Date and Time lost when upgraded to PSA/SE 3.0

I have upgraded from Photoshop Album Starter Edition 2.0 to 3.0 - my tags seem to be intact, but the dates on all of the photos reverted back to January 1, 2003 regardless when I took them. There was no warning about this happening, no recommendation to back up the files in a way to save the date info. I had spent hours posting corrected dates into many of my photos when accessed by PSA/SE 2.0 only to have all that work dissappear once the upgrade was installed. I liked being able to search for photos based on approximate date taken. I realize there is not likely any quick way to restore the dates, but if there is I'd sure like to know.

When updating I just followed the prompts. I did not choose to cusom install anything. I let the software do all the work.
A large number of my photos are not in the "Adobe" file and must be reconnected as well. I was hoping that once reconnected the date would return, but, sadly, I was mistaken. As I had mentioned when I first installed 2.0 I had to change the dates and times of all my pre - existing photos. They had also defaulted to January 1, 2003. Now I'm back to square one with them all.

Similar Messages

  • HT3140 put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time  always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bou

    put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time  always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bought this computer

    It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
    As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
    Was there an update maybe ?

  • Date and time reset when batery is empty

    the date and time reset to initial state when the battery is empty, what should i do, thanx

    Moy666 wrote:
    Hi TJK, Thanx for answering,
    My MBP have already a three months bought, what i should do, call to apple or to dealer?
    I supposed its in warranty yet. THX
    Your MBP has a one year hardware warranty on it.
    As Trey suggested, it wouldn't hurt to try an SMC reset. If that doesn't work, you definitely want to contact AppleCare so you get it taken care of under warranty.

  • Hello everyone, How do I add by default a date on the actual E-mail page the date and time of when I have sent the e-mail ? Thank you very much for your suggestions. Kind regards, Christopher H. Bull, Birmingham, UK.

    Birmingham, Thursday 2. Feb. 2012
    To whom it may concern,
    I have an issue regarding the e-mail system, and I wanted to know how I can add a default that the date and time is added automatically to the E-mail page everytime I draft a new e-mail.
    Does anyone know how do create a "plug-in" to enable me to have the date and t ime posted on the e0-mail page every time i send a new e-mail ?
    If there is a plug in which is compatible with Lion iMac computers thart insert the date and time into every E-mail I send ?
    Kind  regards
    Christipoher H. Bull
    E-mail: [email protected]

    This supports macros and variables, it doesn't specifically state date and time, but if it supports variables I'd be surprised if it didn't have variables for those:
    http://email.about.com/cs/mailplugins/gr/mailtemplate.htm
    This one also supports variables and may do what you want:
    http://itunes.apple.com/gb/app/logical-mail-free/id451881152?mt=12
    You may want to look for more, I found those by googling 'mac email templates variables'.

  • Date and time lost

    seems that everytime I reboot this G4 macbook I need to reset the time and date.
    Is there somewhere to make the time and date stick?

    Try resetting PRAM…
    http://docs.info.apple.com/article.html?artnum=2238
    … and failing that it's possible that you have a bad internal battery (which is used to help store this information). Hopefully a PRAM reset will resolve this.

  • Script to find locks in Database with Date and time.

