DATE and TIME and PATH stamps
I'm a relative newbie still having issues with getting date and time stamps on my printed documents. I use Preview, Pages, Numbers and also tend to print to PDF a lot, which I am opening in Preview.
I have found an "Insert" ability in Pages but for some reason it appears to only give me the date that I inserted the Timestamp and despite thinking that I understood that this would update itself when I re-open the document it does not seem to be doing this.
Can anyone help me figure out what I am doing wrong and/or what my options in Mac for putting the following on a document:
A. DATE and TIME /printed/
B. NAME of document with LOCATION (I assume this is software specific?!)
Thanks for any (further) help with this.
- Jon
menu Insert > Date_time
then apply what was described by Jerrold in his message above
Helpful AnswerRe: DATE and TIME and PATH stamps
22 nov. 2011 18:05 (in response to hotwheels 22)
Or simply double-click the inserted date-time (CAUTION : I don't know if the double click apply with every system or if it's dedicated to Lion).
As far as I know, the inserted date behaves the same in header, footer, text box or main text layer.
Yvan KOENIG (VALLAURIS, France) mardi 22 janvier 2011 20:25:12
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
Similar Messages
-
In my application I have a notes field which is a textarea on one of the pages. where users can put any misc. notes about a job application form.
On this notes section I want to automatically add the date and the author of the note onto the page and whenever a new note is added it adds another date and author stamp. does anyone know how to do this? thanks.At the risk of complicating your question, you may want to abandon the use of the DATE datatype and use TIMESTAMP WITH TIME ZONE for HTML DB Applications. It most likely will have a global audience, or might the HTML DB Database or Host maybe in another different time zone.
I think its a good habit to get into.
I have done this sort of thing previously and quickly and painfully became aware of how unsuitable DATE is for HTML DB Applications, when users in very different geographic locations make such postings of what you call 'notes'. Being I job application form, I feel 90% sure you will get applicants from different parts of the continent/world. -
Date and name stamp on the text
Hi
I am unable to get the name and date stamp after complete the text on a sales order and save it
does any settings needs to be maintained to get this name and date stamp on the sales order text
Thanks
MaheshHi Mahesh
For importing sales texts in to Sales Orders from Customer master do the following,
1) Create Text IDs in Text object KNA1 and KNVV and assign the text ids to the text procedure which in turn is assigned to the account group. (for customer).
2) Create access sequence with text object KNA1 and KNVV with the appropriate Text IDs and Partner function.
3) Create Text IDs at the Sales Document header or item and assign it to Text procedure and update the access sequence as you do in the earlier step.
4) Update the document type with the Text determination procedure.
Now after doing text determination , go VD02->Sales area data -> go to environment - >additional data - sales texts - >
in sales texts enter the language as EN and maintain the sales texts and save it
these texts will get copied into the sales header or item into that particular texid's
Regards
Srinath -
How to provide date and time stamp to the extracted file.
I 'm downloading data from DB to Flat file using GUI_DOWLOAD. whenever it is executed it is creating with a file name.
if i rerun the program the file is overwriting with the same name.
now based on the requirement how many times i executed, that many times file should be individually created and should be added with date and time stamp.
like
if when i executed at the very first time it should saved with filename, date and time.
say "Address.txt 04/05/2007 07:55:10"
When i executed it for second time it doesn't overwrite the file.
it should create a new file.
like "Address.txt 04/05/2007 07:59:20".
Please guide me the way if possible code.
Thanks in advance.Hi Vamsi,
Use FM 'F4_PROGRAM' to take file from the user .
In this case user will enter the file name. u can append date & time to that file path.
Refer this code.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SY-REPID
DYNPRO_NUMBER = SYST-DYNNR
IMPORTING
FILE_NAME = P_P_FILE.
concatenate P_FILE '04/05/2007 07:59:20' into V_FILE.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = v_file
filetype = 'ASC'
write_field_separator = 'X'
TABLES
data_tab = i_tab
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc = 0.
MESSAGE i002.
ENDIF.
Reward points if helpful.
