Date changes after editing

As part of my PSE 8 learning process I try out various editing tools (In Editor) apply undo etc. At the end when exiting the "edited" image I select NO to save changes expecting everything about the original image (including metadata) to be untouched. Can anyone advise me:
(1) Why date created and modified is changed?
(2) Has the encoded (Jpeg) image data been changed?
I would expect to be able to trial edit without having to create a layer for this purpose.

When you invoke the Editor from the Organizer, Organizer first does the equivalent of File > Write Keyword Tag to get all of the metadata from the Organizer (specifically, keyword tags) written into the file so it is available in the Editor. This changes the metadata of the image file but not the actual image itself -- that's why you see the Date Modfied and Date Created changed (though in normal circumstances, the date taken doesn't change).
Note that other Organizer commands will change an image's metadata and thus change Date Modified/Created: Edit > Adjust Date And Time, changing star rating, changing the caption, changing the notes.

Similar Messages

Address data changed after invoice is created

Hi,
I've a problem to solve and it's related with data changed after invoice is created.
The scenario is the follow:
1º - create a complete and standard sales process - order => delivery => invoice, with the standard partner scheme and without edit the address data, for any kind of partner
2ª after the invoice is created, I change the address data on Client Master Data, for the same client that I've used on previous process
3º I'll go to the VF03 transaction and take a look at the partner data on header level. Here I can see that the changes on the Client Master Data ar updated to the invoice document wich is already created and printed when I maked the changes
I think that could be a program error because, once the documento is created, you only can change texts and accounts if this document is not yet created.
And, I can't edit this kind of data on invoice creation because it must be done at order level.
So I don't understand why it happen, but it happen on more than one client.
I'll hope that anyone can help me to solve this issue.
Kind regards,
Nuno Rodrigues

Hi Nuno,
the adresses of all Clients are stored in table adrc. If there are no changes in the order, the system takes the standard adress of the client. That is made for not having an extra adress for each order.
If you change the adress - the system will create a new adressnumber ( 999........ - see in VBPA ).
If you have different adressnumbers in your orders, you are not able th collect several orders into one delivery note - for the adressnumber ist normally a split-criteria.
Ich you will have an extra Adress for each Order, change the adress - for example by an user exit.
But if you have different adressnumbers - the delivery and the invoice will split the different orders - if you dont do something against in an user-exit.
Hans

Is there a setting to prevent modification date change after adding label or changing orientation?

is there a setting to prevent modification date change after adding label or changing orientation? I don't want to change the modification date when I haven't edited the image, but only rotated the view or rated/labeled it. Is there a setting to change to not have this happen?

You have modified it, but why worry? The date shot does not change.

The information of photo like date change after close it. How can'i correct that

the information of photo like date change after close it. How can'i correct that?

Using the Photos ➙ Batch Change ➙ Date menu option will let you change the EXIF Capture Date of the photo.
For a single photo (or to set a group of photos to the same date and time) use the Photos ➙ Adjust Date and Time ... menu option.
Happy New Year

Fee calculation if fee calculation data change after start of academic year

Hi,
If I change "Fee calculation data" on student file (piqstm) after start of academic year, fee calculation doesn't use new data even I enter a fee calculation date later than new fee calculation data valid date. If I adjust validity date of "fee calculation data" at the beginning of start date of academic year It works. But I couldn't manage changes on fee calculation data after "start date of academic year".
Is it possible to calculate fees with new "fee calculation data" if the data changes after start of academic year?
Thanks

Hi Joachim
We have not yet implemented the BAdI, we are using the standard to do the fee calculation. I guess we are gonna have to post a OSS message, cause as soon as I calculate the fee for a student and I run again the fee calculation for the same student without any changes at all, the system creates 2 new documents. I had this effect in the past but only as if you stated I changed something, like a condition or something but now is without any changes that this happens.
About the BAdI, the problem is that in our college they have more than 70 SC per campus (and the school has more than 12 campuses). The Campus Management team decided that they were going to use only 70 central SC instead of (12 x 70). By doing that we have to use a new derivation system cause the SC is attached a central school. But the reports have to be per campus. So we have plan to derivate the company code and the business area using some registration data (instead of getting it from the SC links). The same will be happening to the cost centers and profit centers.
Thank you Joachim
Sergio Artinano

Photo Icons Not Changing After Editing - Help!

