Date and Time Issues

Recently, my iPod touch 2G has been reverting to a different date and time from the actual. The time zone is set on eastern time (Atlanta USA) but it keeps changing the date to February 8, 2009 and 11:09PM. Even after I change it in general settings, it goes back to the other after time.
Any ideas?

I've heard about this little bug and it has happened to me on a few occasions.
Apparently, it appears when you put your PC to sleep when iTunes is open. So when you resume from Sleep Mode, make sure you close iTunes, then connect your iPod or re-open iTunes.

Similar Messages

Time Machine: Mavericks backup date and time issues

Time Machine: Troubleshooting backup issues
re: http://support.apple.com/kb/HT3275
"Messages you may see after clicking the red "i" include:"
I am getting a message not listed at this page. My Time Machine fails to backup to my USB3 Passport External Drive with the error code:
"Time Machine couldn't complete the
backup to "2T PP".
The system date and time is incorrect."
I have the Date & Time preference set to:
"√ Set date and time automatically: Apple Americas/U.S. (time.apple.com)"
and it seems to be the correct time.
The Language & Region prefs, advanced, Dates tab is set to defaults but I cannot get TM to backup and the same error occurs.
How can I remedy this?

Because you have just loaded a new operating system and a complete backup occurs is my understanding.

HT203483 Date and time issue in iPhone 5c

I have update with latest firmware but date and time proble not solved

Hello komalsingh235,
If I understand correctly your phone is not automatically getting the correct date and time. Use these steps from the following article. If the troubleshooting does not correct it, then it also has a resource for you to get additional support:
iOS: Troubleshooting issues with date and time
If the option to enable date and time automatically is available, turn it on. Tap Settings > General > Date & Time.
Ensure that your time zone is set up correctly. Tap Settings > General > Date & Time > Time Zone.
If the incorrect date, time, or time zone is being set up automatically on the device, please notify your cellular provider. In the meantime, tap General > Date & Time and turn off Set Automatically. Then set the appropriate time and time zone manually.
Thank you for using Apple Support Communities.
All the best,
Sterling

Date and Time Issue for Mult Org...

Hello,
How can I manage the date time, if my organizations have different plant and location?
I.e. The database server located in Pacific Time zone and the application may access from new plant German time zone.
Whenever the German business center enters any sales transaction it should take German current date and time instead of Pacific Time.
Pls advice me
Thanks,Raghu.K

Hi,
While defining a Location, you can mention the time zone for that location and also the inventory organisation to which this location belongs.
So, this location can be assigned to your organisations. You can access the time zone according to the location you select.
regards

Date and Time Issue.

I have date and time with different format , Need in Single date and Time format.
Input
13/03/15 09:09
13/03/15 07:39
13/03/15 08:09
13/03/15 08:51
3/13/15 09:39:14 AM
3/13/15 09:38:14 AM
3/13/15 09:37:59 AM
3/13/2015 09:37:59 AM
Problem with the below Output
01/01/01 12:00 AM
01/01/01 12:00 AM
01/01/01 12:00 AM
01/01/01 12:00 AM
13/03/15 09:39 AM
13/03/15 09:38 AM
Output required in the below format for all of the above date and Time with proper date & time
13/03/15 09:39 AM

