Date display language

Hi,
I've got a problem on one of G4s at my work. It's the MDD 1.25 version running MacOS 9.2.2 (International English). It was not me to install the software but the original person isn't available at the moment. The problem is I can't change the date display (date modified, date created) in any window - to English. The date is written in Spanish which is uncomfortable for me (there is one excerpt - 'Today' and 'Yesterday' is written in English!). What modification should I do to achieve my desired results? Do I have to put something in the System suitcase? Do I have to remove anything from it? I know sometimes you have to boot from another partition to see all the things in the suitcase. Thanks for your answer in advance.

Oh my! Such simple... Shame on me Thanks Don! I almost exchanged the whole system suitcase from a working G4, scripts, fonts - no! Even calling police wouldn't help

Similar Messages

Multiple Language : Data Display Problem

Hi ,
I have one problem regarding NLS_LANG, please advice.
I have a table on source machine which stores the data in different language (German, Danish, Russian Cyrillic) but these data shows as "???????" on command prompt as well as on Toad when access it from client machine.
I know that displaying any kind of data depends on local NLS_LANG but what NLS_LANG I have to set so that it can display different language together. I am able to display data separately for German, Danish and Russian Cyrillic when I change NLS_LANG and location in client accordingly but unable to display all language together.
Default setting for NLS_LANG on client machine is AMERICAN_AMERICA.WE8MSWIN1252.
Please advise common NLS_LANG for all three language (German, Danish, Russian Cyrillic).
Thanking You

Pl continue the discussion in your original thread for continuity purposes.
Multiple data display problem

Data display grid font selection

Does anyone know how to change the font that's used on the "Data" tab when displaying the content of rows in a table?
I'm trying to view chinese characters which are stored in UTF-8 unicode in the database. I have all the necessary fonts loaded on my machine and the correct NLS_LANG settings.
I can see western characters, arabic, russian, greek OK in the data-grid, but not chinese or other far-eastern languages. Instead I see little squares instead of the symbols.
I've checked for font setting in Tools -> Preferences but the only setting I can find is under the "Code Editor" section. This is set correctly (to Arial Unicode MS) and if I copy the "little squares" from the data grid and paste them into a code-edit tab I see the characters correctly displayed.
So it seems that the "Font" setting for the code-edit tabs isn't used by the data-display tabs.
Is there a way of making both code-editor window and data-display tab use the same font?

i would create a standard report.
i presume the air pressure and humidity are from one field? if not create a formula to display that.
create groups
1- a/p humidity field or formula
2- time
3- ref-measure- error
not sure if they are the same field or different.
you can then place your data in the groups (formulas calcs etc)
then underlay the groups so they appear on the same line
then draw boxes around them.
hope this helps

Server 2012 R2 Display Language?

Hi,
I have a problem to change display language back to default en-US on one of our Windows 2012 R2 servers. It is actually a Domain Controller. During setup the display languages was set to sv-SE.
The server is patched up to date.
When I now try to change to en-US as display language, it says that it is availeble for download, fine. I click download and install, and it installs with no errors.
I go back to language settings, it still says availeble for download.
I have also tried with lpksetup and manually install the lp, but with no success:
And Powershell:
Set-WinUILanguageOverride en-US
Funny thing it says display language en-US:
But as you can see, it is not...
Something I missed here?

Hi affeee,
To provide a full UI, a partially localized language pack includes a base language to localize those parts of the interface that are not localized by a partially localized language
pack.
LIPs are partially localized language packs for emerging or minority language markets where a fully localized version of Windows is not available
Language packs contain the text for the dialog boxes, menu items, and helpfiles that you see in Windows.
For some regions, language interface packs (LIPs) can provide additional translations for the most widely-used dialog boxes, menu items, and helpfile content. LIPs rely on a
parent language pack to provide the remainder of the content. Please refer the following KB to install the language pack and LIP.
Add Language Packs to Windows
https://technet.microsoft.com/en-us/library/hh825699.aspx
Language Packs (lp.cab) and Windows Deployment
https://technet.microsoft.com/en-us/library/hh824829.aspx?f=255&MSPPError=-2147217396
I’m glad to be of help to you!
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Screen Display Language of Material Descriptions in PO vs Output Documents

Greetings Experts,
We have the requirement to display material descriptions in purchase order screens as well as other screens in language dictated by user setting and not the business partner preference. Currently, when we log on as user with English language setting and create purchase order for vendor with a Korean language setting, the material description in the screen is displayed in Korean. So it appears that system ignores the UI preference and displays the material description in the vendor's language/comunication preference. We see this same behavior in other SAP transactions as well. Is there a way for display language for material description to be dictated by user logon preference while retaining ability to output documents that are required in vendor's preferred language?

