Date class of jdk 1.5.0 returns wrong Date.

Hi All,
i have a problem in my code with Date class in jdk 1.5.0.
The code given below gives different output on two OS ( {color:#0000ff}both are placed at same place{color} )
GregorianCalendar cal = new GregorianCalendar();
Date today = cal.getTime();
System.out.println("today: " + today);
System.out.println("Hi !! current timeZone is :" +TimeZone.getDefault().getID());
output ( on solaris 5.8) :--
{color:#ff0000}today: Thu Sep 27 07:02:39 EDT 2007
Hi !! current timeZone is :US/Eastern{color}
output (on windows) :--
today: Thu Sep 27 11:04:05 IST 2007
Hi !! current timeZone is :Asia/Calcutta
please, tell me, how this can be fixed?
Thanks in Advance!

I'm not sure I understand right. So this may be all wrong .
But if you send actions between the two computers pick one of them and always refer to it's date.
All you'd have to do is to init a calendar with the picked OS time, and time zone with time zone, and keep those two alive all the time. This way you'd have the same settings on both java applications (but not OSes).
If you send actions I suppose you could just as well send the time settings.
HTH

Similar Messages

JDKs in weblogic server return wrong time zone

Hi , i am running weblogic server 8.1.4, 8.1.6 and 10 on my windows vista
all of the JDK bundled (both Sun's and JRockit) return GMT instead of my local time zone when i call Timezone.getDefault()
I am quite sure the operating system has set to correct time zone because my self installed JDK (downloaded from sun) works properly (return correct local time zone)
is that i have missed anything?
please help.

I am noticing the same problem with iCal events imported from Orbitz. The thing is that the more I look into it the more I think this is meant as a feature, not a bug. Go into iCal preferences > Advanced and uncheck "Turn on time zone support". Import the event again and this time both the graphic view and the Get Info view will display the same information.
It appears that this setting is meant to be useful if you travel to different time zones a lot. Basically, with it you get a time zone dropdown menu in iCal. So when you are in a different time zone you can select it from the dropdown and it will show what time your events occur in your new local time. Just keep in mind that when you create a new event it will be created based on the time zone you have selected. So if you are in California and have selected that time zone but you are adding an entry for a meeting you have when you are back in New York make sure that you select the correct time zone when creating that meeting because by default it will be created in California time and when you return to New York and switch your calendar back it will show the event at the wrong time.
Frank

Report returns wrong data when run on server

Hi,
I'm runing CRS XI R2 on Windows Server 2003 SP2. When I refresh a report in the Crystal Reports XI Designer, I'm getting correct data. But when I schedule the report to run on the server it returns wrong data. The data is different from what I see when I refresh it from the designer. In the report I have running totals set up to count customers that meet a certain criteria. The report is very large. It take almost 2 hours to refresh.
I was wondering what is causing the difference in running total data between refreshing it on the designer and running it on the server. Is it returning wrong data b/c of it not reading all the records? Should I be making any changes to the server settings? I saw that under pageserver, there are options for setting the 'Minutes Before an Idle Report Job is Closed' and 'Database Records To Read When Previewing Or Refreshing a Report". Do either of those have anything to do with the report returning incorrect data when being scheduled to run on the server?
Thanks,
Kim

Hi Xuandao,
You would need to Use Cell Binding and Trigger concept to accomplish this.
Its simple, however, you would have to work on a trial and error basis to understand this concept as implementing the same is subject to your dashboard and WEBI Design.
Open you LiveOffice.
Insert your WEBI, Now, go to Object Properties of your WEBI, select the second tab that says Prompt, Here, it lists the prompts that you have for your WEBI. This would also enlist your BEx variables as well. Select this BEx variable and click on the button that says Prompt at the bottom of this window. Here, select choose Excel Data Range and click on the cell select button on the right (small button that lets you choose what cell you want to bind this prompt to), Now select a free cell that would not be even populated later on when you run the dashboard say A1 (remember the value that you select). Click on OK and again OK. The WEBI Refreshes and you can see all the prompt values at the cell A1. These are all the possible values stored for your BEx prompt variables (these values are fetched from BW system dynamically).
Now, save this LiveOffice, Go to you dashboard. Connect your dashboard to your Live office. Go to Data-> connections-> Now, select the WEBI and in the right hand pane go to Usage tab, here, Click on Trigger cell button on the right hand side and select A1 in you LiveOffice.
It should work fine.
Let me know.
Rgds,
Sreekul Nair