Indudhar,
I don't know if the following will help or not, but hopefully you can see what I'm doing and modify it to give you the string format of the DateTime the way you want it:
ption Strict On
Option Explicit On
Option Infer Off
Public Class Form1
Public Enum DateTimeFormat
LongDateLongTime
LongDateShortTime
ShortDateLongTime
ShortDateShortTime
LongDateOnly
ShortDateOnly
LongTimeOnly
ShortTimeOnly
End Enum
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) _
Handles MyBase.Load
' Test it here...
Stop
End Sub
Private Function GetFormattedDateTimeString(ByVal dt As DateTime, _
ByVal formatType As DateTimeFormat) As String
Select Case formatType
Case DateTimeFormat.LongDateLongTime
Return String.Format("{0} {1}", _
dt.ToLongDateString, _
dt.ToLongTimeString)
Case DateTimeFormat.LongDateOnly
Return dt.ToLongDateString
Case DateTimeFormat.LongDateShortTime
Return String.Format("{0} {1}", _
dt.ToLongDateString, _
dt.ToShortTimeString)
Case DateTimeFormat.LongTimeOnly
Return dt.ToLongTimeString
Case DateTimeFormat.ShortDateLongTime
Return String.Format("{0} {1}", _
dt.ToShortDateString, _
dt.ToLongTimeString)
Case DateTimeFormat.ShortDateOnly
Return dt.ToShortDateString
Case DateTimeFormat.ShortDateShortTime
Return String.Format("{0} {1}", _
dt.ToShortDateString, _
dt.ToShortTimeString)
Case DateTimeFormat.ShortTimeOnly
Return dt.ToShortTimeString
Case Else
Return String.Empty
End Select
End Function
End Class
I hope that helps. :)
Still lost in code, just at a little higher level.
No Frank, Same Problem.....Kindly help me X1 = 14/03/15 19:30
I need time Diff of now and X1
Dim myDateTime As DateTime = GetFormattedDateTimeString(X1, DateTimeFormat.ShortDateOnly)
myDate = myDateTime.ToString("dd/MM/yy")
myTime = myDateTime.ToString("hh:mm tt")
Dim myDateTime1 As DateTime = Now
Dim myDate1 = myDateTime1.ToString("dd/MM/yy")
Dim myTime1 = myDateTime1.ToString("hh:mm tt")
Dim diff As TimeSpan = myDateTime1.TimeOfDay - myDateTime.TimeOfDay
Dim diffString As String = String.Format("{0:00}:{1:00}:{2:00}", _
Math.Abs(diff.Hours), Math.Abs(diff.Minutes), Math.Abs(diff.Seconds))

X2-01 Date and Time issues

New phone. How do I get the date to change everyday without doing it manually? Also, how do change the time from military to non-military? Tks.

Go to settings>time and date settings>auto update of time and date>on.
Settings>time and date settings>time format>12 hour.
Hope this helps.

Date and Time issue on 5C

I resently updated my daughters iPhone 5C to IOS 8.1.1, but now the time and date is off. I 've tried to turn off "Set Automatic Time" based on cellular info, and set the time manually, but after a minute or so, the time is way off Again (as in several hours). Also it's to days behind now. Nothing happens when i switch the Automatic Time on Again.
I've tried to hardware reset the phone, reinstall the OS via PC, and change the time Zone, but nothing seems to Work.

Double checked, and the localization in iTunes for the account on the PC is set til Copenhagen, Denmark, så that's not the issue.

Inserting Date and Time Issues

Hi All,
I have a very simple select query as follows... UPLOAD_DATE is held in table1 in the following format:     23/01/2012 13:04:36
<cfquery name="test" datasource="test">
SELECT UPLOAD_DATE
FROM     TABLE1
</cfquery>
and I loop around the above query to insert into another table...
<cfloop query="test">
     <cfquery name="make_tfer2" datasource="test">
          INSERT INTO TABLE2
               (UPLOAD_DATE)
          VALUES
               (#test.UPLOAD_DATE#)
     </cfloop>
</cfloop>
But, when I insert into table2 it inserts the date as: 23/01/2012 .... How do I correct this code so I can insert the date as:   23/01/2012 13:04:36 ????

