Date and time or connection error

plz update your software so as to access the internet and check you internet settings

Is that phone which shows it?
For manual internet settings check this link,
http://discussions.nokia.com/t5/Pool-of-Knowledge/Manual-internet-settings-for-Asha-and-other-Nokia-...
I hope it will help.
-------------------If this post helped you, click on accept as solution.------------------
-----------------------------Appreciate by clicking on white star.----------------------------

Similar Messages

Can't remotely connect to my server if I automatically set date and time

Hello.
I have configured my OS X 10.6.2 server and am able to remotely manage it.
The only ports I have opened on my router is for Mail and VPN services.
Things work perfectly because I can connect using VPN to iChat, iCal, Address Book, Server Admin, Workgroup Manager, AFP, FTP and such.
The problem is that on my laptop from home, or wherever, if its time is set to update automatically from an NTP server (I have tried with Apple's as well as my server for the NTP Servers) then I cannot connect to my server at all...
The moment I turn off the auto date and time and reconnect to the office's VPN, I am able to use Server Admin, AFP, FTP, Workgroup Manager, Screen Sharing, etc, etc, etc.
It's utterly frustrating because I have to open system preferences, disable the automatic date and time update, connect to the VPN and do stuff on the server. Then I have to disconnect from VPN and re enable the auto date and time.
Could someone explain why this is happening and any possible solutions I might be able to try?
Thanks in advance,
Felipe.

OK, after some testing things seem to be working now.
I opened the NTP port for my server (So I don't have to be on VPN to update the time)....But regardless of that, Server admin and my corporate site work fine.
Here is my problem, I don't understand why it's working now when 30 minutes ago I was having trouble connecting to my server regardless of what NTP Server I used.
The only service I can't access is Workgroup Manager, but I don't know if that is supposed to be accessible only locally (though it doesn't matter since I can screen share but I would still like to know).
Thanks in advance,
Felipe.

HT204266 cannot connect to the store...a secure connection could not be established. please check your date and time settings... I check the date and time, and the store still gives me the same error

I am having trouble connect to the app store, the error I am given is - Cannot conntect to the Store. A secure connection could not be established. Please check your Date & Time settings. - I checked my date and time settings and also shut down my Ipod touch.

See:
Can't connect to the iTunes Store
Also, besides the time and date being correct make sure the time zone is also correct. Also, if yo have iOS 5, make sure date&Time is set to Automatic.

Bi Dashboards issue works properly some times and after not display pointers data and give un expected error and throw login window

