Datastore without reporting in Bex

Hi all,
With 3.x ODS we can choose the "Reporting Bex" option to hide an ODS into Bex. It was essentially performance, but also useful for reporting.
Now in 2004s, with the 3 different types of Datastore, we cannot have the same functionality.
Is there any other solution to hide Datastore into Bex ?
In the same way, is there any solution to hide different master data's attributes ?
Best regards

Hello,
now we have the option
"SIDs Generation upon Activation"
see Definition:
With the Generation of SID Values indicator you determine whether SIDs are generated when the data in the DataStore object is activated. If the indicator has not been set, no SIDs are generated and the activation process is completed in less time.
Note:
In NW2004s, queries based on DataStore objects can also be made if no SID values were generated during the activation. However, this reduces the performance of the query because the SID values are generated at runtime for the requested data. We recommend, therefore, that this indicator is always set, particularly if you want the query to be as efficient as possible.
The Generation of SID Values indicator has replaced the BEx Reporting indicator in BW 3.x.
As far I know, you can not hide a DataStore.
The only possible way I see is to put the DataStore in special InfoAreas.
Hiding a Attribute is not possible.
Best,
Michael

Similar Messages

Crystal Reports with BEx Query using Custom Exit Variable

Hi,
We have BW BEx Query using Customer User Exit variable to derive the Fiscal Week for Last Year (called it VAR2) based on another user input variable Current Fiscal Week (called it VAR1).
VAR2 is derived from VAR1 in CMOD via some codings and thus it DOES NOT have the "Variable is Ready for Input" flag ticked in the BEx. VAR1 is user input variable, so it has "Variable is Ready for Input" flag ticked in the BEx.
When we create a Crystal Reports with the BEx Query using variable VAR2, and when we run it we got an error message saying "Failed to execute query; '[]<java.lang.UnsupportedOperationException: No Selection State Support!ZP_MI_LYPUBWEEK>'. Redesign your query or contact the data source maintainer to solve the problem". (note: ZP_MI_LYPUBWEEK is VAR2 in this case).
Could anyone please assist? Surely, CR supports BEx customer user exit variables like the above, right?. I also refer to the forum below as it seems to have a similar issue (except mine with an error message), but it does not provide a solution in it.
Crystal Reports with BEx Query using Custom Exit Variable
Thanks,
Andy

Hi Vibhav,
We have the SAP Crystal Reports for Enterprise XI4.0 Version 14.0.0. Not sure if SP0 or other SP, got to check with Basis Team later.
We tried that "mandatory" option and did not work either.
Anyway, SAP has now come back again saying it is something they will fix it in next release/version. We got a phone call from them and a reply below to our OSS.
23.08.2011 - 08:20:49 CET - Info for Customer by SAP
I have raised this issue on the Idea#s Place as an enhancement request
on the below link:
https://cw.sdn.sap.com/cw/ideas/5586
This ER contains the information of including the customer exit
variables in the report without checking the #input for ready# option.
This ER can be considered for being implemented in the future
versions. You can refer to SAP Note: 1515837 - How To: Enhancement
Request Process - "Idea Place" for more information regarding the Idea
Place.
Cheers,
Andy

Creating webi/crystal report on BEx and retrieving data, an error ocured?

Hi Experts,
I have a problem which many couldnt able to provide a better solution and solve it.
Need your expert solutions.
Installed SAP BI with BO(R/3) integration kit SP3.
Created WEBI report on BEx report via Universe. While trying to load/ refresh/ retrieving the data for display it is throwing an error message like the mentioned below.
Query1: UniverseOnSAPBEx2
A database error occurred. The Database error text is: The MDX query SELECT { Measures.ZPrice } ON COLUMNS, NON EMPTY CROSSJOIN( ZVNAME.LEVEL00.MEMBERS, ZVID1.LEVEL00.MEMBERS) ON ROWS FROM $ZICTEST failed to execute with the error.
UNKNOWN error. (WIS 10901)
Some fields in the Cube/ BEx/ Universe/ WEBI that i have used are ZPrice, ZVendorId, ZVendorName etc.
Regards

looks like it could be the same issues as your other post.

Report on BEx query with 2 structures (one in rows and one in columns)

Hi, experts! I have to make Crystall report on BEx query with 2 structures, one in columns (with KF's), and one in rows. Is it possible to create such report? Because when I create such report, I cant see fields in structures, only characteristics fields.
Ok, I found samr problem in another thread. Sorry.
Edited by: Mikhail Sychev on Dec 5, 2009 9:53 PM

Hey Flora,
Happy to hear that its working now.
Answering your question, again its upto the connection and report format you are using. Based on your question i hope you your report output should be like this.
You cannot map to two labels for the series, again this report format is possible only in cross tab through Webi. I would suggest you to concatenate the material and month in a dimension in webi like below.
I have done the concatenation in excel level, i would suggest you to do that in webi. Try to reduce the formula as much in excel.
or
If you are using Query browser connection, then i would suggest you to create a separate report which will display the actual vs plan material wise, here you need to pass the material as a prompt.
Hope this helps in clear, please revert me for any clarification.

