Date and time/ changes by itself

My date and time....well mostly my time keeps randomly changing.....any ideas?

I *may* have found a solution.  I had been having the same issues with my iPhone 5 running the latest iOS (6.0).  And it was changing its time AND date - and seemed to be happening both randomly AND any time I changed cell towers (I'm on Verizon) - especially if one cell tower was LTE and one was not.  What I did was turn OFF the "Set Automatically" function:
Settings > General > Date & Time > Set Automatically to OFF
Then there is a feature called "Setting Time Zone" in location services.
Settings > Privacy > Scroll all the way to the bottom and you should see "System Services" > Setting Time Zone "off"
This allows your location services to still run, except for that one small part.
Not sure if this will fix your particular issue or not.  But so far it is working well for me!  I'll reply if aything changes.

Similar Messages

  • Next Syndication Date and Time changing

    Hi Experts,
    While setting the Outbound port to Automatic with Daily processing interval i set Next Syndication Date and Time to some value.
    but after the first occurrence of syndication, Next Syndication Date and Next Syndication Time are changing to new unexpected value.
    I am using MDM 5.5 SP6 version.
    Please help on this.

    Hi Prashant
    Copying from the SAP Note 1124246-
    Bug Fixes
    MDM SYNDICATION SERVER 5.5
    Fixed: Change for auto syndication to update next syndication time without accumulating time offsets
    Please close the thread if answered.
    Thanks-Ravi

  • My new Nokia Lumia 800 changes date and time after...

    When i switch off and on my Nokia Lumia 800, date and time changes: from 2 september 2012 8.00 to 2 march 2013 14.00. I need help to understand this strange problem and find a solution.

    chrysale wrote:
    I had the same problem with my Lumia 800. The Lumia 800 kept changing time and date as soon as I switched it off and turned it back on. In my case, doing a HARD RESET helped to fix this. BEWARE! You will lose all your data!
    Switch off your phone, hold Volume Down, Power, Camera buttons down. Switch phone on. As soon as it vibrates, release Power button, keep Volume Down and Camera button pressed for a few seconds.
    I have the same problem and after going through all the various support sites- Nokia, O2, and endless forums I was told the same thing "Make sure your auto-update for date and time is switched to automatic" But after telling them I don't know how many times that my Lumia 800 didn't have this option, only a 24 hours switch I was told there was nothing that could be done. However I appear to have sorted it out myself. The problem appears to be (or on my phone at least) is wi-fi connection, before I turn my phone off I have to disconnect from wi-fi and when I turn the phone back on the date and time stays corrected.
      When I set the date and time manually (for the 3000th time!!) I held in the power button until the slide down close screen disappeared then released it and the phone restarts, then I done it again- same proceedure just to be sure and ever since the date and time has stayed correct. BUT BE SURE TO TURN OFF WI-FI BEFORE SWITCHING PHONE OFF. Hope this helps

  • HT1551 Initial set up setting date and time just spins and spins..

    Can't seem to get past the set up time and date on my Apple TV...it just spins and spins

    Go to the Setting menu> General > Set Date&Time . It should display AUTO. Click on set Date and Time change it to MANUal and adjust the time accordingly.
    As for the apple id that should be a different issue, my ATV frequenlty thinks it's in California's time zone and I have no trouble login in and out.  Try going to the Apple ID site ifto  you can't login there, you may have the wrong password.
    Apple ID:https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

  • Using + and - keys to change dates and times; Find and Replace event

    Hi all, \
    I have two iCal related questions. One has been bugging me since the Snow Leopard upgrade and the other I'm just wondering about.
    1. Is it just me or is it no longer possible to use the + and - keys to increment dates and times when editing an event? It seems that now I have to actually type in the numerals instead. Is there something in the preferences I'm missing or is that just the way it is now? Seems like a step backward, if so.
    2. Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se? I just want to rename the event itself.

    Don,
    ...is it no longer possible to use the + and - keys to increment dates and times when editing an event?
    I did not know that was possible. Try using the ↑/↓ arrow keys to increment numbers, and →/← arrow keys to change fields.
    Is there a way to do a "find and replace" for an event that occurs sporadically throughout the year, but isn't a repeating event per se?
    AFAIK, you have to use the search field to find the individual events, and change them when you click on the events in the search results field.
    ;~)

  • Asked to change Date and Time upon starting my G5 with Leopard 10.5.5

    Hello, I just installed Leopard 10.5.5 on my G5 2dual 2.7 and eveything works great. The only issue I see, which is minor, is I am always asked to change the date and time manually after starting up the computer. The date defaults to June 1st 1969 or something crazy like that. I check the set date and time automatically and if sets itself correctly- Like I said this isn't really creating any functionality problems, but I am curious to know why I am always getting that message? Thanks in advance, Brett

    Sounds like a failing PRAM battery. See http://support.apple.com/kb/index?page=search&q=pram%20battery&archive=y for appropriate items.

