Date Control should highlight more than one range of dates in a month.

Hi All,
Date Control should highlight more than one range of dates in a month.We are creating a web interface for PR01 ( Travel Management Module ) , in a month a traveller can have more than 2 trips and we need to highlight all the travel date ranges in the Web DynPro date range control.
Thanks & Regards
Gaurav Jain

Hi Thomas,
I used DateNavigatorLegend and DateNavigatorMarking and did not give any default value or context mapping to the DateNavigator element.
The DateNavigator is now highlighting only the first dates of the ranges that I have created in the WDDOINIT method.The DateNavigatorMarking takes only one date not 2 dates in the properties So kindly suggest how to display multiple date ranges.
Thanks & Regards
Gaurav Jain

Similar Messages

How do I highlight more than one thing at a time on a Mac please

how do I highlight more than one thing at a time on a Mac please

Do you mean items in Finder?
To highlight (select) a whole block of items :
- click the top item you want
- hold down Shift
- click the bottom item you want
The whole range from top to bottom will be highlighted
To select random items :
- click the first item
- hold down the Command key
- click any more items anywhere in the list
Just the items you clicked will be highlighted
This technique works also in apps like iTunes, iPhoto, etc.

I cannot highlight more than one e-mail. I am concerned about this when I am in the Junk mailbox. I do not want to open any e-mails that are in this mailbox.

I cannot highlight more than one e-mail. I am concerned about this when I am in the Junk mailbox. I do not want to open any e-mails that are in this mailbox.

Two thoughts:
1. You never need to open any emails in the junk mailbox. You can simply do Mailbox > Erase Junk Mail from Mail's menu.
2. What happens if you hold the shift key after highlighting the first in a series of emails, then click the second one with the shift key depressed? That should hightlight both.

How can I highlight more than one pic at a time?

First of all, THANKS for anyone that may answer since APPLE obviously has no desire to get off their ***** and help their customers.
About ten days ago I was prompted to install apples new operating system. So of course I clicked OK, idiot that I am!
Now I'm stuck with this new piece of **** operating system that I wish I could uninstall.
ANYWAY,
I upload a lot of pix for stuff I sell on EBay, sometimes 3-400 at a time. When I delete photos it's usually 1,000 at a time, and I assure you I'm not exaggerating. Up until now I was able to touch the END pic and swipe the whole horizontal row with two fingertips and the whole row of 7 would get checked. With the new ios7 I am unable to do it anymore (yet ANOTHER reason I don't want this 'improved' OS).
Does ANYONE know of a way to highlight more than one pic at a time?? Remember the old windows system where you could click one pic, then hit SHIFT and click a lower one and it would highlight them all, in between, for a quick delete?
There MUST be a way to delete, or rather highlight (or CHECK) more than one pic at a time? Anyone?
THANKS, Rich

Yes, I know the photos stored on the device... But which app are you accessing the photos with? Which app do you want to be able to highlight more than one pic at a time in?
There are literally thosands of apps that access the iOS Photo Library - which one(s) are you using?

