but I cant even locate my DSO since it is not activated.
Pls help, tks.
Edited by: Lay Tin Koh on May 9, 2008 10:22 AM

Error while activation the Datastore Object

Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
Yash

Hi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish

0FIA_DS11:Error when activating DataStore Object

Hi,
We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
We have replicated the datasources 0FI_AA_11 and 0FI_AA_12 in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given error.
" DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIA_DS11 "
We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
System is BI 7 with EHP4 ehanced packege.
Please suggest.
Thanks & Regards,
SMS

Hi Jonas,
I understand the procedures and had followed all the procedures.
We had resolved the issue and issue was with the IP in sm59.
It is cleared.
Thanks for the reply.
Regards,
S M S

Error when activating DataStore Object

Hello,
We have an ODS object which is in avtive stage in ECC DEV system. When
we transport it to ECC QA system it can not be activated and shows
follwoing errors :
1) Internal error occurred when writing
Message no. D0054
2) Error while saving change log for DataStore object DSO_PL
Message no. RSDODSO196
3) Error during creation of DDIC sources of DataStore Object DSO_PL
Message no. RSO435
4) Error when activating DataStore Object DSO_PL
Message no. RSO404
We also observe that even we create new ODS object in ECC QA system,
still it give the same errors while activating.
Note - ECC QA is a system copy of ECC PROD.
Please suggest.

Hi,
I believe the problem is with the Myself connection (the BW source system connection to itself) in the QA system.
Please goto RSA1, 'source systems', right click on the myself system and click on 'check', if there are errors you
maybe able to correct them by right clicking on the myself connection and click on 'restore'. If there are no
errors for the myself connection you should go to sm59 and do the connection and authorization test for the
RFC connection for the myself connection.
Best Regards,
Des.

Cannot find the object "CrossRef" in Active Directory

I am trying to install Lync 2013. I'm getting the following error: Error:
An error
occurred: "Microsoft.Rtc.Management.Deployment.ActiveDirectoryException" "Cannot
find the object "CrossRef" in Active Directory."
WARNING: Enable-CSAdForest failed.
This error is at "Step 3: Prepare Current Forest" of the install.

I've tried to run the forest prep as a local domain and I get the following:
Creating new log file "C:\Users\administrator.xxx\AppData\Local\Temp\2\Enable-CSAdForest-052cfe14-7f42-4969-88da-83279413ab8c.xml".Enable the Active Directory forest to host Lync Server 2013 deployments.
Prepare Forest Active Directory settings execution failed on an unrecoverable error.Creating new log file "C:\Users\administrator.xxx\AppData\Local\Temp\2\Enable-CSAdForest-[2013_05_30][13_25_56].html".WARNING:
Enable-CSAdForest failed.WARNING: Detailed results can be found at "C:\Users\administrator.xxx\AppData\Local\Temp\2\Enable-CSAdForest-[2013_05_30][13_25_56].html".Command
execution failed: Container CN=Microsoft,CN=Program Data,DC=xxx,DC=local not found

Exchange Connector 3.0 (Hotfix Release) Error - Error Message=The key value of an object cannot be changed.