HI,
I have toff situation where we deployed bi dashboards in our site and it works some time and some times not,
and some times it keep loading and throw a login window.
works when
we restart performance point service and if not work
we re create secure store service and generated new key and create new pps service application
before that we stopped secure store and pps service using c.a in application server
we are using ssas for datasource to connect from dashboard designer
we have seperate server for ssas dbs
seperate application server running: pps service and secure store service
two web front ends: one of running secure store
1 Domain controller + central admin service running
some times after 4 -5 hours bi dashboards works , we dashboards not display data and throw un expected errors,
also when we try to connect using a dashboard designer from a seperate client machine in same domain ,we have same issue , we unable to connect to ssas datasource server, and if connect some times unable to deploy dashboards.
we tried every thin icreased server time out values in ssas server
:\Program Files\Microsoft SQL Server\MSAS10_50.MSSQLSERVER\OLAP\Config\msmdsrv.ini. in this location
and in
c:\program files\common files\microsoft shared\web server extensions\14\webclients\ppsmonitoringServer\client.config
maxStringContentLength="2147483647"
maxNameTableCharCount="2147483647"
maxBytesPerRead="2147483647"
maxArrayLength="2147483647"
maxDepth="2147483647" />
even we have same issue
is some thing happening when dashboards working some time and after some time not
is a secure store crashing or its still request pending in IIS and not authenticating to data soruce why
below are the logs
Here are the results of the log analysis :
server wfe1
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services 39 Critical A PerformancePoint service application call was aborted by the caller. This may indicate the HttpRuntime executionTimeout for the Web Application
is configured to a value smaller than the DataSourceQueryTimeout for the PerformancePoint Service Application. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C PerformancePoint Service PerformancePoint Services ef8z Critical ‏‏حدث
استثناء
أثناء عرض
عنصر ويب.
قد تساعد
معلومات التشخيص
التالية في
تحديد سبب
هذه المشكلة: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول. ‏‏رمز
خطأ "خدمات PerformancePoint"
هو 20700. 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:43:44.66 w3wp.exe (0x2128) 0x158C SharePoint Foundation Runtime ba3q Medium Redirect to error.aspx?ErrorText=Request%20timed%20out%2E failed. Exception: System.Web.HttpException: The remote host closed the connection. The error code is 0x800704CD.
at System.Web.Hosting.IIS7WorkerRequest.RaiseCommunicationError(Int32 result, Boolean throwOnDisconnect)     at System.Web.Hosting.IIS7WorkerRequest.ExplicitFlush()     at System.Web.HttpResponse.Flush(Boolean finalFlush)
at System.Web.HttpResponse.End()     at Microsoft.SharePoint.Utilities.SPUtility.Redirect(String url, SPRedirectFlags flags, HttpContext context, String queryString) 8bc44f14-acef-49bf-b1c1-2755ea7e6e24
09/01/2014 14:47:32.69 w3wp.exe (0x2128) 0x2154 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 78c107cd-0d4b-46f5-8e1a-0d9b4ebc7b29
09/01/2014 15:07:40.74 w3wp.exe (0x2128) 0x209C PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/28_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) abf0263d-7333-4e4f-9cd4-a3a4dcb700c0
09/01/2014 15:13:25.92 w3wp.exe (0x2128) 0x18DC PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/218_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) b35bf864-54f4-43fa-88a8-44cdf938bfa2
09/01/2014 15:11:10.87 w3wp.exe (0x2128) 0x1F88 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Courts/Bic/Lists/PerformancePoint Content/4_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 7cea0eb6-214f-4d7b-a6e7-97a0fe11c956
09/01/2014 15:11:40.87 w3wp.exe (0x2128) 0x2150 PerformancePoint Service PerformancePoint Services 20 Critical The user "i:Anonymous" attempted to access an item in the following location:
http://www.xxx.xxx.sa/ar-sa/Notary/Rspointer/Lists/PerformancePoint Content/162_.000 Verify that the location exists and that the user has the "Read Items" permission.
Exception details: Microsoft.PerformancePoint.Scorecards.BpmException: ‏‏لقد
انتهت
مهلة الطلب
أو تم
إجهاضها. تم
تسجيل تفاصيل
إضافية من
أجل المسؤول.     at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location, SPListItem item)
at Microsoft.PerformancePoint.Scorecards.Store.Dao.SPListItemDao.Get(ISPFcoCache cache, Guid webSiteID, RepositoryLocation location)     at Microsoft.PerformancePoint.Scorecards.Store.SPDataStore.SPItemGet(RepositoryLocation location, String
spObjectTypeId) 4154222b-6ff0-4b64-81b8-d08501a19278
server wfe 2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
09/01/2014 14:50:59.05 w3wp.exe (0x1294) 0x1D88 Web Content Management Publishing Cache 7363 Critical Object Cache: The super reader account utilized by the cache does not have sufficient permissions to SharePoint databases. To configure the account use
the following command 'stsadm -o setproperty -propertyname portalsuperreaderaccount -propertyvalue account -url webappurl'. It should be configured to be an account that has Read access to the SharePoint databases. Additional Data: Current default
super reader account: NT AUTHORITY\LOCAL SERVICE 382f711d-cdad-4c5d-be88-2e7d6f36dde2
In the Roiscan logs we get an error in regards to the English Language pack:
Review Items
============
Error:                       Product {90140000-1015-0409-1000-0000000FF1CE} - Microsoft SharePoint Foundation 2010 1033 Lang Pack: has unexpected
file state(s).
adil

chinnijagadeesh,
You suck!
Signed: The rest of the universe.
... and quit crossposting FFS... it really is quite annoying!

Time Stamp Error: Cannot display system date and time. My VI display "YYYY-MM-DD" instead of "2014-08-02".

Hi All,
I am using Labview8.5 and Windows XP OS.
My Problem is my Labview TimeStamp cannot display current system date and time.
Please see my attachment for the screentshot.
The TimeStamp or ever Format Date/Time String display "YYYY-MM-DD" instead of "2014-08-02".
I tried other computer machine and it works. There are some computer machine has this problem.
How can I resolve this issue? Please advice. Thanks.
Best Thanks,
Jessie
Attachments:
Time Stamp error.JPG ‏68 KB

Bill,
reviewing the thread Dennis linked (thanks for that) reveals that it is the same account which opened this thread here three month later.
What bothers me is the fact, that the past thread is marked "solved" even though it obviously isn't. Or the OP is trolling us.....
Nevertheless, it seems like systematic error. Connected to specific machines.
What makes the machines where the time stamp issue occurs "unique"? If there are several, is that source really "unique"?
Most obvious reasons would be:
- Language settings (possibly the infamous "dot-comma-issue")
- Time zone settings (e.g. what happens if you switch Ulaanbaatar to Perth or maybe even some US time zone?)
- Missing hotfixes for Win and LV
- Is the system running as virtual machine vs. "native"?
Not so obvious differences:
- Specific CPU type
- Motherboard/BIOS
- LV ini settings
There are tons of other possible reasons (e.g. corrupt LV installation), but these are the ones i came up with within a couple of minutes....
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!

hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!please help!