    Hi all,
    I used to have a script which i have lost now due to a recent laptop crash. This script used to find locks in the database.. along with the date and time since when it is locking the session.
    It was quite a comprehisive one. I think i found it on this forum only, but not able to find it now. Can someone please help me find one such comprehensive script.
    Currently I am using this script.. which is also good.. but does not have the date and time stamp on it. Is there something better.?
    SET LINESIZE 165
    SET PAGESIZE 66
    COLUMN oracle_user     FORMAT a15      HEADING 'Oracle User'
    COLUMN usercode        FORMAT a12      HEADING 'SID/Serial#'
    COLUMN os_user         FORMAT a10      HEADING 'O/S User'
    COLUMN program         FORMAT a25      HEADING 'Program'
    COLUMN mode_held       FORMAT a15      HEADING 'Mode Held'
    COLUMN mode_requested  FORMAT a15      HEADING 'Mode Requested'
    COLUMN lock_type       FORMAT a15      HEADING 'Lock Type'
    COLUMN object_name     FORMAT a30      HEADING 'Object Name'
    COLUMN lock_time_min   FORMAT 999,999  HEADING 'Lock Time (min)'
    SELECT
    s.username                                 oracle_user
    +, l.sid || '/' || s.serial# usercode+
    +, s.osuser os_user+
    +, s.program program+
    +, DECODE(l.lmode,+
    +1, NULL,+
    +2, 'Row Share',+
    +3, 'Row Exclusive',+
    +4, 'Share',+
    +5, 'Share Row Exclusive',+
    +6, 'Exclusive', 'None') mode_held+
    +, DECODE(l.request,+
    +1, NULL,+
    +2, 'Row Share',+
    +3, 'Row Exclusive',+
    +4, 'Share',+
    +5, 'Share Row Exclusive',+
    +6, 'Exclusive', 'None') mode_requested+
    +, DECODE(l.type,+
    +'MR', 'Media Recovery',+
    +'RT', 'Redo Thread',+
    +'UN', 'User Name',+
    +'TX', 'Transaction',+
    +'TM', 'DML',+
    +'UL', 'PL/SQL User Lock',+
    +'DX', 'Distributed Xaction',+
    +'CF', 'Control File',+
    +'IS', 'Instance State',+
    +'FS', 'File Set',+
    +'IR', 'Instance Recovery',+
    +'ST', 'Disk Space Transaction',+
    +'TS', 'Temp Segment',+
    +'IV', 'Library Cache Invalidation',+
    +'LS', 'Log Start or Log Switch',+
    +'RW', 'Row Wait',+
    +'SQ', 'Sequence Number',+
    +'TE', 'Extend Table',+
    +'TT', 'Temp Table',+
    l.type)                                 lock_type
    +, o.owner || '.' || o.object_name+
    +|| ' - (' || o.object_type || ')' object_name+
    +, ROUND(l.ctime/60, 2) lock_time_min+
    FROM
    v$session     s
    +, v$lock l+
    +, dba_objects o+
    +, dba_tables t+
    WHERE
    l.id1            =  o.object_id
    AND s.sid            =  l.sid
    AND o.owner          =  t.owner
    AND o.object_name    =  t.table_name
    AND o.owner          <> 'SYS'
    AND l.type           =  'TM'
    ORDER BY
    +1+
    +/+

    What Brian said is true so are your sure your query was not just reporting the start time of the current transaction from v$transaction.start_time, or the start time of the session: v$session.logon_time, or perhaps the time since the last database call (v$session.last_call_et) which for an active session would be the time the current SQL statement has been running?
    HTH -- Mark D Powell --

  • Resetting the date and time after the phone has be...

    Hi,
    I keep having to reset the date and time very time I turn my phone off. I was thinking it was to do with the battery so I fully charged it, turned it off then turned it on again and it asks me for the date and time.
    I only noticed this because I've had exams and I have to turn my phone off for them.
    Could it be a dying internal battery?
    I know with computers there's a BIOS battery that controls date and time. When they start to die the date and time are inaccurate.
    I'll have to find time to take it to the 3-Mobile shop either on Sunday or sometime next week if it is an internal battery problem.
    Thanks,
    Omar
    "A Jade stone is useless before it is processed; a man is good-for-nothing until he is educated."

    Hi omar3256
    I believe that there is a very small component on the motherboard which serves this purpose, although whether battery or sort of capacitor I am not certain. The N80 especially seemed to be prone to this failure.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Changing date and time is wrong with time zone problem

    Okay, searched some of the forums, but didn't get the most correct answer to this:
    I just imported all my photos into Aperture from iPhoto (chose to have Aperture manage files as I don't plan on using iPhoto any longer. When I imported the files, I decided to do some organizing by date into folders. no problem.
    In some of my projects, I found some files that I imported from scans or got from others who had a film roll and processed it at a lab, and the dates from those files aren't the dates that the event took place. I went into Metadata>Adjust date and time, and changed the date (not so much the time I'm worried about), and checked the "change the masters" little box, too.
    After I close out of that box, the picture has the wrong date. I've determined this is because of the time zone support. I currently live in Japan, and I would like my photos here to show up as the date in the place they were taken. I think the date I enter, it thinks is the date I'm currently in (GMT +9), but aperture chooses to convert the date as if I was saying "hey, the picture I took happened on "date" in GMT +0:00)" which then makes it look in the metadata view as if it happened a day earlier.
    Any imported photos come in as the correct date and time and correct time zone, as far as I can see. It's just when I change the date and time it thinks I mean to have aperture convert it to GMT + 0:00. (but on a little more of a funny side... older pictures that happened in other time zones back in the states it lists the correct date and time for when the picture was taken, but "says" it's GMT +9:00) (another issue I'll deal with later maybe!)
    Hope I've described it in such a way that you can get it.