Hello,
I am running Service Manager 2012 with the Exchange Connector 3.0 RTM (Re-release Version). The issue I have is that when an e-mail is processed that is trying to update the status or event log of an incident, the Exchange Connector encounters an error
and will not update the object. The Operations Manager log denotes:
Exchange Connector: Unable to process mail item. Subject="Close Ticket: [IRXXXXX]", Error Message=The key value of an object cannot be changed.
This will happen on a seemingly random selection of Incident work items. I cannot correlate them with a specific template, exchange connector, or incident tier queue that could be causing the issue. I can recreate the way a specific ticket
was created and update it through e-mail without issue, and the next ticket can cause the error to trigger.
I have already opened a Microsoft Support Case using our Software Assurance agreement. After a few months of troubleshooting the issue and trying different fixes, Microsoft support said they were unable to fix the problem and that we would need to
purchase Premier support to go further. At this point I thought I would reach out to the community for ideas.
The setup I have for the Exchange connectors is as follows.
I have three separate Exchange connectors set up to three different mailboxes. One Exchange connector processes external support tickets and applies a specific template. Another processes client support tickets and applies a different template.
And the last Exchange connector processes internal tickets and also processes the updates of tickets created by the other two exchange connectors.
Here are the fixes I've attempted so far:
1. Changed the templates that each Exchange connector applies.
2. Changed the management pack that each template is stored in.
3. Checked my management pack(s) for extended classes by searching for Extension="true" (This was also checked by Microsoft support)
4. Deleted each Exchange connector and recreated each connector
5. Deleted each Exchange connector, deleted the management pack, and reinstalled the management pack and connectors
6. Repeated Step 5, deleted Microsoft.SystemCenter.ExchangeConnector.dll and Microsoft.SystemCenter.ExchangeConnector.resources.dll and then installed the Exchange connector Re-release version 3.0 Published 10/7/2013 (which is supposed to address this
issue)
7. Deleted the HealthServiceState folder and restarted the Management Service
I'm not really sure what to do at this point. I've put many hours into customizing my installation to get it working for my organization so reformatting and starting from scratch would be a nightmare scenario. This environment is in production.
I do have a band-aid in place using Orchestrator. Basically I have a monitor task searching for the error message and when it finds one it searches the mailbox for the offending e-mail and applies either the Resolve or Close status change that is requested
from the user. However, I do not have it working to update the ticket if a comment is applied to the incident. If anyone is in this position and needs to know how to apply this Orchestrator task I am willing to provide my workflow.
I am new to the community and am already impressed with the amount of help and effort there is in this forum. I appreciate in advance any help that is provided and am open to any ideas at this point. I can post more information as needed.
Thank you,
John

Yes that is the whole template. However, I did confirm that this is only happening to incidents where either of two situations triggers a runbook to fire and modify the incident. When I remove the activity from the incident it does clear the
issue. For some background the first Runbook Activity set's the first response date when an incident is resolved if the first response value is null. The second assigns the incident to a user upon creation if the title contains assignto:username;
1.)
<ObjectTemplate ID="Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>Get RA Guid</Name>
<Id>344b15effc1a44528e517c5b4227179c</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1906</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Library!System.WorkItem']/Title$">Set First Response on Resolve</Property>
</Object>
</ObjectTemplate>
2.)
<ObjectTemplate ID="Template.b311e1f9126e4e19bbbbeb65ddb220ba" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Status$">$MPElement[Name='CustomSystem_WorkItem_Incident_Library!IncidentStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
<Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">ca88b13b-861a-4d39-a3cb-fd912d951e35</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.b311e1f9126e4e19bbbbeb65ddb220ba</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
<Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$"><?xml version="1.0" encoding="utf-16"?>
<ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<ParameterList>
<RunbookParameterItem>
<Name>RA Activity GUID</Name>
<Id>5677d117a0294a2c898a695032f26c72</Id>
<Type>String</Type>
<Value>Generic::Id</Value>
<Direction>In</Direction>
<ContextInfo />
</RunbookParameterItem>
</ParameterList>
<RunbookId>ca88b13b-861a-4d39-a3cb-fd912d951e35</RunbookId>
</ParameterMapping></Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1120</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
<Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
<Property Path="$Context/Property[Type='WorkItem!System.WorkItem']/Title$">Execute Orchestrator IR - Autoassign</Property>
</Object>
</ObjectTemplate>

Errors in datastore object in BI 7.0

Hi Guys,
While loading data into the Datastore object i am getting the following errors:
Getting the records into the NewData Table but not into the Activedata and Changelog Tables.It wa showing the errors like this:
Activation of Data / 26.02.2007 / 18:17:34
Main Process
Time limit exceeded. No return of the split processes
Resource error. No batch process available. Process terminated
Resource error. No batch process available. Process terminated
SID Generation
Data Package 000001
Resource error. No batch process available. Process terminated
Pl send me the solution for this.I need it imdtly.
Points will be awarded
Thanks,
Chinna