JSObject returns wrong date. How can I extract correct date from digital signature?

I'm trying to extract name and date from digital signatures by using JSObject in Excel VBA, but JSObject returns wrong date. Year, month, hour and minute are correct, but only day is incorrect.
Here is my code. I'm using Acrobat 8.1.3.
Please tell me what's wrong with this code and how I can extract correct date from digital signatures.
Public Sub sbTest()
Dim oApp As Acrobat.acroApp
Dim oPDDoc As Acrobat.AcroPDDoc
Dim jso As Object
Dim f As Object
Dim sig As Object
Dim strFileName As String
Set oApp = CreateObject("AcroExch.App")
Set oPDDoc = CreateObject("AcroExch.PDDoc")
strFileName = "C:\Test.pdf"
If (oPDDoc.Open(strFileName)) Then
Set jso = oPDDoc.GetJSObject
Set f = jso.getField("Signature1.0")
Set sig = f.signatureInfo()
Debug.Print sig.Name
Debug.Print sig.Date
End If
Call oPDDoc.Close
Call oApp.Exit
End Sub

Hi
You can use TDMS file format to save the data. I have attached a reference Vi.
On button click you can log the data or remove the case structure and continuous log the complete acquisition data.
Thanks and Regards
Himanshu Goyal
Thanks and Regards
Himanshu Goyal | LabVIEW Engineer- Power System Automation
Values that steer us ahead: Passion | Innovation | Ambition | Diligence | Teamwork
It Only gets BETTER!!!
Attachments:
Data Save in File.vi ‏35 KB