    I changed time and now my MacBook won't work

  • Date and time for credit block and release in Sales document

    Hi.
    For sales document [sales order and delivery], we need to find out the date and time :
    1. when it was blocked from credit block.
    2. when it was released from credit block.
    Is there a standard table that stores these dates and time?
    Tks.
    Rgds,
    Johnhuang05

    Try as in Environment--> Changes in sales Order.
    Or VKM2
    Hope this satisfies.
    regards,
    Ganesh Sabnis

  • Setting date and time?

    When I start my Apple TV it won't complete the setting data and time prompt when it starts up.  The wireless network is a full strength and connected.  Everytime i try to type my apple user name and password to start home sharing it says that I have one or the either inncorrect.  I've typed it a milion times in the past and to double check i logged out of itunes on the comp and logged back in, so i know i got it right.
    anyone else have this problem?

    Morning spencer.chrisj,
    Thanks for using Apple Support Communities.
    You can resolve many Wi-Fi issues by checking your network connection settings.
    For more information on this, take a look at this article:
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    Look at this part of the article.
    If you are unable to access or play content while connected to a Wi-Fi network
    Best of luck,
    Mario

  • Af:inputDate with both date and time: modal popup forces validation

    Hello,
    I am using an af:inputDate with an af:convertDateTime type='both' (displaying date and time).
    When the calendar popup is shown it's a modal popup. I guess it is because of the type='both'?
    My problem is: when the modal popup is shown I get also the validation popup with errors (for example required fields) which is shown too.
    Maybe someone could help?
    Is there a way to force non-modal popup for this kind of calendar?
    Is there a way to stop validation if I am already displaying another popup?
    Thanks in advance,
    Cindy

    Hi,
    U just override ok cancel button type="none"., inside the <af:panelGroupLayout id="pgl10" layout="horizontal" valign="middle">
    <af:commandButton id="ok" text="Ok" action="#{beanName.okAction}" immediate="true"/>
    <af:commandButton id="can" text="Cancel" action="#{beanName.cancelAction}" />
    </af:panelGroupLayout>
    Regards,
    parame

  • Are all my photos dated and time stamped when they are taken

    Are all my photos date and time stamped when taken?

    Abadfatboy wrote:
    Are all my photos date and time stamped when taken?
    While that data is not visible in the Photo app, yes, it is there.

  • I upgraded to the new IOS, but lost data and apps. When I try and restore the only backup I see is the one made AFTER the lost data. How can I access an older backup from the cloud?

    I upgraded to the new IOS, but lost data and apps. When I try and restore the only backup I see is the one it made AFTER the lost data. How can I access an older backup from the cloud?

    Why don't you talk to apple and find out if backup exists? That conversation with apple will stop your guessing.

  • Why are date and time strings lost when indexing an array in a for loop

    Hi, 
    I have an application where i'm reformatting data from a spreadsheet for graphical display on a LabVIEW dashboard.
    the original spreadsheet has date and time values in separate columns, and i'm merging them and converting to a timestamp value.  But something's not working.  Does anyone know why the string value is lost when the array indexes into this for loop?
    Attachments:
    failed array index.png ‏142 KB

    Can you attach your VI with some typical values? (e.g. create in indicator on the 2D array, run your VI, then turn the indicator (now containing data) into a diagram constant). Place the FOR loop related code and that diagram constant into a new VI and attach it here.
    How many times does the FOR loop run? Could it be that the last element of each 1D array is an empty string? (unless you put a wait inside the FOR loop, you'll never see the other elements in the probe)
    LabVIEW Champion . Do more with less code and in less time .

  • Mag Safe power cord sparks when connected or disconnected--whereupon the MacBook Pro 13'' dumps date and time, and all passwords, plus any/all unsaved information.