\'G\' wrote:
Hi All,
I have a very simple select query as follows... UPLOAD_DATE is held in table1 in the following format:     23/01/2012 13:04:36
<cfquery name="test" datasource="test">
SELECT UPLOAD_DATE
FROM     TABLE1
</cfquery>
and I loop around the above query to insert into another table...
<cfloop query="test">
     <cfquery name="make_tfer2" datasource="test">
          INSERT INTO TABLE2
               (UPLOAD_DATE)
          VALUES
               (#test.UPLOAD_DATE#)
     </cfloop>
</cfloop>
But, when I insert into table2 it inserts the date as: 23/01/2012 .... How do I correct this code so I can insert the date as:   23/01/2012 13:04:36 ????
Two suggestions (just to answer the immediate question):
1) Make sure the datatype of the column Upload_date in Table2 is datetime (not just date).
2) Try something like
<cfoutput query="test">
    <cfset date=dateFormat(parseDatetime(upload_date),"dd/mm/yyyy hh:mm:ss")>
    <cfquery name="make_tfer2" datasource="test">
        INSERT INTO TABLE2 (UPLOAD_DATE)
        VALUES #date#
    </cfquery>
</cfoutput>

Date and Time issue oracle job

i have wriited oracle job to execute my procedure and the job has to execute the procdedure at 11:30 pm every day.
following are the parameters of the JOB.
next_date => TRUNC(SYSDATE) + 23/24+ 0.5/24
interval => 'SYSDATE + 1'
But it is not executing the procedure at 11.30 pm everydat. Waht coud be wrong in the schedule part. please help me in this.

Hi,
born2win wrote:
i have wriited oracle job to execute my procedure and the job has to execute the procdedure at 11:30 pm every day.
following are the parameters of the JOB.
next_date => TRUNC(SYSDATE) + 23/24+ 0.5/24
interval => 'SYSDATE + 1'
But it is not executing the procedure at 11.30 pm everydat. Waht coud be wrong in the schedule part. please help me in this.When you use SYSDATE in the interval parameter, it is the time when the job finishes , not the time when the job begins (which may not be the time you wanted the job to begin, if the database is down).
If, regardless of when a job finishes, you want it to run again at 11:30 PM the next day, then use
interval => 'TRUNC (SYSDATE) + 1 + (23.5 / 24)'Unless you're using a very old version of Oracle, you should use dbms_scheduler instead of dbms_job. See
http://docs.oracle.com/cd/B28359_01/appdev.111/b28419/d_sched.htm#CIHHBGGI

Cisco Unified CM Administration ver 7.1 date and time issue

We are using Cisco Unified CM Administration ver 7.1. I think this will be an easy one. I've done it before and need to do it again. Is there an easy way to adjust the time that appears on all our Cisco 7945 phones. It is out by a dozen of minutes... Thanks Don

The latest release of CUCM 7.1.5 is 7.1.5.35901-1, so you can always try that. Link to download:
http://software.cisco.com/download/release.html?mdfid=282421166&flowid=45895&softwareid=282074295&release=7.1(5b)SU6a&relind=AVAILABLE&rellifecycle=&reltype=latest
The latest version of CUCM software is 9.1.2 with 10.0 coming out any day, thought those would be considered major upgrades and would require some planning, on i.e. ensure hardware compatibility, all software compatibilities, ELM licensing migration, etc.
HTH,
Chris

Cisco SPA525g2 Date and time Not Synced with the PBX server

Hello,
We have a couple of SPA525g2 phone connected and registered to our PBX server. We were able to configure 3 extensions on different lines of the phone. However, at times we were encountering issues with the other lines configured on the phone. There are times wherein 1 extension configured on the phone is having one way audio issue, but the other extensions configured on the same phone is working fine. and we have to reboot/reset the phone several times for all the extesions configured on the phone to work.
Also, whenever we reset the phone, the date and time will be way way behind the current date and time, eventhough we have already set the correct date and time before we reset the phone.
How can we resolve the one way audio issue on 1 or 2 extensions of the phone, while the other extensions configured to it is working fine?
How can we make the phone sync the date and time with the PBx server?
Any input and help regarding this issue is greatly appreciated...
Btw, date and time issue not sync with the PBX server is just happening on SPA525g2, we have other phones like SPA303, SPA504, and SPA232D/SPA302D. All other phones' date and time is in sync with the server even though we reset them except SPA525g2.
Thank you very much,

PeterMacSF,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

HT1595 Setting date and time

I cannot get the Apple TV to move past the date and time issue. We have had it over a year and never had this problem. We have restarted both the Apple TV and the wireless router. Internet is working on all other devices. Help!