Error while connecting executing a webi report from Bex query.

hi all,
i need to create one webi report fron Bex query based on sab BW.
But when I execute the query its shows "Unspecified error invoking method or accessing property "on change DocID"".
i didnt get this msg.
please help

Hi Mohit Gupta,
Degrade the java version to java 7 update 45 and also degrade the java security level to low from medium. Also delete the java temporary files and also clear your IE browser cache as well.
This solved the issue for me.
Thanks,
Chaitanya Krishna

Error when executing a report in Bex analyzer"

Hi all ,
when I am executing a report in Bex analyzer and selecting a hierrachy and execute the report it is giving an error " in Program CL_RSR_RRKO_HIERARCHY and Form SEL_TO_SELDR_EQSID.Any reason for this.
thanks
Rao

Hi,
go to RSSM and give your infoprovider name and check the authrization objects which are present in the infoprovider ...it will have option ticked.
Basically authorizations are based on company code or sales org.
give that authorization object in the first option in RSSM and check on which infoobject it is based.
Also you can give your user id in one of the option in this transaction RSSM and then you can check for that authorization object do you have any values present for the included infoobjects or not.
You will not have those values entry here in the authorization object for those selections which you are giving during the report run.
Just change the vales here and give the desired value for which you are running the report.
Save it.
Hope it helps
Thanks
Message was edited by:
Ajeet

Report in BEx Analyzer shows Red "X" in records field

Dear Experts.
Report in BEx Analyzer us showing red "X" in the records field. Although there are figures in the field and is getting calculated in the overall result, but still the numbers donot appear.
Kindly advise how to fix this.

Please detail the KF formulae here..
Any value divided by 0 is not defined.
So if formula if its using division , you must use not div by 0 function. i.e.NDIV0 function
Edited by: SKDDON on Oct 13, 2009 10:13 AM

Error when trying to generate a report using BEX Quesry in Crystal Reoprts

HI Experts,
As per the SAP NOTE we did FP 2.6 Unicode Transports and then SP3 transports. Transports are imported with min Errors.
Now *when am trying to generate a report using BEX Quesry in Crystal Reoprts* am getting error
"Database Connector Error: BAPI Error #:0
Error occurred when starting the parser: timeout during allocate /CPIC-CALL: 'ThSAPCMRCV' "
*When trying to Generate using OLAP CUBE Report Wizard. AM getting Error*
" READING OLAP META DATA FAILED."
Thanks,
Bharath

This is not really the correct forum to be posting Reports issues. However, if I were to guess, your issue is likely related to the known issues related to installing FMw11R1 on machines which had IPv6 enabled. In most cases, disabling IPv6 would correct the problem, however some issues were not resolved even after disabling IPv6 post-install. I would recommend patching to WLS 10.3.6 and FMw 11.1.1.6 as these versions include fixes for all of those issues as far as I recall.
Consider referring to this MyOracleSupport document if you have access:
Steps to Maintain Oracle Fusion Middleware 11g Release 1 (11.1.1) (Doc ID 1073776.1)

Print SSRS Server Report in landscape or portrait mode directly(without report viewer control)

Hello,
.Net 4.0\VS2010\C#\ssrs 2008 on Sql Server 2008R2
Having a problem printing a Server report while controlling the orientation and the size of the emf rendered to the physical page.
I have the report cutting off in both landscape and portrait modes. I'm passing the following deviceinfo to the render function:
string DeviceInfo =
@"<DeviceInfo>
<OutputFormat>EMF</OutputFormat>
<PageWidth>8.5in</PageWidth>
<PageHeight>11in</PageHeight>
<MarginTop>0.25in</MarginTop>
<MarginLeft>0.25in</MarginLeft>
<MarginRight>0.25in</MarginRight>
<MarginBottom>0.25in</MarginBottom>
</DeviceInfo>";
return DeviceInfo;
string mimeType; string fileExtension; Stream pageStream = serverReport.Render("IMAGE", deviceInfo, firstPageParameters, out mimeType, out fileExtension);
No other settings seem to have an affect on controlling the output to printer or pdf. i.e. The deviceinfo params fed to server report's render function are all you get. I think my original code comes from an MSDN or CodeProject example. I'm not
inventing anything new here.
Links below indicate similar problems but they are looking at the issue from just landscape mode. Seems like I ought to be able to squash or expand the image to whatever size I specify, separate from the 'page' size. Please let me know what i need
to know to make these reports print without bleeding onto 2 pages or slicing off the right side of the document image.
http://stackoverflow.com/questions/25652415/cant-print-ssrs-rdlc-report-in-landscape-mode-directly-to-printer-using-suggest
https://social.technet.microsoft.com/Forums/sqlserver/en-US/06a9b432-c8a5-4952-a07c-867742a26c47/print-rdlc-without-report-viewer-either-in-portrait-or-landscape?forum=sqlreportingservices
print ssrs rdlc report in landscape mode directly
Thanks!

