Date and time loss

k7n2delta2 mobo constantly loses date and time settings every time the computer is restarted. Ive changed the battery. but it didnt help. this has been going on since i bought the mobo 2 years ago and i would just adjust it as i needed now im fed up. anyone hear of this before

Quote from: Fredrik on 19-October-08, 22:48:15
Save&Exit after the changes in BIOS.
Make sure the CMOS jumper is in the save/hold position.
I checked the BIOS & jumper settings, they are all good. And yes I change the date and time in windows. The problem is that after the pc is shut down for any long period of time ie. over night, the settings are lost. A simple restart doesn't cause any problem at all. When I get home from work tonight Ill remove the new battery that i installed and check it for charge loss.

Similar Messages

  • Loss of date and time...constantly

    How is this fixed? I know to reset the date and time but each time I use it...?
    Does the iBook have a clock PRAM battery? How do I fix this?
    FYI: My iBook has been sitting for years since Ive been using my iMac.

    Hey Steve,
    Look at this post:
    http://discussions.apple.com/thread.jspa?messageID=10853839&#10853839
    we've been talking about that exact issue.
    Richard

  • Show date and time in menu bar won't stay selected

    Using 10.6.7 with all updates as of the time I am writing this.
    Show date and time in menu bar is unselected and unselectable. When I select it (click it) it will unselect itself. I will see the checkmark for 1/2 a second, but won't stay selected.
    I've reparied permissions in the Disk Utility as described by a similar post (on an older version of the OS) with no luck.
    At a little bit of a loss. Spending the mandatory 30 minutes with various forms of Google searches with no luck.
    Looking for new ideas other than an OS restore.
    David

    Looking for new ideas other than an OS restore.
    Restart?

  • Date and time settings NOT sticking help me please :(

    My date and time is stuck in cupertino ????
    Doesnt matter what I do with the correct london setting as soon as a go to the home screen and back its changed back to cupertino??
    Im at a loss.... ?????????
    Ive synced and everything??????????

    I had the issue after using the reset button within the iphone then re syncing with itunes.
    Later I did a full restore from itunes where it downloads software 2 and installs, then I re synced all my music ect!!
    Problem gone I got London to stick, and my twitter app is showing correct times again. To be honest I dare not look in date and time again in case I tempt fate, but of now all times on apps are correct...lol

  • Changing Date and Time

    I have selected both photos and event separately in several attempts to change date and time in Photos/Adjust Date and Time without success. Each time I have attempted to do so another date and time has replaced the previous one but each has been incorrect. Some dates have been inserted dating back several centuries!! The time as well as the date has been incorrect.
    I would appreciate suggestions and help in making the change correct.
    Thanks.
    Vernon

    I also have this problem. One folder in particular is affected; within it after a few times to get it into the 2000's from 1900's, it is currently showing 1539.
    I am at a loss since the batch change roller lets me select the correct year in iphoto.
    I thought it might be a glitch in the older software so upgraded to the '11 iphoto. This made no difference at all.
    This is still an issue unless the original poster got an answer or worked it out him/her self.
    I also use Picasa on the same system but since it gets the photos from iphoto, it gets its errors there too.

  • Date and Time in Sender File Adapter Target Directory

    Hi there,
    is there a way of using Date and Time from XI to the Target Directory naming? To use variable substitution some fields of the message had to contain that date and time information, which is not our case.
    For filename you can use "add time stamp" option, but and for target directory?
    Thanks and regards,
    Henrique.

    > <i>Do you have further information on how to perform
    > this with shell commands?</i>
    > >> You need to write a shell script. This script will
    > add the date/time stamp into the folder in the target
    > system. This shell script is executed from the File
    > adapter. So once the file is written into the target
    > directory, then it will rename the directory.
    Hi there, Moorthy
    We've tried to write that shell script that you mentioned, but now we have a few doubts on how to make it create the proper directory.
    In the file adapter, my target directory is "/%var1%/%var2%/", where %var1% and %var2% are variable substitutions, referencing data which comes from the payload. Now, I need the shell script to append "/<Year>/<Month>/" in the target directory. But where to archive the script? If it stays in the root directory, than how to make it create "/<Year>/<Month>/" folders inside a directory which is variable (/%var1%/%var2%/)?
    Is there a way of passing %var1% and %var2% as parameters for the shell script?
    Thanks a lot,
    Henrique.

