Date data not showing in infocube

dear experts,
i am new to bw however i have been assigned by my organisation to try and produce some results,so i am in need of your help
what i ve done this far is create rfc connections between bw and sap and install some of the ready infocubes in bw (we are in healthcare so using is-h infocubes)
my problem is that even though i get data in my infocubes and i am able to create some basic reports ie i can view what services we ve sold, hospital room occupancy statistics etc, i am facing a problem with dates
more specifically in the 'time' dimension of my infocubes i have nothing, no dates whatsoever anywhere, no calendar year no month nothing
i ve checked,through rsa3 my infosources that bring the data from sap and dates exist there normally
any suggestions what i could check next as you can imagine without dates my reports are useless
thanks

Hi,
I think the problem lies in the mapping of the date field in the transformation.
Lets say you have a field 'Created on Date' in the data source. Map this field to the time characteristics 0CALDAY, OCALYEAR which will be present in the cube. Do this mapping in the transformation. After that load the data again and check.
Hope this helps.
Regards,
RahulM

Similar Messages

Master Data Attributes not showing in InfoCube

Hi Experts,
I'm a little lost here. I have loaded the master data for a field ZPARTY(data coming from 3 non-SAP sources S1, S2 and S3) with all its attributes. I have actovated it and I see it as well in the BEx.
Now I have loaded related Transaction data and and I have ZPARTY in that InfoCube as well. Now I can see the attibutes showing up in InfoCube from S1 and S2 but not from S3.
I have deleted the data and reloaded it as well. I made sure that the SIDS get generated as well and I can see SIDs as well but I do not see the data from S1 for the master data attributes.

Hi,
You can check the following things,
1) In the infoobject maintainance screen on the attributes tab, just check that attributes coming from S3 are marked as Navigation attributes.
2) Check whether they are time dependent or independent attributes.
3) Once you load all the data check it in master data view of ZPARTY infoobject and make sure that all the data is active.
4) If you are not able to see the data loaded then check the underlying mappings of infoobject from S3 to ZPARTY in transformation or transfer rule.
5) Finally in infocube check that you have marked all the navigation attributes available for reporting.
Regards,
Durgesh.

In IPhoto I changed movie dates after thumb nails were created in IMovie but the new dates are not showing up in IMovie. Is there someway to refresh the IPhoto event in IMovie?

Background: I'm transferring file folders from a Visa laptop via an external hard drive to my IMac. In the folders are photos and videos from different cameras. SO I first tried to import to IMovie but it would not recognize any of the files. So then I imported into IPhoto and both photos and videos were imported and I created events for each folder. When I first opened IMovie I had to wait for it to create "thumb nails". Then I could view the events in IMovie BUT the video clips are not together because they have vastly different dates and are mixed with videos from other events. I looked at the dates and said I can fix that in IPhoto which i did but those new dates are not showing up in IMovie. I think I need to somehow refresh the event data that Imovie is using but have not found how to do that in either IPhoto or IMovie.
I'm doing this on three events with about 100 photos and videos. But I have many 1000s more to do so need to know how to either fix this or delete these events, reimport, change the dates, then open again in IMovie. I'm sure that would work but I can't understand why changing the dates in IPhoto is not being reflected in IMovie.
Appreciate any tips or pointers.
OBTW this is my first question as a first time Apple owner.

It was suggested I move this question to IPhoto or IMovie which I did.
Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

After importing images from my card using LR 5.4, the GPS data does not show in the metadata panel. However, when I look at the imported images using Bridge, the GPS data is visible. Anybody know why LR is not seeing the GPS data? Camera is Canon 6D.

Ok, the issue seem to be solved. The problem was this:
The many hundred files (raw and xmp per image) have been downloaded by ftp in no specific order. Means - a couple of files in the download queue - both raw and xmps. Most of the time, the small xmp files have been finished loading first and hence the "last change date" of these xmp files was OLDER than the "last change date" of the raw file - Lightroom then seem to ignore the existence of the xmp file and does not read it during import.(a minute is enough to run into the problem)
By simply using the ftp client in a way that all large raw files get downloaded first followed by the xmp files, we achieved that all "last changed dates" of the xmp files are NEWER than the related raw files. (at least not older)
And then LR is reading them and all metadata information has been set / read correctly.
So this is solved.

Time of email shows in Date Column, Date is not showing on new emails

Date is not showing in Date column. Only time is showing.
I just migrated from OE - Old emails show the time & Date.

