Date error while scheduling infopackage
Hello Friends
I am facing a pecular problem.
Some time back we had taken a backup from production to quality system. I have loaded the data with the option "initialization without data transfer". It is successful. After that we are loading deltas and in this time it is showing errors such as
1) selection condition replaced by last init selection conditions.
2) incorrect start date 20.09.2004 start time 02:10:00
what am i suppose to do in this case?
Need ur valuable suggestions.
Regards
rohit
Hi
From which data sources are you loading data..I think it is from some copa related time stamp problem..Please bit eloborate on this issue
Thanks
Teja
Similar Messages
-
BI4.1 SP3 unparseable date error while scheduling
Hi,
We currently updated BI4.0 sp4 to BI4.1 sp3 on our test environment.
Im getting "Unparseable date" error only with scheduling on reports with a date prompt on BI4.1 SP3. On refreshing reports with date prompts without error.
The same report with date prompt scheduled on BI4.0 SP4 version. It schedules without error.
Could anyone help on this.
Thanks,
YouqinHi,
looks a little bit like this:
http://service.sap.com/sap/support/notes/1981477
Maybe you should open an Incident with the SAP Support to take a closer look into the issue and maybe to confirm that this is the Bug from above.
Regards
-Seb. -
Error while Scheduling InfoPackage
When i am scheduling a full load in the infopackage to load data to PSA but am getting an DBIF_RSQL_INVALID_REQUEST error. The desciption is "An invalid request was made to the SAP database interface in a statement in which the table "EDID4 " was accessed".
Can anyone help me overcome this and resolve the issue, please.
Thanks
Nehacheck OSS Note 89384 if it is relevant to ur issue.
-
Error while creating INFOPACKAGE to load transaction data
Hi,
I am getting the following error while creating infopackage:
"Error in Conversion exit CONVERSION_EXIT_CUNIT_INPUT"
I am getting this error when I click on the Start button under the schedule tab in the screen Administrator Workbench: Modelling.
I clicked on Monitor icon to view the diagnosis. The diagnosis is mentioned below:
the screen is Performance Assistant Window and the diagnosis message appears in italics.
<i>Message No RSAR137
DIAGNOSIS
An error occurred in record 1 during execution of conversion exit CONVERSION_EXIT_CUNIT_INPUT for field UNIT.
Procedure
Check that the record where error occurred has the correct format and correct it accordingly. </i>
Please note that I have succesfully created update rules as I didn't get any error.
Also I would like some one to explain me clearly the differences between transfer rules and update rules with a clear explanation please.
Please help me.
Thank you.
Tristan.Hello Tristan,
I was used to get the same kind of problems before.
I got the problem with the data source type-Flat File (.csv)
One solution that I have done:
1) checked the particular record in which the error message refer to
2) tested the particular unit from the transaction se37
Function Module = CONVERSION_EXIT_CUNIT_INPUT
Press F8 in order to execute
This would be help a bit
3) corrected data from the flat file
another alternative solution was by:
handling the data using routine in the transfer rules
For my case, before executing the InfoPackage, data from flat file could be previewed. At this point, I could check which records caused the problems.
I'm not sure about your case whether data came from which type of data source.
That's all I could share for now.
-WJ- -
Error while Scheduling Full DB back up?
Hi gurus,
I got error while schedule full DB back up. I am follow all the steps.but i got this error.
1. go to DB13
2. select Day
3.select full DB backup
4.select time
5.select sid, msdb,inttape,verify backup
5.add.
our DB is MS-SQL server Data Base
client :222 user: admin
error: User not connected
2008-04-10 14:28:06.89 Server Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
Apr 14 2006 01:12:25
Copyright (c) 1988-2005 Microsoft Corporation
Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2008-04-10 14:28:06.89 Server (c) 2005 Microsoft Corporation.
2008-04-10 14:28:06.89 Server All rights reserved.
2008-04-10 14:28:06.89 Server Server process ID is 308.
2008-04-10 14:28:06.89 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2008-04-10 14:28:06.89 Server This instance of SQL Server last reported using a process ID of 308 at 4/10/2008 2:24:10 PM (local) 4/10/2008 8:54:10 AM (UTC). This is an informational message only; no user action is required.
