Date field problem in MS Access

Hi
I am doing a program in which the requirement is i am storing the system date and time in a date field with name logindate, now i want to compare with that date, by taking into a string variable but it is showing an error like "data type mismatch in criteria expression", but i didn't any problem like this in using MY Sql(taking the date into the string variable and comparing).
So i would like to know how can i compare the present sysdate with the stored date value in the databse(MS Access) for an emp id.
Date format i am storing in to the databse is "yyyy-MM-dd HH:mm:ss", and while retriving i am getting as of my requirement but i am unable to compare only the date part(after parsing it), plz it is urgent reply asap
can u plz send me the code.
sasi.

If you say a database column has SQL DATE type, then you need to bind it to a java.sql.Date.
If your UI takes input as String, you have to convert it to a java.sql.Date first.
Best to use java.sql.PreparedStatement and bind Dates properly. If you do that, formatting doesn't matter (as it should not).
%

Similar Messages

  • DATE FIELD PROBLEMS - URGENT

    I´m having trouble with FormsCentral.
    My form is running about 8 months with no problems.
    Yesterday people started to complain that the system doesn´t accept any date.
    That means the date field restricts date entries, from date dd/mm/aaaa (brazilian format) to another dd/mm/aaaa, but every date that users input in, is considered by the system as invalid, even it´s a correct and valid date right between the interval specified!
    I need Help Urgent!!!
    I depend on these forms to finish the payrol service from here.
    Thanks
    I´ll be waiting.
    Maurício Galletti
    Message was edited by: SNOWMAUSS
    It look like the system accepts just dates starting from the date of today.
    I´m testing.
    Please help.
    Thanks
    Message was edited by: SNOWMAUSS
    It looks like the system have some problem just with the date 20/10/2013?!
    I´ve fixed the problem change the interval from 20/10/2013 to another date  and used  21/10/2013 to another date and it works!
    But I think something is wrong with the 20/10/2013 date?!
    To reproduce the erros just create a new form with date feature with this exaclty configurations and the bug appears:
    I´ll keep waiting
    Message was edited by: SNOWMAUSS

    Hi
    I´ve concluded that the problem persist if the date interval starts at the
    specific date "20/10/2013". Don´t know why?!
    Look at the screen capture above, you aks for
    Thanks a lot
    image: Imagem inline 1
    Maurício P. Galletti
    Contador
    [email protected]
    ( 55 11 3331-5567
    www.cadt.com.br
    2013/10/29 Genevieve Laroche <[email protected]>
       Re: DATE FIELD PROBLEMS - URGENT  created by Genevieve Laroche<http://forums.adobe.com/people/Genevieve+Laroche>in
    FormsCentral - View the full discussion<http://forums.adobe.com/message/5797083#5797083

  • J1inqefile - Excel output - Date field problem

    Dear All,
           I am facing a problem while executing the tcode-J1IEQEFILE.
           When choosing excel file output and executing, 3 files are created. But the problem is, the value of date field in one of the files is not in date format.
        Please help me out on this regard.
    Thank you,
    S.Sridhar

    I am also facing same problem in text file as well as in Excel file also. kindly some one could help me ( Date on which Amount paid  and Date on which tax deducted).
    Thanks
    Venkat

  • ITS Mobile Date Field Problem

    In ITS Mobile I developed a screen which contains a date field. I click question button to select a date, it opens a new screen which includes a calendar. But I can not select a date because no clickable days in new date selection screen. What can i do for this problem.
    Thanks...