Hi
The material description will come from the material master record, so whic language you are entering in the material master it automatically pick to the purchasing documents.
If you need material description in different language you can do this in material master itself goto additional data and maintain there.

Where is detailed description of what data binding language can do?

Where in the documentation does it clearly spell out exactly what you can do with
the data binding language (the stuff between "{...}")? I'm trying to understand
what is happening in the SamplesApp, in the "repeaterTag" module, in XMLString.jsp
and repeaterTagController.jpf.
In particular, in XMLString.jsp, it references an expression like this:
<netui-data:repeater dataSource="{pageContext.xml.employee}">
I can't figure out how this is working. I can see that the "callPageFlow" tag
just before this is putting the result of "getXMLStr()" into the "xml" variable.
This string looks like this:
<employees>
<employee title=\"CEO\"><first>Mary</first><last>Smith</last></employee>
<employee title=\"President\"><first>Mark</first><last>Jones</last></employee>
<employee title=\"Vice President\"><first>Matt</first><last>Nelson</last></employee>
<employee title=\"Salesperson\"><first>John</first><last>Doe</last></employee>
<employee title=\"Office Manager\"><first>Jane</first><last>Doe</last></employee>
</employees>
This usage of the data binding language is a little unusual, but I would assume
it's documented somewhere, right?

I had already read that description. It has just about one sentence that covers
the ability to reference elements of an XML string, but without giving any usable
details. I was already convinced that this and direct variable references were
worth avoiding, I just wanted to understand the extent of the available features
first. I guess the lack of any documentation on referencing elements in XML strings
will make it easier to deprecate :) .
Eddie O'Neil <[email protected]> wrote:
David--
A general data binding description is here:
http://edocs.bea.com/workshop/docs81/doc/en/workshop/guide/netui/guide/conDatabindingXScript.html
This help topic describes the NetUI data binding contexts and how
properties / objects are
accessed using them. As far as property binding, a question that came
up in the group earlier,
public properties always win over JavaBean properties, so if you expose
data on any Java object
(page flow, global app, form bean, repeated data item) like this:
::::: Controller.jpf
public String foo = "foo";
private String anotherFoo = "another foo";
public String getFoo()
return anotherFoo;
and bind to this in a JSP:
<netui:label value="{pageFlow.foo}"/>
the value "foo" will display in your page because it is a public property.
The specific example that you mention below is a sample of using the
XScript capabilities in the
8.1 NetUI data binding language to bind directly to parts of an XML document
without having turned
the document itself into a JavaBean.
Frankly, I'd encourage you to use a JavaBean centric approach as we
will likely deprecate this
feature in the future in favor of a more XMLBean / JavaBean centric binding
model. The JavaBean
property binding model is also much more in-line with the JSP 2.0 expression
language.
In the same vein, I'd also suggest following the best practice of
exposing JavaBean properties on
your objects instead of using direct binding to fields.
If you have additional specific questions, feel free to post them
here and we can address them as
they come up.
Hope that helps...
Eddie
David Karr wrote:
Where in the documentation does it clearly spell out exactly what youcan do with
the data binding language (the stuff between "{...}")? I'm tryingto understand
what is happening in the SamplesApp, in the "repeaterTag" module,in XMLString.jsp
and repeaterTagController.jpf.
In particular, in XMLString.jsp, it references an expression like this:
<netui-data:repeater dataSource="{pageContext.xml.employee}">
I can't figure out how this is working. I can see that the "callPageFlow"tag
just before this is putting the result of "getXMLStr()" into the "xml"variable.
This string looks like this:
<employees>
<employee title=\"CEO\"><first>Mary</first><last>Smith</last></employee>
<employee title=\"President\"><first>Mark</first><last>Jones</last></employee>
<employee title=\"Vice President\"><first>Matt</first><last>Nelson</last></employee>
<employee title=\"Salesperson\"><first>John</first><last>Doe</last></employee>
<employee title=\"Office Manager\"><first>Jane</first><last>Doe</last></employee>
</employees>
This usage of the data binding language is a little unusual, but Iwould assume
it's documented somewhere, right?

