Date and time reset when batery is empty

the date and time reset to initial state when the battery is empty, what should i do, thanx

Moy666 wrote:
Hi TJK, Thanx for answering,
My MBP have already a three months bought, what i should do, call to apple or to dealer?
I supposed its in warranty yet. THX
Your MBP has a one year hardware warranty on it.
As Trey suggested, it wouldn't hurt to try an SMC reset. If that doesn't work, you definitely want to contact AppleCare so you get it taken care of under warranty.

Similar Messages

  • HT3140 put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time  always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bou

    put a date 1970 june 27 . and now the whole system is out of control i cant get to internet cannot change date and time  always when i opened system preferences stays in a waiting mode but doesnt show any opcion don t know what to do and i just bought this computer

    It may well be a driver issue but considering the loading: Xorg trying to load different drivers is somewhat normal. @cafe you can see that these are autoconfigured by X above the loading in the log:
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 0
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched intel as autoconfigured driver 1
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched modesetting as autoconfigured driver 2
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched fbdev as autoconfigured driver 3
    Jul 20 19:48:24 arch gdm-Xorg-:0[216]: (==) Matched vesa as autoconfigured driver 4
    As long as one of the drivers gets loaded, which it apparently does the failing of the others is fine.
    Was there an update maybe ?

  • Does anyone encountering date and time reset to de...

    Hello to all Pureview 808 lover,
    I taken out my SIM card from my Pureview 808 during the weekend and left it turn off over the weekend.
    (with battery pack attached and it happen many time)
    On Monday, when I put back my SIM card and found the date and time of my Pureview 808 is reset back to default.
    So, I just wonder it is nature of the design or the clock battery is weaken ?
    Regards
    Anderson

    Yes, it can be fixed, but it's not an easy task.
    It depends on the iMac you own. To have an idea have a look at this guide

  • As I open my computer, there's a notification telling me to allow these files for a connection, which are very unsual for my mac. I allowed one and my date and time reset to january 1 of 2001. It caused my internet connection to stop working properly.

    Please help me figure out what causes my internet connection and airport extreme run erratically.  It occurred twice already and my only solution is to reset the date and time, and restart my macbook pro. after that, everything seems to work perfectly again. This is only problem that my macbook pro encountered for two years. Thanks!

    Try what Terence Devlin posted in this topic:
    Terence Devlin
    Apr 14, 2015 11:21 AM
    Re: Is Iphoto gone ? i want it back!
    in response to Johannes666
    Recommended
    Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
    If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
    Install the App from the App Store.
    Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

  • Date and Time lost when upgraded to PSA/SE 3.0

    I have upgraded from Photoshop Album Starter Edition 2.0 to 3.0 - my tags seem to be intact, but the dates on all of the photos reverted back to January 1, 2003 regardless when I took them. There was no warning about this happening, no recommendation to back up the files in a way to save the date info. I had spent hours posting corrected dates into many of my photos when accessed by PSA/SE 2.0 only to have all that work dissappear once the upgrade was installed. I liked being able to search for photos based on approximate date taken. I realize there is not likely any quick way to restore the dates, but if there is I'd sure like to know.

    When updating I just followed the prompts. I did not choose to cusom install anything. I let the software do all the work.
    A large number of my photos are not in the "Adobe" file and must be reconnected as well. I was hoping that once reconnected the date would return, but, sadly, I was mistaken. As I had mentioned when I first installed 2.0 I had to change the dates and times of all my pre - existing photos. They had also defaulted to January 1, 2003. Now I'm back to square one with them all.

  • Date and time reset after swith off in 5610 Xpress...

    Hi,
    I have purchased Nokia 5610 XpressMusic last week , and after updating the software from exiting V04.20 to V04.81 from Nokia site. The phone is asking for date and time settimg on every swith on. It would be great help for me ifyou advise a solution.
    debasish

    07-Jun-2008 09:26 AM
    feimeng wrote:
    you may try to reset to the factory setting and see if that works
    thanks for the suggestion, tried the same but it doesn't work

  • Hello everyone, How do I add by default a date on the actual E-mail page the date and time of when I have sent the e-mail ? Thank you very much for your suggestions. Kind regards, Christopher H. Bull, Birmingham, UK.

