Date changes for variant in se38

Hi Experts,
Can you please share me the reasons how release dates changes in variant while downloading CSV file for PO in se38.
In our system automatically release ddates has changed to past in the varainat in se38.
Will tehre be any effect while downloading CSV files for PO? What might be reasons for dates changes? And how can system pick the dates abnormally??
Thanks,
Shruthi.

Hi,
Appreciate for the response.
Actually our system is POs which cretaed in SAP picks up automatically through programs running on daily basis. There is a middleware connector which picks this POs in CSV format and send to the vendor.
If some times program fails to pick them, we will manually download CSV file and transmit manually through middle ware connector. We use se38 for this purpose.
We do this activity regularly. But now we are facing a problem like release dates got updated in this variant which are in Past ( 6months) back dates got updated and the POs relased on that dates transfreed to vendor. (There is a check with release date in programming).
Now my questions are:
1) How those past dates got updated?
2) Is there any relation ship with manually downloading to update these dates?
Please clarify.
Thanks
Swetha.

Similar Messages

Track Master Data Changes for Multiple countries

Hi experts,
I am in a Global HR Implementation & Rollout Project. We are creating Outbound Interfaces for 3 countries to export pay, time and general data to the 3rd party systems in those local countries. (Payroll is outsourced there).
As well as sending New Joiners data every month, we need to send Changers data also to all those 3rd partys every month before the Payroll runs.
I know 2 solution for this :
a). Using Change Documents - Tcode : SCDO ..etc
b). Using the report RPUAUD00.
c). Using RBDMIDOC.
Query :
1). Are these the only solutions ?
2). Whats the best solution for doing this for a Global Rollout project ? I need to track master data change for different countries for different set of Infotypes and fields. I need to send those Changers data as well as the New Joiners data through the Outbound Interface to all the local countries.
This year we are doing for 3 countires, next year for 9 more countries, etc. Whats the best solution keeping this in mind ?
Restrictions :
1). Our Client HRs dont want us to disturb the report RPUAUD00 as they use that regularlly and want the flexibility to configure the configs themselves.
2). If I must need to create and activate Change Documents for ALL individual fields, is there an easy way of doing this ?
3). I need to send this Changers data from SAP to Legacy system, so dont know if RBDMIDOC will be a good solution for this. Any comments ?
Just want the best possible and feasible solution for this issue.
I will be please to allot point to anyone who gives a good solution.
Moreover will be Thankfull also !!
Cheers.

Please try with transaction code "PC00_M02_LINF0"
Cheers
Suresh.KK

Labview How to specify 1d array of clusters as data types for variant to data

Hi, I'm new to labview. Can anyone tell me how to specify 1d array of clusters as data types for variant to data?

First of all, you should be sure that there is such a data type within the variant; otherwise, you will run into errors.
I recommend you to create the cluster and create a type definition from it. Then drop an array shell from the array palette and drop the cluster type into that array.
Connect that constant to the data type input of the Variant To Data function.
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

HR ABAP : Track Master Data changes for multiple countries

Hi experts,
I am in a Global HR Implementation & Rollout Project. We are creating Outbound Interfaces for 3 countries to export pay, time and general data to the 3rd party systems in those local countries. (Payroll is outsourced there).
As well as sending New Joiners data every month, we need to send Changers data also to all those 3rd partys every month before the Payroll runs.
I know 2 solution for this :
a). Using Change Documents - Tcode : SCDO ..etc
b). Using the report RPUAUD00.
c). Using RBDMIDOC.
Query :
1). Are these the only solutions ?
2). Whats the best solution for doing this for a Global Rollout project ? I need to track master data change for different countries for different set of Infotypes and fields. I need to send those Changers data as well as the New Joiners data through the Outbound Interface to all the local countries.
This year we are doing for 3 countires, next year for 9 more countries, etc. Whats the best solution keeping this in mind ?
Restrictions :
1). Our Client HRs dont want us to disturb the report RPUAUD00 as they use that regularlly and want the flexibility to configure the configs themselves.
2). If I must need to create and activate Change Documents for ALL individual fields, is there an easy way of doing this ?
3). I need to send this Changers data from SAP to Legacy system, so dont know if RBDMIDOC will be a good solution for this. Any comments ?
Just want the best possible and feasible solution for this issue.
I will be please to allot point to anyone who gives a good solution.
Moreover will be Thankfull also !!
Cheers.

