Date and Time stamp wrong in Console / battery issue?

Since April the date stamp in Console reads 12/31/69. The date and time on the system is correct. I know these are current Console logs. My battery did go bad around this date, but I bought a new one and have had no power issues.
Also kernel task seems to be running high -- any connection?
Here's a small sampling of the console log from the point where it changed:
4/8/09 12:16:16 PM kernel AirPort: Link Down on en1
4/8/09 12:16:17 PM kernel System Sleep
12/31/69 6:00:33 PM kernel Darwin Kernel Version 9.6.0: Mon Nov 24 17:39:01 PST 2008; root:xnu-1228.9.59~1/RELEASE_PPC
12/31/69 6:00:25 PM com.apple.launchctl.System[2] fsck_hfs: Volume is journaled. No checking performed.

Sean Huck wrote:
Interesting. Can you tell me why a simple editor like iMovie can do this but Final Cut can't? I'm curious...it seems simple enough.
Yes, it seems simple. No, we can't tell you but I can tell you we've been seeing this same question here since FCPv1.
There's a feedback submission slot somewhere on this forum. It might not do any good but it should make you feel better to add your suggestion to the box.
bogiesan

Similar Messages

Date and Time stamp wrong in Console

Since March, the date stamp in Console reads 12/31/69. The date and time on the system is correct. I know these are current Console logs.
Also kernal task seems to be running high -- any connection?
Here's a small sampling of the console log from the point where it changed:
4/8/09 12:16:16 PM kernel AirPort: Link Down on en1
4/8/09 12:16:17 PM kernel System Sleep
12/31/69 6:00:33 PM kernel Darwin Kernel Version 9.6.0: Mon Nov 24 17:39:01 PST 2008; root:xnu-1228.9.59~1/RELEASE_PPC
12/31/69 6:00:25 PM com.apple.launchctl.System[2] fsck_hfs: Volume is journaled. No checking performed.

Sean Huck wrote:
Interesting. Can you tell me why a simple editor like iMovie can do this but Final Cut can't? I'm curious...it seems simple enough.
Yes, it seems simple. No, we can't tell you but I can tell you we've been seeing this same question here since FCPv1.
There's a feedback submission slot somewhere on this forum. It might not do any good but it should make you feel better to add your suggestion to the box.
bogiesan

Date and time are wrong

My date and time are wrong on boot up and won't adjust back to normal automatically. I think the internet is telling me it's a problem with either my PRAM or CMOS or NVRAM battery, the little guy that holds info while the big guy is tapped. I want to replace this. Is that possible? What is the battery actually called?

Hey MisterW,
Thanks for the question. It sounds like you wish to reset your PRAM/NVRAM, the following article should assist you:
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Thanks,
Matt M.

How to get the most current file based on date and time stamp using SSIS?

Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vv

hi simon
i excuted this script it is giving error..
   Microsoft SQL Server Integration Services Script Task
   Write scripts using Microsoft Visual C# 2008.
   The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
    [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
    public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
        #region VSTA generated code
        enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
            Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
        #endregion
       The execution engine calls this method when the task executes.
       To access the object model, use the Dts property. Connections, variables, events,
       and logging features are available as members of the Dts property as shown in the following examples.
       To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
       To post a log entry, call Dts.Log("This is my log text", 999, null);
       To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
       To use the connections collection use something like the following:
       ConnectionManager cm = Dts.Connections.Add("OLEDB");
       cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
       Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
       To open Help, press F1.
        public void Main()
            string file = Dts.Variables["User::FolderName"].Value.ToString();
            string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
            System.IO.FileInfo finf;
            DateTime currentDate = new DateTime();
            string lastFile = string.Empty;
            foreach (string f in files)
                finf = new System.IO.FileInfo(f);
                if (finf.CreationTime >= currentDate)
                    currentDate = finf.CreationTime;
                    lastFile = f;
            Dts.Variables["User::LastFile"].Value = lastFile;
            Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv

How do you edit out the date and time stamp from a photo

How do you edit out the date and time stamp from a photo

You can blur it out with retouch
The built-in "Retouch" brush in "Edit" mode should suffice, if the background is mostly uniform, and if you set the size of the brush to slightly wider than the bar width of the letters. For example, in this picture I removed the year from the date (in the lower right corner) by using the "retouch" brush and following the contours of the letters. (the screen shot is from iPhoto '11, but iPhoto 9 should give similar results).
Regards
Léonie

Can you remove a date and time stamp off a photo that has already been taken?