Function sometimes return wrong data

Hi all.
I have a very strange problem with a function. Situation is this: I have an application that handles processes. Each process have a number of steps that is arranged in a matrix like layout. User clicks a step to start/execute it.
Now in a list of current processes i want to have an indication of how "far" a process has reached so i created a function for that and included that in my processlist fetch.
gchs_user_process_steps is the table where the user data for the process step is
gchs_process_steps is the definition table of what steps a process has
gchs_steps is the definition table of all steps
The below function is supposed to return latest step user clicked in the display matrix. tier is used to store the column number and sortorder is the row number of any step user clicked.
CREATE OR REPLACE FUNCTION FN_REACHEDSTEP(p_user_process_id NUMBER)
RETURN VARCHAR IS
  ret VARCHAR(30);
  ret_id INTEGER;
  ret_num INTEGER;
BEGIN
   ret := '';
   ret_id := 0;
   ret_num := 0;
   BEGIN
SELECT substr(step_name,1,30),step_id,reached INTO ret,ret_id,ret_num
FROM (
SELECT a.*, rownum rnum
FROM (
    SELECT s.name AS step_name, ps.id AS step_id, max((ps.tier*1000)+ps.sortorder) AS reached
    FROM gchs_user_process_steps ups, gchs_process_steps ps, gchs_steps s
    WHERE ups.gchs_process_step_id=ps.id AND
       ps.gchs_step_id=s.id AND
       ups.gchs_user_process_id=p_user_process_id
    GROUP BY s.name,ps.id
    ORDER BY 3 DESC) a
WHERE rownum <= 1 )
WHERE rnum >= 1;
   EXCEPTION
     WHEN OTHERS THEN
        ret:='';
   END;
      RETURN ret;
  EXCEPTION
WHEN OTHERS THEN
       ret := '';
   RETURN ret;
END FN_REACHEDSTEP;
Now the problem is that the function sometimes return wrong value. The name of the step that is returned is not the one i get if i run the SQL by itself.
So doing a
SELECT substr(step_name,1,30),step_id,reached INTO ret,ret_id,ret_num
FROM (
SELECT a.*, rownum rnum
FROM (
    SELECT s.name AS step_name, ps.id AS step_id, max((ps.tier*1000)+ps.sortorder) AS reached
    FROM gchs_user_process_steps ups, gchs_process_steps ps, gchs_steps s
    WHERE ups.gchs_process_step_id=ps.id AND
       ps.gchs_step_id=s.id AND
       ups.gchs_user_process_id=21680
    GROUP BY s.name,ps.id
    ORDER BY 3 DESC) a
WHERE rownum <= 1 )
WHERE rnum >= 1;
and a
select fn_ReachedStep(21680) from dual;
will sometimes return different values.
So is the function fundamentally wrong or is there any cache or something that i've missed that could hold "old" function outputs or am i missing something else.
Thankful for any clues.
I'm using Oracle 10.2.0.1.0
Best regards
/Tomas
Edit: Here's some data that the system uses.
gchs_steps
ID           NAME
10000     Step 1
10020     Step 2
10021     Step 3
10022     Step 4
10023     Step 5
10060     Step 6
10140     Step 7
gchs_process_steps
ID          GCHS_STEP_ID      TIER     SORTORDER
10000     10000               0          1
10001     10020               1          1
10002     10021               1          2
10003     10022               2          1
10020     10023               3          5
10060     10060                3          4
10080     10140               3          2
10040     10040               3          3
10100     10160               4          3
10160     10220               4          2
11640     11640               3          1
11660     11660               0          6
11661     11661               0          7
11600     11600               0          4
11620     11620               4          1
gchs_user_process_steps
ID          GCHS_USER_PROCESS_ID     GCHS_PROCESS_STEP_ID
35541     21680                         10002
38441     21680                         10020
38440     21680                         10000
52062     21680                         10060
Relations beween table is
gchs_user_process_steps.gchs_process_step_id=gchs_process_steps.id
and
gchs_process_steps.gchs_step_id=gchs_steps.id
So doing the SQL alone will always return
SUBSTR(..)     STEP_ID REACHED
Step 5      10020 3005
but executing the function sometimes returns
FN_REACHEDSTEP(21680)
Step 6
Also removing the rownum limits return and doing a
SELECT s.name AS step_name, ps.id AS step_id, max((ps.tier*1000)+ps.sortorder) AS reached
FROM gchs_user_process_steps ups, gchs_process_steps ps, gchs_steps s
WHERE ups.gchs_process_step_id=ps.id AND
ps.gchs_step_id=s.id AND
ups.gchs_user_process_id=21680
GROUP BY s.name,ps.id,ps.tier, ps.sortorder
ORDER BY 3 DESC
give this result
STEP_NAME     STEP_ID     REACHED
Step 5          10020     3005
Step 6          10060     3004
Step 3          10002     1002
Step 1          10000     1
Edited by: user4935832 on 2008-sep-19 01:38

ORDER BY 3 DESC) a
WHERE rownum <= 1 )
WHERE rnum >= 1;Just some thoughts.
1. You could replace "ORDER BY 3" by "ORDER BY reached"
2. the rownum <=1 and rnum>=1 will return only one row... I don't understand the second one.
Lastly, the difference might come from a duplicate value return by your MAX() function.
If there is two rows (or more) with same MAX, Oracle might return one row arbitrary.
To get the same row, you have to use some aggregation function like MAX() KEEP (DENSE_RANK LAST...).
Here a try for your query, obviously not tested :
SELECT max(substr(step_name,1,30)) keep (dense_rank last order by reached) as step_name,
       max(step_id) keep (dense_rank last order by reached,step_name) as step_id,
       max(reached) as reached
FROM   (SELECT s.name AS step_name,
               ps.id AS step_id,
               max((ps.tier*1000)+ps.sortorder) AS reached
        FROM   gchs_user_process_steps ups,
               gchs_process_steps ps,
               gchs_steps s
       WHERE   ups.gchs_process_step_id=ps.id
       AND     ps.gchs_step_id=s.id
       AND     ups.gchs_user_process_id=21680
       GROUP BY s.name,ps.id) a;Nicolas.