Hello,
I recently upgraded to Lion and just like Snow Leopard the photo icons have white borders around them, which is fine. The problem is that even after editing the photos in both Lightroom 3 and Photoshop CS5, the icons don't change by removing the white border like they used to in Snow Leopard. If I turn off the show icon preview, the icons don't show the image of course, but still don't change after editing. I liked being able to tell which ones I had already edited and which ones I still needed to edit. Can anyone help me with this? Maybe I have some setting I need to change? I want the icon to change after editing by either showing the picture or showing the picture w/o border like it used to. Thanks!

On your Mac disable Photo Stream in the System/iCloud preference pane
and in iPhoto's Photo Share preference pane.
Reboot and reenable both respectively. That should jump start Photo Stream.
OT

Schedule line date changes after each MRP run

Dear Experts,
Clarification needed on how the system plans the MM schedule lines.
Setting: Start in the past not allowed.
3 days for processing of order
The issue is after each MRP run the system is moving the schedule line to the current date + 3 days for processing + the planned delivery time.
If the schedule line is not firmed, after each MRP run ( which happens everyday) the system is moving the schedule line and then giving an alert saying the " order has to be rescheduled to the previous day"
on the second day after the mrp run the system moves the schedule line again by one more day and gives the rescheduling date as " -2 days from today"
this change is happening every day after the planning run. - because of this there are really no backorders ( schedule line in the past ) in the system. we were not able to know if the vendor is actually delayed in this case.
can you kindly suggest what went wrong here ??
we are using strategy 10 for the planning of procured parts. Let me know if more info is needed.
Note: we are also using stock transfer process for some procured parts. there too the PR date gets changed after each MRP run. There there is no lead time in this case. the order is placed on the same day as the requirement as both plants are nearby. There the PR date is changing everyday to the current date.
your advice would be of great help
thanks
Nagendra Kumar

Hi Caetano,
thanks for your suggestion
Yes, we use firm zone for few of the vendors. there the system don't change the schedule lines.
Also for the stock transfer PR's there is no firm zone and the lead time is one day. in this case it changes everyday after the MRP run.
the stock transfer PR's leads to the creation of Schedule lines from the source plant. Since this PR gets changed everyday. the alerts coming out of MD07 gets changed and we really did not know if this order is delayed or not. In the source plant we use the firm zone to avoid moving the schedule line. But then the alerts are always not correct.
is there any setting which helps in not moving the PR everyday without using " start in the past"
thanks
Nagendra Kumar

IPhoto does not see any changes after editing a photo in Camera Raw

Hello everyone ,
I have some small problem with my iPhoto. I have set up Camer Raw in iPhoto as External Editor, so when I click on edit in IPhoto,
automatically opens my JPG in Camera Raw. After editing in Camera Raw I'm clicking on ,,Save image" then destination is ,,Save in same location" When I go back to iPhoto to the same photo, iPhoto does not show any changes I have made in Camera Raw.
What could it be or should I set something in iPhoto or in Camera Raw?
Is there a chance in order to deal with this?
I will be grateful for any assistance and
I'm waiting for advice
Dawid

Any time a RAW file is edited in any 3rd party editor from within iPhoto it MUST be saved to the Desktop and imported as a new file. There's no other way to do it. So the photos you've edited and saved are somewhere in the iPhoto Library folder system but cannot be recognized and used by iPhoto.
The following is geared for Photoshop and Photoshop Elements but might have some info relevant for you:
Using Photoshop CS3 or Photoshop Elements 9 as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's Advanced Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full size
s I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS/PSE without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in iPhoto". That will let you either edit in iPhoto using the Edit button or Control-clicking on the thumbnail and selecting "Edit in iPhoto" or in PS/PSE by Control-clicking on the thumbnail and selecting "Edit in External Editor" in the Contextual menu.
Click to view full size
This way you get the best of both worlds.
OT

Date changes in editing

When editing an image, Elements changes the dates to the current date but only on some images. Once a date is set I should like to lock it. Is this possible and what am I doing that causes the date to change. I am using Elements 11.

When you invoke the Editor from the Organizer, Organizer first does the equivalent of File > Write Keyword Tag to get all of the metadata from the Organizer (specifically, keyword tags) written into the file so it is available in the Editor. This changes the metadata of the image file but not the actual image itself -- that's why you see the Date Modfied and Date Created changed (though in normal circumstances, the date taken doesn't change).
Note that other Organizer commands will change an image's metadata and thus change Date Modified/Created: Edit > Adjust Date And Time, changing star rating, changing the caption, changing the notes.