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

I get this error message, (Error code: sec_error_ocsp_future_response), but my computer has the correct date and time.

After getting this error message, I checked the date and time on my computer. That is not the problem.

You can also check the connection settings.
*Tools > Options > Advanced > Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
See "Firefox connection settings":
*https://support.mozilla.org/kb/Firefox+cannot+load+websites+but+other+programs+can

Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad

Hello everybody,
Can help anyone to resolve my problem.
I have an Thinkpad W520 (42823FG), BIOS 8BET60WW 1.4 When I disconect AC power and remove battery and connect again, I see this message on screen:
"Real Time Clock Error - Check Date and Time settings, System CMOS Checksum bad
Press Esc to continue or F1 to enter Setup"
Is this a system board problem or CMOS battery problem ?
Thank you

Hello and welcome,
It's probably (hopefully) just the CMOS battery. The easiest way to find out is to just replace that battery.
Page 85 of the Hardware Maintenance Manual:
Hardware Maintenance Manual
Here's an example of the battery. I'm not recommending (or not) this vendor:
http://www.ebay.com/itm/New-Lenovo-ThinkPad-W500-W510-W520-W530-W700-W701-W701ds-CMOS-RTC-Backup-BAT...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Equium M40X - error message at start up; 0271: Check date and time settings

Hi when I start the laptop the message appears:
ERROR
0271: Check date and time settings
WARNING
0251: System CMOS checksum bad - Default configuration used
Press <F1> to resume, <F2> to Setup
I would assume this is because my CMOS battery has had it? Is this a know issue with this laptop and how do you get at it to replace it?

Hi
It sounds as though your notebook has the wrong time in the CMOS (BIOS).
If you can get into the BIOS, check the date and time settings and make sure they are correct.
It may also be a case of the CMOS battery going out. When this happens your notebook will tend to not keep the correct time.
In such case you should connect the AC adaptor and should leave it connected for about 20-24 hours. At the end of this period the CMOS battery should be fully charged.
Good luck and best regards

Microsoft Date and Time Picker Control 6.0 (SP6) errors

One of our functioning VBA projects in Outlook 2010, running under Windows 7 Professional (64-bit), unexpectedly stopped functioning a few months ago. When running the VBA macro we started receiving the compile error message:
"Object library invalid or contains references to object definitions that could not be found"
PROBLEM FORM CONTROL: The message was extremely frustrating because it gave no detailed indication of the source of the problem. With a little research, however, we found that the
Microsoft Date and Time Picker Control 6.0 (SP6), on a userform accessed by the macro, was generating the error. A number of older articles, such as the one included below, indicated that we needed
to re-register the MSCOMCT2.OCX form control, which we did successfully (as did the original author in his question link below). Unfortunately, as the original author found, simply re-registering the form control did not resolve the problem.
UNRESOLVED QUESTIONS:
1. Does anyone know why this functioning control would unexpectedly cease to function?
2. Can anyone help us restore the functionality of the 'Microsoft Date and Time Picker Control 6.0 (SP6)'?
3. How come the form control is listed in the object library, is available in the 'Additional Controls' dialog, and can be inserted into a form, without any indication that it is broken?
SUPPORT ENGINEER RUN-AROUND: Another frustration is that a responding support engineer, in the prior article, keeps referring the author back to this forum, yet the question is apparently never answered back here in
the TechNet forum (which ironically refers us back to the original article in the other forum - a game of musical chairs!).
We suspect that the solution to this problem may be similar to resolving this issue for other similar form controls in other Office 2010 application, not just Outlook. After several years, and a myriad questions on the internet regarding
this exact subject, is there someone who can definitively resolve this issue with this control?
Thank you for any help.
LINK TO THE ORIGINAL UNANSWERED QUESTION (i.e., regarding the MSCOMCT2.OCX control and reference back to this forum):
http://answers.microsoft.com/en-us/office/forum/office_2013_release-excel/ms-date-and-time-picker-contol-60-sp-6-w-excel/9b0cc596-5e13-48bc-b03e-13dbfd1c7f9d