Please Help Urgent:Fast Search returning wrong result sets

Hi All,
We are facing below issue with fast search.
Currently in My project when we are searching for a phrase it is returning wrong result sets.
For example if we search for “Endura”, It is returning documents related to
Endura as well as Centura.
But the expected results are only Endura documents.
When we look in to the documents we didn’t find the search term (“Endura” ) either inside document content or in its meta data.
In order to resolve the issue we tried the below steps
1-
We manually edited and saved the document, to ensure the appropriate Guid association to metadata.
2-
Index reset
3-
Full crawl
But no luck so far.
Please help.Thanks in advance.
Regards
Subrat

Subrat,
This may be related to spellchecking or may be synonym. Spellcheck is based on indexed terms.
The best test would be to run the queries from qrserver (13280) and then look at the spellcheck query transformations. If spellchecking is not doing it, then you must have a synonym setup .Check your keyword/synonyms from the SharePoint side.

Trouble with the header content of php script - return wrong character: ?�?

Hello everybody!
I have one problem with reading of content of php's return text value.
Ok in php script was programmed something like this:
===========================================
     $new1 = ereg_replace(".*OUTPUT url=\"(.{40,70})\" ?/>.*", "\\1",$XMLResponse);
     $size = strlen($new1);
     header("Content-Type: text/plain");
     header("Content-Length: " .$size);
     echo $new1;
==========================================
$new1 includes url address to picture.
Ok, in my java applet I'm using the method readLine() of DataInputStream Class, where I'm reading the return text value of the mentioned php script. The code is here:
==========================================
          try {
               dis = new DataInputStream(url.openStream());
               str = dis.readLine();
          } catch (IOException e2) {
==========================================
but response is a text plus this kind of characters in beginning : ?�?
What the trouble there? Thank you
Jan Zitniak :)

Hello,
thank you for your idea, but I resolved problem with this code:
          URL urlReal = null;
          try {
               urlReal = new URL (str); // convert String to URL
          } catch (MalformedURLException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
In that code I "converted" a string to url where the string happened a real URL address.
Jan :)

Statvfs returns wrong values

Hi,
I am developing a program the will check for disk space (used,blocks, available ...) and i am using the statvfs.h file.
When tested with small capacity disks (~5G) it works fine (compared to df -k).
When tested with large capacity disks (~400G) it returns wrong values(compared to df -k).
I am using f_bavail and i am casting from fsblkcnt_t to integer/long.
Please help.
Thanx R.

Thanks for your answer.
I have discovered that it (statvfs.h) doe's not work with vxfs, only with ufs.
I am using Veritas Cluster Server.
Any chance of an answer ??
thanks,
R.

SXPG_COMMAND_EXECUTE return wrong parameter value

Dear all.
We have an Abap program that pulls an encrypted FTP file and saves it to our network.
After that we activate an external command via transaction SM69 by calling FM SXPG_COMMAND_EXECUTE.
This command is an execution of a batch file that executes a decryption method via PGP decryption software.
The problem is that we get an output parameter of this FM (STATUS) as u201CEu201D (error) although the decryption is being executed successfully.
We have the same process being activated same way successfully with another folders (rest is exactly the same).
Why does SXPG_COMMAND_EXECUTE return wrong status value ?
Regards,
Rebeka