Using a ommand to generate more than one row of data in utl file

Hi Guys
This might be a pretty long one. But I require help with regards to using outer and inner loops within my code.
Here is the task:
Each account involved with the DCA Allocation has an entry in the DCAACCOUNTALLOCATION table to track its progress. The STATUS value of the entry shows the position of the account in the DCA Allocation process.
The status entry being tested is 3.
Below is the code:
create or replace
PROCEDURE DCA_BMW_OUT
IS
-- Declare all variables as reference
v_out_file UTL_FILE.FILE_TYPE;
v_row_Count NUMBER;
r_bmw NUMBER;
v_out_directory all_directories.directory_path%type;
v_out_filehandle UTL_FILE.FILE_TYPE := NULL;
v_out_buffer varchar2 (32767);
v_records NUMBER;
body_output varchar2(32759 BYTE);
dictionary_guarantorsexist varchar2 (1 Char);
-- Text required within this part of the procedure
v_body varchar2(32767 BYTE);
v_header VARCHAR2(32759 BYTE);
BEGIN
FOR r_bmw IN
( SELECT *
FROM dcaadditionaldata
WHERE directory_name IS NOT NULL
) LOOP
BEGIN
-- Output file to be added into the directory specified
v_out_file := utl_file.fopen (r_bmw.directory_name, 'DCAExport_1_' || TRIM(TO_CHAR(SYSDATE,'DDMMYYYY_HH24MISS')) || '.txt', 'W');
-- The Header data which will be outputted to the file
v_header := 'KennzeichenBrgschaftsforderungGesamtforderung|Währung|Übergabedatum|DifferenzierungAnwalts-oderInkassofall|MainMarktpartnernummer|
MainAnrede|MainTitel|MainName|MainVorname|MainStraße|MainHausnummer|MainPLZ|MainOrt|MainLand|MainGeburtsdatum|MainTelefonnr.Schuldner|G1Marktpartnernummer
G1Anrede G1Titel G1Name G1Vorname G1Straße G1Hausnummer G1PLZ G1Ort G1Land G1Geburtsdatum G1Telefonnr.Schuldner G2Marktpartnernummer G2Anrede G2Titel
G2Name|G2Vorname|G2Straße|G2Hausnummer|G2PLZ|G2Ort|G2Land|G2Geburtsdatum|G2Telefonnr.Schuldner|G3Marktpartnernummer|G3Anrede|G3Titel|G3Name|G3Vorname|
G3Straße|G3Hausnummer|G3PLZ|G3Ort|G3Land|G3Geburtsdatum|G3Telefonnr.Schuldner|G4Marktpartnernummer|G4Anrede|G4Titel|G4Name|G4Vorname|G4Straße|G4Hausnummer|
G4PLZ|G4Ort|G4Land|G4Geburtsdatum|G4Telefonnr Schuldner|G5Marktpartnernummer|G5Anrede|G5Titel|G5Name|G5Vorname|G5Straße|G5Hausnummer|G5PLZ|G5Ort|G5Land|
G5Geburtsdatum|G5Telefonnr.Schuldner|Kundennr.|Bestandsnr.|Finanzierungsnr.|KennzeichenFinanzierung/Leasing|Kennzeichenprivat/gewerblich|
reguläresVertragsende|Laufzeit|Vertragsdatum|Vertragsstatus|Ratenbetrag|Filiale/Gebiet|Finanzierungstyp|BankverbindungKonto|BankverbindungBLZ|
RSVKennzeichen|Kündigungsdatum|Modell|Fahrgestellnummer|KFZKennzeichen|KFZZulassungsdatum|CoD1Marktpartnernummer|CoD1Anrede|CoD1Titel|CoD1Name|
CoD1Vorname|CoD1Straße|CoD1Hausnummer|CoD1PLZ|CoD1Ort|CoD1Land|CoD1Geburtsdatum|CoD1Telefonnr.Schuldner|CoD2Marktpartnernummer|CoD2Anrede|CoD2Titel|
CoD2Name|CoD2Vorname|CoD2Straße|CoD2Hausnummer|CoD2PLZ|CoD2Ort|CoD2Land|CoD2Geburtsdatum|CoD2Telefonnr.Schuldner|CoD3Marktpartnernummer|CoD3Anrede|
CoD3Titel|CoD3Name|CoD3Vorname|CoD3Straße|CoD3Hausnummer|CoD3PLZ|CoD3Ort|CoD3Land|CoD3Geburtsdatum|CoD3Telefonnr.Schuldner|CoD4Marktpartnernummer|
CoD4Anrede|CoD4Titel|CoD4Name|CoD4Vorname|CoD4Straße|CoD4Hausnummer|CoD4PLZ|CoD4Ort|CoD4Land|CoD4Geburtsdatum|CoD4Telefonnr.Schuldner|
CoD5Marktpartnernummer|CoD5Anrede|CoD5Titel|CoD5Name|CoD5Vorname|CoD5Straße|CoD5Hausnummer|CoD5PLZ|CoD5Ort|CoD5Land|CoD5Geburtsdatum|
