DataTip box to appear near the plot for Plot Chart

Hi,
I am using a Plot chart.
I use three Plot series for the chart.
I show the plots for one series at a time.
When I show the Data tips for each plot, I am getting a long line connecting the plot & the DataTip (as shown in attachment).
I would like the DataTip box to appear near the plot.
How to accomplish this ?
- Sen

The bottom line is that it does not work reliably, Tim.
I had occasion to scan old Kodachrome slides (2x2" in cardboard mount), and placed identifying markers with "Talk Bubbles."
Open your picture file
Access the Custom Shape Tool (U). On the tool's option bar at the top next to "Shapes", click on the arrow and find the "Talk Bubbles" library. In that there are several shapes which you can drag into position. The shapes fill with the foreground color (see chips, lower left of work-space)
Next, use the Type tool for the name.
Note that you can position the shape and the name with the move tool, and resize with the corner handles of the bounding box -- the advantage of doing things in layers.

Similar Messages

When I first am looking at my newly uploaded photos in "Library", a box appears near the bottom of the photo that says "loading" (the photo looks good to me), then it is more "faded" and does not look as good. Is there some setting on that I am not aware

When I am first looking at my newly uploaded photos in "Library," a box appears near the bottom of the photo that says "Loading". While it is loading, I usually think the photo looks "good". After the photo is done loading, it looks more washed out. Is there some sort of setting that I might have on (or that I need to turn on) so that this does not happen. I have Lr4. Thanks.

Hi Tracy,
There used to be a way to see if poster was new to the forum.., anyway - welcome to the forum.
As I was alluding to, biggest differences in initial display are due to:
* Camera calibration profile.
* Auto-exposure/contrast settings (for which compensations have been auto-applied in camera, but not in Lightroom).
So, choose a matching camera calibration profile (whether that's an option or not depends on your camera model - they're available for many but not all models) if you prefer one of them over "Adobe Standard" (the factory default profile).
Also, your camera covers for underexposure due to non-optimal auto-exposure/contrast setting, Lightroom doesn't, so your options are:
* turn it off in camera.
* learn to compensate manually (or automatically via a plugin) in Lightroom.
Of course, in addition to preferred defaults (alt-click big "reset" button in dev module), come up with some presets which are appropriate for your druthers and type of photography.. e.g. these will compensate Nikon ADL settings:
http://www.robcole.com/LrForumSupport/ADL%20Compensations%20%282012%29.zip
Cheers,
Rob

HT1386 Recently I updated iTunes on my PC and now the "Summary" for syncing my iPhone no longer appears near the top of my iTunes Window. The Summary lists items that I can sync with my iPhone such as "Music, Photos, Apps" etc.

Recently I updated iTunes on my PC and now the "Summary" for syncing my iPhone with iTunes no longer appears near the top of my iTunes window. "Summary" lists items I can sync such as "Music, Photos, Apps", etc with drop-down boxes I can use to manage how I sync those items. An icon for my iPhone does appear near the top right corner of the iTunes window; however, when I click on the icon, the sync automatically begins and there is no display of what is syncing or how much space has been used or how much space is left for syncing music, photos, apps, etc. The new iTunes window no longer lists "Devices" on the left-hand side of the window. Has anyone had the same issue?

In iTunes go to View>Show Sidebar.

My mac keeps highlighting different boxes all the time and a text box has appeared on the screen that says what box is highlighted if the sound is turned up when you press a key or click on a box you are informed of the action any ideas what i can do?

Hi my Mac keeps highlighting different action boxes (on its own) all the time a strange text box has appeared on the screen that informs you if you press a key or click on a item. if the sound is turned up you are informed when a item is highlighted or a you click on a item HELP!

Hi Thanks for your help fixed the problem
Kind Regards
Nannedee

How do I disable the drop down box which appears below the Search Box (which shows previous searches) when I start typing in my search topic

Hi I would like to know how to disable the drop down box which appears below the search box on the start page when I start to type in my search topic. If for example the first letter I type in is an S then it shows a list of previous searches of sites beginning with the letter S.

This is stored in the Firefox form history. For details of how to clear form history and prevent Firefox from storing any more form history see https://support.mozilla.com/kb/Form+autocomplete

A text like box has appeared on the screen of iphone and have to double click everything also it will not scroll down or across how can I fix this?

A text like box has appeared on the screen of my iphoe and this has to be over the app I want to use. I then have to double click on the icon for it to open. I cannot scroll across or down. I can access the apps but because it will not scroll I cannot access all of the screen. Can nayone help please???

It sounds like VoiceOver is partially on. First try triple pushing the Home button. This may turn VoiceOver off. If that doesn't work going to Settings/General/Accessibility and make sure VoiceOver is Off. Note you may have to use 3 fingers on the screen to scroll.

My AI program (CS5 Illustrator 15.1.0) will not open some PDFs. It was working just yesterday, but now will only open a PDF if the graphics of the PDF is visible in the box that appears in the lower left corner of the dialog box after you click Open. The

My AI program (CS5 Illustrator 15.1.0) will not open some PDFs. It was working just yesterday, but now will only open a PDF if the graphics of the PDF is visible in the box that appears in the lower left corner of the dialog box after you click Open. The file size does not seem to matter. Any ideas?