Change display language of smartform from within the smartform itself

Hi!
The smartform is invoked to display from the standard with some language, which we want to change.
We can't change calling code (because it's standard).
Is it possible to change the displaying language of a smartform from within the smartform. Say, "Initialization" section?

Hi Concern,
We can change language at run time. With following way.
1.    Define a variable and allocate language u want to langu fields.
DATA lV_CT_PARA TYPE SSFCTRLOP.
Here LV_lang contain the language u want to assign.
LV_CT_PARA-LANGU = LV_LANG.
2. Pass it to smart form.
CALL FUNCTION FM_NAME
    EXPORTING
ARCHIVE_INDEX              =
ARCHIVE_INDEX_TAB          =
ARCHIVE_PARAMETERS         =
   CONTROL_PARAMETERS         = LV_CT_PARA
MAIL_APPL_OBJ              =
MAIL_RECIPIENT             =
MAIL_SENDER                =
OUTPUT_OPTIONS             =
USER_SETTINGS              = 'X'
Itu2019s working for me.
Regards
Swati.
Edited by: Swati Namdev on Apr 28, 2010 7:06 PM

Display Language- Russian

I just got a new Blackberry Style and I need to change the display language to Russian. I know you can add languages using the desktop manager but Russian does not appear as an option. I have tried to update and install the latest versions of BlackBerry 6OS but still no Russian support. Does anyone know if this is even possible? And if so where can I download the language pack? Thanks in advance to anyone who knows the answer!

Hi there,
You might need to see if you can find a version of the OS that has multilanguage support. Now then, a quick check of the Sprint BlackBerry download site shows that the Sprint OSes are multilanguage, so try downloading the most up to date OS to your computer, install it, then see if you can add the language files using the BlackBerry Desktop Software after:
https://swdownloads.blackberry.com/Downloads/entry.do?code=FC3CF452D3DA8402BEBB765225CE8C0E
I hope that helps!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Data display on remote cube

Hi Guru's
I've created a generic ds using fm for direct access.creating virtual cube and mapped accordingluy with ds.
Now when I do test extract on ds per a single posting day then it takes few secords to pull through the data and the no. of records are 45 on dev box.But I do data display on remote cub and it takes long and throughing a timed out error.
I dont have any routines on transformaions.
What could be the problem?
Nagesh.

