Date field not working like a date field

We have quite a few date objects in the Universe but only some seem to function as a date field whereas some do not.
The easiest way to tell whether a date field is functioning as a date field seems to be to add the date fields as a filter in a query. If it is a proper date field a Calendar option appears. If it is not, no Calendar option appears.
In the screenshot below, the Latest Approved Date functions like a proper date object and shows a calendar option. The other field does not even though it is a date field too.
I'm checking with this forum as the Universe designer didn't have any answer for this.

HI Vivek,
Go to Universe Designer
click on object (Latest Approved Date)
click on definition
go to TYPE scroll down and select type as DATE
and export now check the filter it will work
try once
Regards,
Ranjeet

Similar Messages

My passbook on my iphone 5 works the same as it did for the iphone 4, its not working like it should. why?

my pass book on my iphone 5 does not work like it should, it works just the same as it did on the iphone 4, i tryed the date an time trick like 5 times an still nothing. i tryed factory reset an nothing. i know it workds different on the iphone 5 then the 4. but i dont know what else to do.

Can you be more specific about what isn't working? Are you running iOS 6 or iOS 6.1?
Did you read the support page on Passbook? http://support.apple.com/kb/HT5483

Siri is not working like it should i ask it to play songs and it just says sorry i cant do that any ideas y

siri is not working like it should i asked it to play songs and it just says sorry i cant do it any ideas y

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

I've updated to iso5 on my iphone 4 but some of the features are not working like the lock screen camera feature. Have I done something wrong?

I've updated my iphone 4 to ISO 5. I could not connect to icloud yet however does this expalin why some of the features of ISO 5 are not working like the camera lock screen feature?
Thanks
C

to see the camera icon, double-click the home button when you are on the lock screen. this will show the music controls and the camera icon. double click the home bgutton again to close them.

Iphone 4s Running Ios(7.1) Camera Focus Not Working Like Text On book It Showed Blurey Text & My Friend Also Same Modle His Camera Focus Perfectly..Is Is Possible To Fix It...Thnx Every 1

Iphone 4s Running Ios(7.1) Camera Focus Not Working Like Text On book It Showed Blurey Text & My Friend Also Same Modle His Camera Focus Perfectly..Is Is Possible To Fix It...Thnx Every 1

Hello SajidChaudhary,
Thanks for using Apple Support Communities.
For more information, take a look at:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Camera isn't functioning or has undesired image quality
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Have a nice day,
Mario

After download ios5 my iPhone dose not work like before why?

After download ios5 my iPhone dose not work like before why?
i have iphone 3gs

OK this is the issue after download ios5 my phone goes crazy like when i turn on my 3G i can`t call someone and i cant even check my email i don't know why ...so after all this problem i have to turn 3G off and than call to my friend so why it work like this ?
i restore my phone ...i restore as a new phone but still i have the problem ....

Problems with "find nearby missing photos", not working like it should in LR4

After I imported photos into LR4 I decided to split the event within the same folder creating 2 subfolders and proceeded to move the files within the finder. Went to LR4 and synchronized the folder but it didn't fix the file location on the missing files. So I tried finding individual files and checked the "Find nearby missing photos" but this doesn't seem to work like it did in LR3, because it won't find any nearby missing files even though they are right there new to each other in the same folder.
I don't want to dremove them and re-import because I have added ratings and I fear I would loose this info if I did that...

Your assumption that you would loose your ratings and develop settings is correct, if you would re-import.
Reimporting is never a good idea.
For the rest you have two alternatives: either you reconnect one image after another, or you undo on OS level what you did in the first place, then execute the move inside LR.
Depending on how many images you moved this could actually be the fastest route out.
"Find nearby missing photos" did not work reliably for me either in LR3. I have never found out when it did and when not, so I have preferred to learn how to perform any such operation inside LR.
Another valid question is why you do not use collections for your desired split , and leave the folders as they were.
According to my prejudice MAC users would not be as conservative in sticking to folder structures as Windows users..;-))
Once you master LR folders could be very unimportant storage buckets, as every angle for organizing your images would be covered by (smart) collections and keywords and other metadata.
Good luck, Cornelia

ITunes Wi-fi sync not working like it should.

So I got a new ipod touch 4th generation because my other one broke. I'm trying to set up wifi sync so I don't have to connect the device to the computer incase it malfunctions. Half the time it doesn't work, and if it does work, I still have to connect it directly to the computer. Sometimes I use wifi sync the first time and it doesn't work, then I plug it into my computer and it detects it. Then I unplug it and use wifi sync and it works like it should. So it kind of defeats the purpose of using wifi sync if everytime I want to sync content through wifi, I'm forced to connect the ipod to the computer. Is there something I'm doing wrong? Please Help!
Also, my Ipod is not even a month old and is working like new. It is refurbished.

