Date and time missing from menubar

The date, time, battery, wifi, and spotlight icons have all disappeared from my menubar. I went into my preferences and found that the "show date and time in menu bar" was unchecked so I tried to check it, but it would automatically uncheck itself instantly. I tried rebooting but that didn't change anything

Triple-click anywhere in the line below on this page to select it:
~/Library/Preferences/com.apple.systemuiserver.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

Similar Messages

  • How do I get date and time component from a DATE object?

    Hi All,
    I need to get date and time separately from a DATE object, does
    anyone know what function I should call? GetDate()? GetTime()?
    I need this in a SELECT statement.
    Thanks in advance and looking forward to your early reply.
    Regards.
    Gladywin
    30/11/2001

    Hello,
    See following SQL.
    select to_char(sysdate,'dd/mm/rrrr') today_date,
    to_char(sysdate,'hh24:mi') now_time
    from dual
    Adi

  • How do you edit out the date and time stamp from a photo

    How do you edit out the date and time stamp from a photo

    You can blur it out with retouch
    The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
    Regards
    Léonie

  • Date and time missing in menu bar

    From time to time the date and time disappear from the menu bar.  Other times most of the items disappear from the menu bar.  What causes this?  Yes, a reboot puts them back but a reboot should not be necessary.  Any thoughts?

    Might be corrupted preferences ...
    Type or copy and paste the following:
    ~/Library/Preferences/com.apple.systemuiserver.plist
    Click Go then move the com.apple.systemuiserver.plist file to the Trash.
    Restart your Mac.
    Then monitor the time and date in the menu bar.

  • How to know date and time information from Trace File defaultTrace.X.trc?

    Hi, all.
      i'm using EP 6.0 SP9 patch 1.
      As you know, default trace is written in the <SID>\JC00\j2ee\cluster\server0\log\defaultTrace.X.trc.
      By using the default trace formatter, it shows like the following sample messages.
    #1.5#0011110E7B2000590000000100000A100003EC71562E6EBC#1104396451585#com.sap.jms.server.ServerClientAdapter##com.sap.jms.server.ServerClientAdapter#Guest#18####716257115a3f11d9b73b0011110e7b20#SAPEngine_Application_Thread[impl:3]_23##0#0#Error#1#/Applications/JMS#Plain###JMS internal error at ServerClientAdapter! JMS Service is not started!#
      My questions are
      1. how do we retrieve the date and time information from the above message? It seems that this message has date and time info because LogViewer shows the date and time based on the above message.
      2. how do we change the above date format to easier one
    like "YYYY:MM:DD:hh:mm:ss"? i know that it can be configured from the Visual Admin --> Services --> Log Configurator but i don't know the exact place for the trace file.
      Thanks.

    Hi Sejoon,
    I use the standalone Logviewer to read the log files. Works great.
    "If you have an SAP Web Application Server Java 6.20 or below you may also get a standalone_logviewer.zip file at the SAP Service Marketplace at service.sap.com/download &#8594; SAP NetWeaver &#8594; Release ‘04. In this case JDK version 1.3 or higher must be installed on the system. The java version must be same on the server and the client.
    In the SAP Web AS Java 6.30 installation a folder named logviewer_standalone can be found under: <path Of J2EE installation>/<SysID>/JC<nr>/j2ee/admin/logviewer_standalone. Verify that the batch file logviewer.bat is installed in the directory logviewer-standalone.
    (source -> http://help.sap.com/saphelp_nw04/helpdata/en/e4/540c404a435509e10000000a1550b0/frameset.htm)
    Best wishes,
    Noel

  • LR2 File naming on import problem, date and time not from photo

    Hi all,
    I think I've run into a bug or inconsistency regarding the file naming in LR2. All my photos are named after the template YYYYMMDD-HHMMSS-XXXX.dng, where XXXX is the original file ID number and the rest is the capture date and time. This has worked excellently in 1.1 through 1.4.1.
    In LR2 this template, on import, doesn't use the capture time from the photo for naming but rather the _current_ time when the import happens. In the template editor you don't get to choose what time to apply, as the fields are simply called "Minute", "Second", etc.
    If I, however, use the function Library > Rename photos... on the new batch of photos after import, and apply the exact same template, they are correctly renamed to match their capture date.
    This is with LR 2.0 on Mac OS X 10.5.4 on PowerPC. Anyone else see the same thing?