  • How can i change date and time after importing a file

    hello
    i'm importing AVI files first in iMovie because Final doesn't support (other question i put in) but when i see the scenes form 1993 they have the date 2004.
    i believe 2004 is the date i put them on the computer.
    Now i looked in the help files Final Cut Pro but cant find anything to adjust the date and time.
    it works well in iMovie using the help files:
    Right-click the clip you wish to edit and click Adjust Clip Date and Time from the menu that appears. Or click on Archive and than adjust date and time
    But as i said i cant import the files in FCP have to import them to  iMovie files adjust the date and than import to Final Cut Pro but than de changes i made to the date and time  are gone and in FCP 2004 is again the date of the file!!!
    Question how can i Change in Final Cut Pro the date and time in a same way as iMovie does?
    Jemajoro

    OK, I think I understand what you are saying but it still does not look like it is doing it as you describe.
    Here is another screen shot.
    Note that all clips in "2007 August" event have the date of Aug x, 2007.
    Yet, the event "2007 August" still shows up under the 2012 "folder" (is that the right terminology?).
    The newest clip in this event is Aug 31, 2007 so shouldn't it be categorized as 2007 and not 2012?
    I think you know this but I am using the following feature:
    Go to the sprocket icon under the events.
    Select "Group events by date" and then by "group events by year and month"
    Thanks again for all the help

  • How do I change the "Set Date and Time Automatically" server

    Is there a way to change System Preferences/Date & Time/Date & Time/Set date and time automatically from "Apple Americas/U.S. (time.apple.com)" to another time server instead?

    sig wrote:
    The menu has a drop down. But if you know the address of another time server I would think you can type it in.
    Yeah, that's not really a menu, but a "combo box", which is a combination of an edit field and pop-up menu. So you can choose from existing items or just type in whatever time server you want.
    charlie

  • TS4268 I changed set date and time automatically to "no" and I was able to activate iMessage. This seems contrary to all the troubleshooting discussions I've been reading.

    Is there any definitive info on this subject?

    When ATV is setting date and time, and hangs there, it usually indicate there isn't a network connection.  Is your router still working, is the Internet for all the other computers on the same network working?  Have you tried changing from WiFi connection to Ethernet or vice versa?

  • Set date and time automatically keeping turning itself off?

    Every time I go to the App Store I get a pop-up stating that it can't connect and that this may be caused by an incorrect date and time setting.  I go to Settings and discover that "Set Automatically" has somehow turned itself off.  I can turn it back on and then access the App Store.  Until the next time.  When the whole problem starts over.  Why won't it stay on Set Automatically?  Thanks.

    Try this first. Reboot your iPad.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
    If that doesn't work, you can reset all settings. Settings>General>Reset>Reset all Settings. That will turn all of the settings back to factory defaults and you will have to enter them again. You will not lose any data.
    You can also try restoring from a backup - if you have a recent backup. The backup contains the device settings and that just might work. It worked for me when I was experiencing the very same problem that you are having.
    How to backup and restore from a backup
    http://support.apple.com/kb/HT1766

  • HT5252 I tried to change my metadata date and got this   Aperture was not able to adjust the date and time of the original file "01769_p_h13ajyrm4bm0944.jpg" because it is locked or you do not have permission to modify it.

    I tried to change the metadata date.  It changed the date on my photo, but when I checked the box that said "also change my original file", it gave me this error message.
    Unable to change original file.  Aperture was not able to adjust the date and time of the original file “01769_p_h13ajyrm4bm0944.jpg” because it is locked or you do not have permission to modify it.
    Wassup?

    What is your Aperture version? The older versions of Aperture 3 had a problem to apply Metadata changes to the original file.
    If you are using the current version Aperture 3.4.5, try to repair the permissions on your Aperture library, if you have not already done so:
    Launch Aperture with the key combination ⌥⌘ held down and select "Repair Permissions" from the First Aid PAnel, that will appear.
    If that does not help, post back with more information on your original files - are the referenced or managed? Where is your Aperture library located? Since when do you have this problem? And what did you do directly before noticed the problem for the first time?
    Regards
    Léonie

  • I bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

    i bought my i pod touch from us but i live in india .i have been using this from many days fr just a few days before something went wrong with it and the date and time has changed what do i do?

    Have you went to Settings>General Time&Date and correct the time.  Make sure the time zone is correct too.  Also go to Settings>General>Inernational and make sure the Gergorian calender is selected.