Employee date change after pay roll run

HI sapiers,
i have an issue
one employee join on 10th of the may but in sysytem it was enterd as 13th of the may
and pay roll was processed to that employee
now can we change the employe join date now
if yes how can we do this
please help me its urrgent
thanks in advance
shjish khan

Hi Shajish,
There are three scenarios when you may need to change hiring date:
1) After payroll is run - when hiring date is before actual Hiring date.
2) After payroll is run when hiring date is after actual Hiring Date.
3) Before the payroll is run.
1) PA30 -- Copy actions info type - action type - incorrect entry -- save and come out PA 30 copy actions info type -- action type - correct entry - now correct your entries, save your date is changed.
2) PA30 - Utilities - change payroll status - delete accounted to field, save and come out - then again utilities change entry leaving date - correct the hiring date - save and come out.
3) PA30 - Utilities change entry/leaving date change your date and save.
Try this aslo
Go to PA30
Enter personnel number.
Select action infotype.
Select subtype hire mini master record.
Change to new date.
Under reasons, select new position.
Click save.
Please refer the below links:
http://help.sap.com/saphelp_470/helpdata/en/48/35c5c34abf11d18a0f0000e816ae6e/content.htm
http://help.sap.com/saphelp_470/helpdata/en/48/35c5c34abf11d18a0f0000e816ae6e/frameset.htm
http://help.sap.com/saphelp_46c/helpdata/en/1b/3e5c16470f11d295a100a0c9308b52/frameset.htm
Also we have several threads in the forum related to this.
http://scn.sap.com/thread/1185695
http://scn.sap.com/thread/1185695
http://scn.sap.com/thread/2012142
http://scn.sap.com/thread/1466306
Thanks,
Madhav

Just downloaded LR3 trial - how do I save changes after editing?

Can't see any ref to it.
Thanks, ot

clvrmnky wrote:
areohbee wrote:
I lock my photos after editing is complete ...
The beauty of non-destructive editing and snapshots (and, now, publish services) is that, just like negatives of old, your editing never has to be "complete."
When I say "complete", I dont mean "finished forever", I mean "finished for now".
I dont know how I do it, but sometimes I end up with AutoSync turned on by accident - last time it happened I hadnt even used AutoSync recently, it turned on by itself, upon restart after a crash I think. Even if my analysis is wrong and its entirely due to operator error - the result is the same: massive inadvertent edits until I detect the condition.
Also, I make another mistake sometimes (I think its me): when fast typing, I end up normalizing exposure across a whole sh-load of photos... - still havent figured out how I do that since I dont even see a shortcut for that. Sometimes I catch it right away, sometimes not until much later.
Another frequent mistake made by newbies a lot and seasoned users upon occasion: forgetting when edits will target multiple photos vs. just one.
I could go on and on... - I love that I can tweak edit settings on a whim, non-destructively, but I dont love it when changes are made inadvertently. Locking does not keep you from editing, just reminds you that it had previously been considered "finished for now" - you can proceed to edit if you wish, or revert to locked state after viewing a detalied list of changes. "Save Metadata" has now become obsolete for me, replaced by "Snapshot & Lock". I dont know about you, but my workflow is:
- After import, spend a good while editing, until done for now (at which point I snapshot & lock), then optionally at some point in the future:
- Revisit for re-editing until done for now... If thats just one change: say Exposure +.1, and it was intended, I confirm intention then move on. If I plan to make a few more changes, I unlock until I'm done with it, then relock).
To each their own, but ChangeManager has become my all-time favorite plugin. - Gives me a very warm and fuzzy feeling knowing that my photos will never be changed inadvertently - only intended changes... - I hope Adobe builds this into Lightroom proper in Lr4, but even if they dont, I'm covered. I never realized how much stress it was trying to be ultra-careful all of the time when using Lightroom, to not make inadvertent changes, until that stress was gone...

How to i get the main picture to change after editing it on the right hand side?

help ..i was emailed a document that i can edit...made the corrections on the right hand side, but cannot get the main document to change it

Email edit right side main document change it may mean something to you but I bet most of us are in the dark.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

Time EXIF change after edit

I'm with PSE 10 on MacBook pro. My probleme is each time I edit a picture in the Element editor (RAW or JPEG) the time picture was originaly taken in EXIF is changed. In the organizer it then appers an (1) hour earlier than the file opened in the editor. It's very frustating since all photos appears in wrong order in organizer. Can someone help ?