HI
here's the code in FM
Example: DataSource for table SFLIGHT
TABLES: BKPF,BSEG.
Auxiliary Selection criteria structure
DATA: L_S_SELECT TYPE SRSC_S_SELECT.
Maximum number of lines for DB table
STATICS: S_S_IF TYPE SRSC_S_IF_SIMPLE,
counter
          S_COUNTER_DATAPAKID LIKE SY-TABIX,
Starting point for each data package
         READ_NEXT LIKE SY-TABIX,
Total Number of Extracted Records
         NO_RECS LIKE SY-TABIX,
Number read so far
         TEMP_CNTR(9) TYPE N.
cursor
S_CURSOR TYPE CURSOR.
Select ranges
RANGES: R_BLDAT FOR BKPF-BLDAT,
          R_BUDAT FOR BKPF-BUDAT,
          R_CPUDT FOR BKPF-CPUDT,
          R_BUKRS FOR BKPF-BUKRS,
          R_GJAHR FOR BKPF-GJAHR,
          R_BELNR FOR BKPF-BELNR.
DATA: GT_T_DATA LIKE ZFI_GL_4 OCCURS 0 WITH HEADER LINE.
DATA: GT_BKPF TYPE TABLE OF BKPF,
        GS_BKPF TYPE BKPF.
DATA: COUNTER(9) TYPE N.
DATA: LV_MONAT(3).
Initialization mode (first call by SAPI) or data transfer mode
(following calls) ?
IF I_INITFLAG = SBIWA_C_FLAG_ON.
Initialization: check input parameters
                buffer input parameters
                prepare data selection
Check DataSource validity
    CASE I_DSOURCE.
      WHEN 'ZFI_GL_4'.
      WHEN OTHERS.
        IF 1 = 2. MESSAGE E009(R3). ENDIF.
this is a typical log call. Please write every error message like this
        LOG_WRITE 'E'                  "message type
                  'R3'                 "message class
                  '009'                "message number
                  I_DSOURCE   "message variable 1
                  ' '.                 "message variable 2
        RAISE ERROR_PASSED_TO_MESS_HANDLER.
    ENDCASE.
    APPEND LINES OF I_T_SELECT TO S_S_IF-T_SELECT.
Fill parameter buffer for data extraction calls
    S_S_IF-REQUNR    = I_REQUNR.
    S_S_IF-DSOURCE = I_DSOURCE.
    S_S_IF-MAXSIZE   = I_MAXSIZE.
Fill field list table for an optimized select statement
(in case that there is no 1:1 relation between InfoSource fields
and database table fields this may be far from beeing trivial)
    APPEND LINES OF I_T_FIELDS TO S_S_IF-T_FIELDS.
ELSE.                 "Initialization mode or data extraction ?
Data transfer: First Call      OPEN CURSOR + FETCH
               Following Calls FETCH only
First data package -> OPEN CURSOR
    IF S_COUNTER_DATAPAKID = 0.
Fill range tables BW will only pass down simple selection criteria
of the type SIGN = 'I' and OPTION = 'EQ' or OPTION = 'BT'.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BLDAT'.
        MOVE-CORRESPONDING L_S_SELECT TO r_bldat.
        APPEND R_BLDAT.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUDAT'.
        MOVE-CORRESPONDING L_S_SELECT TO R_BUDAT.
        APPEND R_BUDAT.
      ENDLOOP.
      LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'CPUDT'.
        MOVE-CORRESPONDING L_S_SELECT TO R_CPUDT.
        APPEND R_CPUDT.
      ENDLOOP.
         LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BUKRS'.
        MOVE-CORRESPONDING L_S_SELECT TO R_BUKRS.
        APPEND R_BUKRS.
      ENDLOOP.
         LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'GJAHR'.
        MOVE-CORRESPONDING L_S_SELECT TO R_GJAHR.
        APPEND R_GJAHR.
      ENDLOOP.
          LOOP AT S_S_IF-T_SELECT INTO L_S_SELECT WHERE FIELDNM = 'BELNR'.
        MOVE-CORRESPONDING L_S_SELECT TO R_BELNR.
        APPEND R_BELNR.
      ENDLOOP.
Determine number of database records to be read per FETCH statement