    This is a reported bug.

  • What happened to the Get/Set Date and Time utilities from RT 7.1?

    I'd like to use the Get/Set Date and Time utilities that were available in 7.1, but disappeared after that. I see that the 7.1 utilites  call a dll that does not appear to be installed with LabVIEW RT 8 and later. What do I need to do to use the utilites from 7.1 that do not appear in later versions?

    In Labview 8.2 and later there are two directories for vi.lib. settime.dll is located in National instruments\Labview 8.2\Targets\NI\RT\ vi.lib
    This is the dll you want to use in order to call it use the same Vi as in 7.1 (RT set date and time.vi) and link it to the correct dll.

  • How to set the date and time format from Windows Server 2008 R2

    Hi,
    I want to control my client's date and time format as dd/mm/yyyy format and I need to do it using the windows server 2008 R2. How can I achieve this goal?
    Yoshika04

    Hi,
    In Windows Server 2008 R2, you can use Regional Options Extension in Group Policy Preferences to configure the date and
    time format. For more information, please refer to:
    Regional Options Extension
    http://technet.microsoft.com/en-us/library/cc754496.aspx
    Regards,
    Bruce

  • How to delete the date and time column from a waveform spreasheet file

    after acquiring a signal through the DAQ i am writing it in a spreadsheet. but for further post processing of the data the date and the time column are unneccessary. is there some way to format the file in labview so that those columns are removed. the DAQmx read  gives as output a 1 d array. so i could not find a way to select only the Y column

    If you are getting a 1D array from the DAQmx Read, then you don't have any date/time information to write and if you are using the Write to Spreadsheet File, there should be no way you can have the date/time information in the file. Whatever you hjave programed to put the date/time into the file, don't do it.
    p.s. You may not think you need timing information but for a lot of post-processing, it is essential to have. If it's in the file, you can always ignore when you read it and if you later find out it's necessary, it will already be there.

  • File dates and names missing from library

    I have recently had my hard drive replaced and started afresh. My old copy of iPhoto library downloaded photos into separate files by date order and showed the roll name I assigned. I could click on a little arrow on the left to show or hide the photos.
    In case this is relevant - when I got my computer back it didn't have iPhoto on it (just about everything else was there, such as iTunes, etc) so I put my disc in again and downloaded iPhoto from the disc. Now all photos go into the library and automatically sort into year files, but they are not organised into separate roll dates and I cannot hide the photos any more and just show a list of roll names.
    I tried downloading iPhoto_715.dmg, but this message appears "An eligible iPhoto application was not found in the location /Applications."
    Sorry I am not really very computer literate and just don't understand what is going on.... any help would be greatly appreciated.
    Thanks, Linda.

    Have you explored the options under the View menu?
    I tried downloading iPhoto_715.dmg, but this message appears "An eligible iPhoto application was not found in the location /Applications."
    To upgrade to a later version of iPhoto requires that you purchase the relevant iLife package.
    Regards
    TD

  • Add Date and Time Stamp to video from AVCHD folder

    New to this software and forum, so I apologize if this has been asked and answered. I am trying to insert the date and time metadata from the AVCHD folder using the .mts clips. Curently I am using VaTS to stamp the video then render the clips through Power Director. I would appreciate any help on this topic. Thank you for your time

    BenB, thanks for responding to both of my posts. The footage was shot using a Sony HDR-XR500 AKA consumer video camera. Date and time is not burned into the image when captured digitally. The only way to do it would be to run the video through a video capture device that basically just records what the video outputs. This solution really ***** so i'm looking for somthing more effective.