If these are emails received today that is normal. Thunderbird assumes you know what day it is and only displays the time for messages received today. It will append the date to these messages at midnight tonight.

Due date is not showing up in UWL

Hi ,
Due date is not showing up in UWL. Back end is ECC not GP Just regular work flow.
I can see in workflow object end date kind. But the field is blank. For due date any additional configuration needed.
I really appreciate your help.
Regards
Mark

Hi,
As far as I remember correctly, the Due Date in UWL is the Requested End date in the workflow. So basically you need to open the workflow in backend in WF builder and look at the step. There is a tab for setting different deadlines and stuff. If you do the settings there (for example set the requested end in 3 days), I think that work item will display the due date based on that data.
Regards,
Karri

Data is not showing up in report on ODS

Hi All,
we have requirment like below
we have an ODS no update rules and nothing with 5 fields . with bex reporting flag checked..
we have function module to fill the data for these 5 fileds in ODS active data table .
So data is there only in active data table that table was filling by using function module.
so i need report that data .when i created and run the report data its not showing up.
Please let me know whats the issues is and how to handle.
I appreciate your help
Regards,
Sirisha

In this case you need to use Write-Optimized DSO or if you are in earlier version, then you need to use Transactional ODSinstead of basic DSO.
thanks.
Wond

BizTalk BAM Data is not showing

In BizTalk 2010, BAM Data is showing correctly.
But in BizTalk 2013, BAM Data is not showing correctly while I am applying the same procedure for both.
Event Log shows not any error.
What I have to check for getting BAM data in 2013 ?
Which configurations should I check ?
Any kind of help would be appreciated.
Prakash

Prakash,
There are two parts to it:
Deploying the BAM definitions, which would create the BAM activities and its related DB artifacts.
Deploying the Tracking profile. This step hooks you port/Orchestration/messages to the db artifacts created in step-1.
If you see the BAM tables and its related DB artifacts means BAM definitions has been deployed.
If event log is clean, no data in
TDDS_FailedTrackingData, no data in AllInstances view , you have checked the above suggestions like TDDS means, then it could be the second step which is deploying the tracking
profiles may not have happened properly.
Check the following article for help:
Deploying and Undeploying Tracking Profiles
How to Deploy Tracking Profiles with the Tracking Profiles Management Utility
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Data selection not showing in Planning book

Hi everybody,
We were using one info cube on APO side and so from cube the data will be shown in the APO planning book..
Now we modifed the cube on APO by adding new infosource and new mappings from BW side with data marts.. I can see the data is successful loaded to cube, but the slection it self is not showing.. i dont see anything related to cube and so i couldnt run the planning book.. My point is data is available in cube bu planning book now have no data...it is not showing any data..
thanks
arya

There might be few things you should probably check
1) In the planning object structure just activate the POB. through the context menu.
2) I think you might have assigned the Infocube into the Planning areas as Infocube Fed key figures. Make sure that all the characteristics remain the same. There might be inconsistency between the char of the new Cube and the already existing PA.
3) Create time series to the PA or perform initialization of the PA.
4) Try creating a CVC manually and see if it allows to create.
Atleast now you should be able to see the key figures in the Planning Area.
Let me know if it works.

Oracle apps Data does not show in Discoverer

When running my query in sql developer, I have to execute the command apps.fnd_global.apps_initialize(user_id, resp_id, resp_appl_id) in order to show the result of my query. Without this, the query returns nothing. The problem is I am using this query as a custom query for my Discoverer report and my report does not show any record. Anyone knows how to handle this?

Hi,
There can be many reasons why a Discoverer report does not return data, but I don't think it will be because the session is not apps initialized. Check that the language has been set correctly, using the calculation userenv('lang').
As I don't know anything about your environment, it is a bit hard to guess what else might be causing this issue. Is there anything different about this report? What is the custom query that you are running?
Rod West

2lis_03_bf data is not showing data in RSA3

Hi,
I have loaded 2lis_03_bx first for a plant using MCNB transaction,its showing data in RSA3 then I have loaded 2lis_03_bf datasource for the same plant using transaction 0LI2BW. but it is not showing data in RSA3.
I have done the above process in background.
In SM37 it is showing the following message for the 2lis_03_bf datasource
<b>Job started
Step 001 started (program RMCBNEUB, variant &0000000000003, user ID TCS_SRM)
Date fields for info structure S032 are not generated
Job finished</b>
steps:
1.Before loading the data I have deleted data using LBWG
2.In LBWE, 2lis_03_bf is already activated.
Please help me out on resolving the above issue
Thanks in Advance