I recently switched from iPhoto to Organiser because of the annoyance factor of iPhoto creating vast numbers of thumbnails of 'faces', only to encounter the problem of unwanted Time adjustment! Perhaps I will revert to iPhoto if it doesn't get fixed soon!
I need to keep photos in the same order for viewing as JPEG CDs. Some DVD players sort and display as Slideshows by File number sequence, others by Date/Time sequence. So I try to adjust both types of data to maintain correct order.
Camera and Mac time settings do NOT result in unwanted time adjustment on import or edit.
I now have to manually re-adjust each photo's Date/time setting in Organiser after import and each editing session.
I carried out the following test using PSE 10:
Created JPEG file: in Preview>Tools>Inspector, EXIF time is 12:36 (correct).
Opened Organizer, and imported the photo.
In Organizer, time appears set back to 11:36.
In Preview, EXIF time remains at 12:36
In Organizer, selected photo, then >Fix >Full Edit.
In Organiser, time sets back further to 10:36 and in Preview, file's EXIF time sets back to 11:36.
Importing a photo into Organiser sets photo time back by one hour in Organiser!
Opening a photo file from Organiser, for Edit in the Editor, sets photo time back by one hour in Organiser, and sets back the file's EXIF time by one hour!
UPDATE:
I have now found that Organiser only resets Time in certain batches of photos.
Examing File Info in PSE Editor, Advanced, EXIF Properties, it appears that Organiser sets Time back where Exif Date Time ends with +01:00, but NOT where it ends with Z.
Both batches of files have Meta Data Date ending with +01:00.
Message was edited by: grandadpete3

Best way to back out data changes after a release

Hi,
I'm trying to decide on the best way to backup some production data in case a release fails and we need to roll back the changes. This would be for data updates only, not schema changes. We have extremely limited access to production, and another team handles all the RMAN backups. The people who actually implement our releases are also pretty prone to mistakes.
I have thought of two options. The tables we want to backup are about 9 MB total in size (it's about 10 codes tables).
1. Create a bu table for each of the tables before the release. So for JENNSTABLE, we would create a JENNSTABLE_BU using CTAS. If we need to revert, we can drop JENNSTABLE and rename the JENNSTABLE_BU accordingly. The bu table would remain in production until the next release, where it would be reused again. This would be really easy to script and therefore avoid any mistakes by the production support team who implements our instructions. We would also be able to determine what values changed by querying the bu table at any time (currently old values are not retained anywhere).
2. Use datapump to export the 10 tables, then truncate the tables and import the previously created files to restore the original data. I'm hesitant to use this method because I've never used datapump before, and as we don't have access to the servers, creating file system files makes me a little nervous. If I used a bu table, I can logon to the database and at least tell if it exists.
Are there any preferred methods for doing this (besides restoring a table w/ RMAN)? Is there a best practice? Any advice is appreciated!
-Jenn
Oracle 10g
UNIX Solaris

Hi sb92075,
That's a good suggestion. FLASHBACK_ON is set to no on my database, but if I understand correctly, I can still do a FLASHBACK TABLE and the undo data would be used. Is that correct?
My concerns w/ using Flashback are ..
1) The client might decide to rollback the changes a week after they've been executed. The undo data might not be available and the flashback would fail.
2) If any of the following processes are part of the release, the flashback wouldn't work:
"The following DDL operations change the structure of a table, so that you cannot subsequently use the TO SCN or TO TIMESTAMP clause to flash the table back to a time preceding the operation: upgrading, moving, or truncating a table; adding a constraint to a table, adding a table to a cluster; modifying or dropping a column; adding, dropping, merging, splitting, coalescing, or truncating a partition or subpartition (with the exception of adding a range partition)."
Can you address those two issues? Thanks so much for taking the time to respond! This forum has helped me immensely with my work.
-Jenn

Baseline date change after the creation of invoice list

When I create invoice document, the invoice date (vbrk-fkdat) is the end of the month and the invoice list date (VBRK-FKDAT_RL) is the next business day after the invoice date, the baseline date of the accounting document (bseg-zfbdt) is the document creation date and this is what I wanted.
However, when I start to create the invoice list, the baseline date on the accounting document (field bseg-ZFBDT) is changed to the invoice list date. Does anyone know why and how to fix and where to look in the configuration to see how invoice list date (vbrk-fkdat_rl) is populated? It seems to me that the baseline date default back to the invoice list date when invoice list document is created. Thanks for your help. I also posted this question in the ERP Financial thread.

Hi Valerie,
do you recall the User Exit?
Thanks

Date changes after editing

Similar Messages

Maybe you are looking for