    Birmingham, Thursday 2. Feb. 2012
    To whom it may concern,
    I have an issue regarding the e-mail system, and I wanted to know how I can add a default that the date and time is added automatically to the E-mail page everytime I draft a new e-mail.
    Does anyone know how do create a "plug-in" to enable me to have the date and t ime posted on the e0-mail page every time i send a new e-mail ?
    If there is a plug in which is compatible with Lion iMac computers thart insert the date and time into every E-mail I send ?
    Kind  regards
    Christipoher H. Bull
    E-mail: [email protected]

    This supports macros and variables, it doesn't specifically state date and time, but if it supports variables I'd be surprised if it didn't have variables for those:
    http://email.about.com/cs/mailplugins/gr/mailtemplate.htm
    This one also supports variables and may do what you want:
    http://itunes.apple.com/gb/app/logical-mail-free/id451881152?mt=12
    You may want to look for more, I found those by googling 'mac email templates variables'.

  • HT1689 I keep getting the error: Cannot connect to ITunes Store. I recently updated the iOS on the ipad3. Have tried heaps of fixes as suggested in various threads. DNS, date and time, reset etc

    I am a fairly new apple user, just got the new ipad, as part of an evaluation program. I recently did an iOS update and now keep getting the error message:cannot connect to iTunes Store... I tried date changing - no good ... The only thing that worked was to change the DNS setting to 0.0.0.0 as described in another thread. This fix for a day and now still getting the same error message and DNS setting changes do nothing. I have tried the reset method several times to no avail. I'm beginning tho think the ipad wasn't a great idea.... Apple need to attend to this. Like many, I have already wasted too much time looking for a fix. I am part of an IT in education group that will soon be recommending a specific hardware and OS. Could result in the loss of thousands of ipad sales for apple ....
    Anyhow... All or any suggestions are welcome :)

    Also, I've just learned that I can connect to download new apps, but cannot update any apps I've downloaded in the past. How might I go about connecting my reset apple ID with its history from before it was reset? I assume that is the biggest issue.

  • Date and Time Reset

    I've got my clock set to synch automatically, but everytime I turn on my machine the date is set for Jan. 1970. I'm thinking it has something to do with the firewall on my wireless network, as I have to tell my airport to connect to the network (as opposed to it just doing it). But why reset to 1970? Why wouldn't the clock simply just keep going?

    Durden, Welcome to the discussion area!
    The iBook does NOT have a separate PRAM battery. It only has the single large battery. So the other suggestions of replacing the PRAM battery won't work for you.
    Have you tried resetting the PRAM?
    Have you tried resetting the PMU?

  • My charger switched off my iPhone and now my phone will not switch on unless connected to the charger. But, I cannot access wifi or my sim and the date and time resets. It does not connect to iTunes and freezes after five minutes

    It will not recognise sound and if I take it off the charger, it immediately switches off. I've installed iOS8 previously but nothing is working. Please help!!

    There's only one thing you can do: make an appointment with Apple genius at the Apple retail store for a out of warranty replacement.

  • Resetting the date and time after the phone has be...

    Hi,
    I keep having to reset the date and time very time I turn my phone off. I was thinking it was to do with the battery so I fully charged it, turned it off then turned it on again and it asks me for the date and time.
    I only noticed this because I've had exams and I have to turn my phone off for them.
    Could it be a dying internal battery?
    I know with computers there's a BIOS battery that controls date and time. When they start to die the date and time are inaccurate.
    I'll have to find time to take it to the 3-Mobile shop either on Sunday or sometime next week if it is an internal battery problem.
    Thanks,
    Omar
    "A Jade stone is useless before it is processed; a man is good-for-nothing until he is educated."