Hey maradi, have you figured out the issue? I'm having the same EXACT problem!!!

Issue with Date and Time Picker on Windows 8.1 and Office 2013

We are having a issue with the Developer tool in Excel called the Date and Time Picker which puts a calendar field into the spreadsheet where you can select a date from the calendar popup
If we change this date field and then save and close and reopen it reverts back to the previous date before the change was made
If we do the same process on a Windows 7 machine with Office 2013 it saves the changes we made to the Date and Time picker field

Hi jdono2,
I'm using Windows 8 and Office 2013,and I can't reproduce this issue.
Please make sure you have already upgraded to the latest version of excel, try to reregister the MSCOMCT2.OCX.
Also you can try to use another date picker add-in to test this issue.
http://social.msdn.microsoft.com/Forums/office/en-US/36f83f24-cd76-4f8e-aa7b-5f166666e7d3/excel-2013-popup-calendar?forum=exceldev
Wind Zhang
TechNet Community Support

Reminder app not working correctly, issue started around Sept. 1,2014. Will not allow me to set date and time for a reminder.

Today I noticed an issue with my Reminder app on my IPhone 5s. Using OS 7.1.2. I called Apple, and the tech didn't know what he was doing and just trying different things.The reminder app will not let me set a date and time for reminder. Finally he escalated the call to a senior advisor who was rude, arrogant and unprofessional. He insisted the Reminder App was updated with the new update of IOS September/October 2013. Not true, the issue just started about 5 days ago August 31,2014. Now there is an additional reminder line for reminder entries that I have to use and have to transfer all my reminders manually from the other part of the app. The feature does exist; if I try to set a date and time for the reminder it appears for 1-2 seconds and then disappears.
Has anyone else noticed this issue?

He insisted the Reminder App was updated with the new update of IOS September/October 2013. Not true
Yes, it is true.
iOS 7 was released 18 Sep 2013. At this time, the Reminders app was updated (with most everything else).
the issue just started about 5 days ago August 31,2014.
Your issue just started but the app was not updated 5 days ago.
Now there is an additional reminder line for reminder entries that I have to use
I don’t understand what this means...
Open Reminders, type the reminder, tap the i at the end, turn on Remind me on a day and enter the date/time.

Date and Time stamp wrong in Console / battery issue?

Since April the date stamp in Console reads 12/31/69. The date and time on the system is correct. I know these are current Console logs. My battery did go bad around this date, but I bought a new one and have had no power issues.
Also kernel task seems to be running high -- any connection?
Here's a small sampling of the console log from the point where it changed:
4/8/09 12:16:16 PM kernel AirPort: Link Down on en1
4/8/09 12:16:17 PM kernel System Sleep
12/31/69 6:00:33 PM kernel Darwin Kernel Version 9.6.0: Mon Nov 24 17:39:01 PST 2008; root:xnu-1228.9.59~1/RELEASE_PPC
12/31/69 6:00:25 PM com.apple.launchctl.System[2] fsck_hfs: Volume is journaled. No checking performed.

Sean Huck wrote:
Interesting. Can you tell me why a simple editor like iMovie can do this but Final Cut can't? I'm curious...it seems simple enough.
Yes, it seems simple. No, we can't tell you but I can tell you we've been seeing this same question here since FCPv1.
There's a feedback submission slot somewhere on this forum. It might not do any good but it should make you feel better to add your suggestion to the box.
bogiesan

Date and Time Issues

Similar Messages

Maybe you are looking for