  • Unable to insert date and time when using date datatype

    Hi
    I am hitting a bit of a problem when using the date datatype. When trying to save a row to the table where the field it throws an error ora 01830 and complains about converting the date format picture ends...etc. Now when I do the insert, I use the to_date function with the format of "dd-mon-yyyy hh24:mi:ss". Of course, when I remove the time element, everything is perfect.
    Checking sysdate, I noticed that the time element wasn't be displayed, and I used alter session set nls_date_format to set the date and time I want to save to the table, which worked!
    Then based on advice in a previous thread to permanently fix the problem, I used alter system set nls_date_format ="dd-mon-yyyy hh24:mi:ss" scope=spfile; This showed that it was altered, and I can see the setting in the em. In sqlplus, I shutdown the database, and restarted with startup mount; alter database open; and then selecting sysdate, it still shows the date as dd-mon-yy, and still no time! Checking the em, and looking up the nls_date_format the setting is still shown as "dd-mon-yyyy hh24:mi:ss".
    So, my question is this - what am I doing wrong? Why can't save date and time using date in Oracle 11g?????
    Thanks

    user633278 wrote:
    Hi
    I am hitting a bit of a problem when using the date datatype. When trying to save a row to the table where the field it throws an error ora 01830 and complains about converting the date format picture ends...etc. Now when I do the insert, I use the to_date function with the format of "dd-mon-yyyy hh24:mi:ss". Of course, when I remove the time element, everything is perfect.
    Checking sysdate, I noticed that the time element wasn't be displayed, and I used alter session set nls_date_format to set the date and time I want to save to the table, which worked!
    Then based on advice in a previous thread to permanently fix the problem, I used alter system set nls_date_format ="dd-mon-yyyy hh24:mi:ss" scope=spfile; This showed that it was altered, and I can see the setting in the em. In sqlplus, I shutdown the database, and restarted with startup mount; alter database open; and then selecting sysdate, it still shows the date as dd-mon-yy, and still no time! Checking the em, and looking up the nls_date_format the setting is still shown as "dd-mon-yyyy hh24:mi:ss".
    So, my question is this - what am I doing wrong? Why can't save date and time using date in Oracle 11g?????
    ThanksYou most certainly can save the time. A DATE column, by definition stores date and time. What you describe is a presentation problem, and setting nls_date_format at the system as an init parm is the weakest of all settings as it is overridden by several other locations.
    without seeing the exact sql that produced the error (not just your description of what you think you were doing) it is impossible to say for sure.
    However, I'd suggest you read http://edstevensdba.wordpress.com/2011/04/07/nls_date_format/

  • DVD camcorder (VIDEO_TS) - preserve clip date and time

    I had asked this question on the forums a long time ago but iMovie did not seem to be supporting it reliably at the time. But since some time has passed, I wanted to check if iMovie '09 can import clips from a mini DVD (those used in camcorders to capture video directly on to DVD media) AND preserve the clip's date and time.
    What I see is that the first clip gets some date and time related to the event's date and time (perhaps the start time of the first clip?) but all the other clips which are imported, get timestamps of 1 second after that first clip's timestamp.
    These are all my home videos and in order to keep each clip short, I have had the habit of pausing after about a minute or two, resulting in MANY clips over MANY DVD's, so manually updating date and time is absolutely the last resort.
    The DVD player can see the clip date and time correctly, and so could the camcorder (I have since sold the darn thing!) so I know that information exists somewhere in the DVD, but it seems like iMovie is unable to "see" it.
    Any help would be appreciated, including programmability hints.