2008-04-10 14:28:06.89 Server Registry startup parameters:
2008-04-10 14:28:06.89 Server -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2008-04-10 14:28:06.89 Server -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2008-04-10 14:28:06.89 Server -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2008-04-10 14:28:06.90 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2008-04-10 14:28:06.90 Server Detected 8 CPUs. This is an informational message; no user action is required.
2008-04-10 14:28:07.06 Server Set AWE Enabled to 1 in the configuration parameters to allow use of more memory.
2008-04-10 14:28:07.20 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2008-04-10 14:28:07.21 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-04-10 14:28:18.89 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-04-10 14:28:18.89 Server Database mirroring has been enabled on this instance of SQL Server.
2008-04-10 14:28:18.89 spid4s Starting up database 'master'.
2008-04-10 14:28:18.96 spid4s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2008-04-10 14:28:19.00 spid4s SQL Trace ID 1 was started by login "sa".
2008-04-10 14:28:19.01 spid4s Starting up database 'mssqlsystemresource'.
2008-04-10 14:28:19.04 spid4s The resource database build version is 9.00.2047. This is an informational message only. No user action is required.
2008-04-10 14:28:19.18 spid4s Server name is 'ERPPRD'. This is an informational message only. No user action is required.
2008-04-10 14:28:19.18 spid9s Starting up database 'model'.
2008-04-10 14:28:19.29 spid9s Clearing tempdb database.
2008-04-10 14:28:19.37 spid9s Starting up database 'tempdb'.
2008-04-10 14:28:19.39 spid9s Analysis of database 'tempdb' (2) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:19.40 spid12s The Service Broker protocol transport is disabled or not configured.
2008-04-10 14:28:19.40 spid12s The Database Mirroring protocol transport is disabled or not configured.
2008-04-10 14:28:19.40 spid12s Service Broker manager has started.
2008-04-10 14:28:19.42 Server A self-generated certificate was successfully loaded for encryption.
2008-04-10 14:28:19.43 Server Server is listening on [ 'any' <ipv4> 1433].
2008-04-10 14:28:19.43 Server Server local connection provider is ready to accept connection on [
.\pipe\SQLLocal\MSSQLSERVER ].
2008-04-10 14:28:19.43 Server Server named pipe provider is ready to accept connection on [
.\pipe\sql\query ].
2008-04-10 14:28:19.43 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2008-04-10 14:28:19.43 Server Dedicated admin connection support was established for listening locally on port 1434.
2008-04-10 14:28:19.43 Server The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2008-04-10 14:28:19.43 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2008-04-10 14:28:19.48 spid21s Starting up database 'msdb'.
2008-04-10 14:28:19.48 spid23s Starting up database 'SRM'.
2008-04-10 14:28:19.48 spid22s Starting up database 'PRD'.
2008-04-10 14:28:20.29 spid23s Analysis of database 'SRM' (6) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:23.40 spid22s Analysis of database 'PRD' (5) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:23.95 spid4s Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2008-04-10 14:28:23.95 spid4s Recovery is complete. This is an informational message only. No user action is required.
2008-04-10 14:28:26.37 spid51 Using 'xpsqlbot.dll' version '2005.90.2047' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
2008-04-10 14:28:26.53 spid51 Using 'xpstar90.dll' version '2005.90.2047' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2008-04-10 14:28:26.57 spid51 Using 'xplog70.dll' version '2005.90.2047' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
2008-04-11 00:00:56.75 spid17s This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
2008-04-11 16:44:23.89 spid112 DBCC CHECKDB (PRD) started at Apr 11 2008 4:44PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 16:52:47.53 spid107 DBCC CHECKDB (PRD) started at Apr 11 2008 4:52PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 17:00:01.48 spid115 DBCC TRACEON 3605, server process ID (SPID) 115. This is an informational message only; no user action is required.
2008-04-11 17:00:10.45 spid115 Error: 18204, Severity: 16, State: 1.