SXPG_COMMAND_EXECUTE runs under certain operating system user account. Looks like that account does not have enough privileges to do what you want it to do. Look at the operating system for privileges (read,write,execute) of the user account SAPServiceuser or equivalent.
/Simo

SQL query return wrong Windows version

when excuting 'select @@VERSION' returns wrong Windows version. Why?

when excuting 'select @@VERSION' returns wrong Windows version. Why?
SELECT @@VERSION will return SQLServer version and not windows version
Even in case of sql, if you're seeing a different version from what your management studio suggests, then it may be that you're SSMS (client tool) is of another later version whereas the server instance which you're actually connecting to may
be of different (earlier) version.
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Why does the cell style index returning wrong CellFormat value when parsing excel cells using OpenXml SDK?

Consider a General format cell having a value of 39.95. When I fetch the CellFormat of the cell it returns wrong cell format-
CellFormat thisCellFormat = ((CellFormat)cellFmts.ChildElements[(int)thisCell.StyleIndex.Value]);
int fmtId = Convert.ToInt32(thisCellFormat.FormatId.Value);
The value of fmtId returned is 1, and in some cases 38, where it should be 2 or 39.
This issue is only for General format cells, I am getting correct id for Number format cells.
Below is the
Standard ECMA-376 Office Open XML File Formats specified set of implied cell formats for reference-
ID Format Code
0 General
1 0
2 0.00
3 #,##0
4 #,##0.00
9 0%
10 0.00%
11 0.00E+00
12 # ?/?
13 # ??/??
14 mm-dd-yy
15 d-mmm-yy
16 d-mmm
17 mmm-yy
18 h:mm AM/PM
19 h:mm:ss AM/PM
20 h:mm
21 h:mm:ss
22 m/d/yy h:mm
37 #,##0 ;(#,##0)
38 #,##0 ;Red
39 #,##0.00;(#,##0.00)
40 #,##0.00;Red
45 mm:ss
46 [h]:mm:ss
47 mmss.0
48 ##0.0E+0
49 @

The purpose of this forum is to support the Open Specifications documentation. You can read about the Microsoft Open Specifications program here,
http://www.microsoft.com/openspecifications/en/us/default.aspx
The library of Open Specification documents is located here,
http://msdn.microsoft.com/en-us/library/dd208104.aspx
It doesn’t appear that you are implementing one of the protocols cited. Your question may be more applicable to MSDN's Microsoft Office for Developers/Open XML Format SDK forum at
https://social.msdn.microsoft.com/Forums/office/en-US/home?forum=oxmlsdk
Bryan S. Burgin Senior Escalation Engineer Microsoft Protocol Open Specifications Team

On Firefox stage.stageWidth stage.stageHeight return wrong values

Hello,
I have a problem on firefox windows 8, stage.stageWidth and stage.stageHeight return wrong values,
swfobject.embedSWF("mySwf.swf", "mySwf", "500", "500", "14.0.0","expressInstall.swf", flashvars, params, attributes);
on ie, Chrome stage.stageWidth and stage.stageHeight return 500
on iFirefox stage.stageWidth and stage.stageHeight return 750 and my animation is smaller (66%)
Thanks

In order to target iPhone 5 you need to use AIR 3.5 beta or AIR 3.4
pointing to iOS 6 SDK. Be sure to include the [email protected] to
trigger the iPhone 5 size. In other words, the app has to be built
targeting the iOS 6 SDK and have the new default png to trigger the full
size on the iPhone 5.
AIR 3.5 beta includes the bits that to target iOS 6 SDK, but you can
target iOS 6 with AIR 3.4 by using the external SDK path in the package
ANE prompt in FB 4.6
http://labs.adobe.com
iBrent

Robot getpixelColor returns wrong color sometimes...