from input parameter I_MAXSIZE. If there is a one to one relation
between DataSource table lines and database entries, this is trivial.
In other cases, it may be impossible and some estimated value has to
be determined.
      SELECT * FROM BKPF INTO TABLE GT_BKPF WHERE BLDAT IN R_BLDAT
                                              AND BUDAT IN R_BUDAT
                                              AND CPUDT IN R_CPUDT
                                              AND BUKRS IN R_BUKRS
                                              AND GJAHR IN R_GJAHR
                                              AND BELNR IN R_BELNR.
      LOOP AT GT_BKPF INTO GS_BKPF.
        SELECT * FROM BSEG WHERE BELNR = GS_BKPF-BELNR
                           AND   BUKRS = GS_BKPF-BUKRS
                           AND   GJAHR = GS_BKPF-GJAHR.
          MOVE-CORRESPONDING GS_BKPF TO GT_T_DATA.
          MOVE-CORRESPONDING BSEG TO GT_T_DATA.
          CLEAR LV_MONAT.
          CONCATENATE '0' GT_T_DATA-MONAT INTO LV_MONAT.
          CONCATENATE GT_T_DATA-GJAHR LV_MONAT INTO GT_T_DATA-FISCPER.
          CALL FUNCTION 'BWFIU_GET_DOCUMENT_ORIGIN'
            EXPORTING
              I_AWTYP    = GT_T_DATA-AWTYP
              I_AWKEY    = GT_T_DATA-AWKEY
            IMPORTING
              E_REFBELNR = GT_T_DATA-AWREF
              E_REFGJAHR = GT_T_DATA-AWGJA
              E_REFBUKRS = GT_T_DATA-AWBUK
              E_REFKOKRS = GT_T_DATA-AWKOK.
Lcal currency calculations.
          IF GT_T_DATA-SHKZG EQ 'S'.
            GT_T_DATA-DMSOL = GT_T_DATA-DMBTR.
            GT_T_DATA-DMSHB = GT_T_DATA-DMBTR.
            GT_T_DATA-DMHAB = 0.
          ELSEIF GT_T_DATA-SHKZG EQ 'H'.
            GT_T_DATA-DMHAB = GT_T_DATA-DMBTR.
            GT_T_DATA-DMSHB = GT_T_DATA-DMBTR * -1.
            GT_T_DATA-DMSOL = 0.
          ENDIF.
Foriegn Currency calculations.
          IF GT_T_DATA-SHKZG EQ 'S'.
            GT_T_DATA-WRSOL = GT_T_DATA-DMBTR.
            GT_T_DATA-WRSHB = GT_T_DATA-DMBTR.
            GT_T_DATA-WRHAB = 0.
          ELSEIF GT_T_DATA-SHKZG EQ 'H'.
            GT_T_DATA-WRHAB = GT_T_DATA-DMBTR.
            GT_T_DATA-WRSHB = GT_T_DATA-DMBTR * -1.
            GT_T_DATA-WRSOL = 0.
          ENDIF.
          APPEND GT_T_DATA.
        ENDSELECT.
      ENDLOOP.
      DESCRIBE TABLE GT_T_DATA LINES NO_RECS.
      READ_NEXT = 0.
      TEMP_CNTR = 0.
    ENDIF.                             "First data package ?
Fetch records into interface table.
    IF ( READ_NEXT GT NO_RECS ) OR ( NO_RECS EQ 0 ).
      REFRESH GT_T_DATA.
      CLEAR:S_COUNTER_DATAPAKID, COUNTER, READ_NEXT, S_S_IF, NO_RECS.
      RAISE NO_MORE_DATA.
    ENDIF.
    COUNTER = 0.
    LOOP AT GT_T_DATA FROM READ_NEXT.
      COUNTER = COUNTER + 1.
      IF COUNTER GT S_S_IF-MAXSIZE.
        IF TEMP_CNTR EQ NO_RECS.
          CLEAR: S_COUNTER_DATAPAKID,COUNTER,READ_NEXT,S_S_IF,NO_RECS.
          RAISE NO_MORE_DATA.
        ELSE.
          READ_NEXT = READ_NEXT + COUNTER.
        ENDIF.
        EXIT.
      ENDIF.
      MOVE-CORRESPONDING GT_T_DATA TO E_T_DATA.
      APPEND E_T_DATA.
      TEMP_CNTR = TEMP_CNTR + 1.
      iF TEMP_CNTR GT NO_RECS.
        CLEAR GT_T_DATA.
        CLEAR: S_COUNTER_DATAPAKID, COUNTER,READ_NEXT, S_S_IF,NO_RECS.
        RAISE NO_MORE_DATA.
        EXIT.
      ENDIF.
    ENDLOOP.
    S_COUNTER_DATAPAKID = S_COUNTER_DATAPAKID + 1.
ENDIF.              "Initialization mode or data extraction ?
ENDFUNCTION.
If it's a code then why it's quick on rsa3?
Nagesh.

