Date and time is STUCK in the year 2512BE

my ipod touch is stuck in the year 2512BE. I've tried to change it in the settings and it will not change to any year before 2512BE. I've rebooted and reset everything with no luck,

Head to Settings -> General -> International and make sure the Calendar option is set to Gregorian.
B-rock

Similar Messages

  • Cisco SPA525g2 Date and time Not Synced with the PBX server

    Hello,
    We have a couple of SPA525g2 phone connected and registered to our PBX server. We were able to configure 3 extensions on different lines of the phone. However, at times we were encountering issues with the other lines configured on the phone. There are times wherein 1  extension configured on the phone is having one way audio issue, but the other extensions configured on the same phone is working fine. and we have to reboot/reset the phone several times for all the extesions configured on the phone to work.
    Also, whenever we reset the phone, the date and time will be way way behind the current date and time, eventhough we have already set the correct date and time before we reset the phone.
    How can we resolve the one way audio issue on 1 or 2 extensions of the phone, while the other extensions configured to it is working fine?
    How can we make the phone sync the date and time with the PBx server?
    Any input and help regarding this issue is greatly appreciated...
    Btw, date and time  issue not sync with the PBX server is just happening on SPA525g2, we have other phones like SPA303, SPA504, and SPA232D/SPA302D. All other phones' date and time is in sync with the server even though we reset them except SPA525g2.
    Thank you very much,

    PeterMacSF,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Get date AND time to show in the menu bar

    What is that technique to get date AND time to show in the menu bar please?

    Install iStat Menu
    System Preferences -> iStat Menus -> Date & Time
    \[X] Show Date & Time
    Format .... \[Edit]
    (*) Custom (drag tokens to build a custom format)
    Drag a light blue token into the edit line below the token selections. If you want a space a colon a dash, etc... just type that character(s) before after draging a token into place.
    I created: 9:35 PM Sat 1-Aug-2009
    You can create anything you like in any order you like.
    The other alternative (if you happen to be a fan of the Unix strftime() function) would be to use the % formatting characters in the Expert time format expression box. Use the Terminal "man strftime" to find out all the available % formatting codes.
    But I think the Custom Drag & Drop section is the easiest to use.
    However, if this doesn't work for you, then I guess it is just a case of "Your Mileage May Vary".

  • Getting Date and Time to Show in the Menu Bar

    I have the OS setup to set the date and time automatically and the clock set to "show date and time in the Menu Bar. I have the international set up for the Day of Week, Month, Date and Year, but the menu bar only shows "Fri X:XX:XX PM" is there any way to get it to show me Fri May XX, 2008 X:XX:XX PM"?
    Thanks for any help.
    John

    I use iClock too. It is much more customizable than the Time & Date clock provided with the system. I have used it for several years and it has been very stable for a third-party application.
    Although I have only used it for a couple of months, I also really like another third-party application you may like, to put weather conditions on the menubar called WeatherDock (freeware). It accesses Weather.com to provide the current temperature (of course) but it can include several other weather conditions (depending on how much space you have on your menubar). In addition to temperature, I have it show the weather condition (currently partly cloudy, typical in Houston), wind direction and speed (I ride a bike to the office and this tells me if I’ll be fighting it or aided), and humidity (also a Houston favorite). It will also speak the weather conditions when they change.

  • Can I date and time stamp photos on the photo?

    I would like the date and time viable on the photo.

    RobCob wrote:
    I'm honestly only concerned about my photos and music.
    You can Manually Backup your iPhoto Library and your iTunes Library to an External Drive without addition Software.
    How to correctly move your media:
    iTunes: How to move the library to an EHD
    Early iPhoto: How to move the Library to an EHD
    iPhoto '11: Move your iPhoto library to a new location
    iMovie: How to move the Library to an EHD
    It is important that the External Hard Drive is formatted as Mac OS Extended (journaled).