Hi,
Would you like to tell me your Excel version number (Go to Account>About Excel). I tested in my version :15.0.4569.1504 and the Date and Time Picker Control 6.0 still could be used.
Then,>> My PC is 64 bit. I believe my version of Office is also 64 bit.<< Office 2013 32 bit also could be installed in 64bit operation system. We could check it with Account>About Excel.
Next, as you said >>After I exited 'Design Mode,' it started working again. I tested it, along with my 'Clear Form' button multiple times. It seemed to be working fine. I closed the document and reopened it. Enabled Macros.
When I tried to use it after reopen, it doesn't work again.<<
I recommend we recreate a new blank Excel file and insert the Date and Time Picker Control 6.0 to test.
If it still does not work well, please try to reinstall and re-registry it. Follow the link:
https://social.msdn.microsoft.com/Forums/office/en-US/36f83f24-cd76-4f8e-aa7b-5f166666e7d3/excel-2013-popup-calendar
https://social.msdn.microsoft.com/Forums/en-US/91cf3127-70fe-4726-8a27-31b8964430c5/registering-mscomct2ocx-in-64-bit-windows-7?forum=sbappdev
If it works well, I suppose this issue is related to macros. I recommend you post the question to MSDN forum to debug them:
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=exceldev
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Mag Safe power cord sparks when connected or disconnected--whereupon the MacBook Pro 13'' dumps date and time, and all passwords, plus any/all unsaved information.

I purchased my MacBook Pro 13" from the Apple Store in Tucson, AZ, in mid-January. Since then, every time the Mag-Safe cord is jostled, not even disconnected, sparks fly from the power terminal on the computer, the computer shuts down, and dumps its passwords, as well as the date and time.
Any work in progress is also lost.
I work overseas, and Apple's advice was to give them my credit card number, await shipment of a new power supply and cord, and then, when I return the old power supply and cord, i'd receive a credit. That won't work, as packages from the US to my location take weeks if they arrive at all. There is no Apple Store within a reasonable distance. Or, Apple suggests, when I'm home on leave in mid-June, I should bring the computer to the Apple Store for repair--I have only days in which to do that, but I suppose I'll need to try. My concern is that I'll need to return overseas without my computer and won't be able to retrieve it for months, until my next leave.
This issue shows up elsewhere online. Is there a short in the power terminal in the computer, or on the Mag-Safe power cord, or within the computer itself? It's a known issue, thus I wonder why it hasn't been fixed.

Odd, but here's a copy of Page 1 of the links I got:
Apple Portables: Troubleshooting MagSafe adapters26 May 2011 ... If the spark comes from somewhere other than the blades of the plug, .... Apple Portables: Reducing cable strain on your MagSafe power ...
support.apple.com › Support - Cached
Apple - Support - Discussions - Magsafe sparked when plugging into ...
2 posts - 2 authors - Last post: 22 FebI plugged my magsafe adapter into my macbook pro (mid 2010 model i think ...
discussions.apple.com › ... › Power and Batteries on a MacBook Pro - Cached
Mag Safe power cord sparks when...: Apple Support Communities6 Jun 2011 ... Mag Safe power cord sparks when connected or disconnected ...
https://discussions.apple.com/message/15350172
Show more results from apple.com
Apple power brick sparks lawsuit • The Register
- 4:52am6 May 2009 ... Apple power brick sparks lawsuit ... Apple, for its part, made the MagSafe one of the featured, um, features of the MacBook Pro when it ...
www.theregister.co.uk/2009/05/06/apple_magsafe_lawsuit/ - Cached - Similar
My MagSafe sparks everytime - Philippine Mac Users Group
10 posts - 6 authors - Last post: 31 Mar 2008Guys, I seem to have a problem, well you see my MagSafe sparks everytime I plug it into a power source. I'm experiencing this problem at ...
www.philmug.ph › ... › Mobile Macs › Archives - Cached - Similar
@apple MagSafe failure sparking all over the place, not recalled ...1 Jan 2011 ... ryanol: @apple MagSafe failure sparking all over the place, not recalled? Not repairable 79 bucks later #applefail another design fail for ...
constantlycomplaining.com/.../@apple-magsafe-failure-sparking-all-over-place,-not-recalled%3F-not-repairable-79-bucks-later- - Cached
Great Northern Insurance Company sues Apple over fire-causing MagSafe2 Dec 2010 ... Over the past few years, Apple has been on the receiving end of more ... indicating that Apple's MagSafe adapters were prone to sparking and ...
www.edibleapple.com/great-northern-insurance-company-sues-apple-over-fire-causing-magsafe-adapter/ - Cached
Amazon.com: Apple MagSafe 60W Power Adapter for MacBook MA538LL/A ...Genuine Apple 60W MagSafe Power Adapter for MacBook A1184 · 3.9 out of 5 stars (11) .... like it was burning.. the covering on the cord melted off.. sparked ...
www.amazon.com › ... › Laptop Battery Chargers - Cached - Similar
Insurance company claims Apple's 'dangerous' MagSafe started fire ...
40 posts - 29 authors - Last post: 30 Nov 2010A newly filed lawsuit claims that Apple's MagSafe charger, ... Apple to heating, burning and sparking problems with its MagSafe adapters," ...
forums.appleinsider.com › Future Apple Hardware - Cached
Spark it up!!! "Apple announces Magsafe out of warranty ...
3 posts - 3 authors - Last post: 19 Aug 2008Info.: "This one concerns faulty Magsafe power adaptors that shipped with MacBook (13-inch Late 2006), MacBook (13-inch), ...
forums.macresource.com/read.php?1,546534,546743 - Cached