CoD5Telefonnr.Schuldner Y|Y|5830,99|EUR|20/08/2009|DCA|4|123456|Herr||Mueller|Rainer|Messigasse|33|84432|Filz|Deutschland|01/07/1957|08912345|234567|Frau|Dr|Mueller|Rita|Messigasse|33|84432|Filz|Deutschland|13/12/1955|08912345|||||||||||||||||||||||||||||||||||||||||||||||||76543|5000234567||Lease|Privat|12/12/2013|60|12/12/2008||250,50|US|Rate|1234567890|32343450|N||BMW 320 i|W34567890PA34567|M-H-3456|09/12/2008||||||||||||||||||||||||
N|450,80|EUR|20/08/2009|DCA|4|987654|Frau||Meier|Heide|Beinstr.|44|86353|Laus|Deutschland|03/06/1949|08987654|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||87654||8765675585|Loan|Gewerblich|14/03/2012|72|14/03/2006||500,01|DF|Select|976579657|32343450|N||BMW 500 sl|W94567890PA34568|M-H-3457|10/03/2006|34343434|Herr|Dipl|Meier|Rudolf|Heislestr.|69|85433|Maus|Deutschland|28/05/1945|08934567|234567|Frau|Dr|Mueller|Rita|Messigasse|33|84432|Filz|Deutschland|13/12/1955|08912345
Y|33970,50|EUR|20/08/2009|Lawyer|4|64646464|Frau||Schmidt|Susanne|Hueftgasse|55|89363|Maus|Deutschland|23/08/1933|08934567|34343434|Herr|Dipl|Meier|Rudolf|Heislestr.|69|85433|Maus|Deutschland|28/05/1945|08934567|234567|Frau|Dr|Mueller|Rita|Messigasse|33|84432|Filz|Deutschland|13/12/1955|08912345|||||||||||||||||||||||||||||||||||||98757|5000785675||Lease|Privat|11/11/2009|48|11/11/2005||380,70|GH|Zielrate|234567899|32343450|Y||BMW 380 s|W54567890PA34569|M-H-3458|07/11/2005||||||||||||||||||||||||
N|10040,20|EUR|20/08/2009|Lawyer|4|4865465|Herr||Schulz|Karl|Nasenweg|77|83354|Schuh|Deutschland|18/01/1965|08972545|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||46789|50004765787||Lease|Privat|16/09/2012|60|16/09/2007||1234,56|OS|ZUS|98765432|32343450|Y||BMW 280 i|W74567890PA34570|M-H-3459|12/09/2007||||||||||||||||||||||||';
utl_file.PUT_LINE(v_out_file,v_header,TRUE);
-- Below will output a row of data which satisfy the requirements.
FOR body_output IN
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 3
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
LOOP
UTL_FILE.PUT_LINE (v_out_file,
body_output.CUSTOMERNUMBER|| '|' || body_output.ACCOUNTNUMBER|| '|' ||body_output.CDTITLE|| '||' ||body_output.CDFIRSTNAME || '|||||' ||
body_output.CDLASTNAME|| '||||' || body_output.ACCOUNTTYPE|| '|' ||body_output.ORIGINALCONTRACTENDDATE|| '||||' ||body_output.CONTRACTTERM || '|||||' ||
body_output.CONTRACTENDDATE|| '|' || body_output.BRANCHAREA|| '||' ||body_output.PRODUCTTYPE|| '||' ||
body_output.HOUSEBANKACCOUNT|| '|||' || body_output.CARMODEL|| '||||' ||body_output.CARLICENCE|| '|' ||
body_output.ARREARSBALANCE|| '||||' || body_output.CODEBTOR|| '|' ||body_output.GUARANTORnumber);
END LOOP;
UTL_FILE.fclose (v_out_file);
EXCEPTION
WHEN OTHERS THEN
UTL_FILE.put_line (v_out_file, 'failed');
-- If any errors occur when closing the file, then we close the opened file.
IF utl_file.is_open(v_out_file) THEN
UTL_FILE.fclose (v_out_file);
END IF;
END;
UPDATE DebtEpisodes
SET handoverdate = null
WHERE DCAORLAWYER = 'DCA'
AND accountid IN
( SELECT accountid
FROM Dcaaccountallocation
WHERE Dcaaccountallocation.status = 3
AND Dcaaccountallocation.dcaid = 41
END LOOP;
END DCA_BMW_OUT;
Currently, the above codes issue is that although many rows of data have been inputted in all the tables, with regards to the select criteria above (in italics), it only produces one row of data when i expect more than one to appear.
If the query only outputs one row but you're expecting it to produce more than one row, then you need to dissect the statement to find out where the output is being unduly restricted
I was told maybe an outerloop or an inner loop would do the trick, but really stuck on how and where to put it.
Hope this makes sense guys and I would really appreciate your time.
Thanks