Regards,
Hemant. -
Dates and convert to Unix Time Stamp using strtotime
I kind of asked this before but now I really need this to work since I'm currently creating a form using the Update Record Form Wizard and the Date Picker to add/update/delete tour dates and this DB was created years ago and uses Unix Time Stamps to enter dates in the DB (example: 1202596733) and I know ADDT's date picker automatically doesn't support that format but there's got to be some way to incorporate the strtotime PHP command into either the add page or the tNG.dispatcher.class.php file. But how? Has anyone experimented with this previously? I was on another forum and they told me to add this:
$timestamp = strtotime($_POST['tourdate']);
to my code but they didn't tell me where and nothing seems to work in making it happen. Anybody got a clue?Hi Sean,
You should be able to simply add the new directory to your include path. But this might fail if relative rather than absolute paths are used
Indeed, ADDT internally uses relative paths at various places, e.g. the file "includes/common/KT_functions.inc.php" has function named KT_getSiteRoot(), where the variable $siteroot has the following value:
dirname(realpath(__FILE__)) . '/../..';
In addition many scripts are defining an absolute path to other scripts, e.g. the Captcha configuration file sets the global variable "KT_CAPTCHA_TEMP_URL" to "includes/common/_temp/.captcha/" -- means that moving the ADDT libraries to a folder like "includes/ssa/" will not work without modifying whatever ADDT script which uses such a hard-coded path, and there are plenty of them.
Cheers,
Günter Schenk
Adobe Community Expert, Dreamweaver -
How to get the most current file based on date and time stamp using SSIS?
Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vvhi simon
i excuted this script it is giving error..
Microsoft SQL Server Integration Services Script Task
Write scripts using Microsoft Visual C# 2008.
The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
[System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
#region VSTA generated code
enum ScriptResults
Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
#endregion
The execution engine calls this method when the task executes.
To access the object model, use the Dts property. Connections, variables, events,
and logging features are available as members of the Dts property as shown in the following examples.
To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
To post a log entry, call Dts.Log("This is my log text", 999, null);
To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
To use the connections collection use something like the following:
ConnectionManager cm = Dts.Connections.Add("OLEDB");
cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
To open Help, press F1.
public void Main()
string file = Dts.Variables["User::FolderName"].Value.ToString();
string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
System.IO.FileInfo finf;
DateTime currentDate = new DateTime();
string lastFile = string.Empty;
foreach (string f in files)
finf = new System.IO.FileInfo(f);
if (finf.CreationTime >= currentDate)
currentDate = finf.CreationTime;
lastFile = f;
Dts.Variables["User::LastFile"].Value = lastFile;
Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv -
How do you edit out the date and time stamp from a photo
How do you edit out the date and time stamp from a photo
You can blur it out with retouch
The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
Regards
Léonie -
Can you remove a date and time stamp off a photo that has already been taken?
Can you remove a date and time stamp off a photo that has already been taken?
only with Photoshop or similar software that offer some clone/heal feature.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide -
How do you date and time stamp pictures and videos using a EOS Rebel T3?
I am needing to utilize date and time stamping on videos and photos in my work. The pictures and videos must display time, a date, and reference number. I have gone through the cd, owner's manuel and software manuel and I am unclear if I can perform this function.
While this is a relatively common feature on point & shoot cameras -- where the photo is thought of as a snapshot to document a memory in a person's life, among DSLR cameras it's not very common (I don't actually know of a DSLR that does this though I don't doubt that it may exist). DSLR users are usually expecting a higher quality image -- so now the image is thought of more like art and less like a snapshot and the date/time in the corner distracts from the image. Also they tend to be more advanced users who would be able to modify the image themselves so they have little need for such a feature.
The camera does record the date & time... but it's in the EXIF data (information recorded into the image file but not displayed).
SO... there are programs that will just do this. You'll need to do a search (I found several but have never tried one so I can't vouch for them). I think there are Photoshop plug-ins that do this (assuming you have Photoshop). These programs allow you to define the info you want printed (including EXIF data such as date/time) and you get to pick the location, font, size, color, etc. and ultimately the location on the image where you'd like the info displayed. They then add the info visibly onto the image for you and most support "batch" use (e.g. drop a whole folder of images on it and they'll do them all.)
Tim Campbell
5D II, 5D III, 60Da -
How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.
BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS -
Help adding current Date and Time stamp to file name
I need help with my script adding current Date and Time stamp to file name.
This is my file name = myfile.htm
I would like to save it as = myfile.htm 8/29/2007 11:41 AM
This is my script:
<script>
function doSaveAs(){
if (document.execCommand){
document.execCommand('SaveAs','1','myfile.htm')
else {
alert("Save-feature available only in Internet Exlorer 5.x.")
</script>
<form>
<input type="button" value="Click here to Save this page for your record" onClick="doSaveAs()"
</form>
Thank youI agree, I guess I overlooked that!
I would like to save it as = myfile 8/29/2007 11:41 AM .htm
I need help with my script adding current Date and Time stamp to file name.
