Date and Time Submitted in Task Notes to show in Project Pro 2013

I wonder if anybody could assist.
I am running PWA 2013 and Project Pro 2013
When a resource updates a task on PWA and creates/updates the notes on the task, it pulls to the notes section for the task in Project Professional. This is great but…
Is there a way to pull the Date and Time Submitted next to the resources’ name in the note too?
I would appreciate any assistance.
Many Thanks :)

Hi,
I don't think this is feasible out-of-the-box. Note that the information is available in the task details when you click on the task (either in the task update page or in the approval center).
A workaround would be to train the users to start their comments by typing their initials and the date-time.
Another way more complex would be to do some custom code.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Similar Messages

Date and time at bios can not save the previous setting of hp pavilion g6-1208sx

my laptop hp pavilion g6-1208sx using windows 7, i`m using it since only one year .
date and time at bios can not update or save the previous setting.
every start i must set time and date on bios.
please help me how to saving bios time and date.

Hi,
you need to update your system bios to most recent version you can do it here:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=pt&cc=br&prodTypeId=32...
then you can update your bios settings date and hour and test again if persist you might need to replace you real time clock battery, but if your unit is in warranty i advise you to contact hp assistance so they can take an in warranty solution to you.
Any doubts or questions don´t hesitate.
Best regards

HT3180 My apple tv 3 keeps saying "setting date and time", but it's not connected to Internet, and I've restarted it for more then five minutes at a time. It also won't let me click menu to go back, but my apple tv light flashes. What do I do now?

I'm about to call, but this is my last chance. What can I do?

Aha! A bit more searching and I found the answer that just fixed it for me.
Press Menu and the Back arrow at the same time until a broken chain icon appears on the top left of the screen.
Let them go....
Press Menu and Right arrow (forward arrow) until a "fixed" or "whole" chain appears.
This enabled my apple tv to once again respond and get off the "setting time and date" screen.
Hope it works for you.

Set Date and Time - 5 Week Month Doesn't Show Last Line

Hi all,
I'm working with Labview 9.0 (32-bit) on Windows 7 with a 125% system font size. When I open the Set Time and Date dialogue box, months with five lines of days cause the window to cut the last line in half. Is there any way to fix this? I've tried messing around with picktime.vi in [LabVIEW]\resource\dialog\, but it won't change the dialogue box (and I'm told that it's not supposed to?).
I can't upgrade to a new version (my company only recently upgraded to Labview 2009, and wants to keep it for stability reasons) and I can't change the system font size because 125% is the standard. Someone suggested changing the font sizes in Environment to be smaller, but I can't do that either - I need the current font size.
Solved!
Go to Solution.

I don't think you are going to be able to.
You said you can't change the font size from 125%, that it is "the standard". Whose standard? The Normal setting for Windows is 96dpi.
I know I had problems in the past when we used an older NI program written in LabVIEW. Because we used it on a Laptop with a small screen, I wanted to have a larger Windows setting to make text readable. But it would cause problems because the layout of the front panel and location of buttons and such were based on a "normal" Windows setting. What would happen with a Large setting is that buttons would grow and start overlapping.
LabVIEW is a program where changes from the default Windows settings aren't often handled very well. If the Time/Date dialog is based on a LabVIEW VI like it appears to be, then I'm not surprised using a different setting will cause problems.

Date and Time in Sender File Adapter Target Directory

Hi there,
is there a way of using Date and Time from XI to the Target Directory naming? To use variable substitution some fields of the message had to contain that date and time information, which is not our case.
For filename you can use "add time stamp" option, but and for target directory?
Thanks and regards,
Henrique.

> <i>Do you have further information on how to perform
> this with shell commands?</i>
> >> You need to write a shell script. This script will
> add the date/time stamp into the folder in the target
> system. This shell script is executed from the File
> adapter. So once the file is written into the target
> directory, then it will rename the directory.
Hi there, Moorthy
We've tried to write that shell script that you mentioned, but now we have a few doubts on how to make it create the proper directory.
In the file adapter, my target directory is "/%var1%/%var2%/", where %var1% and %var2% are variable substitutions, referencing data which comes from the payload. Now, I need the shell script to append "/<Year>/<Month>/" in the target directory. But where to archive the script? If it stays in the root directory, than how to make it create "/<Year>/<Month>/" folders inside a directory which is variable (/%var1%/%var2%/)?
Is there a way of passing %var1% and %var2% as parameters for the shell script?
Thanks a lot,
Henrique.

Can I pick a certain date and time to restore my iphone?

In trying to update my iphone software with this latest update, our internet connectivity was screwy. When it went to sync, my iphone went black and everything on the computer screen quit. I couldn't do a thing with my iphone, it wouldn't even turn on/off so I restored. When it restored, it did not sync with the 10:30 pm time that I synced before I started the update. Instead, it synced with the 12:55 am time when the internet gave out. Which means, that I have nothing on my phone... all is lost. So I tried another restore which tried to sync it with 1:something am. OR I had the option of choosing June 2011. Is there anyway possible that I can choose a certain date and time to restore so not all is lost?

No, you can only restore form backup using the list of dates/times it gives you.

HT2473 How can I get the date and time back on the menu bar?

Several items disappeared from my menu bar for no reason known to me. I miss the date and time and want it back. Please . I have gone to System Preferences and clicked "date and Time" but it will not allow me to check anything on the page even though there is a box "Show date and time in Menu bar".
What should be my next move?