I have used PU12 for same purpose at a similar client. It will fulfill all your needs I guess, but the learning curve is big. Search for "Interface Toolbox" or "PU12". Basically your search will end-up in these two links:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYSOME_INTERFACE.pdf
HR Interface Toolbox - PU12

How do you make the date change for every entry when inserting.

Hello, I am making a daily vehicle inspection report for my truck and I would like to make a 7 day calendar but I would like to insert the date ie Monday Feb 22, 2010, Tuesday Feb 23, 2010 etc...and have it change for each day of the week. is there a way to do this? Also can you put an outline or a box around the 6 lines of text that you input.
Thank you
Ottoman

Jerrold Green1 wrote:
Ottoman,
As Peter says, you can use a Table for this. You do not, however, need to enter two dates to fill with a series of dates. Dates are an exception to the general Fill rule. Just enter one, and fill down to get successive dates.
Other exception available:
a single cell is sufficient for every entries ending with a number :
president1
thief2
king3
behave this way.
Durations behave like numbers : two cells are required.
Yvan KOENIG (VALLAURIS, France) samedi 27 février 2010 18:20:29

If someone changes the date on an iCal event should the date change for the invitees if they accept the change?

My wife's calendar schedule is pretty hectic and prone to date changes. If I accept the initial invitation it appears correctly in my calendar and syncs correctly to all my devices but I find that if she changes a date and I accept the new change, the event stays the same in my calendar.
Is this correct or am I having problems?
Cheers

Thanks - I did get the event to go back to 2008, but should the individual clips move to the correct spot in the timeline also? I need to go back and play with it a little more - I would guess you might have to look at the length of clips on either side of where you want the new clip placed for it to work correctly.
So, I guess my 2nd question is if you can get the new clips that were added at the end of the event to move into the correct position within the event.

The date changed for unlocking my iPhone from July to October

For some change reason the date changed on which I was able to unlock my phone. I was July but suddenly it changed to Oct 2012. I have a German provider (T-Mobile) but they are not able to help me. Does anyone know waht happend. I found more people with the same question in other forums but no answers.

Don't know what to tell you. Yours is the first post of its kind regarding a "delay" in authorizing an official unlock I've seen, and quite frankly I can't imagine any reason for such on Apple's end. All that Apple does is add your phone's IMEI number to a data base of officially unlocked iPhones. Something seems fishy to me regarding what your carrier told you. At any rate, there is no one from Apple here, thus nothing anyone here can do to help you. You could always call AppleCare & verify the veracity of what you were told, and if not true confront your carrier.
Good luck.

Retro master data change for previous cost center

HI All,
Could any one please reply on how I can unblock 'blocked cost center' to make retro changes for Master data.
Thank you in advance.
Abhay

Hi Abhay,
1. Unblock the cost center for the period to apply the Master data changes. Unblock it via transaction KS02.
2. Once the legacy cost center is unblocked, immediately proceed with master data updates.
3. Once master data is updated, proceed with restoring the blocked status of the cost center that was used (Unblock).
Thanks,
Dhiraj

Creating Data Source for Variant Configuratior characteristics.