    Parameters are:
    Service parameters..
    ~THEME              99
    ~TRANSACTION               LM01
    #MOBILE             This is a mobile service
    ~ITSMOBILE       1
    #SOURCES          Template search sequence
    ~SOURCES          Z_LM01,ITSMOBILE
    #POPUPS            Show popups, default is no
    ~POPUPS            1
    #ITSMOBILEDEVICEINCLUDE     include a device specific html
    ~ITSMOBILEDEVICEINCLUDE     devicesample
    #MESSAGE         SOUND Plays a background sound if a message appears
    ~ITSMOBILEMSGSOUND             1
    #SYSTEM             MODAL POPUPS Shows express mails / system messages
    ~SHOW_SYSTEM_MODAL          1
    İnternet sevice parameters (SE80)
    ~GENERATEDYNPRO     0
    ~THEME                              99
    ~TRANSACTION               LM01

  • Date Field Problem

    Hi,
    I'm new to ApEx. In my previous life I've done web development, but am not an Oracle developer, so I don't know the in's and out's or Oracle or PL/SQL.
    I have a Updated_Date field in my table which is defined as a date field. I want that field to be updated with the current date and time when a record is updated, so I created a computation to populate the field. The item on my page that refers to the Updated_Date is defined as Displays As Text (Saves State).
    I was told my our resident Oracle developer that all I needed to use was SYSDATE to populate the field, but when I use SYSDATE it only populates the date portion (not the time).
    I have searched the forum and have found several examples of code for populating the date, but when I use them they either: 1. result in an invalid month error, or only populate the date.
    What am I doing wrong?
    Thanks, Tony

    Hi Joe,
    Sorry that I wasn't clear.
    I orignally had the item set as display only (save state) as you suggested. I was getting invalid month errors then when I tried to add the time to the on the computation.
    When I saw your response I thought I needed to change the Display As on the item to date picker with a format mask, so I did. That is what caused it to begin working for me, but I didn't know it at the time, because I changed the computation and the item.
    Then, when you said a display only (save state) would work I changed my code back, but didn't completely test. I thought it was still working, but it wasn't. When I later tried to do a save it got the invalid month error again.
    So, I changed it back to Display As - date picker. That's what I meant by changing it to a date field on the page. Sorry.
    Tony

  • Alv + date field problem

    Hi All
    I have a screen with a date field and an alv grid.
    When I hit the f4 help on the date field the date does not appear.
    When I test this screen in the screen painter the date picker shows up, but when I run the program it does not, it is like something is overwritting it.
    Can anyone help with this please
    Thank you

    Hi
    setting the search help BU_DATE_CHAR didn't work.
    When I press the button on the date field or do an F4 the alv seems to get the focus. 
    Thanks anyway

  • DATE field problem in JSF code

    Hi,
    I am a newbie on JSF and working with a JSF application development. I have a problem with a data type: DATE. Here is what had happened; I tried to write a new record to a table, in my "write" paragraphs I have the following codes:
    tabelOneDataProvider.setValue("joindate", rowKey, joinDate1.getSelectedDate());
    tableOneDataProvider.commitChanges();
    The problem is when I was running the program to write a record, I got the following error:
    Cannot append new tableOne data: java.lang.RuntimeException: Number of conflicts while synchronizing: 1 SyncResolver.INSERT_ROW_CONFLICT row 1 Can't infer the SQL type to use for an instance of java.util.Date. Use setObject() with an explicit Types value to specify the type to use.
    At that point, I was trying to write a DATE value from a "calendar' component (joinDate1 field with MM/dd/yyyy format) into a field name: "joindate' (data type is DATE) in tableOne file.
    Any advice on resolving this problem? Please help me to get more knowledge on this. Thanks!

    Hi,
    You must use sql type. So instead of:
    tabelOneDataProvider.setValue("joindate", rowKey, joinDate1.getSelectedDate());
    tableOneDataProvider.commitChanges();try something like:
    java.util.Date date = joinDate1.getSelectedDate();
    java.sql.Date dateToInsert = new java.sql.Date(date.getTime());
    tabelOneDataProvider.setValue("joindate", rowKey, dateToInsert);
    tableOneDataProvider.commitChanges();best regards
    Grzegorz

  • PCR date field problem

    Hi All,
    When we open MSS PCR Forms the Date of Change field is populating in Arabic language. All other fields are fields correctly displayed.
    We are able to change the other fields except Date of Change field.
    Does anyone have a solution for this?
    Please advice.
    Regards,
    Srinivas
    Edited by: Srinivas Rao Srungarapu on Oct 14, 2008 9:39 PM