2008-04-11 17:00:10.45 spid115 BackupTapeFile::OpenMedia: Backup device '
.\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
2008-04-11 17:00:10.67 Backup Unnamed tape was dismounted from drive 'R3DUMP1(
.\tape1)'. This is an informational message. No user action is required.
2008-04-11 17:00:10.65 Backup Error: 3041, Severity: 16, State: 1.
2008-04-11 17:00:10.65 Backup BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
2008-04-11 17:00:11.18 Backup Tape 'Media created 3/29/2007 at 2:43 PM' was dismounted from drive 'R3DUMP0(
.\tape0)'. This is an informational message. No user action is required.
2008-04-11 17:00:15.54 spid101 DBCC TRACEON 3605, server process ID (SPID) 101. This is an informational message only; no user action is required.
2008-04-11 17:00:15.60 spid101 Error: 18204, Severity: 16, State: 1.
2008-04-11 17:00:15.60 spid101 BackupTapeFile::OpenMedia: Backup device '
.\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
2008-04-11 17:00:15.60 Backup Unnamed tape was dismounted from drive 'R3DUMP1(
.\tape1)'. This is an informational message. No user action is required.
2008-04-11 17:00:15.60 Backup Error: 3041, Severity: 16, State: 1.
2008-04-11 17:00:15.60 Backup BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
2008-04-11 17:00:15.60 Backup Unnamed tape was dismounted from drive 'R3DUMP0(
.\tape0)'. This is an informational message. No user action is required.
2008-04-11 17:02:57.57 spid114 DBCC CHECKDB (PRD) started at Apr 11 2008 5:02PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 18:30:37.75 spid112 DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 46 minutes 14 seconds.
2008-04-11 18:54:52.10 spid114 DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 51 minutes 55 seconds.
2008-04-11 18:55:25.00 spid107 DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 2 hours 2 minutes 38 seconds.
2008-04-12 00:00:30.75 spid17s This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
This is error
anybody help me.
Regards,
balaram
Edited by: balaram reddy on Apr 14, 2008 8:44 PMIf your ECC6 is on SP12 and above, use t-code : DBACOCKPIT or DB13OLD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0dc0752-2502-2a10-2a93-94823467ca79 -
Error while scheduling through web service
We have created Web service through WSDL of OBI Publisher. Also we created a web service proxy client to call the services offered by OBI Publisher. We actually want to "Automate the Scheduling of Reports" according to our requirement:
1. We used to schedule the reports manually by giving the parameters(used to populate data in reports) and other fields like select report name, report destination, format of reports ( .pdf, .docx,etc) through Oracle BI Publisher.
2. As there are thousands of permutations of report input parameters possible, so it is difficult to schedule them manually.
3.We also want to schedule report to a particular folder according to some parameter, for the ease of the user visibility.
Above requirements are not currently available with Oracle BI Publisher.
We are getting error while scheduling through ScheduleRequest class.
The client.java is as follows:
public class ScheduleServiceClient
@WebServiceRef
private static ScheduleService_Service scheduleService_Service;
public static void main(String [] args)
scheduleService_Service = new ScheduleService_Service();
ScheduleService scheduleService = scheduleService_Service.getScheduleService();
// Add your code to call the desired methods.
try {
FTPDeliveryOption ftpdo =new FTPDeliveryOption();
ftpdo.setFtpServerName("ServerName");
ftpdo.setFtpUserName("Username");
ftpdo.setFtpUserPassword("Password");
ftpdo.setRemoteFile("/path/TestFile");
ftpdo.setSftpOption(true);
List<FTPDeliveryOption> listobj=new ArrayList<FTPDeliveryOption>();
listobj.add(ftpdo);
ArrayOfFTPDeliveryOption ar =new ArrayOfFTPDeliveryOption();
ar.setItem(listobj);
DeliveryChannels dc = new DeliveryChannels();
dc.setFtpOptions(ar);
ScheduleRequest scheduleRequest = new ScheduleRequest();
scheduleRequest.setDeliveryChannels(dc);
scheduleRequest.setJobLocale("en-US");
scheduleRequest.setUserJobName("Job_1_WebService");
scheduleRequest.setDataModelUrl("Url");
scheduleRequest.setStartDate("Mar 27, 2015 12:40:00 PM");
scheduleRequest.setJobTZ("[GMT+05:30] Calcutta, Chennai, Mumbai, New Delhi");
String userID = "BI_Publisher_Username";
String password = "BI_Publisher_Password";
scheduleService.scheduleReport(scheduleRequest,userID,password);
} catch(Exception exception) {
exception.printStackTrace();
Snapshot of error is attached.