Feature Request: Better dimensional meta data displayed

Aside from every other problem with how Bridge lets the user display, sort and interact with meta data (aside from the actual metadata palette), it would be way more useful to have the Dimension meta data displayed under an image shown in 'real world' dimensions.
For example: I'm looking at my 'final images' that have been converted to CMYK, and sized for delivery. At this point Pixel Dimensions are pretty useless. What I really want to do is quickly scan my images, seeing Inches (or CM) with a PPI. My clients never ask for pixel dimensions (unless we are talking about the web, which we aren't) - they ask for 8.76" x 5.34" at 266ppi. It would just be nice to use bridge to double check the image sizes before delivery.
thks
andy

Thanks for you feedback. You wish has been granted (dimensions can now be displayed in pixels, inches or centimeters. Go to Preferences > Thumbnails to select which dimension to display below the thumbnail, or Preferences > Metadata to customize the metadata pane). Check out the free beta of Bridge CS3 (http://labs.adobe.com/technologies/photoshopcs3/)
Cheers,
Arno.
Bridge Engineering Manager, Adobe.

I can't change the display language on my HP Color LaserJet CP1518ni

I have a HP Color LaserJet CP1518ni printer that I inherited from an employee who is no longer at the company. The display screen on the printer is not showing in English, it's in some language I do not recognize (and neither does anyone else). I want to change the display language to English but the manual only shows you how to do that on the display, which I cannot read because it's not in English, hence my dilemma. Does anyone know of a way to change the display language through the computer?
Thanks

InventoryLady,
Yes that is what I did. I do not know the language that it is currently set at, so the recommendations were from using the front panel menu. The OK button is the OK button on the front panel, that would not be in another language, it is the button in between the left and right arrow- See image below #6:
Once you have hit the OK button, you can complete the steps in my earlier recommendation. Again because I do not know which language it is currently set at, I am guiding you the best I can. As for selecting the English language, I suggest using Google Translate to find out which language it is currently set at and see what their word for English is.
If you have any more questions, please let me know.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

How to fetch the data & display the data if fields got the same name in alv

hi frnds, i need ur help.
how to fetch the data & display the data if fields got the same name in alv grid format.
thanks in advance,
Regards,
mahesh
9321043028

Refer the url :
http://abapexpert.blogspot.com/2007/07/sap-list-viewer-alv.html
Go thru the guide for OOPs based ALV.
Use SET_TABLE_FOR_FIRST_DISPLAY to display the table:
CALL METHOD grid->set_table_for_first_display
EXPORTING
I_STRUCTURE_NAME = 'SFLIGHT' Structure data
CHANGING
IT_OUTTAB = gt_sflight. Output table
You can also implement
Full Screen ALV, its quite easy. Just pass the output table to FM REUSE_ALV_GRID_DISPLAY.
For controlling and implementing the FS-ALV we have to concentrate on few of the components as follows :
1. Selection of data.
2. Prepare Layout of display list.
3. Event handling.
4. Export all the prepared data to REUSE_ALV_GRID_DISPLAY.
Regd,
Vishal

IPhoto 6 - Date Display Bug?

I've gone ahead and upgraded to iPhoto 6. Upon first launch, it asked to update the files which I did.
The new file hierarchy issues aside (Original/Year/Roll drives me nuts), I've noticed that while the calendar shows the correct pictures of the day selected, the Roll name is generic ("Roll 567", etc.) and the date of the roll is not correct.
For example, a roll taken on December 25, 2005 should have the date of 31/12/05 (or perhaps 12/31/05) but I'm seeing "12/05/05" and when I get info on a pic in that roll, the date taken is shown as "12/2005/2005".
I've deleted the plist but not sure what else I can try.

Figured out that the "corrupt" date display is due to custom format display settings for Date in the International preference pane. Set that back to standard and the photos are back to normal.

Video Playback in synchronization to data display

I've read a bunch of topics about recording live video, but my question has to do with playback synchronized to a data display. I've got a simple black and white camera (RS170) already. I'm going to get some sort of capture board. I want to record video from this camera to the hard drive. The reason is that this video file needs to be analyzed later so I need to store it on disk instead of memory as it could be days later. While I'm recording video, another signal needs to be recorded. It could be anything really, let us say temperature for discussion. Assume everything is in place for this temp. acquisition.
Recording video to disk doesn't seem to be any problem. My question relates to playing this video back such that when you play it, you can also look at a data display of the recorded temperatures that happened at the same time as the video was recorded. If you were to drag the video slider manually (instead of just pressing play), the data display would also update accordingly. This essentially syncs the data display of temperature with the video picture you are seeing. Pressing play and just watching the video, the temp data would update itself with the correct historical values. Pressing pause on the video, would of course freeze the temp display to the value at that time. Wherever the video is, the temp data would have to display the correct historical value.
I would need to record possibly a few hours of video a day so disk space could be an issue if using uncompressed AVI format. I wouldn't have to save every days video file so I could eventually delete a bunch of the files. I'd just save the days video that produces interesting results to examine later. A number of video files might build up (a months worth?) before the directory is examined for possible deletes. I'd like some feedback on this too from someone who has tried uncompressed AVI versus something else that is compressed. Is performance OK if using compression?
The computer I'd be running this on is the latest workstation class machine from HP so it is a fairly powerful computer.
Is there any sample code of doing this video playback indexing to data signal display? I'm thinking there would have to be some function to know where the video is playing at all times and then historically retrieve the temperature data. Is there performance issues with this? I'd want it fairly accurate such that the smallest increment of a video frame (say 30 times a second) produced a proper data display for temperature. In reality, my signal will change faster than a typical temperature value would.