    Hi omar3256
    I believe that there is a very small component on the motherboard which serves this purpose, although whether battery or sort of capacitor I am not certain. The N80 especially seemed to be prone to this failure.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Script to find locks in Database with Date and time.

    Hi all,
    I used to have a script which i have lost now due to a recent laptop crash. This script used to find locks in the database.. along with the date and time since when it is locking the session.
    It was quite a comprehisive one. I think i found it on this forum only, but not able to find it now. Can someone please help me find one such comprehensive script.
    Currently I am using this script.. which is also good.. but does not have the date and time stamp on it. Is there something better.?
    SET LINESIZE 165
    SET PAGESIZE 66
    COLUMN oracle_user     FORMAT a15      HEADING 'Oracle User'
    COLUMN usercode        FORMAT a12      HEADING 'SID/Serial#'
    COLUMN os_user         FORMAT a10      HEADING 'O/S User'
    COLUMN program         FORMAT a25      HEADING 'Program'
    COLUMN mode_held       FORMAT a15      HEADING 'Mode Held'
    COLUMN mode_requested  FORMAT a15      HEADING 'Mode Requested'
    COLUMN lock_type       FORMAT a15      HEADING 'Lock Type'
    COLUMN object_name     FORMAT a30      HEADING 'Object Name'
    COLUMN lock_time_min   FORMAT 999,999  HEADING 'Lock Time (min)'
    SELECT
    s.username                                 oracle_user
    +, l.sid || '/' || s.serial# usercode+
    +, s.osuser os_user+
    +, s.program program+
    +, DECODE(l.lmode,+
    +1, NULL,+
    +2, 'Row Share',+
    +3, 'Row Exclusive',+
    +4, 'Share',+
    +5, 'Share Row Exclusive',+
    +6, 'Exclusive', 'None') mode_held+
    +, DECODE(l.request,+
    +1, NULL,+
    +2, 'Row Share',+
    +3, 'Row Exclusive',+
    +4, 'Share',+
    +5, 'Share Row Exclusive',+
    +6, 'Exclusive', 'None') mode_requested+
    +, DECODE(l.type,+
    +'MR', 'Media Recovery',+
    +'RT', 'Redo Thread',+
    +'UN', 'User Name',+
    +'TX', 'Transaction',+
    +'TM', 'DML',+
    +'UL', 'PL/SQL User Lock',+
    +'DX', 'Distributed Xaction',+
    +'CF', 'Control File',+
    +'IS', 'Instance State',+
    +'FS', 'File Set',+
    +'IR', 'Instance Recovery',+
    +'ST', 'Disk Space Transaction',+
    +'TS', 'Temp Segment',+
    +'IV', 'Library Cache Invalidation',+
    +'LS', 'Log Start or Log Switch',+
    +'RW', 'Row Wait',+
    +'SQ', 'Sequence Number',+
    +'TE', 'Extend Table',+
    +'TT', 'Temp Table',+
    l.type)                                 lock_type
    +, o.owner || '.' || o.object_name+
    +|| ' - (' || o.object_type || ')' object_name+
    +, ROUND(l.ctime/60, 2) lock_time_min+
    FROM
    v$session     s
    +, v$lock l+
    +, dba_objects o+
    +, dba_tables t+
    WHERE
    l.id1            =  o.object_id
    AND s.sid            =  l.sid
    AND o.owner          =  t.owner
    AND o.object_name    =  t.table_name
    AND o.owner          <> 'SYS'
    AND l.type           =  'TM'
    ORDER BY
    +1+
    +/+

    What Brian said is true so are your sure your query was not just reporting the start time of the current transaction from v$transaction.start_time, or the start time of the session: v$session.logon_time, or perhaps the time since the last database call (v$session.last_call_et) which for an active session would be the time the current SQL statement has been running?
    HTH -- Mark D Powell --