Can you remove a date and time stamp off a photo that has already been taken?

only with Photoshop or similar software that offer some clone/heal feature.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

How do you date and time stamp pictures and videos using a EOS Rebel T3?

I am needing to utilize date and time stamping on videos and photos in my work. The pictures and videos must display time, a date, and reference number. I have gone through the cd, owner's manuel and software manuel and I am unclear if I can perform this function.

While this is a relatively common feature on point & shoot cameras -- where the photo is thought of as a snapshot to document a memory in a person's life, among DSLR cameras it's not very common (I don't actually know of a DSLR that does this though I don't doubt that it may exist). DSLR users are usually expecting a higher quality image -- so now the image is thought of more like art and less like a snapshot and the date/time in the corner distracts from the image. Also they tend to be more advanced users who would be able to modify the image themselves so they have little need for such a feature.
The camera does record the date & time... but it's in the EXIF data (information recorded into the image file but not displayed).
SO... there are programs that will just do this. You'll need to do a search (I found several but have never tried one so I can't vouch for them). I think there are Photoshop plug-ins that do this (assuming you have Photoshop). These programs allow you to define the info you want printed (including EXIF data such as date/time) and you get to pick the location, font, size, color, etc. and ultimately the location on the image where you'd like the info displayed. They then add the info visibly onto the image for you and most support "batch" use (e.g. drop a whole folder of images on it and they'll do them all.)
Tim Campbell
5D II, 5D III, 60Da

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

Help adding current Date and Time stamp to file name

I need help with my script adding current Date and Time stamp to file name.
This is my file name = myfile.htm
I would like to save it as = myfile.htm 8/29/2007 11:41 AM
This is my script:
<script>
function doSaveAs(){
     if (document.execCommand){
          document.execCommand('SaveAs','1','myfile.htm')
     else {
          alert("Save-feature available only in Internet Exlorer 5.x.")
</script>
<form>
<input type="button" value="Click here to Save this page for your record" onClick="doSaveAs()"
</form>
Thank you

I agree, I guess I overlooked that!
I would like to save it as = myfile 8/29/2007 11:41 AM .htm
I need help with my script adding current Date and Time stamp to file name.
This is my file name = myfile.htm
I would like to save it as = myfile 8/29/2007 11:41 AM .htm
This is my script:
<script>
function doSaveAs(){
if (document.execCommand){
document.execCommand('SaveAs','1','myfile.htm')
else {
alert("Save-feature available only in Internet Exlorer 5.x.")
</script>
<form>
<input type="button" value="Click here to Save this page for your record" onClick="doSaveAs()"
</form>

DATE and TIME Stamps

I'm a relative newbie still having issues with getting date and time stamps on my printed documents.
I use Preview, Pages, Numbers and also tend to print to PDF a lot, which I am opening in Preview.
I have found an "Insert" ability in Pages but for some reason it appears to only give me the date that I inserted the Timestamp.
Can anyone help me figure out my options in Mac for putting the following on a document:
A. DATE and TIME printed
B. NAME of document with LOCATION (I assume this is software specific?!)
Thanks for any help with this.
- Jon

Yes, ...and I was hoping to find a solution since I sometimes have the same problem!
But I'm afraid there is none. For sure I didn't find any fxscript function returning Date&Time. At the moment the best solution I know is what you suggested, Ian: capture twice, once in FCE for editing and once in iMovie for reading Date and Time.
I'd be glad to write and share a plugin displaying date and time if somebody is able to tell me what fxscript function (if any) should I use...
Piero

How to provide date and time stamp to the extracted file.