Have you looked here:
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing

After the official 10.1 os update my bluetooth in car does not work like it used to.

***SORRY THIS IS CLONED of this http://supportforums.blackberry.com/t5/BlackBerry-Z10/In-car-bluetooth-not-working-properly-after-10...
New to forum sorry.
I have a BB Z10 and whenever I entered my vehicle the in-car bluetooth would connect/pair to the phone and the music which was great and had no problems with listening to music and making phone calls.
But recently with the 10.1 update it's all gone wrong the phone does not respond anymore to making calls, but the music still plays and I can still remote control the music via the steering wheel. however there is no call audio the call starts and it shows it being connected but no audio from the in car bluetooth.
Now I did some CSI investigations into the matter and I have narrowed it down to anything previous to the 10.1 update works fine.
I backed up the phone via BB link and then rolled back the updates and I found that 10.0.09.2372 works just fine with the in-car bluetooth with making calls and playing music I literally just tested this. I then installed the leaked 10.1.0.1880 hoping it was fixed but no improvement over the official 10.1 it still does not play call audio.
I have now reverted back to the official 10.1 and restored phone backup and then once again tried as before with all the pairing one has patience for, it just will not work in my car. I desperately need my Z10 to work in my car!
Is this issue going to be addressed very soon??? I am not the only one with this problem. Help anyone...
I would also like it that the music doesn’t start automatically as I have deezer and would like that to be an option to play that music instead.
Anyway thanks for your time... any help with who to contact or whatever would be appreciated.

Same problem with my z10 since 10.1 OS update. Please help.

Adobe Tech told me HONESTLY that Adobe Connect will NOT work like the Adobe site demo

I am seconds away from subscribing to gotomeeting.com (Which is a GREAT and REALLy easy to use product).
I really want the white board featues, etc. At first I could NOT connect at all...then with an Adobe TEch (FROM INDIA) online with me (very patronizing to me also, by the way). I could connect and when I clicked on "Share My Screen" the adobe connect window minimizes itself and becomes useless to me.
I was told that the tech COULD see my screen. I asked how I would know that. He ACTUALLY told me that the ONLY way I could see the CONNECT window and see all the participants, let other share screens and see and use the whiteboarding is to GET A SECOND COMPUTER!!!!
I HAVE TO USE TWO COMPUTERS in order to use the features demo'd in the demo video.
Isn't that the MOST obsurd thing you could tell someone. AND if it is true, what a piece of carp program.
Too bad, the product does not remotely work like the demo
AND even worse, the tech support has NO IDEA how to use this product and told me IN THESE WORDS that the product DOES NOT REALLY DO WHAT THE DEMO SAYS IT DOES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
What a nightmare!

Wow ... well all I can say is I've been using Connect for 2 years for remote training and for webinars and all sorts of stuff, and in general I'm thrilled with it. I've used the freebie ConnectNow service (via Acrobat.com), the $39.95/mo. Connect Standard account (hosted, up to 15 participants), and for the past 1.5 years, the Connect Pro account, also hosted.
When you are sharing your screen, you don't see any of the Connect "room" interface; all you see is your screen. This is how most of the services work in my experience. If you're just showing a Powerpoint demo that you've uploaded to your account previously, then you *can* see the panels etc. in the Connect room.
Almost all of my demos/webinars/training involved me sharing my screen, so yes, I do connect a second laptop to the room, logging on as a guest, so I can see what my participants see, and I can see what the lag time is. I don't think that's out of the ordinary.
I started using Connect after nightmares with WebEx and other services. It's really important to me that everything works equally on Macs as well as Windows; and so far Connect is great that way.
I do agree the Support is a pain and Connect is missing some features. But all in all it's been nice and stable for me and my clients. You should check out http://connectusers.com; there are wonderful forums and expert users and tutorials over there.
AM

Large vertical gradients not working like examples

Hello guys, now this seems to be a very straight forward thing to do and there are loads of tutorials about the subject. None of them are helping me get this right though, and I can't for the life of me figure out what's wrong...
Im trying to create a simple gui component that has a vertical gradient, simple enough right... I create the sprite, and draw the gradient with beginGradientFill and a matrix with a 90 degree radian angle on it; but it stops working if the sprite has a long width, below is an exmaple of what I mean:
package
import flash.display.GradientType;
import flash.display.Shape;
import flash.display.Sprite;
import flash.geom.Matrix;
public class Main extends Sprite
public function Main()
var theWidth : Number = 800;
var theHeight: Number = 100;
var shape1:Shape = new Shape();
var matrix:Matrix = new Matrix();
matrix.createGradientBox(theWidth , theHeight, Math.PI*0.5, 0, 0);
var colors:Array = [ 0xffffff, 0x000000];
var alphas:Array = [ 100, 100];
var ratios:Array = [ 0, 255];
shape1.graphics.lineStyle(2,0xa1b0b6);
shape1.graphics.beginGradientFill(GradientType.LINEAR,colors, alphas, ratios, matrix);
shape1.graphics.drawRect( 0.0, 0.0, theWidth , theHeight);
shape1.graphics.endFill();
addChild(shape1);
If I change
matrix.createGradientBox(800, 100, Math.PI*0.5, 0, 0);
to
matrix.createGradientBox(800, 100, Math.PI, 0, 0);
it works fine - but horizontally - why is it that applying 90 degrees the fill does not work?
Thanks for your help, I really don't know whats wrong with this