  • My date and time is wrong. The app won't open for me to change it

    I Changed the date on my MacBook Pro and them tried reopen the date and time app and it won't open.

    I changed time and now my MacBook won't work

  • Mac Mini won't connect to internet using Apple products (Safari, iTunes, AppStore). Date and time are frozen to the moment CPU is booted up. Firefox works. Cannot update.

    For the past few days my Mac Mini has been having issues.
    Safari won't connect to internet, but Firefox does.
    Time and date are frozen. Only resets when copmuter is re-booted.
    Unable to update via App Store and iTunes won't connect either.
    Please advise.

    Hi again,
    Let me ask for some better help for you that is familiar with this problem (if in fact it is a similar problem with the IP address and your ISP.
    The other topic concerning this can be found at:
    http://discussions.apple.com/thread.jspa?threadID=2725608
    It is a somewhat lengthy thread but may just apply to your situation.
    Anyways I will see if I can call on some better help for you. Hang in there. Best to arm yourself with enough info before contacting Comcast so they might know what you are dealing with fully.
    littleshouders
    edit: I have posted for some extra help for you that may have a better idea of what's going on if it is your ISP and their modem and how it handles the IP address causing Safari and iTunes not to connect. Hang in there it may take awhile but I'm sure someone will pop in to help.
    Message was edited by: littleshoulders

  • How do I sort clips in the Project Assets window by date and time before dragging into the timeline?

    I am using Elements 12 and don't seem able to sort clips by time and date (when using clips from different cameras) as we were able to in an earlier version of the program.

    Roger A
    I will think about it some more to make sure I am not overlooking anything, but, as far as can be determined, your sorting choices in Project Assets are under Sort by, with only two options:
    a. File Name (ascending)
    b. Duration (ascending)
    ATR

  • Date and Time Will not change the Month

    In my System Preferences I can not highlight or change the month from "1" in any manner. This is consistent throughout the system for iTunes (last played), iCal, Finder, etc. a file saved today would be saved as 2008.1.18 as consistent with my layout preferences, but not the actual date. However, in the expanded view, it still will read as May 18th, 2008. Any ideas? Currently I'm in Israel and there aren't any Genius Bars around here, but if not, I'll try in August, in NY

    I can't say if Lion has the ability to fix itself, however, I've been useing it since the day it was released and a few bugs it had at first went away after a few days on their own.  As far as setting the Date & Time on AppleTV and the other WiFi issues I was having after updating to 10.7.1 (which I felt were huge, persistent, and unacceptable), everything is functioning properly now.  The only change I made was this: I made sure that I had a connected WiFi connection using the Airport Utility and Network Preferences via System Preferences and then I locked the Network Preferences to prevent further changes.  I can't say for sure if that was all that was needed, but AppleTV, WiFi, and Home Sharing are once again operating correctly and usable.

  • HT1386 When I try and sync my brand new iPad  I get an error message saying the IPad does not have the latest iTunes but the Ipad says it is up to date and I am stuck in the middle? Help.

    The specific message is must download iTunes version 10.7 or later?

    You will need at least Snow Leopard (10.6.8) to install iTunes 10.7. Check the Apple link below for requirements and ordering info for Snow Leopard.
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

  • How do I have photos in iPhoto display on their face the date and time?

    How do I have photos in iPhoto display on their face the date and time? Displaying in the camera shows this. When I check edit the info is there. How do I have that displayed on the face of the photo when I view it in iPhoto?

    How do I have photos in iPhoto display on their face
    the date and time? Displaying in the camera shows
    this. When I check edit the info is there. How do I
    have that displayed on the face of the photo when I
    view it in iPhoto?
    Hi! My name is Tom from San Diego, CA. I have the exact same question as you. That is, I would like to be able to print out a photo from iphoto with the date that picture was taken displayed on the face of it. In this way, someone looking at that picture in a photo album years later would know when it was taken. Did you ever find a method to print copies of photos out of iphoto with the date displayed on the print? Thanks for your help!