One more thing might help us
In the Finder > Date & Time Preferences > Take a Full ScreenShot of the entire display showing the "absence" of the check box (or whatever) to Show in Menu Bar
⌘ Command + ⇧ Shift > Press ' 3 ' > release all three
Use the camera tool > locate the screenshot in the Desktop (not sure whether it will say "Picture 1.png" or have a TimeDateStamp as a title.
ÇÇÇ

Date and Time Variable

Hello BI gurus,
This may be confusing so I will try my best to explain...
I am working on a report in which I need to allow the user to choose a specific Date and Time period. Now I have both Date and Time avaliable in my infoprovider. If I create a variable for both date and time seperately it will not be able to associate the date with the time (right?).
Ex. User enters date range 2/01/2008 to 2/08/2008 and
Time range 10:00pm to 3:00pm
(and i understand that time may be kept using a 24 hr clock but this still doesnt fix my issue)
this will output an error because the first time is greater than the later.
and if I choose a time that is from 3:00 to 10:00 I can't be sure that the date range and the time are both being applied correctly (since this error above).
Is there a way that we can tie the date with the time so the report will know that I am asking for 2/01/2008 at 10:00pm to 2/08/2008 at 3:00pm?
or can i make the variables dependant on each other..enter begining date, time to end Date and Time
Thanks and sorry for the long thread I wanted to be as clear as possible,
Matt

Dear Matt;
I've the same problem!!!
Any solutions?

E71 Asking Date and Time after a restart

Hi,
Yesterday when I connected my E71 with Ovi PC Suite, it prompted me, I have a phone firmware update available and unfortunately I clicked on update, the phone was updated in 15 mins but now a weired problem is happening whenever I restart the phone it asks me for the Date and Time. This was not happening a day ago.
Please if some one can help out on this issue, is there anything I am missing? Is there a way that I can move to my old firmware because that was better than this update.
Thanks in advance.
Regards...

Hi Balaji.
Use CONCATENATE functionality.
A sample code snippet for your reference :-
CONCATENATE p_path text-202 c_9 p_name c_9 lv_fcount c_9 lv_date
c_9 lv_time INTO gv_file.
Regards
Abhii

Where i will give the date and time of the session background process

Hi.
I created a program on XD01 by using Session Method.
It is executed properly and process in forground also fine.
What my problem is i want execute process of session in Back ground on that time i want give the Date and Time. I do not know where i will provide date and Time.
I want Process the BDC Session after 2 days. How it is possbile. Where i will give the date and Time?
With in these 2 days i want know the status of the Session Process. How i will check the status?
Any body will explain these things with full flow of sequence.
I do not want use the BDC Session by using RSBDCSUB. In that program there is no options for giving the Date and Time.
Thank You.
B. Krishna.

Hi,
While creating session through BDC_OPEN_GROUP function, populate HOLDDATE field to set lock on the created session till that date, say 31.12.2008 and you would like to execute your session on 1.1.2009 at 2:00 AM.
Once session is created, create a batch job for program RSBDCSUB and schedule it on 1.1.2009 at 2:00 AM (server time).
I am confident that it solves your problem.
Regards,
Prasanth

Job created date and time.

hi,
I am created the job with single step of program.
my problem is, i am passing the job DATE and TIME to select query in the program.
when ever job is execute ,what ever records in the table it is retrived,sometime job abends ,we restart the job,it is retrive the records from the last date and time.
but it is not happening now ,can you help me.
for the following query.
select aufnr from z<table> where created_date = SDLDATE
                                                created_time = SDLtime.

Hi,
perhaps, your query is not correct? It should be
SELECT ... INTO <work area>
   Please reward points if useful.
             Kind regards, Marina

Getting the date and time.

What is the best way to get the date and time?
Thanks

What is the best way to get the date and time?
ThanksI am not sure that this is the best way. But one of the ways.
<code>
java.util.Date d = new java.util.Date();
System.out.println("date is "+d.toString());
</code>

Getting the date and time from NIST server

I need to be able to get the date and time in an app and cannot trust the device's clock since the user could change it. Has anyone got an example of how to access an Internet time server such as the NIST servers from AIR for iOS?

What is the best way to get the date and time?
ThanksI am not sure that this is the best way. But one of the ways.
<code>
java.util.Date d = new java.util.Date();
System.out.println("date is "+d.toString());
</code>

How do I have photos in iPhoto display on their face the date and time?

How do I have photos in iPhoto display on their face the date and time? Displaying in the camera shows this. When I check edit the info is there. How do I have that displayed on the face of the photo when I view it in iPhoto?

How do I have photos in iPhoto display on their face
the date and time? Displaying in the camera shows
this. When I check edit the info is there. How do I
have that displayed on the face of the photo when I
view it in iPhoto?
Hi! My name is Tom from San Diego, CA. I have the exact same question as you. That is, I would like to be able to print out a photo from iphoto with the date that picture was taken displayed on the face of it. In this way, someone looking at that picture in a photo album years later would know when it was taken. Did you ever find a method to print copies of photos out of iphoto with the date displayed on the print? Thanks for your help!

Ajust the date and time on a LCD 46TL938

I intend to learn how to ajust the date and time on a LCD 46TL938 (it shows the time&date when I push I+)

That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
- Peter

Date and Time Submitted in Task Notes to show in Project Pro 2013

Similar Messages

Maybe you are looking for