My new apple tv wont connet date and time and wont connect to the internet

I am pulling out my hair and soon my husbands hair!
We just got the apple tv. We are using wireless internet and have a pc.
It cannot find date and time. It keeps searching, but so far still hasn't found it. and its says it's connected
to the internet but when we try to do anything it says we are not, connection fails,, or what not~!
We have tried to reset the router and the apple tv to no sucess!
Our firewire has an exception to allow itunes.
We have tried to do it manually as well and nothing has worked!
Can someone please help!!

Amigo, also ESTOU NA MESMA situacao. Meu Apple TV chegou hoje e até o momento não consegui iniciar. já fiz restauração pelo Mac usando o iTunes e sem sucesso ainda. Alguma outra sugestão?

As I open my computer, there's a notification telling me to allow these files for a connection, which are very unsual for my mac. I allowed one and my date and time reset to january 1 of 2001. It caused my internet connection to stop working properly.

Please help me figure out what causes my internet connection and airport extreme run erratically. It occurred twice already and my only solution is to reset the date and time, and restart my macbook pro. after that, everything seems to work perfectly again. This is only problem that my macbook pro encountered for two years. Thanks!

Try what Terence Devlin posted in this topic:
Terence Devlin
Apr 14, 2015 11:21 AM
Re: Is Iphoto gone ? i want it back!
in response to Johannes666
Recommended
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

From yesterday, I have been facing the problems in my iphone and my wife iphone. The same problem, "cannot connect to itunes store". I have strong internet connection. I tried all the possible way I could like setting, general, date and time.....etc.

I have proble of "cannot connect to itunes store. After I have updated the new software ios6, the problem arised in one of my mobile. In the second mobile, I didnot updated the software.Today in the morning, the problem ariesed in that mobile as well. I cannot open the itunes, don't have access to apple store . I tried to solve the problem like going to setting, general, Date and time, automatically off, keeping one year ahead date. I tried all the possible options I could get from the googel. How do I get rid of this problem?

No - I have not tried other routers on my network.
What I meant was I could use my itouch on other users wireless networks without any issues.
I'll update the routers DNS to try using Google's 8.8.8.8 instead of my ISP.
Is the issue DNS performance using local ISP -or are there other possibel isues when using local isp DNS?

Error: 0271: Real Time Clock Error - Check Date and Time settings.

Hello all,
I have lenovo T430s laptop that is configured with Bitlocker encruptions and TPM PIN entry. I don't think that has anything to do with the error msg I am getting but here it is. Error: 0271: Real Time Clock Error - Check Date and Time settings.
Press Esc to continue or F1 to enter setup. I am unable to get into BIOS or even the login screen for Windows 7.
Any advice would be appreciated.

Thanks to everyone for the help. Just want to close this out. I had a IBM/Lenovo technician here today and he replaced the CMOS battery. Upon the change, the computer is fine being reconnected to the dock (the three times I tried it). So it has been resolved with the battery. Surprised by the incompatibility claim because I am not having issues now. Wondering if it's just a USB 2.0 vs. 3.0 thing (and Lenovo trying to sell more peripherals, of course).
Thanks!

Date and time or connection error

Similar Messages

Maybe you are looking for