  • From yesterday, I have been facing the problems in my iphone and my wife iphone. The same problem, "cannot connect to itunes store". I have strong internet connection. I tried all the possible way I could like setting, general, date and time.....etc.

    I have proble of "cannot connect to itunes store. After I have updated the new software ios6, the problem arised in one of my mobile. In the second mobile, I didnot updated the software.Today in the morning, the problem ariesed in that mobile as well. I cannot open the itunes, don't have access to apple store . I tried to solve the problem like going to setting, general, Date and time, automatically off, keeping one year ahead date. I tried all the possible options I could get from the googel. How do I get rid of this problem?

    No - I have not tried other routers on my network.
    What I meant was I could use my itouch on other users wireless networks without any issues.
    I'll update the routers DNS to try  using Google's 8.8.8.8 instead of my ISP.
    Is the issue DNS performance using local ISP -or are there other possibel isues when using local isp DNS?

  • Stuck on setting date and time

    Apple TV is new, straight out of box.  I'm getting to the screen that says "Setting date and time. . ."  Then it stays stuck there.  If I bypass this screen, everything except date and time is set up, and because this is not set up, nothing is working.  All other devices hooked up to wifi in the house are working and I've unplugged and reset the Apple TV and the router.  How do I get this device to set the date and time?

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router.
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • Can I print the date and time using aperture 4

    Work inspectors require that I provide pictures with date and time of creation from the metadata info.  I was looking at google searches and found Aperture with borderFX plug in might work.  Can anyone confirm this is a fact?  I would hate to pay for the software to find out this feature is not available during export.

    BorderFX and Aperture are a great combination for framing and annotating your finished photos. I like to second Frank Caggiano's answer.
    I am not sure from your post, if you already have Aperture, so just an add-on: BorderFX works also with iPhoto as an "Export" plug-in.
    You can access it in the "File > Export" panel, when saving a photo.
    If you do not own Aperture but iPhoto, you can try BorderFX first with iPhoto and see if it will suffice for your purposes. BorderFX is "Donation ware". You can try and explore it freely, before you donate. 
    BorderFX - iBorderFX iPhoto
    An Example:

  • Changing the Date and Time of photos

    Hello,
    i have been importing images from my windows machine and want all the dates to be correct, i have seen the adjust date and time, and made the changes but under the events the dates dont change and when i click individual photos the dates and times are not changing.
    so i was wondering how do i change the time for each photo and event? can i change the time to a start and finish date rather than just one date?
    Any help with the above would be much appreciated.
    Thanks

    I have just looked at this again, i dont see an option to set both a start and end date, any ideas?
    That is not an an option - and it makes no sense
    You can do one of three things:
    1 - add a constant delta to all selected photos thereby correcting an incorrect setting on a camera and preserving the sequence and integrity of the photos dates ad times
    2 - change the date and time for all selected photos to a specific value
    3 - change the date and time for all selected photos to a base value plus an increment for each successive photo.
    There are two choices under the photos menu
    1 - adjust date and time - this adds a constant Delta to the selected photos - is is designed for correcting camera times or time zones but keeping the basic sequence
    2 - batch change date and time - this simply changes the date & time to your selected value with an option to add an increment to each
    Both have an option to modify the original photo which I do (I'm not sure why you would not want to modify the original)
    And when i go into photos, the ones that i have altered by +Photos >>> Adjust Date and Time+ still have different times and dates, any ideas?
    AS described in the iPhoto help and above
    1 - adjust date and time - this adds a constant Delta to the selected photos - is is designed for correcting camera times or time zones but keeping the basic sequence
    So after adjusting time and date all photos selected will have the time and date changed by the same amount (a constant delta) and if they were all different before they will still all be different - if they were all the same before adjustment they will still all be the same but at a different value
    LN

Maybe you are looking for