if i run this particular code
( SELECT
AccountDetails.CUSTOMERNUMBER, AccountDetails.ACCOUNTNUMBER, CUSTOMERDETAILS.CDTITLE, CUSTOMERDETAILS.CDFIRSTNAME, CUSTOMERDETAILS.CDLASTNAME, AccountDetails.ACCOUNTTYPE,
AccountDetails.ORIGINALCONTRACTENDDATE, AccountDetails.CONTRACTTERM, AccountDetails.CONTRACTENDDATE, AccountDetails.BRANCHAREA, AccountDetails.PRODUCTTYPE,
AccountDetails.HOUSEBANKACCOUNT, AccountDetails.CARMODEL, AccountDetails.CARLICENCE, AccountDetails.ARREARSBALANCE, AccountDetails.CODEBTOR, AccountDetails.GUARANTORNUMBER
FROM AccountDetails
JOIN CUSTOMERDETAILS ON AccountDetails.CUSTOMERNUMBER = CUSTOMERDETAILS.CUSTOMERS1
WHERE EXISTS
( SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
AND DebtEpisodes.DCASentDate IS NULL
AND Dcaaccountallocation.ACCOUNTID = AccountDetails.ACCOUNTNUMBER
AND DebtEpisodes.DCAORLAWYER = 'DCA'
This returns 1 row of data
However if i run a small part of the above code...
SELECT *
FROM Dcaaccountallocation
JOIN DebtEpisodes ON DebtEpisodes.ACCOUNTID = Dcaaccountallocation.ACCOUNTID
WHERE Dcaaccountallocation.dcaid = 41
AND Dcaaccountallocation.status = 2
It returns a lot of rows with a status of 2
Now i presume what I am going to do is to ensure that all the fields provide satisfactory requirements, with regards to the above code. Although I have many records in all the stated tables already.
:(

How can I highlight more than one song to transfer to my playlist?

How can I highlight more than one song to transfer to my playlist?

Standard method in OSX to select multiple items from a list:
For blocks of items - click on first, shift click on last.
For selecting multiple items at random - click on first command click on others.

A header data can have more than one lie item data !

How can a header data have more than one line item data ?

Hi,
header table will have only main data where as the item data will have material delivery date other things based on the availabilty and committement
http://help.sap.com/saphelp_srm30/helpdata/en/38/4cc5376848616ae10000009b38f889/content.htm
Regards
Shiva

Can I set up a Contribute administrator control panel on more than one computer?

I am ust getting started with Contribute. I generally create/edit websites & content on my company's shared drive at work, and then upload to our websever. I successfully set up the administrator role on my computer at home. How can I set up the same control panel on my laptop at home without un-doing all that I have created at work?