Hi Rob, I'm really confused, if I create a new action script project and use the code i posted I get this:
As you can see its not going from white to black, but instead it just looks grey - although there is a gradient, it looks like its massive or something :S I don't get it
Im using flash builder 4, I create a new action script project, in the as file I paste that code into the constructor and run the application.
ps.. yes i know about the alphas need to be 1, it was a typo when i posted this, setting them to 1 doesn't seem to be my issue. Any other ideas?

Why fms3 edge mode can't not work like fms2 ?

Step 1:
Yesterday,I use edge mode with fms2.05 , and I do like this
URL (
http://www.adobe.com/devnet/flashmediaserver/articles/webcasting_fme_print.html)
PC A run FME 2.5 (flash media encode )+ FMS 2.05 (orgin mode
,use install by default setup)
IP address:192.168.1.1 OS :windows xp sp2
PC B run FMS 2.05 (edge mode ,use install by default setup
and modify C:\Program Files\Adobe\Flash Media Server
2\conf\_defaultRoot_\_defaultVHost_\Vhost.xml , "local"
->"remote" )
IP address :192.168.1.2 OS: windows 2003 sp1
PC C run a viewlive.swf made by me like this:
nc = new NetConnection();
nc.connect("rtmp://192.168.1.2/?rtmp://192.168.1.1/live");
nc.onStatus = function(info) {
if (info.code == "NetConnection.Connect.Success") {
createNetStream(this);
createNetStream = function (nc) { ns = new
NetStream(nc);myvid.attachVideo(ns);myvid.smoothing =
true;ns.play("test", -1);};
I can see the live webcasting on PC C, all think is OK !
Step 2
Today , I install fms3.02 instead of fms2.05 in PC A and PC
B, do the same thing like Step 1
but run the viewlive.swf can't see anything.
I check PC B : C:\Program Files\Adobe\Flash Media Server
3\logs\core.00.log
2008-05-24 18:33:14 3480 (i)2581231 Core (3480) connected to
admin. -
2008-05-24 18:33:14 3480 (i)2581246 Core (3480) sending
register cmd to edge. -
2008-05-24 18:33:14 3480 (w)2631008 Asynchronous I/O
operation failed (Failed to attach to completion port:
参数不正确。 87). -
2008-05-24 18:33:15 3480 (i)2581234 Core (3480) connection to
admin accepted. -
Asynchronous I/O operation failed (Failed to attach to
completion port: 参数不正确。
87). Why ?
Should anybody can help me?

This works. I change the visible property instead of using
removeChild, though I don't know why yours does not work.
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:states>
<mx:State name="state2">
<mx:SetProperty target="{popupbutton1}" name="visible"
value="false"/>
</mx:State>
</mx:states>
<mx:Script>
<![CDATA[
[Bindable]
public var treeXml:XML=
<Child>
<Child fatherCategoryId="0" categoryName="expenses"
categoryId="38">
<Child fatherCategoryId="38" categoryName="eat"
categoryId="40"/>
</Child>
<Child fatherCategoryId="0" categoryName="income"
categoryId="39">
<Child fatherCategoryId="39" categoryName="salary"
categoryId="41"/>
</Child>
</Child>
]]>
</mx:Script>
<mx:Button x="84" y="32" label="state1"
click="currentState=''"/>
<mx:Button x="166" y="32" label="state2"
click="currentState='state2'"/>
<mx:PopUpButton id="popupbutton1" height="24" width="150"
textAlign="left" label="please select..." x="84" y="85">
<mx:popUp>
<mx:Tree id="cateTree" dataProvider="{treeXml}"
labelField="@categoryName" showRoot="false"
width="160" textAlign="left"/>
</mx:popUp>
</mx:PopUpButton>
</mx:WindowedApplication>

Email Indicator not working like on the curve??