    I purchased my MacBook Pro 13" from the Apple Store in Tucson, AZ, in mid-January. Since then, every time the Mag-Safe cord is jostled, not even disconnected, sparks fly from the power terminal on the computer, the computer shuts down, and dumps its passwords, as well as the date and time.
    Any work in progress is also lost.
    I work overseas, and Apple's advice was to give them my credit card number, await shipment of a new power supply and cord, and then, when I return the old power supply and cord, i'd receive a credit. That won't work, as packages from the US to my location take weeks if they arrive at all. There is no Apple Store within a reasonable distance. Or, Apple suggests, when I'm home on leave in mid-June, I should bring the computer to the Apple Store for repair--I have only days in which to do that, but I suppose I'll need to try. My concern is that I'll need to return overseas without my computer and won't be able to retrieve it for months, until my next leave.
    This issue shows up elsewhere online. Is there a short in the power terminal in the computer, or on the Mag-Safe power cord, or within the computer itself? It's a known issue, thus I wonder why it hasn't been fixed.

    Odd, but here's a copy of Page 1 of the links I got:
    Apple Portables: Troubleshooting MagSafe adapters26 May 2011 ... If the spark comes from somewhere other than the blades of the plug, .... Apple Portables: Reducing cable strain on your MagSafe power ...
    support.apple.com › Support - Cached
    Apple - Support - Discussions - Magsafe sparked when plugging into ... 
    2 posts - 2 authors - Last post: 22 FebI plugged my magsafe adapter into my macbook pro (mid 2010 model i think ...
    discussions.apple.com › ... › Power and Batteries on a MacBook Pro - Cached 
    Mag Safe power cord sparks when...: Apple Support Communities6 Jun 2011 ... Mag Safe power cord sparks when connected or disconnected ...
    https://discussions.apple.com/message/15350172
    Show more results from apple.com
    Apple power brick sparks lawsuit • The  Register
    - 4:52am6 May 2009 ... Apple power brick sparks lawsuit ... Apple, for its part, made the MagSafe one of the featured, um, features of the MacBook Pro when it ...
    www.theregister.co.uk/2009/05/06/apple_magsafe_lawsuit/ - Cached - Similar
    My MagSafe sparks everytime - Philippine Mac Users Group 
    10 posts - 6 authors - Last post: 31 Mar 2008Guys, I seem to have a problem, well you  see my MagSafe sparks everytime I plug it into a power source. I'm experiencing this problem at ...
    www.philmug.ph › ... › Mobile Macs › Archives - Cached - Similar 
    @apple MagSafe failure sparking all over the place, not recalled ...1 Jan 2011 ... ryanol: @apple MagSafe failure sparking all over the place, not recalled? Not repairable 79 bucks  later #applefail another design fail for ...
    constantlycomplaining.com/.../@apple-magsafe-failure-sparking-all-over-place,-not-recalled%3F-not-repairable-79-bucks-later- - Cached
    Great Northern Insurance Company sues Apple over fire-causing MagSafe2 Dec 2010 ... Over the past few years, Apple has been on the receiving end of more ... indicating that Apple's MagSafe adapters were prone to sparking and ...
    www.edibleapple.com/great-northern-insurance-company-sues-apple-over-fire-causing-magsafe-adapter/ - Cached
    Amazon.com: Apple MagSafe 60W Power Adapter for MacBook MA538LL/A ...Genuine Apple 60W MagSafe Power Adapter for MacBook A1184 · 3.9 out of 5 stars (11) .... like it was burning.. the covering on the cord melted off.. sparked ...
    www.amazon.com › ... › Laptop Battery Chargers - Cached - Similar
    Insurance company claims Apple's 'dangerous' MagSafe started fire ... 
    40 posts - 29 authors - Last post: 30 Nov 2010A newly filed lawsuit claims that Apple's MagSafe charger, ... Apple to heating, burning and sparking problems with its MagSafe adapters," ...
    forums.appleinsider.com › Future Apple Hardware - Cached 
    Spark it up!!! "Apple announces Magsafe out of warranty ... 
    3 posts - 3 authors - Last post: 19 Aug 2008Info.: "This one concerns faulty Magsafe power adaptors that shipped with MacBook (13-inch Late 2006), MacBook (13-inch), ...
    forums.macresource.com/read.php?1,546534,546743 - Cached 

Maybe you are looking for