    Thank you for your post.  I figured out why iMovie was assigning today's date to everything that I imported.  It turns out that many of my video files did not have a real "created" date--some had no date at all and some had Wednesday, December, 1967 or 9 (I think).  iMovie defaulted today's date in both of these situations.  I took your advice and ot A Better Finder Attribute and easily converted all of the files using the option to copy the "modified date" into the "created date" attribute.  Now everything imports correctly into iMovie.

  • How can I get rid of the dates and time on my Notes

    How do I get rid of the dates and times on my Notes that appeared when I updated to 8?

    Yes, it's seems like a poor design decision.
    By putting the date on the line below the Note title in the Notes Index, the app shows half the number of notes per page AND if you have a large number of notes, it takes twice as long to stroll down.
    I doubt the designer actually uses the app. 
    TSAW

  • How do I delete duplicate songs? (date and time stamp are identical

    I put my cd collection in itunes and now have duplicates of most songs (don't know how I did that). The duplicates have the exact same date and time, so the method to delete a "newer" duplicate will not work. Is there a simple way to delete exact duplicates from the itune library?

    This application can help.  It's US$15.  http://dougscripts.com/apps/dupinapp.php

  • Problem with date and time preference

    hi there,
    i set my date and time and the time support yesterday and then i click the lock button to prevent further chance and last night i shut down my iMac, open it again in the morning the lock open back up and the timezone support change.
    i redo that again and restart my iMac the same thing happen. is this a problem with my software or everyone have this problem?
    any idea what should i do?
    thanks in advance
    regards AL

    Having the same problem, & am running Parallels (which I haven't used for some time) not boot camp. I tick the box labeled "Set time automatically" & lock the "click the lock to make changes". When I reboot, the Lock is unlocked and the "set time...." is unticked. Any ideas. Cheers.

  • Problem with date and time syncing itouch to macbook

    i have a problem with the date and time on ical when i sync my itouch4 w my macbookair. whatever i entered into my calendar in itouch will appear different in my ical( with a 6 hrs advance difference) and the alarm i set on my itouch in the calendar doesnt ring at the right time as set even though it is shown the time that i wanted.
    Both my macbook n itouch are set to the same time zone and i have checked this many many times n the time is the same on both machine. but i just dont understand why is there a time difference when synced and my alarm just dont sound at the time it was supposedly set. it rings hours later n showing a different time that it was set but in the parenthesis the right time that i had set it.
    One time my computer ran out of battery n went into sleep mode and when i open it again, the time n date setting was all off. which im surprised why it had gone off. So did this create the problem i have now with the date n time sync or something else?
    please help!!!!

    Having the same problem, & am running Parallels (which I haven't used for some time) not boot camp. I tick the box labeled "Set time automatically" & lock the "click the lock to make changes". When I reboot, the Lock is unlocked and the "set time...." is unticked. Any ideas. Cheers.

  • Odd Date for Current Date and Time

    I am modifying a column in a list to get current date and time using =TODAY()+NOW() in the calculated field and get a time that is behind by 1 hour but the date is 4 months 114 years ahead (2128). How can I fix this field?

    http://sharepointsolutions.com/sharepoint-help/blog/2011/04/how-to-add-and-subtract-hours-and-minutes-from-date-and-time-fields-in-sharepoint-lists/

  • Need help in using SQL in a jsp file to compare date and time

    hi every one,
    Actually I am doing a project using JSP. I need to compare a date field in the database (MS Acess) to the current system date and time. I have to do this in a select statement.
    I have alredy defined a variable of type Date in the JSP file and I am comparing this variable to the date in the database through a select statemant.
    Here is what I am doing
    SimpleDateFormat sdf = new SimpleDateFormat("yyyy-mm-dd hh:mm:ss");
              java.util.Date today = new java.util.Date();
              String myDate=sdf.format(today);
    query = "SELECT Car_ID, Model_ID, Year, Ext_Color, Price from Cars where EDate <= "+myDate+" ;";
    EDate is the feild in the database and it's format is (5/12/2008 5:29:47 PM) it is of type Date/Time in MS Acess.
    when I execute the query it gives the following error
    SQL error:java.sql.SQLException: [Microsoft][ODBC Microsoft Access Driver] Syntax error (missing operator) in query expression 'EDate <= 2008-10-16 08:10:07'.
    I hope any one can help me with that error and answer my question, I've tried too many things but nothing helps
    Thanks in advance :-)

