Date added missing for itunes 12.

In previous version of iTunes there was a column header option for audiobooks called date added. (when book was added to iTunes). I use the header to sort in reverse order so I get most recently added books at top of list.  This option seems to be missing in 12.0.1

It is still there. If you hold the cursor over any column header then control-click a long drop down list appears so you can select your column headers
EDIT: I am sorry, I misread "audiobooks". This reply is only valid for the Music category, I can't verify it for the audiobooks category

Similar Messages

  • Master Data is missing for Specified Matierials at cube level  !!

    Hello Experts,
    Good Day..!!
    I have been facing an issue in my project,  Master Data is missing for a KF and values are not displayed  in a report for the specified matierial Nos. Where as other matierial nos KF values are displaying.
    Intially, i checked from Cube End and found the issue is in Cube level only.
    For that in the data flow, i already checked whether the data has been loaded perfectly or not.
    Tried to reran the DTP once again and checked the values for the KF in the report and unfortunately KF values are not displaying for specified matierials only.
    Kindly advice how can i move further..
    Thanks,
    SN.

    Hi,
    Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
    Hope this helps...
    Rgs,
    Ravikanth.

  • Master data Lookup missing for sold to party

    Master data Lookup missing for sold to party?
    The look up flow is from E_BOM to E_BOM1
    regards

    Hi,
    Check if SIDs are generated for the infoobject, if not try to do the change run attribute and then load the data to Cube.
    Hope this helps...
    Rgs,
    Ravikanth.

  • Bank data is missing for country IN bank key SBIB0000003

    Dear Friends
    When i am start to print the cheque i am getting the error message
    "Bank data is missing for country IN bank key SBIB0000003"
    Please me suggestion
    Regards
    JK
    Moderator: Please, avoid asking basic questions

    Dear,
    Please check in T-Code FI02, that
    Bank Country = IN
    Bank Key = SBIB0000003
    Have you maintained any data there.
    Please revert.
    Br,VIvek

  • How do I transfer "date added" from one iTunes library to another?

    I recently transfered my iTunes library from one Mac to another w/ no problem, however all of the dates in the date added column show the date of the library transfer and not the original date the music was imported into iTunes. Is there any way to retrieve or preserve the original dates? I know, not a "real' problem, but a concern for me nonetheless.
    Thanks to anyone who can help.
    R.H. Sharp

    iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -
    Generally it is not advised to have multiple Photo libraries - but if you do you need IPLM to manage them
    LN

  • Playlists wont sort by latest date added like in itunes on iphone on ios5

    After updating to ios5 on my iphone 4, my playlists that i made are the same as in my itunes (currently displayed on itunes as the latest date added to the oldest i.e. newest to oldest). My iphone syncs it as the oppoiste, even though in itunes is newest to oldest. any ideas?

    Exactly same problem. I have a playlist sorted by "date added". Just updated my iPhone 4 to iOS 5 and it got a mess. Apparently, the first songs are showing on the bottom of the list - and even if I change it on iTunes to "invert" the playlist, it shows the same way on the iPhone.
    It wouldn't be a big deal if the playlist didn't have more than 2000 songs (it's really frustrating to scroll all way to the bottom to find the first song). Hope Apple fix it soon.

  • Data is missing  for Jan,Feb in 2008

    Hi,
    I have an issue with the report..The Concrete Profitability Report  is using the manually uploaded rates for  cost types. The business reported that the actual columns in the reports seem OK (since they come from the loaded amounts for the 12 months in 2008), but the budgeted amounts are showing a big variance and they don't look accurate bcoz the values are not calculated for Jan,Feb for 2008.The report runs based on multiprovider.
    Perhaps the budgeted amounts for Jan and Feb  in 2008 are  missing.
    Could yoy please let me know how can i proceed further and help me out in this issue.
    Thanks
    Sindhu

    Hi,
    Did u check in the respective cube whether the data is available for that period? check in the cube and also do LISTCUBE on multiprovider.
    Khaja

  • Weird and Incorrect Date Added Info in iTunes

    iTunes is showing me bizarre dates in the "Date Added" column.  Examples are "6/29/14180", "1/5/145", and "12/29/12364".  I should note that I'm running the latest version of iTunes and the latest version of Mavericks, but the iTunes library that I'm using is the library on my Snow Leopard drive (because I don't know a simple way of importing all of that music--25,000+ songs--into the Maverick side).  Anybody else experience this and/or know why this is?

    Incorrect date or time displayed in various applications

  • Why did the date added change in itunes

    All the dates have changed in my itunes library under "date added" to recent dates. What happened?

    What are you talking about?

  • Transaction Data Icon Missing For FlatFile Datasource

    Hi All,
    We are loading the data by using the flat file data is loaded successfully.But beside the cube we will have activation icon , Aggregates Icon and Transaction data icon. In our case we are missing transaction data icon.What could be the reason.
    But data loading is fine and for some of time chars also data missing .
    Pls anybody can throw some light on this.
    Thanks in Advance,
    Shah.