Thanks! I thought this would probably be the case, but since iTunes allows me to authorise more than one machine, I thought that it was just possible that QuickTime might do the same. Back to the drawing board ...
Cheers,
Andrew.

Configuring more than one LDAP as data source

Hi Portal Gurus,
We have requiremnt to configure MS ADS LDAP-> DEEP HIERARCHY & Sun one LDAP->FLAT HIERRARCHY as PORTAL Datra Source.we have already configured MS ADS LDAP.
for merging these 2 LDAPS as a data source can anybody having experiece ...
we tried to configure with the below server parameters for 2nd lDAP merging as per below reference
Configuration of More Than One LDAP Data Source"http://help.sap.com/saphelp_nw04/helpdata/en/4e/4d0d40c04af72ee10000000a1550b0/frameset.htm".But
we could not suceeded.
Server parameters:
Server: xxxx:23xx
LDAP Search root: dv=hub, o=vds
Connection ID: cn=Directory Manager
password: xxxxx
we dont have user path or group path for the above 2nd LDAP.
anybody can help in this ..
Regards
Tag

Tag,
It sounds like this issue might be releated to the fact that your second LDAP connection is to SUN One. Maybe one of these links will help
http://help.sap.com/saphelp_erp2005vp/helpdata/en/aa/8f10f1e2bae346bef2853aa0f88f4c/frameset.htm
or
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/4c3725aeaf30b4e10000000a11466f/frameset.htm
Regards,
Keith
Message was edited by: Keith Crossett

How to display the date from callender for more than one date format items

i have one form which contains many date format items. i want to show the calendar and take the date from calendar.
i am successfully show the calendar and take the date from calendar for one date item.
my problem is i want to do same for all date format items in the form
can any one help me?
thanks

Maybe you could provide more information.
What calendar ? what item works ? what other don't ?
is the issue in the different format masks ?
Please elaborate more your situation.
Francoisit is not the issue of different format masks.
i created a block which name is jbeanblock. in this block item is bean. bean has one trigger when_custom_item_event.
the code of this trigger is :
DECLARE
eventName varchar2(30) := :system.custom_item_event;
eventValues ParamList;
eventValueType number;
LC$Date varchar2(256);
LC$Day varchar2(256);
LC$Month varchar2(256);
LC$Year varchar2(256);
v_date date;
BEGIN
IF (eventName='CALENDAR_EVENT') THEN
eventValues := get_parameter_list(:system.custom_item_event_parameters);
get_parameter_attr(eventValues,'CALENDAR_EVENT_DATE',eventValueType, LC$Date);
get_parameter_attr(eventValues,'CALENDAR_EVENT_DAY',eventValueType, LC$Day);
get_parameter_attr(eventValues,'CALENDAR_EVENT_MONTH',eventValueType, LC$Month);
get_parameter_attr(eventValues,'CALENDAR_EVENT_YEAR',eventValueType, LC$Year);
Clear_Message;
select to_date(LC$Day||'/'||LC$Month||'/'||LC$Year,'dd/mm/yyyy') into v_date from dual;
:ds_employee.hiredate:=v_date;
synchronize ;
END IF;
END;
hiredate is the item of the ds_employee table. hiredate has trigger when_new_item_instance. The code is
Set_Custom_Property('JBEANBLOK.BEAN',1, 'SHOW_CALENDAR','50,50');
ds_employee is my table name. which has 2 date items. one is hiredate and another is date_of_birth.
for hiredate it is working. if i want to do same thing for date_of_birth also then how can we do?