I just upgraded to the bb Tour 9630, after having much frustration with the curve 8330. Since I received the Tour, I can't seem to figure out why I cant get the following to work like I had on the curve...
On the new Tour handset, I have 2 different email addresses (both gmail) which I have separated as 2 different icons on my phone. Every time I receive an email, the new email icon appears at the very top of the phone (along with all other icons), however there is no red asterisk that appears directly on top of the actual mailbox which received the mail. This is very frustrating because I need to check both email boxes to see where the new mail was received.
When I go to OPTIONS, GENERAL OPTIONS, the "Display New Message Indicator" option only appears when you select "UNREAD" from the DISPLAY MESSAGE COUNT. And then it disappears when I select "NONE." So this means that I can only see the red asterisk over the specific email box if I have those annoying counts of emails at the top also.
I didnt have this issue with the Curve. I was able to have the red asterisk on the individual inbox icon, without the email icon (and count) at the top of the screen. Was this a feature changed for the tour?? I find it hard to believe, and I would be very surprised if that's the case. Maybe my phone is defective?
Please help! Thanks

Hey you're right it works on the iPad emal app.
It was gmail on the iPad that wasn't working w/ the scheme. Gmail in the desktop browser works but not the gmail ipad app.
Well i'm happy Thanks Rockie.

Smudge brush not working like in regular Photoshop

I just got Touch for my Samsung Galaxy Tab 2 10.1 yesterday. I needed a blending/smudging capability and saw that the toolset for Touch had both blur and smudge. So I got it. Blur seems to work fine...but smudge only seemed to darken my colors and formed a wierd edge, hard edge betwee the colors. Not at all like in the regular Photoshop...I have CS6.
I am thinking of returning the Tab 2 and getting the Note instead which has pressure sensitivity (or so I have heard)...but if there is no decent paint program out that will allow for halfway decent blending then I will simply return the Tab and wait a bit longer for the paint programs to evolve in this new format.
Has anyone else noticed this effect with smudge? Is there a setting that will make it work like it's full fledged cousin?
Thanks

I'm also having problems with the smudge/blur brush. My tablet (Samsung Note 10.1) was bought so I could do my work on the fly using a touch sensitive stylus with Photoshop. However the smudge brush simply isn't working as it should and this all but renders PS redundant in my portable work flow as I use this particular brush a lot.
Like the original poster my smudge brush seems to be simultaneously burning/darkening. The harder I lean the more the image underneath darkens. Likewise if I lift the pen off between strokes each successive stroke darkens. Do it a sufficient amount of times and I end up with black even if I'm blending along the edge of 2 pale hues! I'm a very experienced Photoshop user so I'm fairly confident that the fault lies not with my brush settings but rather seems to be an unwanted side effect of the brush.
As the Note tablet is a new device I'm guessing that there will be more complaints about this popping up as and when the Note becomes more popular as a creative tool. Meantime I find myself unable to do the work I bought the tablet for in the first place.
Any ideas what software I can use to work around this? I need something which will allow me to work in layers with a smudge tool enabling me to - for example - smudge and blend cross hatched lines to create a highly finished tonal surface. Ordinarily I would use PS for this! The ability to import this precisely smudged image into PS Touch for further editing would be a large bonus.

Bluetooth is not working like before Ios 4.0 on 3GS

Since i have the update from soft 3.x to 4.0 i have problems in my car to connect to the Car Bluetooth Car-Kit.
I have a original BMW bluetooth Car-Kit wich was working perfect.
Since the update to version 4.0 most of the times it would not connect automaticly with the Car. so the connection is not always there.
After a little bit of pressing settings (bluetooth) on the phone the connection is made.
I am affraid to update again to the newer one 4.01 because maybeit will not working anymore.
Before the update to 4.0 there was no problem at all , everytime when in the car the connection was made automaticly without any problems. Now it is 2/10 auto connected.
Already removed the connection and paired it . but the result is the same. No stable automatic connection. Once connected there is no problem until next Car-Ride.
Anyone with a solution ?
Thx
Dcaub

Thanks for your response ... yeah that's exactly what I wound up doing and it worked. Man what a nasty upgrade this has been.
Didn't expect to have to do a full restore of the iPOD. Of course that takes all the personal settings you made and nuked them back to the factory settings plus the latest system upgrade ... but hey ... it solved the problem. Wonder what's next?

Power button not working like it should...

When booting up, I have to press power button several times. Finally, when it does come on (Pavilion dv6Notebook), the fan runs quite a bit. I am worried my hard drive is about to go. Any tips?

Try a soft reset and see what happens.
If the power button is not working, here is a link for a program that remaps the power button on your TX so you can hard reset and power off.
There is a program called PowerBtn 2.0. This allows you to turn off the device when the power button does not work. (Thanks to Computerwiz for the info.)
Click on the following link for the website.
http://www.canuck-software.ca/
For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
http://kb.hpwebos.com/wps/portal/kb/na/tungsten/tx/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Date field not working like a date field

Similar Messages

Maybe you are looking for