ODS Settings
BEx reporting option --> If this indicator is not set, no SID's are generated for the new characteristics when the data in the ODS object is activated.This optimizes the performance of the activation process, but the ODS object is not available as an InfoProvider for queries.
Refer this link for more information...
http://help.sap.com/saphelp_nw04/helpdata/en/a6/1205406640c442e10000000a1550b0/frameset.htm

My ICal data does not show up on Subscribers Calendar

Following all of the instructions how to get my ICal information to another Apple Computer (Macbook Pro) however when we access the Macbook Pro the data from my Calendar does not show up. Calendar is there, just the data does not make it across.
Any thoughts.
Thanks Mark

Thanks for the information.
If you view the same calendar on the MobileMe website, do you see the events?
http://ical.me.com/yourmembernamehere/calendarname
If you don't see the events on the calendar web page then the publish did not go through succesffully. Un-publish the calendar, make a slight change to its title, and then re-publish and test.
If you do see the events on the website but still not in iCal on the 10.6.8 system:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Remove the subscription for iCal to that specific calendar.
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
4. Launch iCal and re-add the subscription.
Hope that helps!

Data is not updated to Infocube (BI 7.0) when i load from flat file

Hi Experts,
               when I try to load data from flat file to Infocube (BI 7.0) with full or Delta, I am gettin following errors.
1) Error while updating to data target, message No: RSBK241
2) Processed with Errors, Message No: RSBK 257.
Till transformations everthing is successful but updating data to cube is not successful...
what is the message no. indicates? can i find solution anywhere with respective to Message NO.?
Anybody please help me..
Regards
Anil

Hi Bhaskar,
                   There is no problem with cube activation.But i try to activate the cube by using
the function module " RSDG_CUBE_ACTIVATE". It goes to short dump.Anyhow i want to know
that in what scenario we use this function module to activate the cube.
         There is no special characters in the file. I delete the requests in psa, cube and Re run the
Infopackage & DTP.But I am getting same error.
The following errors are found in updating menu
of details tab (display messages option)
1) Error while updating to data target, message No: RSBK241
2) Processed with Errors, Message No: RSBK 257.
                 Thank you
Regards
Anil
Edited by: anilkumar.k on Aug 20, 2010 8:35 PM

Data is not showing in R/3 ztable whlie creating XI inbound proxy.

Hi experts,
    I am creating an XI inbound proxy for zxx_stockyard_price_ib_dt ,
I created Ztable(this structure contains both filename and data structure) in R/3 and i am writing a code in sproxy to fetch the data from XI to R/3, R/3 is to fill and store the data in a ztabe .
XI data file is ok, however , when executed ,the input file of XI is not reflecting in the R/3 Ztable,
I need a help in this scenario,
here is the peice of code,
METHOD zxx_ii_stockyard_price_ib_mi~stockyard_price_ib_mi.
DATA : it_zxx_stockyard_price_ib_dt        TYPE table of zxx_stockyard_price_ib_dt ,   " input batches from file
         wa_zxx_stockyard_price_ib_dt        TYPE zxx_stockyard_price_ib_dt         ,
         i_zrva_trv_interfa                  TYPE TABLE OF zrva_trv_interfa ,
         wa_zrva_trv_interfa                 TYPE zrva_trv_interfa.
******fill input internal table from XI
wa_zxx_stockyard_price_ib_dt = input-stockyard_price_ib_mt.
*fetch the records from XI.
LOOP AT it_zxx_stockyard_price_ib_dt INTO wa_zxx_stockyard_price_ib_dt.     " looping input data of XI nd moving the data to R3.
    MOVE-CORRESPONDING wa_zxx_stockyard_price_ib_dt TO wa_zrva_trv_interfa.
    APPEND wa_zrva_trv_interfa TO i_zrva_trv_interfa.
   Modify zrva_trv_interfa FROM WA_zrva_trv_interfa.
ENDLOOP .
IF NOT i_zrva_trv_interfa IS INITIAL.
    LOOP AT i_zrva_trv_interfa INTO wa_zrva_trv_interfa.
      MODIFY zrva_trv_interfa FROM wa_zrva_trv_interfa.
      CLEAR wa_zrva_trv_interfa.
    ENDLOOP.
ENDIF.
FREE i_zrva_trv_interfa.
ENDMETHOD.
when execute and debugged i found the values are not showing in internal table i_zrva_trv_interfa (loop at i_zrva_trv_interfa), where i am going wrong?