Highlight more than one area of slide at same time

I am using Captivate v4.
When I want to highlight something on a slide (e.g. a section of a screen shot) I like to use the Highlight Box with the "Fill outer area" option as this really does have a visual impact and "draws the eye". This works fine when you only have one section to "highlight".
What this wont do is allow you to highlight two or more areas of the slide at the same time, as the "fill" covers all other highlighted area.
My question is...any tips or smart/proven methods as to how to "highlight" multiple sections of a slide at the same time that draws the learners eye to the sections you want them to concentrate on ?
I can always just put a highlight box around the items, but was hoping for something with a little more impact as you do get when using the "fill outer area option".
Thanks in advance.
Noel

Hi Noel
I've done exactly that on several occasions. And I've done it using the technique Lilybiri describes. You need to grab a screen capture of your image, then apply the formatting using something like SnagIt, Photoshop or any other image editing tool. Personally I use SnagIt for something like this.
Then you insert the modified image. I generally use Rollover Images for mine.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Why does the "A" button go inactive when I highlight more than one name to start a group chat?

I can't consistently start a group chat! Help! Sometimes it works, and sometimes it doesn't.

Hi,
AIM, Jabber, MSN (Windows Live), and Yahoo are the major IM services.
AIM, MSN and Yahoo operate through their own Central server where you have to Login with a Name that is valid with that server.
Jabber is a collection of Public and private servers which then are linked together via what is called Federation.
AIM issue (or allow you to register) names directly and through several agreements with ISP and other services.
Apple has one of these Agreements and Names Ending in @Mac.com and the MobileMe @Me.com names are Valid AIM Screen Names.
AIM Names themselves tend to be just plain names where as others are or look like emails.
Anyone of these three Names would be considered to be an "AIM" Buddy list in iChat as it logs in to the AIM Server.
Google run the GoogleTalk service to allow Chats through their Web Mail Page.
This is a Jabber server.
Facebook seem to run a similar type of service.
People and organisations that run Jabber servers can elect to run what are called Transports as well.
These allow links to the other major services.
An AIM transport would allow them to Add AIM buddies to their List and so on.
iChat can also log in to Jabber servers including the GoogleTalk one
The AIM App for PCs which is up to version 7.2.something can also allow people to Add their Facebook and Google Buddies (sort of Reverse Transport if you like).
I haven't downloaded the latest AIM for Mac version to see if it does the same.
The short answer then is that all the major players are beginning to allow the adding of Buddies from other services.
This is further complicated or involved, in that the major Social sites are also allowing people to link various Buddy lists in to one overall list.
This tend to mean that if you link Facebook with Google Buddies and AIM Buddies there appears to be some sort of "Feedback" that allows those names to then appear in your AIM Buddy list.
It does seem to somewhat fall down when you try and do Group Chats due to the different ways the major services conduct these chats.
8:14 PM Thursday; July 7, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.7),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Calendar - how to enter more than one event per date and show it in the Month display?

I would like to enter multiple events (two, anyway) for a single day in the calendar. I would also like that Month view to display the two events. So far, all I've been able to do is enter a single event; in fact, only a single line for the single event. If I enter in Notes, they're not displayed in the Month view. Thank you.

I assume that you are tapping the + sign to enter additional events and that is not working so try quitting the app and restart the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

How do you highlight more than one file at a time on a Macbook Pro?

I tried the holding down the shift key method but it doesn't work on my computer for some reason....

Use the ⌘ (Command) key.
Switch Basics: On Windows, I used to...

[SOLVED] Report Repeating Frame Will Not Print More Than One Page of Data

I have a layout which contains only 1 repeating frame, and is not contained in any other frames. The query that the group of this frame is based on returns 414 rows. The report is a character based report of 180x66. All of the fields in the repeating frame are all in a straight line on a single row.
No matter what I do, the report ends at the bottom of the first page. If I put the frame at row 30, only 36 rows are printed. If I put the frame on the first row, it stops at 66. No mater what I do, it will not continue on the next page.
Any ideas on what could be the problem here?
Thanks,
Kurz
Edited by: Kurzweil4 on Oct 13, 2008 3:35 PM
Print condition was set to All. Changing it to First solved the problem.

Make sure the repeating frame is variable vertically and that all the frames that it encloses are variable.

Date Control should highlight more than one range of dates in a month.

Similar Messages

Maybe you are looking for