    Hello S SR,
    How r u ?
    just see the top and make the column adjustment like we do in MS-EXCEL you can see the Transactional Data ICON.
    Best Regards....
    Sankar Kumar
    +91 98403 47141

  • Error message saying registrysetting missing for itunes drivers

    i have been gettting the same message every time i open itunes.i have uninstalled and reinstalled itunes many times but am getting same message over and over again.it is as follows
    The registry settings used by the itunes drivers for importing and burning cds and dvds are missing.This can happen as a result of installing other cds burning software.please reinstall itunes.....
    what do i have to do to get this to stop
    thank you

    Hello Sondra,
    Thanks for using Apple Support Communities.
    There is a bit of troubleshooting to be done with this registry error you are receiving when opening iTunes on your PC.  The article below will walk you through the process however.
    iTunes for Windows: "Registry settings" warning when opening iTunes
    http://support.apple.com/kb/TS3299
    Take care,
    Alex H.

  • TS1436 cd burning driver missing for itunes

    when i open itunes this comes up " the registry settings used by itunes drivers for importing and burning cds and dvds are missing. this can happen has a result of installing other cd burning software . please reinstall itunes "   i have reinstalled itunes and it still cant burn a cd it says its missing cd burning software .
    help please

    Hello akabeav,
    It sounds like iTunes and other components need to be re installed as well. The instructions are different depending on the version of Windows you are using.
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/ht1923
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    http://support.apple.com/kb/ht1925
    Cheers,
    Sterling

  • Meta-Data are missing for table

    Dear ALL ,
    I am trying to call "HR_READ_INFOTYPE" from a Java program using rfc and I got this error:
    " Meta data equal to null is not allowed for field INFTY_TAB with type TABLE in meta data instance TABLES "
    the required table INFTY_TAB is used as a generic table in the function module. I tried to use PA0008 but it seems it is not possible to use it through  RFC call.  How can I avoid this exception?
    Thanks in advance.
    Mehdi.

    Hi,
    This function by default is not remote enabled. Loot at BAPI to access/modify infotype data?
    Regards,
    Jarek

  • SQL Developer 2.1.0.63 - Export Data menu missing for SQL Server databases

    Hi
    The Export Data menu only appears for Oracle databases in this version, it does not appear for SQL server databases.
    To demonstrate:
    Press F9 to run query
    Right click on Query Result data
    For Oracle an Export Data sub menu appears
    For SQL server no Export Data sub menu appears
    This worked in previous versions.
    Is this functionality going to reappear?
    Thanks
    Dave

    Hi,
    Looks like this is exactly the same problem for third party connections as I have the exact same issue for mySQL.
    I had to apply 1.5.5 version to fix it.
    Hope we're going to have this solved !
    Thanks,
    JP

  • Email subject and sender data is missing for HTML contents

    Dear all,
    Good day. I tried to send an email with HTML codes to draw a table. It works, however, the email sender and subject are missing. And the email body looks like the following:
    To: abc From: xyz Message-Id: Subject: This is email subject. Mime-Version: 1.0 X-Mailer: SAP R/3 Internet Mail Gateway 4.6B1 Content-Type: TEXT/HTML; Charset="US-ASCII"; Name="NO NAME.HTM" Content-Transfer-Encoding: 7BIT
    Table header and contents.
    Anyone has idea on what it happens and what is the solution? Your help and advise are greatly appreciate. Thanks in advance.
    Regards,
    CN

    is there any problem with Background spools with SAP? We are running R3 here. And looks like its the spool background job that's creating the error. When i execute the report it shows all the record in print preview or if i print it.
    Please Help!

Maybe you are looking for

  • How to avoid IE pop-ups when running BIP reports(w/ SSO) from Oracle Forms?

    Hi all, We have an OID/SSO integrated Oracle Forms and BI Publisher environment in place. We/users expect the same behavior when running Oracle Reports or BIP reports from Oracle Forms... which means receiving no intermediate pop-ups and simply getti

  • Value Transport (Exporting) to multiple screen fields in Search Help

    Hi all, I have created elementary search help using exit and attached it to data element. After F4 when I get hitlist I want all the values from the selected rows to get copied to the screen fields. I.e. I want the value transport. In the search help

  • Related to migration of db from sql server to oracle 11 g

    We're trying to migrate a Sql server managment studio database to Oracle 11g using SQL Developer 4.0. We can successfully connect to both Sql server managment studion 8.0 and Oracle 11g using the tool, as well as click through the Migration Wizard an

  • Parties and Services in Configuration Scenarios

    Hi, I think I understand the distinctions between parties, business-systems, and -services. If I define an integration scenario in the repository and check the checkbox b2b-communication, I have to use parties in the directory integration scneario co

  • Dequeue method hangs

    All, on our sun solaris OS 5.6 we run oracle database server 8.1.6 and AQ server 8.1.6. We use jdbc thin (classes12.zip) oracle8i 8.1.6.2.0 JDBC Driver for jdk 1.2.x . We use the AQ api from our java backend to dequeue messages from the AQ server. It