    Before saving the data to databse u should convert the dates into internal format using FM 'CONVERT_DATE_TO_INTERNAL' .
    EX:
    REPORT ZEXAMPLE.
    TABLES: MARA, MDKP.
    DATA V_DATE(30).
    SELECT * FROM MARA UP TO 100 ROWS.
      SELECT SINGLE * FROM MDKP WHERE MATNR EQ MARA-MATNR AND
                                      BEADA NE '00000000'.
      IF SY-SUBRC EQ 0.
        V_DATE = MDKP-BEADA.
        WRITE:/ 'DATE IN INTERNAL FORMAT:', V_DATE.
        CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
             EXPORTING
                  DATE_INTERNAL            = MDKP-BEADA
             IMPORTING
                  DATE_EXTERNAL            = V_DATE
             EXCEPTIONS
                  DATE_INTERNAL_IS_INVALID = 1
                  OTHERS                   = 2.
        IF SY-SUBRC EQ 0.
          WRITE:/ 'DATE NOW IN EXTERNAL FORMAT:', V_DATE.
        ENDIF.
        CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
             EXPORTING
                  DATE_EXTERNAL            = V_DATE
             IMPORTING
                  DATE_INTERNAL            = V_DATE
             EXCEPTIONS
                  DATE_EXTERNAL_IS_INVALID = 1
                  OTHERS                   = 2.
        IF SY-SUBRC EQ 0.
          WRITE:/ 'DATE NOW BACK IN INTERNAL FORMAT:', V_DATE.
          ULINE.
        ENDIF.
      ENDIF.
    ENDSELECT.

  • Omni portlet - javascript - date field problem

    I want to manipulate a database date type field with javascript in omniportlet layout.
    In the source tab of omniportlet I use the SQL: (it's very simple for example)
    select id, to_char(enddate, 'DD/MM/YYYY HH24:MI') edate, enddate
    from tlh.auctionsession
    where id = 1
    In the layout tab (HTML form). I write this javascript code in Repeating Section: (it's very simple for example)
    <script type="text/javascript">
    document.write(##EDATE##);
    </script>
    It's not woking. Anytime I use the ##EDATE## or ##ENDDATE## in my javascript code, It's not working.
    If I put ##EDATE## of ##ENDDATE## in the HTML's body, it's display well.
    I am really mad with it.
    Do you have any idea? Please help me with it. Thank you very much.
    Sorry for my bad English.

    // custom vaildation scirpt for entered date being today or a future date;
    // date format for the field;
    var cDateFormat = "mm/dd/yyyy";
    // convert the entered value to a date objecta;
    var oEntered = util.scand(cDateFormat, event.value);
    // strip down to just the year, month and day
    oEntered.setFullYear(oEntered.getFullYear(), oEntered.getMonth(), oEntered.getDate());
    // convert todays date to a date object;
    oToday = util.scand(cDateFormat, util.printd(cDateFormat, new Date()));
    // strip down to just the year, month and day
    oToday.setFullYear(oToday.getFullYear(), oToday.getMonth(), oToday.getDate());
    // compare the date values
    if(oEntered.getTime() < oToday.getTime()) {
    // error message date before today's date
    app.alert("Date must be today's date or a futuer date!", 1, 0);
    // set return code to error status;
    event.rc = false;
    // validation is assumed to be true unless the event return code value is false;
    // end custom validation script;

  • SAP GUI 720 (patch level 6) - Date field problem

    Hello all,
    in selection screens (like transaction IW38) some users use the F4 help and the enter key to select a date (like field "Period"): they jump with the tab key to the field, delete the current entry and then press F4 and hit the enter key in the popup to get today's date. (Reason: faster than using the mouse, they say...)
    This does not work anymore with SAP GUI version 7.20: The enter key is not working in the popup. Does anyone know a fix for this or is it intended to work this way?
    Thanks in advance for an answer!
    Best regards
    Daniel

