Date and time stamp of user status does not appear

Hi, gurus.
For a specific transaction type, the date and time stamps for certain user statuses do not appear within the transaction although these missing date/time stamps are captured in the database upon checking by our ABAP. It seems that this problem started when I added several statuses and rearranged their status numbers in the status profile last year.
I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
E.g.
Status Profile
Status No.     ---       Status Code      ---            Short Text
10            ---                    IP1L                   ---       In Process 1st Level
20            ---                    IP2L                   ---       In Process 2nd Level
Date Profile
Display Position   ---       Date Type
1                          ---       In Process 1st Level
2                          ---       In Process 2nd Level
We're going to create and assign a new status profile for the concerned transaction type. We'll make sure that this status profile is sychronized with the date profile. Hopefully, the date/time stamps will all be displayed in prospective transactions but the problem on the missing date/time stamps in historical transactions will still remain.
Pls. help us.
Thanks in advance,
Theresa

I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
No

Similar Messages

I have a 4s Iphone and want to add a date and time stamp to photos taken on the regular camera installed on the phone. Does this require a separate app?

I have a 4s iphone and want to date and time stamp photos taken with the regular camera installed on the phone. Does this require a separate app?

For such to be visible, yes. Many such apps in the app store.

How do you date and time stamp pictures and videos using a EOS Rebel T3?

I am needing to utilize date and time stamping on videos and photos in my work. The pictures and videos must display time, a date, and reference number. I have gone through the cd, owner's manuel and software manuel and I am unclear if I can perform this function.

While this is a relatively common feature on point & shoot cameras -- where the photo is thought of as a snapshot to document a memory in a person's life, among DSLR cameras it's not very common (I don't actually know of a DSLR that does this though I don't doubt that it may exist). DSLR users are usually expecting a higher quality image -- so now the image is thought of more like art and less like a snapshot and the date/time in the corner distracts from the image. Also they tend to be more advanced users who would be able to modify the image themselves so they have little need for such a feature.
The camera does record the date & time... but it's in the EXIF data (information recorded into the image file but not displayed).
SO... there are programs that will just do this. You'll need to do a search (I found several but have never tried one so I can't vouch for them). I think there are Photoshop plug-ins that do this (assuming you have Photoshop). These programs allow you to define the info you want printed (including EXIF data such as date/time) and you get to pick the location, font, size, color, etc. and ultimately the location on the image where you'd like the info displayed. They then add the info visibly onto the image for you and most support "batch" use (e.g. drop a whole folder of images on it and they'll do them all.)
Tim Campbell
5D II, 5D III, 60Da

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

How to get the most current file based on date and time stamp using SSIS?

Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vv

hi simon
i excuted this script it is giving error..
   Microsoft SQL Server Integration Services Script Task
   Write scripts using Microsoft Visual C# 2008.
   The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
    [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
    public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
        #region VSTA generated code
        enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
            Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
        #endregion
       The execution engine calls this method when the task executes.
       To access the object model, use the Dts property. Connections, variables, events,
       and logging features are available as members of the Dts property as shown in the following examples.
       To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
       To post a log entry, call Dts.Log("This is my log text", 999, null);
       To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
       To use the connections collection use something like the following:
       ConnectionManager cm = Dts.Connections.Add("OLEDB");
       cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
       Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
       To open Help, press F1.
        public void Main()
            string file = Dts.Variables["User::FolderName"].Value.ToString();
            string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
            System.IO.FileInfo finf;
            DateTime currentDate = new DateTime();
            string lastFile = string.Empty;
            foreach (string f in files)
                finf = new System.IO.FileInfo(f);
                if (finf.CreationTime >= currentDate)
                    currentDate = finf.CreationTime;
                    lastFile = f;
            Dts.Variables["User::LastFile"].Value = lastFile;
            Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv

How to provide date and time stamp to the extracted file.

I 'm downloading data from DB to Flat file using GUI_DOWLOAD. whenever it is executed it is creating with a file name.
if i rerun the program the file is overwriting with the same name.
now based on the requirement how many times i executed, that many times file should be individually created and should be added with date and time stamp.
like
if when i executed at the very first time it should saved with filename, date and time.
say "Address.txt 04/05/2007 07:55:10"
When i executed it for second time it doesn't overwrite the file.
it should create a new file.
like "Address.txt 04/05/2007 07:59:20".
Please guide me the way if possible code.
Thanks in advance.

Hi Vamsi,
               Use FM 'F4_PROGRAM' to take file from the user .
In this case user will enter the file name. u can append date & time to that file path.
Refer this code.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SY-REPID
      DYNPRO_NUMBER = SYST-DYNNR
    IMPORTING
      FILE_NAME     = P_P_FILE.
concatenate P_FILE '04/05/2007 07:59:20' into V_FILE.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                        = v_file
     filetype                        = 'ASC'
      write_field_separator           = 'X'
    TABLES
      data_tab                        = i_tab
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc = 0.
    MESSAGE i002.
ENDIF.
Reward points if helpful.
Regards,
Hemant.