  • How to prevent calendar from deleting dates and times from event names?

    Calendar automatically discards date and time information from titles of new events. For example, creating a new event with the text "Staff Meeting 9 a.m. board room" leaves only "Staff Meeting". Calendar discards the "9 a.m. board room" information without asking. This feature is not helpful to me. How do I disable it?

    >
    Apple Support Communities > Mac OS & System Software > OS X Mountain Lion > Discussions

  • Material Creation Date and Time

    Hi,
    Is there any place which stores the material creation date and time. We have checked table MARA, but that only has the creation date of the material, but does not give the material creation time. We have checked table CDHDR, but that only seems to have the material change date and time.
    From where can we retrieve the material creation date and time.
    Thanks and Regards,
    John

    Actually, CDHDR and CDPOS will have the value.  The CDHDR record will be marked as a 'U" record but look at the corresponding CDPOS record for MARA and it will be marked as an 'I' record.

  • How do I change the "Set Date and Time Automatically" server

    Is there a way to change System Preferences/Date & Time/Date & Time/Set date and time automatically from "Apple Americas/U.S. (time.apple.com)" to another time server instead?

    sig wrote:
    The menu has a drop down. But if you know the address of another time server I would think you can type it in.
    Yeah, that's not really a menu, but a "combo box", which is a combination of an edit field and pop-up menu. So you can choose from existing items or just type in whatever time server you want.
    charlie

  • Set Date and Time Automatically...doesn't

    We've noticed that the setting to automatically synchronize date and time to Apple's time server doesn't work if the system preference is 'locked'
    In other words, if the user that's logged in currently, isn't an admin user, then the machine doesn't set the date and time automatically.
    As soon as you unlock the system preference by clicking the padlock at the bottom, the date and time sync as they should.
    Anyone else noticed this?

    We do want the clock correct. The issue here is that the internal clocks drift - as I understand it, this is the one of the main reasons behind using a network time server.
    With the Date and time preferences set to 'Set date and time automatically', the but with the lock at the bottom corner locked- it's as though being locked is preventing the automatic date and time settings from updating.
    But the preference is checked on, and so the clock should be 'resetting' itself as necessary.
    To give an example- say the machine has been off for a while, and unplugged. This will cause the machine not to know what the Date and Time is. When the machine starts up, the preference should kick in, and the machine should 'Update date and time' automatically.
    But it doesn't. So long as that padlock is locked, even though the preference is checked on, the machine will not alter the date and time - until the padlock is unlocked.

Maybe you are looking for

  • WebServer 6.1 SP3 SSL reverse proxy to Sun One Application Server 7

    I have an application in the appserver7 that requires SSL authentication. I have already installed a self cert in the appserver7, and the authentication works fine when I browse directly to the appserver. The appserver7 has both listener for port 80

  • Looking to create a detailed P/L in Crystal for B1

    We have an excellent P/L report created in XL Reporter. We are running SAP B1 v 8.82 but are considering a move to v 9.0. We know that XL Reporter is no longer integrated in B1 but just as an add on and I therefore wanted to see if I could use crysta

  • Web App Designer Export to Excel - Issue

    Hi Gurus, I was able to sucessfully configure export to excel feature in WAD. However the issue we are encountering is, we have a button which runs a script function, this manupulates data in some columns of the report. So when I perform export to ex

  • Bold type in InDesign

    When I place a Illustrator CS3 Ai file into InDesign CS3, the first line after it becomes bolded, but if I save the same file as a eps format and replace the AI file, the first line after the illustrator image is normal. All of the type and artwork i

  • Mouse keeps grabbing and highlight things without commanding it to

    This is very irritating. When I go to click a safari window, the mouse sometimes sticks to the page and drags it around. Or it will highlight text when ever I try and move it around. Also I wont be able to exit pages because of this. I recently downl