    Hi,
    When the comparision is needed to be done with the current date , we don't need to send in Java
    Date then format it and compare with MS Acess Date.
    In MS Access we have Date() function which will give you the current date.
    So you can try rewriting your query as following :
    query = "SELECT Car_ID, Model_ID, Year, Ext_Color, Price from Cars where EDate <= Date() ;"; ---------------------
    Hope this helps.
    Thanks

  • Function Modules for Data and Time

    Hi all,
              I need 2 function modules for date and time. when we pass current data(sy-datum) and current time (sy-uzeit) into function modules, shoud get date in <b>dd/mm/yyyy or dd.mm.yyyy</b> and time in<b> HH:MM:SS</b> formats.
    Thanks in advance

    Hi Ranjith,
    i think this will b usefull for you..
    SAP Bar Chart Function Modules and what they are used for
    Function module
    Used for
    BARC_GRAPHIC_PBO
    Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
    BARC_GRAPHIC_PAI
    Analyzing data returned by the graphic
    BARC_SET_TIME_AXIS
    Setting start and end of time axis
    BARC_SET_OPTIONS
    Setting options
    BARC_ADD_CHART
    Creating a chart
    BARC_SET_CHART_ATTRIB
    Setting chart attributes
    BARC_ADD_SECTION
    Creating a section on the time axis
    BARC_SET_SECTION_ATTRIB
    Setting section attributes
    BARC_ADD_RIBBON
    Adding a ribbon to the time axis
    BARC_SET_RIBBON_ATTRIB
    Setting attributes for ribbons in the chart
    BARC_ADD_GRID
    Adding a time grid
    BARC_SET_GRID_ATTRIB
    Setting grid attributes
    BARC_ADD_LAYER
    Adding a layer (graphic elements)
    BARC_SET_LAYER_ATTRIB
    Setting layer attributes
    BARC_ADD_LINE
    Adding a line
    BARC_ADD_CALENDAR
    Creating a calendar
    BARC_SET_CALENDAR_ATTRIB
    Setting attributes for a calendar
    BARC_ADD_TIME_PROFILE
    Creating time profiles
    BARC_SET_TIME_PROFILE_ATTRIB
    Setting attributes for time profile
    BARC_ADD_INTERVAL
    Adding a time interval
    BARC_SET_INTERVAL_ATTRIB
    Setting time interval attributes
    BARC_ADD_TIME_OBJECT
    Creating a time object
    BARC_CONVERT_DATE
    Creating a date string in bar chart format
    BARC_REVERT_DATE
    Converting a date string in bar chart format to date and time
    BARC_ADD_DATELINE
    Creating a date line
    BARC_SET_DATELINE_ATTRIB
    Setting dateline attributes
    BARC_GET_PROFILE_CONTENTS
    Obtaining profile contents for customizing a chart
    BARC_GET_COLUMN_WIDTH
    Selecting new column width
    BARC_SET_COLUMN_WIDTH
    Setting the column width
    BARC_GET_TEXTINDEX
    Obtaining the text index of a field
    BARC_SET_LABELS
    Positioning the chart display
    BARC_SET_COLUMN_ATTRIB
    Setting column attributes
    BARC_SET_ROW_ATTRIB
    Setting row attributes
    BARC_SET_ROW_HEIGHT
    Setting the line height
    BARC_SET_MAXCHARTS
    Setting the maximum number of charts sent
    <b>If its usefull reward points
    </b>

Maybe you are looking for