Kindly suggest the way of getting out of this error.Hi
Check this thread
WD Message Manager
Reward opints if usefull.... -
Short dump while scheduling infopackage
Hi,
im getting short dump while scheduling infopackage for( 0cfm_init_positions )as it is giving dump like MESSAGE_TYPE_X runtime error in BI test system but in dev it's working fine if anybody knows how to resolve??.hi
this is due to existence of TRFC-Packages for old failed requests in the source system.
so for this QM-Action in the request monitor change manually to red.
if you wont find the solution contact basis team.
or
use SE16. Look at RSSDLINIT table. Match up the LOGSYS with your OLTPSOURCE (for the infopackage that is causing the problem). Delete that line(s) Now you can open the infopackage. (be sure to delete the initialization) before you run the info pack again.)
Also you can check SAP Note : 852443
check this links
Short dump MESSAGE_TYPE_X while trying to open infopackage
DUMP IS COMMING WHILE CREATING INFOPACKAGE -
Error While sending infopackages from OLTP to BI/urgent
Hi BW friends
im workin on production support and im new to it.while
running infopackage X ,it is throwing a error
error:While sending infopackages from OLTP to BI/urgent
In status tab it shows traingular yellow colour
and diagnosis says that No idocs could be sent to bi using rfc.
so if u know please reply me
Thank you
Amarnath kwhile loading data into the target we got this message and the solution is do manual update for that.
-
Error while scheduling VerifyDB in DB13
Hi,
I am facing an error while scheduling VerifyDB through DB13 in my SAP ECC 6.0 system. This problem is occuring in the entire landscape(Dev, Quality & Prod) after i did an oracle upgrade from 10.1.0.4 to 10.2.0.2. The error is as below:
BR1301W Error message from likeywlib:
===...could not load SSF library libsapsecu.so .
BR1301W Error message from likeywlib: likey_init: Couldn't load SAPSECULIB ("libsapsecu.so") using function SsfSupInit (), rc = 10.
BR1302E Initialization of license key library likeywlib failed, return code 1
BR0602E No valid SAP license found - please contact SAP
I also checked the note 912969 which gives the below solution:
The error is corrected in BRSPACE 7.00 patch 10
But the BRSPACE is already on a higher patchset (18). Patch 10 is already applied.
Can somebody please guide me on this.
Thanks & Regards,
SmithaHi Andreas,
the error is exactly the same.
The database is Oracle 10.2.0.2 and the backup is performed with a mix of BRtools and Legato.
Any idea?
Thanks
Gianluca -
RWI 00200 Error while scheduling the Bex Query based Webi report
Dear All,
I am facing the below error while scheduling the Bex Query based Webi report.
Error:RWI 00200
We are using BO XI 4.0 Sp05.
Please adviseHi,
I am on BO 4.0 SP05 Patch 6. Webi reports are just showing processing but not giving results. When I try to create new report it is throwing java security error.
Tried applet patch upgrade(From link : https://websmp207.sap-ag.de/~sapidb/011000358700000902752013E) for webi certificate but didn't help.
Please suggest what could be done.
Thanks and Regards,
Ankit Sharma -
INVALID_QUEUE_NAME : Error while scheduling message using qRFC
Hello SDNers
We are currently performing our PI 7.1 upgrade and one of our scenario uses a Sender SOAP of the type EOIO. We tried executing this scenario in PI 7.1 XID environment and in it worked fine without any errors but in our PI 7.1 QA environment it is giving the following errors
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Message Split According to Receiver List
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SCHEDULE_ERROR</SAP:Code>
<SAP:P1>XBQOC___*</SAP:P1>
<SAP:P2>INVALID_QUEUE_NAME</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while scheduling message using qRFC (queue name = XBQOC___*, exception = INVALID_QUEUE_NAME)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can you please exaplian what could be the issue we are facing.