Hi
FraterJoanni,
Thanks for posting in MSDN forum.
I am not expert in SSRS. You should get better response in SQL Server > SQL
Server Reporting Services, Power View forum.
After take a look at the similar threads links as you posted above.
The conclusion is we needn’t tell the program o this report is landscape not portrait. If the width is larger than the height, the report will be printed in landscape; otherwise, it will be printed in portrait.
>>Links below indicate similar problems but they are looking at the issue from just landscape mode.
But in C# forum, we only from the point of code, code looks OK to me.
A similar blog talking about this
Controlling Page Size in a Reporting Services Report
And I have got the default page size in the US is Letter, 8.5in x 11in. In other parts of the world A4 (8.3in x 11.7in) is the standard.
65: //build the device settings (A4 8.3 × 11.7)
66: string deviceInfo = string.Format("<DeviceInfo><PageHeight>{0}</PageHeight><PageWidth>{1}</PageWidth></DeviceInfo>", "11.7in", "8.3in");
67:
68: //get report bytes
69: result = rs.Render(format, deviceInfo, out extension, out encoding, out mimeType, out warnings, out streamIDs);
70:
Best regards,
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BI content to view reports in BEx and Portal

Hi,
I want to install all the BI content related to Query and Reporting.
Can you pls help how to proceed with this like what and all I need to activate.
My requirement is to generate all the reports on 'Vendor Evaluation (from ERP) and 'Tender Evaluation (Bidding Engine) from SRM'..customers should see all the reports in the Netwever portal and as well as in BEx.
Pls help ..
Also I am quite confused with the words :Web Template & BEx web item and BEx web item and Web item..
To view the reports (in BEx and portal) which are extracted from ERP what and all we need to activate?
To view the reports (in BEx and portal) which are extracted from SRM what and all we need to activate?
Please help in this regard..
Regards
Sharif.

Hi Praveen,
Thanks for your immediate response..
My requirement is that I will have to develop reports on Vendor Evaluation from (SS is ERP) and Tender Evaluation (Bidding Engine : SS is SRM)..
To develop the reports for both of the functionalities in BI and to view them in excel mode and in the potal,what is the BI content which I need to activate in BI? -- This is my question.
Whether we need to activate Web template alone or Web template and Web Item both?
In case we need to activate both then which of the following shoud I activate
Either Web Item or BEx item
Web Template or BEx web template
Please provide me the necessary information..<REMOVED_BY_MODERATOR>
thanks in advance..
Regards
Sharif.
Edited by: Pravender on Sep 22, 2010 11:05 AM

Procurement Period wise Reports in BEx?

hi,
i have 2 reports to create in BEx.
1. period wise report.
User been able to enter the fiscal period,and after execution of the report in Bex analyzer it should display the Period 05 and the values for that particular period and if we change it to 04 and it should display Period 04 and the values.
could you pl provide me the solution to create variable for my requirement.
regards
vadlamudi

Hi,
Create a User Input variable with Selection Option Mandatory / Optional and restrict the variable to FiscalYear/Period globally in free characteristic.
Once you do so, based on the input you will be able to get the output. If you give more than one period as input, drill down the fiscal year period across in output you will get the desired result.
Hope this helps

Reporting tools for the Business user - Crystal reports or BEx tools ?

Hi,
We have recently implemented BI/BO infrastructure. Scope of the inital implementation was an executive dashboard based off COPA data. We have used Xelcisus for dashboard and BEx tools for query design etc.
We would like to set up some of our key business users (analysts in respective functions) to be able to write their own queries off this COPA cube. The discussion point is whether to roll out Crystal reports for business users or have them trained on BEx tools i.e BEx query designer/analyzer.
Any inputs to my question "Crystal Reports or BEx tools for the Business users - pros and cons", is appreciated.
Thanks,
Girish

Our user currently do not have anything. It's fresh implementation. We would like to get the business users involved. The question is - what's the best start for a business user - Crystal Reports or Bex ?

Created Webi report using BEx Query.

Hi All,
I am going to upgrade in BW and using BEx & Webi Report. I have created webi report using BEx query. Now I need to test data in webi report.
Can anyone tell me how to test data?
Regards,

Hi,
compare the webi report data with Bex report. more you can compare webi report with SAP R3 system for random records.
Thanks,
Amit

Calling ABAP report from BEx query

Good day!
I want to call ABAP report from BEx query by right-clicking on the field and using context menu. I know that transaction RSBBS is used (sender-receiver connecting), but I don't know how to transfare data to ABAP program
In ABAP program I want to know at least data from those cell in BEx query, that was right-clicked.

Depending on your requirement and environment, you have the following options:
1. Use an info spoke and make selections as you would in a query.
2. USe FM RS_VC_GET_QUERY_VIEW_DATA_FLAT to send the data to a file and your ABAP can read this file.
Ravi Thothadri

How to report in bex

Hi all,
How to prepare reports using bex.
please send to:
[email protected]

Hi,
Please try this link
http://help.sap.com/saphelp_sem40bw/helpdata/EN/ba/45583ca544eb51e10000000a114084/frameset.htm
Hope it will be helpful to you

Datastore without reporting in Bex

Similar Messages

Maybe you are looking for