  • How to change date and time format

    Hi experts,
    Can i know how to change the date and time format?
    I want the date format to be dd-mmm-yyyy  and time format to be hh:mm:ss
    These date and time is in my sapscript form.
    I make use of PERFORM function in sapscript.
    This is the code in my print program.
    FORM get_actlog_QA TABLES in_tab STRUCTURE itcsy
                           out_tab STRUCTURE itcsy.
       DATA: object TYPE string, "
            qaname LIKE JCDS-USNAM, "NAME for engineering process, QA Manager
            qadate LIKE JCDS-UDATE, "DATE changed in engineering process, QA Manager
            qatime LIKE JCDS-UTIME. "TIME changed in engineering process, QA Manager
    DATA: lt_jcds type standard table of jcds,
          wa_jcds like line of lt_jcds,
          new_date(10) type c.
      READ TABLE in_tab INDEX 1.
      MOVE in_tab-value TO object.
      select * into CORRESPONDING FIELDS OF TABLE lt_jcds
      from jcds WHERE objnr = object
        AND  ( stat = 'E0005' )
        AND inact = ''.
      Loop at lt_jcds into wa_jcds.
          qaname = wa_jcds-USNAM.
          qadate = wa_jcds-UDATE.
          qatime = wa_jcds-UTIME.
       READ TABLE out_tab INDEX 1.
       MOVE qaname TO out_tab-value.
       MODIFY out_tab INDEX sy-tabix.
       READ TABLE out_tab INDEX 2.
       MOVE qadate TO out_tab-value.
       MODIFY out_tab INDEX sy-tabix.
       READ TABLE out_tab INDEX 3.
       MOVE qatime TO out_tab-value.
       MODIFY out_tab INDEX sy-tabix.
      endloop.
      clear wa_jcds.
      ENDFORM. 
    This is my PERFORM in sapscript.
    /:           DEFINE &V_QANAME& = ''.
    /:           DEFINE &V_QADATE& = ''.
    /:           DEFINE &V_QATIME& = ''.
    /:           PERFORM GET_ACTLOG_QA IN PROGRAM ZFIR002
    /:           USING &VIQMEL-OBJNR&
    /:           CHANGING &V_QANAME&
    /:           CHANGING &V_QADATE&
    /:           CHANGING &V_QATIME&
    /:           ENDPERFORM.                     
    Sapscript
    Prepared by : &V_QANAME& ,, &V_QADATE& ,, &V_QATIME&
    The output now is
    Prepared by: Name   20080312  115536 
    I want to change the date format to 12-MAR-2008
    and the time format to 11:55:36 
    Can anyone please suggest on how to solve this?
    Thank you.

    Hi,
      Before assigning the  QADATE value you can write the logic to display  20080312   as  12-MAR-2008  taking the offset values .
    Like
    qadate = wa_jcds-UDATE.
    qatime = wa_jcds-UTIME.
      lw_year    = qadate(4).
      lw_month = qadate+4(2).
      lw_date    = qadate+6(2).
    case lw_month.
    when 1.
    when 2.
            concatenate lw_date  '-FEB-'  lw_year into qadate.
    when 3.
          concatenate lw_date '-MAR-' lw_year into qadate.
    endcase.
    READ TABLE out_tab INDEX 2.
    MOVE qadate TO out_tab-value.
    MODIFY out_tab INDEX sy-tabix.
    And you can also change the timeformat also  .
    then assign that value to qatime .Then
    READ TABLE out_tab INDEX 3.
    MOVE qatime TO out_tab-value.
    MODIFY out_tab INDEX sy-tabix.
    I think this helps you.
    Regards,
    Rajitha.

  • Apple Remote Desktop - how to change the date and time server ip address?

    Our imacs keep getting out of synch with our Windows Active Directory server and when they do, users can no longer log into the imacs. The imacs this morning were more than 5 minutes fast, for example.
    So, we have changed the date and time server on one of our imacs to our internal time server and that works fine. Now I would like to update all of the other imacs using a unix command in ARD. Can anyone tell me how to send this change? For this message, let's say our internal time server is 172.30.100.100

    Not a problem. There are a number of other system and network setup commands that you might find useful at some time. From within the Remote Desktop Admin in the Send Unix Command window type:
    networksetup -help
    systemsetup -help
    That will give you lists of the commands, including the one I posted above, with their basic syntax. They're handy to know.
    Cheers.

  • How do you change date and time in Photos?

    How do you change the date and time of photos in the new Photos app? I know how to do it in iPhoto, I'm having a problem figuring it out for the new app. I have a MacBook Pro 13" running on OS X Yosemite Version 10.10.3

    Select photos
    Click "Image" menu > "Adjust Date and Time..."
         or
    Select photos
    Command + i（or "window" menu > "info")
    "Double-Click" around "Date and Time" on "info window"

Maybe you are looking for