Hello Kathie,
Sorry for the inconvenience that has caused to you.
Please let me know if you have tried converting any other PDF to word with Reader.
Alos, please sign up at "https://cloud.acrobat.com/" using your Adobe ID credentials. Click on 'ExportPDF' tab and upload the PDF that you want to convert to Word.
Let me know if this converts fine.
Hope to hear from you.
regards,
Anubha

I have two iPhones. I just backed up all my photos on my old phone using iCloud but when I log into iCloud on my new iPhone nothing appears? The GB for the photos has been taken from my iCloud allowance so how do I retreive them on the new phone

I have two iPhones. I just backed up all my photos on my old phone using iCloud but when I log into iCloud on my new iPhone nothing appears? The GB for the photos has been taken from my iCloud allowance so how do I retreive them on the new phone

if you have a laptop just transfer them that way
open the iPhone folder then DCIM then copy all photos off your old phone then open iPhone folder for the new phone the DCIM and paste all photos in their

Text Box to appear on the last page of the report

Folks,
I have a report where I am using SAP BW Hierarchy in rows. So the rows may increase or decrease.
I also want to add a Text box with some Text at the end of the report.
Since Report may have many pages or one pae how can I force this box to appear at the end of the report not at the end of each page?
I will appreciate your help.
Thanks
Bashir Awan

Hi
add a single blank cell to your report, let it display the required text and position the cell relative to the bottom edge of your main table. (Properties->Appearence->Page Layout->Relative Position)
Regards,
Stratos

I can't drag a video transition into the timeline...a small x appears near the cursor

I can't drag a video transition into the timeline...a small x appears near the cursor

Sounds like you don't have enough handles.
http://www.fcpbook.com/Effects1.html

I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time.

I put my iPod charging, but it wont charge. The Apple logo appears on the screen for five seconds and then it goes off again. Afterwards, it does it again and again and again. I can leave it 1 hour or day charging and it will be doing this the whole time. What should i do????????????????????????????????????????????????????????????????????????????? /

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
and
Not Charge
- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Month doesn't appear in the axis for last 12 months

Hi !
I have created a graph which gives records for the last twelve months, my formula is:
if {Commande.DATE} >= dateadd('m',-12,currentdate) and {Commande.DATE} <=currentdate then {Commande.DATE}
At this point everything's fine ,
I have to create another formula to have Month name
from today which mean ,the order should be like this on my graph axis, 1st last month is febuary and last 12 months from today is March
March - April - May - June - July - August - September - October - November -December - January Febuary
here is that formula which I have called Month Sort order:
If month({@last12months})=01then
"Janv" else
if month({@last12months})=02 then
"Fév" else
If month({@last12months})=03then
"Mars" else
if month({@last12months})=04 then
"Avril" else
If month({@last12months})=05then
"Mai" else
if month({@last12months})=06 then
"Juin" else
If month({@last12months})=07then
"Juil" else
if month({@last12months})=08 then
"Août" else
If month({@last12months})=09then
"Sept" else
if month({@last12months})=10 then
"Oct" else
If month({@last12months})=11then
"Nov" else
if month({@last12months})=12 then
"Déc" else ""
in the Graph/Chart expert ,in the resulting dialog box I have set the following options:
On Change of: i have set the formula Month Sort order which will bring me the month name and for the order I have set in the Original order .
It works fine I retrieve records for last 12 months but on my axis ,the name for
the last 12 months doesn't appear in this case ( March) it is blank ,I have the records for March but not the month name March in my axis it show april to febuary but not March
Thank you for helping me

Thank you for your reply , but this doesn't solved my problem ,
I'm using a data from SQL2005 which is a stored procedure ,they have created a datefield named "DATE" and group the data the 1st of each month in this SQL stored procedure ,the only day for each month that I have in this data is the first of each month for each record found ,so I've changed the formula for this, to get records the 1st of each month for the last 12 months :
the new Formula for is:
if >= DateAdd("m",-12,CurrentDate) - day(CurrentDate)+1 and
<=DateAdd("m",-1,CurrentDate) - day(CurrentDate)+1 then
this condition formula bring me _Null datefield_ ,and this is why I see a null label axis at the bottom,do you have an idea how I can eliminate the null datefield , I need to have only the last 12 months data on this graph but I need all data for the past 3 years for 2 other grah on this same report
Thank you very much ,

PO still appears in the pending for confirmations queue

Hi Experts,
Can any one tell , Although for a PO the confirmations has been done and GR got created and Invoice is also done.
The PO has a delivery completion indicator, and GR also got final delivery indicator checked.
But still it appears in the list of pending confirmations queue in the SRM . along with many other Pos which waiting for confirmation this PO is also in the list. which actually should not appear.
we are using SRM version 4.
Please help me
Regards
Sridhar.k

Hi pradeep,
Infact the issue is same , but it seems it cannot help me out because we dont have a Variant set here in our Job.
to untick the delivery completed indicator.
As said below.
the Report BBP_GET_STATUS_2 ( in the job variant the check box related delivery completed is unticked) from the R3 if the goods recipet is done in R3
Regards
sairam

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

TS1369 i have just registered my new ipod but it doesnt appear in the menu for me to update it with the new music but it has put music into my old ipod....do i need to create a new apple i.d for my new ipod and create a second itunes app??

Hi,
O already have a really old ipod and just had a new one which i have registed today but when i have downloaded the itunes app onto my new laptop i cannot see the new ipod in the menu to update the music i have just purchsed.
Furthermore it seems to have put the new album into my old itunes so once i connect my old ipod i assume it will want to put it on there. I bought a new one as my old ipod is only 4gb and there is no space on it.
Can someone help please?

Registering an iPod or any other iDevice for warranty and support has nothing to do with the device appearing in iTunes. For what silly reason would you expect that to occur????
Honestly, it sounds like you have no clue how to use iTunes or sync media to the devices. Might be a good idea to read the User's Guide for the iPod to understand how to use it.
http://manuals.info.apple.com/en/ipod_touch_user_guide.pdf

DataTip box to appear near the plot for Plot Chart

Similar Messages

Maybe you are looking for