Hey
I ve got a problem. I read Pixels from a Game with the Robot getPixelColor method. Sometimes it returns right values, sometimes wrong! I check some pixels if they are white. The pixels dont move, so this same pixels are white everytime!.
Now sometimes he returns wrong colors. Instead of 255,255,255 ...it returns 0,12,25 or something like that. (with the same x, y coordinate).
My assumption is: My code is like following
CheckPixel(MyRobot.getPixelColor(30,40);
CheckPixel(MyRobot.getPixelColor(31,45);
CheckPixel(MyRobot.getPixelColor(36,20);
CheckPixel(MyRobot.getPixelColor(51,70);
Now it has to return 255,255,255 but somtimes its not working, he return 0,0.12 .... 0,0,15..... 255,255,255 .. or something like that
Could it be, that java does not refresh the robot object so fast when I call getPixelColor so fast in a row?
Is there a command with which I force Java to wait until the pointer is on the right x,y coordinate? Except of Thread.Sleep();
Thank you for your help..

ok I try:
Robot r = new Robot();
int x, int y;
x = getItSomehwere();
y = getitsomehwere();
for (int i= 0, i< 20; i++) {
if (isThatPixelsWhite(x, y) != 0) {
DoSomething;
public int isThatPixelsWhite(int x, int y) {
if (
r.getPixelColor(x+5,y+15).equals(Color.WHITE) &&
r.getPixelColor(x+7,y+19).equals(Color.WHITE) &&
r.getPixelColor(x+9,y+11).equals(Color.WHITE) &&
r.getPixelColor(x+21,y+5).equals(Color.WHITE) &&
r.getPixelColor(x+13,y+2).equals(Color.WHITE) &&
r.getPixelColor(x+23,y+7).equals(Color.WHITE) &&
r.getPixelColor(x+9,y+9).equals(Color.WHITE) &&
r.getPixelColor(x+10,y+21).equals(Color.WHITE) &&
r.getPixelColor(x+11,y+22).equals(Color.WHITE)
) return 1;
return 0;
}Thats the relevant code.
I guess the fast calling of getPixelColor in this if struct (in Method isthatPixelsWhite) overburd java ..

When orientation change and soft keyboard is activated, return wrong value

Hello,
in a View, when the orientation change and the soft keyboard is activated, this.navigator.height return wrong value.
systemManager.stage.addEventListener(StageOrientationEvent.ORIENTATION_CHANGE, orientationChangeHandler);
public function orientationChangeHandler(event:StageOrientationEvent):void {
inp.text=String(this.navigator.height);
thanks.

Can you attach a simple sample application that demonstrates this? What device are you seeing this issue on?

Problems with Adler32 class in JDK 1.5 (not tried 1.6)

When I use the java.util.zip.Adler32-class for generating Adler32-checksums, I found a couple of strange problems. When the total filesize (generating checksums of several files with the same checksum-object, using reset() in between) is 31999 bytes or greater, it gives pseudorandom output for the first file that exceeds the 31999 bytes. By running the test-program several times in a row, it seems like the output changes every second, as if random data was generated with the second counter as a seed. All the other checksums seem correct, and they do not change. A workaround that works for a series of only small files is to create a new Adler32-object for every file that needs its checksum generated, but that proves itself insufficient when a single file exceeds 31998 bytes of size (31999 or above).
I've tried different inputstreams and various methods of using the update(xx)-functions of the Adler32, but I always get the same results. Is this a known bug (Note: JDK 1.5, not 1.6)? Or am I doing something obviously wrong? Example source code can be provided if necessary.

R,
I'm disappointed to see that you haven't received any replies to this. I am experiencing a very similar problem. What I have noticed is that the problem occurs when the combo-box is forced to be heavy-weight (meaning it has to draw itself outside the bounds of the window). In those cases, I can never pick a different value from the combo-box in the table. The exact same app run under 1.3.1 does not have any problems. Further, combo-boxes not in table views do not seem to have any problems even when they are heavy-weight.
Paul

Date class of jdk 1.5.0 returns wrong Date.

Similar Messages

Maybe you are looking for