> here is the peice of code,
>
> METHOD zxx_ii_stockyard_price_ib_mi~stockyard_price_ib_mi.
>   DATA : it_zxx_stockyard_price_ib_dt        TYPE table of zxx_stockyard_price_ib_dt ,   " input batches from file
>          wa_zxx_stockyard_price_ib_dt        TYPE zxx_stockyard_price_ib_dt         ,
>          i_zrva_trv_interfa                  TYPE TABLE OF zrva_trv_interfa ,
>          wa_zrva_trv_interfa                 TYPE zrva_trv_interfa.
>
> ******fill input internal table from XI
>   wa_zxx_stockyard_price_ib_dt = input-stockyard_price_ib_mt.
>
I think here at this place you have problem. As per your code you have moved the input-stockyard_price_ib_mt to wa_zxx_stockyard_price_ib_dt BUT you have not appended to the internal table it_zxx_stockyard_price_ib_dt.
If I am wrong then make sure it_zxx_stockyard_price_ib_dt is filled correctly before you loop on it.
also add the below check befor looping.
IF NOT it_zxx_stockyard_price_ib_dt is INITIAL.
> *fetch the records from XI.
>   LOOP AT it_zxx_stockyard_price_ib_dt INTO wa_zxx_stockyard_price_ib_dt.     " looping input data of XI nd moving the data to R3.
>     MOVE-CORRESPONDING wa_zxx_stockyard_price_ib_dt TO wa_zrva_trv_interfa.
>     APPEND wa_zrva_trv_interfa TO i_zrva_trv_interfa.
> *    Modify zrva_trv_interfa FROM WA_zrva_trv_interfa.
>   ENDLOOP .
ENDIF.    "IF NOT it_zxx_stockyard_price_ib_dt is INITIAL.
>
>   IF NOT i_zrva_trv_interfa IS INITIAL.
>     LOOP AT i_zrva_trv_interfa INTO wa_zrva_trv_interfa.
>       MODIFY zrva_trv_interfa FROM wa_zrva_trv_interfa.
>       CLEAR wa_zrva_trv_interfa.
>     ENDLOOP.
>
>   ENDIF.
>
>   FREE i_zrva_trv_interfa.
>
> ENDMETHOD.
>
>
> when execute and debugged i found the values are not showing in internal table i_zrva_trv_interfa (loop at i_zrva_trv_interfa), where i am going wrong?
Regards,
Sarvesh

Data is not showing in Column

Hi experts,
I have two Fact Tables F1 and F2 and both having the join with Dimensions D1,D2.
when i pick the data from D1,D2 and measure from F2 and F1 then the report is runnug fine. but when i pick data from D1,D2 and some character from F2 and measure from F1 . then the column from F1 does not showing any data.
Please suggest.
S

This is expected behaviour from the BI Server. F1 doesn't know how to aggregate over the character column from F2.
There are two solutions.
1) Add an aggregation rule to the character column of F2.
If this is not what you want:
2) Create a logical dimension for the character column of F2. Create a hierarchy for this new dimension. Set the logical level of measure F1 to grand total level of new dimension.

Created By and Created Date fields not showing up on Custom List form webpart

Hi,
I have added Custom Listform WebPart on "DispForm.aspx" of custom list. I need to display, out of box fields "Author" [Created By] and "Created" [Creation Date] on this custom list form webpart, I have added them on the webpart, following is the code behind of aspx page:
<td width ="400px" valign= "top" class="ms-formbody">
<xsl: value-of select = "@Author" disable-output-escaping = "yes"/>
</td>
However these fields are not showing/populating data on the form ?? Any inputs ???
Regards

Hi,
I think that when you insert a custom list form web part you select “Item” content type, so custom list form is designed to display only the fields that are appropriate for that content type “Item”, but the item content type doesn’t contain the created and created by column, when you add the two columns, it will not find the field value. By default, the two columns will display at the foot of the list form using SharePoint:CreatedModifiedInfo.
Hope it can help you.
Xue-Mei Chang

Date data not showing in infocube

Similar Messages

Maybe you are looking for