This is my file name = myfile.htm
I would like to save it as = myfile 8/29/2007 11:41 AM .htm
This is my script:
<script>
function doSaveAs(){
if (document.execCommand){
document.execCommand('SaveAs','1','myfile.htm')
else {
alert("Save-feature available only in Internet Exlorer 5.x.")
</script>
<form>
<input type="button" value="Click here to Save this page for your record" onClick="doSaveAs()"
</form> -
I'm a relative newbie still having issues with getting date and time stamps on my printed documents.
I use Preview, Pages, Numbers and also tend to print to PDF a lot, which I am opening in Preview.
I have found an "Insert" ability in Pages but for some reason it appears to only give me the date that I inserted the Timestamp.
Can anyone help me figure out my options in Mac for putting the following on a document:
A. DATE and TIME printed
B. NAME of document with LOCATION (I assume this is software specific?!)
Thanks for any help with this.
- JonYes, ...and I was hoping to find a solution since I sometimes have the same problem!
But I'm afraid there is none. For sure I didn't find any fxscript function returning Date&Time. At the moment the best solution I know is what you suggested, Ian: capture twice, once in FCE for editing and once in iMovie for reading Date and Time.
I'd be glad to write and share a plugin displaying date and time if somebody is able to tell me what fxscript function (if any) should I use...
Piero -
Date and Time stamp for the archives
Hi,
I'm trying to set up a date/time stamp field for a Documaker archive.
I've added a TIME_STAMP field in my APPIDX.DFD and I populate the field using a DAL script, invoked by a PreTransDAL line in my AFGJOB file. That works fine but, the DAL script being invoked for every transaction, it adds to the processing time.
I do not need an exact date/time stamp for each transaction in the batch, I could use the same one for all the transactions. That would require the TIME_STAMP global variable to be populated once, at the job level, at the beginning of each batch.
Any suggestions?
Thanks.Hi Gaetan,
Try using a BatchBannerBeginScript to populate a GVM with the date/time, and then reference this GVM in your APPIDX.DFD. In this manner the value will be updated at the start of processing for each batch rather than each transaction. Or, consider the possibility of adding the transaction date/time into the extract data and then sourcing from that point. Either should work. In my experience most customers prefer that the archive date/time come from the system of record rather than the time the transaction was archived -- unless of course the customer actually wants to record the time the transaction was archived, in which case the method I've described above should work.
Enjoy!
Andy -
I have a 4s iphone and want to date and time stamp photos taken with the regular camera installed on the phone. Does this require a separate app?
For such to be visible, yes. Many such apps in the app store.
-
Add Date and Time Stamp to video from AVCHD folder
New to this software and forum, so I apologize if this has been asked and answered. I am trying to insert the date and time metadata from the AVCHD folder using the .mts clips. Curently I am using VaTS to stamp the video then render the clips through Power Director. I would appreciate any help on this topic. Thank you for your time
BenB, thanks for responding to both of my posts. The footage was shot using a Sony HDR-XR500 AKA consumer video camera. Date and time is not burned into the image when captured digitally. The only way to do it would be to run the video through a video capture device that basically just records what the video outputs. This solution really ***** so i'm looking for somthing more effective.
Maybe you are looking for
-
My HP Officejet Pro 8600 Plus all-in-one doesn't scan over my wife network anymore
I have a wi-fi network in my home which works fine for internet on my laptop, and I used to be able to both print and scan over this network just fine. I can still print using the network, but can no longer put stuff into the document feeder and go
-
Value too large for column "OIMDB"."UPA_FIELDS"."FIELD_NEW_VALUE"
I am running OIM 9.1.0.1849.0 build 1849.0 on Windows Server 2003 I see the following stack trace repeatedly in c:\jboss-4.0.3SP1\server\default\log\server.log I am hoping someone might be able help me resolve this issue. Thanks in advance ...Lyall j
-
I used the audio widget in iBA but got this error message when I tried to deliver in iTunes Producer
-- any clue what to do? ERROR ITMS-9000: "Files of type audio/x-m4a are not allowed outside of widgets: assets/media/12%20Largo%20for%20Glass%20Armonica%20in%20G%20Minor.m4p" at Bo
-
How can I convert avi file to mov file for final cut pro?
Hi I have source files which are captured by Canous Edious system. I want to edit these files on final cut pro 5.1, However, I got the audio but no image at all. Although I tired to use Discreet Cleaner 6.5 in my apple computer, it did not work. What
-
How to add audio to individual slides?
According to the Keynote User Guide 2009, on page 70, it is possible to add a sound file to an individual file so that the sound stops when you go to the next slide and you can use a different sound file. What I want to do is use three or four songs