  • Changing date and time is wrong with time zone problem

    Okay, searched some of the forums, but didn't get the most correct answer to this:
    I just imported all my photos into Aperture from iPhoto (chose to have Aperture manage files as I don't plan on using iPhoto any longer. When I imported the files, I decided to do some organizing by date into folders. no problem.
    In some of my projects, I found some files that I imported from scans or got from others who had a film roll and processed it at a lab, and the dates from those files aren't the dates that the event took place. I went into Metadata>Adjust date and time, and changed the date (not so much the time I'm worried about), and checked the "change the masters" little box, too.
    After I close out of that box, the picture has the wrong date. I've determined this is because of the time zone support. I currently live in Japan, and I would like my photos here to show up as the date in the place they were taken. I think the date I enter, it thinks is the date I'm currently in (GMT +9), but aperture chooses to convert the date as if I was saying "hey, the picture I took happened on "date" in GMT +0:00)" which then makes it look in the metadata view as if it happened a day earlier.
    Any imported photos come in as the correct date and time and correct time zone, as far as I can see. It's just when I change the date and time it thinks I mean to have aperture convert it to GMT + 0:00. (but on a little more of a funny side... older pictures that happened in other time zones back in the states it lists the correct date and time for when the picture was taken, but "says" it's GMT +9:00) (another issue I'll deal with later maybe!)
    Hope I've described it in such a way that you can get it.

    I changed time and now my MacBook won't work

  • Date and time for credit block and release in Sales document

    Hi.
    For sales document [sales order and delivery], we need to find out the date and time :
    1. when it was blocked from credit block.
    2. when it was released from credit block.
    Is there a standard table that stores these dates and time?
    Tks.
    Rgds,
    Johnhuang05

    Try as in Environment--> Changes in sales Order.
    Or VKM2
    Hope this satisfies.
    regards,
    Ganesh Sabnis

  • Setting date and time?

    When I start my Apple TV it won't complete the setting data and time prompt when it starts up.  The wireless network is a full strength and connected.  Everytime i try to type my apple user name and password to start home sharing it says that I have one or the either inncorrect.  I've typed it a milion times in the past and to double check i logged out of itunes on the comp and logged back in, so i know i got it right.
    anyone else have this problem?

    Morning spencer.chrisj,
    Thanks for using Apple Support Communities.
    You can resolve many Wi-Fi issues by checking your network connection settings.
    For more information on this, take a look at this article:
    Apple TV (2nd and 3rd generation): Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS4546
    Look at this part of the article.
    If you are unable to access or play content while connected to a Wi-Fi network
    Best of luck,
    Mario

Maybe you are looking for

  • Org Modeler 3.0 : Hierarchies - how to turn off employee listing

    Hi, I'm in Org Modeler 3.0 In Source Org Chart -> Hierarchies -> Org Structure, there are 2 position and employee. We only want to show Org Unit and Position in the View, thus, we need to turn off Employee. However, there is no enable / disable butto

  • WebAS 6.2 Web Service

    Hi We have SAP WebAS 6.2 using SOAP/XML to communicate with IIS/.Net. The request message reaches .Net and data is returned successfully. However any data passed into .Net via XML / Web Method parameters has no value when it reaches .Net (i.e strings

  • Input controls aka Elements in Webi 4.0

    Does anyone know the trick using elements links as shown on this you tube http://www.youtube.com/watch?v=xsnZlWJTCa8 The SAP Guy had a report and when he click the element link the chart suddenly shown, I've had a hard time on how to hide the chart f

  • Setting up Time Capsule as a Time Machine backup disk

    I just bought a new Airport Extreme base station unit. I set it up the wireless network just fine, and am running 2 Macbook Pro's and 2 wireless printers on the network. The newer Macbook Pro is an early 2011 model running Mavericks. Airport Utility

  • Replaced my hard drive and can't get snow leopard back...

    I replaced my hard drive and reinstalled the operating system using my "Leopard" install CD.  But I had purchased "Snow Leopard" and now have no idea how to get "Snow Leopard" back.  Itunes won't work for some reason...everything else is fine.  I do