I'm trying to create a data source for material classification that is using the Variant Configurator. In transaction CTBW I'm using the following:
- Basis datasource = 0MATERIAL_ATTR
- Client 150
- Class Type 300 for Variants.
- Obj Table = MARA
- Data Source Type = ATTR
I then get the following error messeage:
"Object type is not a sheet type in the class type".
Dose any one understand this message or how I should create the datasource for this classification?
Thanks for your help.
Denny

Thank you very much for your response. Can you tell me how you found this explanation of this error? I tried searching OSS and did not find anything.
Ok, so since 0material can have multiple values I cannot use CTBW to extract the values.
My company is using the variant configurator on a material number 'EXTND_WARRANTY' in R/3. This material is defined as a configurable material. The Class is 'ZEW_SOFTWARE' with the following characteristics:
-Material Number
-License Key
-Maintenance Length
-Coterminous Enddate MM/DD/YYYY
In BW reporting we need to show the material 'EXTND_WARRANTY' with the value of the characteristic Material Number.
Can you tell me how I can accomplish this?
Thank you.
Denny

Log data changes for only a table

Hi,
We know that to read log modification from a table we need to set the client on system parameter rec/client and also set flag in settings table from transaction SE13. But we do not want to set log for all tables in system only for one for table T001B.
Any suggestion?

Another option would be to only make changes to T001B and accept the defaults... no other logs will be written
You might also want to take a look into the "recclient" parameter (without "/") in the transport profile.
Anyway, I think you are concerned about a performance urban legend? Application data generally has it's own logs (CDHDR, etc) which are not related to this, and you mostly cannot turn it off anyway.
Cheers,
Julius

Validity Date change for Reimbursement types

Hello Experts,
We have a requirement to change the Validity period for Medical Reimbursement(SLTA) in table V_T7INAA from Calandar year to Financial year(Salary year for Payscale groupings for allowances). Shall we proceed by delimitting the existing validity period (As Calandar year) till 31.03.2009, since we need the new validity period from 01.04.2009(As financial year). Also which are the the things we should take care while making these changes?
Many Thanks in advance
Ravishanker

HI all
My prolem solved.
Thank u for all
Lakshmi Kaja

Updated: Roll out date changes for London

FYI Londoners. A newly updated roll out map for London has been published today on the main BT Infinity Website.
Happy/Sad?? Comments...

Beulah Hill has moved from March 31st and June 30th to now September 30th on the map. The phone line checker states "not going to happen for 6 months".
Anyone else noticing anything odd?

How can I tell the time and date changed for my pr...

Just had a problem with my bestfriend whom I believe hacked into my profile. Now I want to find out how I can have access to history of when I have posted a different display picture and the alike. thanks

Sheryl Kingstone wrote:
but does it show on the final burned project?..
it does..
.. but how does Mrs AppleMan handle all that kissing.. ?
greetings to T & K..

Pre-fill the OLAP cache for a query on Data change event of infoprovider

Hi Gurus,
I have to pre-fill the OLAP cache for a query,which has bad performance.
I read a doc 'Periodic Jobs and Tasks in SAP BW'
which suggested sum steps to do this
i hav created the setting for Bex broadcasting for scheduling job Execution with data change in info provider
thereafter doc says "an event has to be raised in the process chain which loads the data to this InfoProvider.When the process chain executes the process u201CTrigger Event Data Change (for Broadcaster)u201D, an event is raised to inform the Broadcaster that the query can be filled in the OLAP cache."
how can this b done please provide with sum proper steps
Answers are always appreciated.
Thanks.

Hi
U need to create a process chain or use the existing process chain which you are using to load your current solution, just add event change process type in the process chian and inside it add the info provider which are going to be affected.
Once you are done with this go to the broadcaster and create new setting for that query...you will see the option for event data chainge in infoprovider just choose that and create the settings.
hope it helps

Vendormaster data changes not updated in MM scheduling agreement

Hi,
Can anbody tell me how to update the vendor master data changes for the exsting purchasing documents.

My dear friend ,
Solution 1:
In SAP ,it is not possible. Please shortclose the p.o.and create a new P.o to reflect the payment terms,
Solution 2:
Normally in all industries they will send a official letter stating the terms of payment has been amended. You will get the payment as agreed. While posting the MIRO change the payment terms and pay the vendor.
I think this the solution you have to choose any one no other go
G.Ganesh Kumar

Date changes for variant in se38

Similar Messages

Maybe you are looking for