Hi
try to activate your ODS manually..there could be some batch processes(for background) and some update programs..when you are doing it in background you are getting that error i think..do it manually..
Hope it helps
Thanks
Teja

Queue is registered and cannot be activated

Hi all
we have an R3AD Queue problem. " The queue is registered and therefore cannot be activated"
The status of the queue is "RUNNING".
When I try to acitvate it gives message " The queue is registered and therefore cannot be activated"
Can anyone help me out in this case..

Hi Harry,
Check if this is useful.
Maintain the following parameter using transaction SM30 (table maintenance) for table SMOFPARSFA:
Key : R3A_COMMON
Parameter Name: CRM_DO_NOT_REGISTER_INBOUND_QUEUE
Parameter Value: X
Caution:
This parameter has the effect that the queues R3A, CSA, CRI* or "CDB*" are no longer registered automatically. Ensure that all required objects are registered.
Award points if useful.
Thanks,
Ravi

BAM: Data objects cannot be edited while they are in use.

Hi all,
When I try to edit the layout of an data object I'm getting the error: BAM-04003: Data objects cannot be edited while they are in use.
I have the Active Viewer and Studio closed.
How can I do this?
Thank you in advance.
Kind regards,
CD
Note: Oracle BAM version: 11.1.1.3

Plans are not supported in 11g. Look if there are any alerts are defined on the data object that you are trying to edit.
Go to BAM Architect - Alerts page
or Go to BAM ACtiveStudio - Alerts tab.

Workflow definition of task 'WS90123456' cannot be activated

Hello Experts,
I am trying to activate a workflow on document event change, and i am getting this error in the event trace: Workflow definition of task 'WS90123456' cannot be activated
In the receiver data i have:
receiver type : ws90123456
object key:
receiver fm: SWW_WI_CREATE_VIA_EVENT_IBF
rfc destination:
check fm
receiver type fm:
message: Workflow definition of task 'WS90123456' cannot be activated
any ideas as to why this is happening ?
The workflow has no errors and it is being generated correctly with no warnings and no errors
points are awarded,
regards

Hi
Go to SWDD and activate the workflow template. Then go to SWU_OBUF and refresh the buffers, and then refresh the org environment using the option in SWUD-->Problem:Workflow Does not start menu path. Test your event again
If still no joy goto SWUD go to Test Environment and select simulate event taking note of the messages code displayed.
Regards
Gareth

JSF- view with no key-attributes cannot be activated

Hi,
i have a view Called Globals with 2 transient varibales , when i open many sessions at the same time and work with them , i got error
JBO-30003: The application pool (model.PlacingModuleLocal) failed to checkout an application module due to the following exception:oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-25052: ViewObject Globals with no key-attributes cannot be activated!
each attribute of the view have
Updateable = Always
Queyable is Checked
Passivative is checked
in the view properties, tab Tuning => No Rows
and "Fill Last Page " and "Passivate State " and "Including All Transient Variables"
all the 3 are checked
the view is NOT based on Entity Object
i use this view for holding data from SelectOneListBox
should i modify the view by any way ?
By The Way this view is exactly the same in SRDemo
Any Suggestions?
thanks....

hi,
answer is here
http://www.oracle.com/webapps/online-help/jdeveloper/10.1.2/state/content/navId.4/navSetId._/vtTopicFile.bc4jjavadoc%7Crt%7Coracle%7Cjbo%7CCSMessageBundle~html/
and it says
JBO-25052: JboException
Cause: A ViewObject with no key attributes has transient passivatable attributes. This type of ViewObject cannot participate in passivation/activation.
Action: Set one or more attributes as key attributes for this ViewObject
that means that SRDemo may have a little bug which is any attribute should be key attr in Globals view

DataStore Objects cannot be activated

Similar Messages

Maybe you are looking for