Thanks.
Kiran
Edited by: Kiran Sakhardande on Oct 22, 2008 4:08 PMHI Kiran,
Have gone throgh the following link?
INVALID_QUEUE_NAME
Regards
Sridhar Goli -
Buffer Table not up to date error while accessing Catalogs
Hello,
I am getting Buffer table not up-to-date error while accessing ARIBA Procurement Catalogs.
Initially, my Test system was pointing to Production Catalogs but now, when I changed the settings in "Define External Web Services" and pointed it to DEV Catalogs, it is failing with error: "Buffer Table not up-to-Date"
Refreshed the Buffer already but still error not fixed.
We already have the similar settings in other systems and there the connections are working fine
Please advise
Regards
Manish AgrawalHi Manish,
Could you please check the below notes and implement the same since I had the same issue upon punching out from the catalog to SRM system.
2041631 - Simplified Shopping Cart:Dump on Check Out From Catalog
2086844 - Dump "Buffer table not up-to-date" on Check Out from Catalog
In addition to the above, please maintain the portal information in the path as shown in the below screen shot
Kindly check and let me know on how it goes.
Best Regards,
Bharathi -
Error while scheduling data in QA
Hi Experts,
I am having this problem while Scheduling data in QA. I tried activating Infosource in se38 with program rs_transtru_activate_all but still i am getting the below error, can anyone let me know why is this happening....
Diagnosis
DataSource ZFAB_BILLINGCALC does not have the same status as the source
system in the Business Information Warehouse.
The time stamp in the source system is 10/06/2006 09:33:40 .
The time stamp in the BW system is 08/09/2006 15:52:25 .
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that
belong to it. You have to activate the transfer rules in every case,
even if they are still active after the DataSource has been copied.Kris,
I also got the similar error (time stamp)
Try this.
Replicate data source
Activate transfer structure in source system. For this
you navigate from source system tab---> your data source --> context menu --> display data source in source and then come back. It will activate the transfer structure in source. ( I dont know exact procedure but this worked for me many times)
I think this is sufficient.
If this not works include this step also Use the program for activating transfer structure in BW.
Hope this helps.
Vijay -
Error while scheduling Background Job for User/Role Full Synchronization
Hi all,
We have installed RAR 5.3 Component and uploaded the authorization data & established the connectors to the backend system.
We have performed all the post installation activities and everything is complete.
When we have scheduled User -Full Synchronization with the Back End system as a part of Post Installation Activity we are receiving the below error message
"Error while executing the Job:Cannot assign an empty string to host variable 2."
Also the VIEW LOG/ Terminate Job buttons are disabled in this screen.
Can somebody please help us in resolving the above issue
Thanks and Best Regards,
Srihari.KHi,
We are copy pasting the error log (Part as it is huge) below here. We could able to do Full Synch for Roles and also for Profiles. Only for User Synch we are getting this error and none of the users are sychronized to RAR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WILSONA of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WINDC of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WLADICHJ of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user WUK of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user ZENGS of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: Update user ZHENGL of HL2-QAHR
Jan 13, 2009 12:34:27 AM com.virsa.cscext.dao.CSCDAO populateGenObjUser
INFO: All System Flag:false=====Last Batch Flag:true
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BatchRiskAnalysis loadUserData
INFO: @@@ User sync completed for params true: Syskey List is [HL2-QAHR]
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob run
WARNING: *** Job Exception: Cannot assign an empty string to host variable 2.
com.sap.sql.log.OpenSQLException: Cannot assign an empty string to host variable 2.