I doubt this will satisfy 100% of what you're looking for, but it should at least get the conversation started on developing some techniques we can use to syncronize acquired data playback (again, let's say temperature) with some external source. I don't know much about video playback, so I won't be able to help you much there, but I do know a lot about leveraging LabVIEW technology to play back data in real-time as best possible, while allowing the user (or the video playback itself) to dictate a specific position at any time, pause, etc...
My first recommendation would be to save your acquired temperature data as a Waveform. Waveform is more or less like a cluster with three elements: a 1D array of Y-values, an intial time (t0), and the time between samples (dt). You can use these three pieces of information to reconstitute when each sample was acquired and what the timing should be configured for to play these samples back in real time. Search the web for information on writing Waveforms to file and reading them. You should find plenty there (or post somewhere else ).
After that, we can use a Timed Loop for playback. Timed Loops allow you to set a desired Loop period. They also have a lot of other capabilities, such as setting priorities, handling the fact that your last loop didn't finish on time, etc. Here's a link with more info on Timed Loops. Other than that, Timed Loops can operate like regular while loops.
My next idea is to incorporate a current position that we keep track of. This could be, for instance, the index of the current element in the 1D Y-values array. If you want this to involve user interaction with the front panel (for instance, changing a Slider value to reflect the playback position), then you could use an event structure with a timeout case set to zero. Then update the temperature value and increment the current position in the timeout case.
You might take a look at the example I've written in LabVIEW 7.1 that "acquires" 5 seconds of sine wave data and plays it back in real time. The user can adjust the position or pause the playback at any time. Again, I don't know exactly how this would interface with video feedback. If you have more specifics about what method you will use to playback the video, maybe someone with more expertise in this area could help us out.
Jarrod S.
National Instruments
Attachments:
Signal_Playback_Realtime.vi ‏223 KB

Script to automate the display language on windows server

Hi,
I'm looking for a script which should change the windows display language from non-english to english (vizversa).
Here is the scenario:
On windows server 2008 R2 I have two language installed - Japanese and English with the help of MUI packs available on microsoft site. The native language of windows server 2008 R2 is Japanese. Consider there are 10 sys admins only knows
Japanese but not english. Similarly there are 10 sys admins knowing only English. I being english administrator, i should each time go to regional setting in the control panel and click on change display language to english. After
I finish my task I need to set back the language to japanese(native).
I'm looking for script which can auotmate this process.
Objective:
The script should automatical change the language to Japanese when I logoff from the system.
Here is the steps to reach "Change Display language" on windows server 2008
Go to control Panel > Category view (on right side top ) > System and Security > Clock ,Language and Region > Under “Regional Language” > Change display
language > Go to Tab “Keyboards and Languages” > Look for the dropdown menu “Choose a display language” and choose the appropriate language you prefer from the dropdown list
Kindly note this menu/option is available for Vista,Windows 7 and Windows Server 2008. This option is also available on Windows XP/Server 2000/2003 provided the LIP/MUI is installed.
Thanks
Ezakial

Hi,
I'm looking for a script which should change the windows display language from non-english to english (vizversa).
Here is the scenario:
On windows server 2008 R2 I have two language installed - Japanese and English...
Thanks
Ezakial
Guys,
Forgive me, but I think you are making this far too complicated. Using a script to achieve this is, in my view the wrong tool, and a little dangerous. If your logoff script fails to run for any reason, 11 Japanese sysadmins will be waving Samurai swords
at you :-).
There is a single Group Policy setting that will do exactly what you want on Vista, W7, W2K8 & R2.
Create a new Group Policy object ("English_interface", for example.
Edit the new policy object
Drill down to "User Configuration, Policies, Administrative Templates, Control Panel, Regional and Language Options"
Pick the setting "Restricts the UI languages Windows should use for the selected user" and Enable it.
Drop down the "Restrict users to the following language" and pick "English"
Click "OK"
Link your new GPO somewhere in the OU hierarchy that contains the English user
If other (Japanese?) users are also in the same container, you can filter application of the GPO by security group so that the policy can only be read and applied by the English group.
That's all you need to do!
As a point of principle. I ALWAYS install my OS in US English then add languages, and set the locals to use their own language. This is because service packs and hotfixes invariably arrive for US English first, and some hot fixes are NEVER translated.
I'm just doing this for a single W7 build in English, to be deployed in 6 countries, with 7 different languages and 9 different keyboard layouts. Fun...
Come back if you need more help. I volunteer to visit and help if you want!
Richard
MCSE, MCITP, MCT etc.
Switzerland
RS

Date display language

Similar Messages

Maybe you are looking for