I 'm downloading data from DB to Flat file using GUI_DOWLOAD. whenever it is executed it is creating with a file name.
if i rerun the program the file is overwriting with the same name.
now based on the requirement how many times i executed, that many times file should be individually created and should be added with date and time stamp.
like
if when i executed at the very first time it should saved with filename, date and time.
say "Address.txt 04/05/2007 07:55:10"
When i executed it for second time it doesn't overwrite the file.
it should create a new file.
like "Address.txt 04/05/2007 07:59:20".
Please guide me the way if possible code.
Thanks in advance.

Hi Vamsi,
               Use FM 'F4_PROGRAM' to take file from the user .
In this case user will enter the file name. u can append date & time to that file path.
Refer this code.
CALL FUNCTION 'F4_FILENAME'
    EXPORTING
      PROGRAM_NAME = SY-REPID
      DYNPRO_NUMBER = SYST-DYNNR
    IMPORTING
      FILE_NAME     = P_P_FILE.
concatenate P_FILE '04/05/2007 07:59:20' into V_FILE.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                        = v_file
     filetype                        = 'ASC'
      write_field_separator           = 'X'
    TABLES
      data_tab                        = i_tab
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF sy-subrc = 0.
    MESSAGE i002.
ENDIF.
Reward points if helpful.
Regards,
Hemant.

I have a 4s Iphone and want to add a date and time stamp to photos taken on the regular camera installed on the phone. Does this require a separate app?

I have a 4s iphone and want to date and time stamp photos taken with the regular camera installed on the phone. Does this require a separate app?

For such to be visible, yes. Many such apps in the app store.

How can i get a copy of my ipone messages with the number, date and time stamp?

How can I get a copy of my iphone messages with the number it was sent from and the date and time stamp? Needed for court purposes.

Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
http://www.ecamm.com/mac/phoneview/
http://www.wideanglesoftware.com/touchcopy/index.php
You should probably consult your attorney to see if either of these will be acceptable.

How do I find the date and time stamp on pictures?

How do I find the date and time stamp for my pictures?

The Photos app will not do this but other apps will. iPhoto has an icon that when tapped with the photo open will show the EXIF information you are looking for. iPhoto is not free but you can purchase it in the App Store.
There may be other photo apps that provide this information as well.
PhotoForge2 will show the EXIF data as well as the GPS data if it is available.

Retriving records with the date and time stamp

I need to get all the records that were update between 08:36:06 AM and 8:36:09 AM on the12/15/2009
I am using this query it is giving me the right numbers (I think) because this condition GURMAIL_CPLN_CODE = 'UGAP', I would like something more
precise using the date and time stamp with the dates
12/15/2009 08:36:06 AM
12/15/2009 08:36:07 AM
12/15/2009 08:36:08 AM
12/15/2009 08:36:09 AM
select * from GURMAIL
where
PERMAIL_CPLN_CODE = 'UGAP'
AND TO_CHAR(PERMAIL_ACTIVITY_DATE,'MM/DD/YYYYHH24:MI:SS AM') >= '12/15/2009 08:36%'Thank you

Yes, but HH24 and AM cannot be used together:
SQL> select to_date('12/15/2009 08:36:06 am', 'mm/dd/yyyy hh24:mi:ss am') from dual;
select to_date('12/15/2009 08:36:06 am', 'mm/dd/yyyy hh24:mi:ss am') from dual
ERRORE alla riga 1:
ORA-01818: 'HH24' impedisce l'uso dell'indicatore meridianoUse this:
select *
from   gurmail
where permail_cpln_code = 'UGAP'
AND    permail_activity_date between to_date('12/15/2009 08:36:06', 'mm/dd/yyyy hh24:mi:ss')
                                and to_date('12/15/2009 08:36:09', 'mm/dd/yyyy hh24:mi:ss')or this:
select *
from   gurmail
where permail_cpln_code = 'UGAP'
AND    permail_activity_date between to_date('12/15/2009 08:36:06 AM', 'mm/dd/yyyy hh:mi:ss am')
                                and to_date('12/15/2009 08:36:09 AM', 'mm/dd/yyyy hh:mi:ss am')Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2009/12/18/table-elimination-oppure-join-elimination-lottimizzatore-si-libera-della-zavorra/]
Edited by: Massimo Ruocchio on Dec 23, 2009 12:05 AM

Date and Time stamp wrong in Console / battery issue?

Similar Messages

Maybe you are looking for