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
at com.sap.sql.types.VarcharResultColumn.setString(VarcharResultColumn.java:57)
at com.sap.sql.jdbc.common.CommonPreparedStatement.setString(CommonPreparedStatement.java:511)
at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setString(PreparedStatementWrapper.java:355)
at com.virsa.cscext.dao.CSCDAO.updateIgnoredUserData(CSCDAO.java:1388)
at com.virsa.cscext.dao.CSCDAO.populateGenObjUser(CSCDAO.java:1169)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.populateGenObj(BatchRiskAnalysis.java:868)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.insertBAPIUserData(BatchRiskAnalysis.java:142)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.loadUserData(BatchRiskAnalysis.java:390)
at com.virsa.cc.xsys.bg.BatchRiskAnalysis.performBatchSyncAndAnalysis(BatchRiskAnalysis.java:1275)
at com.virsa.cc.xsys.bg.BgJob.runJob(BgJob.java:402)
at com.virsa.cc.xsys.bg.BgJob.run(BgJob.java:264)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.scheduleJob(AnalysisDaemonBgJob.java:240)
at com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob.start(AnalysisDaemonBgJob.java:80)
at com.virsa.cc.comp.BgJobInvokerView.wdDoModifyView(BgJobInvokerView.java:436)
at com.virsa.cc.comp.wdp.InternalBgJobInvokerView.wdDoModifyView(InternalBgJobInvokerView.java:1225)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doModifyView(DelegatingView.java:78)
at com.sap.tc.webdynpro.progmodel.view.View.modifyView(View.java:337)
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.doModifyView(ClientComponent.java:481)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doModifyView(WindowPhaseModel.java:551)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:148)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:319)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:46)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob setStatus
INFO: Job ID: 13 Status: Error
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.BgJob updateJobHistory
FINEST: --- @@@@@@@@@@@ Updating the Job History -
2@@Msg is Error while executing the Job:Cannot assign an empty string to host variable 2.
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.bg.dao.BgJobHistoryDAO insert
INFO: -
Background Job History: job id=13, status=2, message=Error while executing the Job:Cannot assign an empty string to host variable 2.
Jan 13, 2009 12:34:27 AM com.virsa.cc.xsys.riskanalysis.AnalysisDaemonBgJob scheduleJob
INFO: -
Complted Job =>13----
Please let us know how to resolve this error
Thanks and Best Regards,
Srihari.K -
Error while scheduling report for SAP users
Hi All,
We have SAP authentication enabled in our BO environment. (BO XI 3.1 sp2 FP 2.6 on windows 2003 server).
There are some webi reports based on BW Bex queries that we are trying to run on behalf of certain SAP end users. This we are doing using "schedule for" option.
Now what is happening here is if the end user has logged in once in BO system ,it runs fine. But in case user has not logged in to BO (using infoview etc.) ,it throws error saying "incomplete logon data" . Also if user changes or reset his password in BW and if he doesn't login to infoview after that ,system throws another error "Name or password incorrect (repeat logon)".
Based on these observation, we are suspecting if BO system uses stored SAP users credentials while scheduling report for them based on their last login.
Would like to mention here that we have checked option "automatically import users".
Please advice if this behavior is normal or we are missing some setting.
Thanks in advance,
ChandraHi All,
Any pointers or suggestions for this issue ??
Is there a setting/option avialable in CMC which could resolve these errors.
Or, user has to login once to infoview in all circumstances to avoid these errors.
Thanks,
Chandra
Maybe you are looking for
-
Apps for client and fees management
Hi As an architect I require the following in an application. Any developer can help. 1) to maintain client database which includes a) under what category he/she comes under (residential, housing, commercial, etc) B) statement of requirements ( also
-
Can you use logic express on a mac mini for recording
Can i use logic exprees on a mac mini for recording? Ive seen alot of 8,12, and 16 track recorders with a cd burner and it seems like a logical and more productive gues for me to buy a macmini for the same thing of recording and then I can uses logic
-
I changed my email address and updated it to my married name. As a result, when I try to download an app, it keeps telling me that I have the wrong password, despite resetting my password. I have not "upgraded" to the new OS for quite a while... When
-
How do I mark podcasts as unplayed in iTunes 11.0.1?
You can mark unplayed as played but not Played as Unplayed? I've controlled clicked on played podcasts and there is no option to mark as unplayed. thx, Drake
-
Configuring an Outgoing Batch in an agreement - Instance ID not coming back
create a batch in an agreement, click on start, then do several refresh, I do not have an instance ID sent back as mentioned in the documentation. I tried this on 2 different BTS 2010 and 2013, they are both 64 bit, one is win 2008 the 2nd is on a