Date and time stamp with Sony HDR CX7

Hi,
I am trying to figure our how to find date and time stamps for individual clips.
My workflow is as follows: I use disk utility to make a disk image (.dmg) of the memory stick and import the clips from this disk image. Everything works fine, but I am not able to find any date and time information on the imported clips.
I am slowly building a large archive of these disk images and I am wondering whether I need to add some some date an time info manually. I know that this information is recorded on the memory stick as the camera can display them.
Thomas
Config:
Sony HDR CX7
Final Cut Express 4
OS X 10.5
MacBook Pro 2.4GHz

I'd also like to ask if it's really necessary that the statuses within the status profile and date profile should maintained in the same positions.
No

Date and Time Stamp not showing up on import?

I recorded with date and time stamp on my Sony Sr-11 and when I import it in iMovie 11 it's not displayed. Please help so when I import it shows up in iMovie 11.

Playing back the tape in the camcorder that originally recorded the tape with the display output activated, doesn't mean that you actually recorded the date & time as part of the video. Check the user's manual of your camcorder to find out how to record date & time as part of the image - not just to a data track. FCP doesn't access the data code info.
-DH

Date and Time Stamp - Data Code

I am trying to import HD video from a Sony video camera to iMovie, but require date and time stamp data code to display on the video. The computer imports the video in HD without problem, but does not display the data code information. Options allow for adjusting the date and time within the video clips, which proves the code is in there somewhere, but there are no options to display the date and time stamps.
I have previously accomplished this by running the camera in real time through a Pinnacle movie box, but this is time consuming, and hinders video quality, rendering in standard definition.
Can anyone please assist?
Thanks

Date stamp data is not something read by FCP ... try iMovie,
Alternatively, check the camera's output options, it may be possible to output the data burnt-in on the s-video or some such ... if you have the requisite i/o hardware you could then digitize from that signal path

Date and time stamp question

Is there a way to drag the "date and time stamp" to my project all at once, or do I have to continue to drag it to each individual section of my project?
Thanks

Hi,
I don't find any function module, but it does'nt really hard to code this using DIV and MOD instructions :
If you've got your time in seconds :
w_day = w_time DIV 86400.
w_mod = w_time MOD 86400.
w_hour = w_mod DIV 3600.
w_mod = w_mod MOD 3600.
It doesn't seem too bad in term of performance....
Mathieu

Date and Time Stamp Removal?

Does anyone know how to digitally remove the date and time stamp on the face of the photo once the photos are loaded in Aperture, short of doing re-touch? Working in Aperture 3.

ebigglesworth,
I too am curious about Frank's mention of the date and time removal tool.
As an aside to your comment:
I'd rather just be able to tell aperture I don't want the time stamp on the image, to remove it some how digitally, if that makes sense. You'd think it could just be backed out in some fashion.
That's impossible. Your camera made it impossible. Your camera threw out some pixel data of the real picture in favor of replacing it with yellow, white, and black pixels (or whatever color your timestamp is). Basically, the original photo information is completely lost. All you can do is smudge things (in one way or another) and make the best of it. It will never look completely right unless you use a pixel editor (which Aperture is not) and painstakingly put color in, pixel-by-pixel.
nathan

How do you edit out the date and time stamp from a photo

How do you edit out the date and time stamp from a photo

You can blur it out with retouch
The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
Regards
Léonie

Can you remove a date and time stamp off a photo that has already been taken?

Can you remove a date and time stamp off a photo that has already been taken?

only with Photoshop or similar software that offer some clone/heal feature.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

Help adding current Date and Time stamp to file name

I need help with my script adding current Date and Time stamp to file name.
This is my file name = myfile.htm
I would like to save it as = myfile.htm 8/29/2007 11:41 AM
This is my script:
<script>
function doSaveAs(){
     if (document.execCommand){
          document.execCommand('SaveAs','1','myfile.htm')
     else {
          alert("Save-feature available only in Internet Exlorer 5.x.")
</script>
<form>
<input type="button" value="Click here to Save this page for your record" onClick="doSaveAs()"
</form>
Thank you

I agree, I guess I overlooked that!
I would like to save it as = myfile 8/29/2007 11:41 AM .htm
I need help with my script adding current Date and Time stamp to file name.
This is my file name = myfile.htm
I would like to save it as = myfile 8/29/2007 11:41 AM .htm
This is my script:
<script>
function doSaveAs(){
if (document.execCommand){
document.execCommand('SaveAs','1','myfile.htm')
else {
alert("Save-feature available only in Internet Exlorer 5.x.")
</script>
<form>
<input type="button" value="Click here to Save this page for your record" onClick="doSaveAs()"
</form>

DATE and TIME Stamps

I'm a relative newbie still having issues with getting date and time stamps on my printed documents.
I use Preview, Pages, Numbers and also tend to print to PDF a lot, which I am opening in Preview.
I have found an "Insert" ability in Pages but for some reason it appears to only give me the date that I inserted the Timestamp.
Can anyone help me figure out my options in Mac for putting the following on a document:
A. DATE and TIME printed
B. NAME of document with LOCATION (I assume this is software specific?!)
Thanks for any help with this.
- Jon

Yes, ...and I was hoping to find a solution since I sometimes have the same problem!
But I'm afraid there is none. For sure I didn't find any fxscript function returning Date&Time. At the moment the best solution I know is what you suggested, Ian: capture twice, once in FCE for editing and once in iMovie for reading Date and Time.
I'd be glad to write and share a plugin displaying date and time if somebody is able to tell me what fxscript function (if any) should I use...
Piero

Date and time stamp of user status does not appear

Similar Messages

Maybe you are looking for