    Thanks for your reply. No, GuiXT is not active.
    Interesting is:
    I have a PC with an older version of SAP GUI 7.20 (patch level 2). There it works as previously with 7.10 (hitting the enter key in the calendar popup window works).
    The reason is (haven't noticed that before), that in 7.20_2 the focus in the calendar popup is in the calendar itself (the lower part). In 7.20_6 the focus is on the top line, where the current date is displayed (like 29.08.2011), and the day is highlighted. The user has to press the tab key to jump from there down to the calendar, and then can press the enter key.
    Now the question is: has this been changed from patch level 2 to 6, or is it an SAP GUI option, that can be changed (and that I cannot find)??
    Best regards
    Daniel

  • CRVS2010 beta -  date field not display in details section

    I use Visual stdio 2010 so i install crystal report 2010 for report.
    It work fine .
    but in report detail section there is date field then it will not be display.
    alos if we do group on date field it will give error when we try to open report.
    Plese geve me possible soluction for date field problem.
    Edited by: hitesh_tatva1 on Jun 22, 2010 11:35 AM
    Edited by: Don Williams on Jun 22, 2010 7:20 AM

    Solution Found
    Don't install sp2it sucksclassic case of the cure being worse than the disease.
    Downloading and installing the SP3 redisist fixed the issue.
    This link is probably appropriate:
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm
    Software Product->select Crystal Reports
    Version->select Crystal Reports 2008
    important part
    Software Type->Utility Click Search Download the redist install.
    Not very intuitive, but you'll need to do this so you download the runtime and not the full version.
    Hope that saves you the 5 hours it took me to figure this darn thing out...I hate unintuitive products--they aren't very professional.
    +
    SAP, where do I send the bill for supporting your own product?
    I too have the same problem. Hopefully we can get a solution to this soon as the delayed release of the 2010 runtime has us in a difficult place.
    The problem: I upgraded my project to Visual Studio 2010; therefore, I upgraded to the Crystal Reports for Studio 2010 beta.
    Everything worked fine until I modified the app.config so that I could deploy the application into our test environment. We do not have Visual Studio installed in this environment, so we needed to have a Crystal Reports Runtime. According to the SAP website deployment guide, currently the only way to deploy a 2010 app is to use the 2008 runtime by modifying the app.config file to redirect the bindings.
    __Now, none of my date fields appear on the reports.__
    Just to test, in my development environment, I commented out the redirects in the app.config and the dates appeared. I uncommented the redirects so that the 2008 runtime would be used and then my dates disappeared from the report.
    Here is the entry I put into the app.config:
    <runtime>
        <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
          <dependentAssembly>
            <assemblyIdentity name="CrystalDecisions.CrystalReports.Engine" publicKeyToken="692fbea5521e1304" />
            <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.2000.0"/>
          </dependentAssembly>
          <dependentAssembly>
            <assemblyIdentity name="CrystalDecisions.Shared" publicKeyToken="692fbea5521e1304" />
            <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.2000.0"/>
          </dependentAssembly>
          <dependentAssembly>
            <assemblyIdentity name="CrystalDecisions.ReportSource" publicKeyToken="692fbea5521e1304" />
            <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.2000.0"/>
          </dependentAssembly>
          <dependentAssembly>
            <assemblyIdentity name="CrystalDecisions.Windows.Forms" publicKeyToken="692fbea5521e1304" />
            <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.2000.0"/>
          </dependentAssembly>
          <dependentAssembly>
            <assemblyIdentity name="CrystalDecisions.Enterprise.Framework" publicKeyToken="692fbea5521e1304" />
            <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.1100.0"/>
          </dependentAssembly>
          <dependentAssembly>
            <assemblyIdentity name="CrystalDecisions.Enterprise.InfoStore" publicKeyToken="692fbea5521e1304" />
            <bindingRedirect oldVersion="14.0.2000.0" newVersion="12.0.1100.0"/>
          </dependentAssembly>
        </assemblyBinding>
      </runtime>
    Your help is much appreciated.
    Thanks,
    Michael
    Edited by: SaganDraxan on Jul 16, 2010 8:23 PM

  • ISE guest access - can't match on Optional Data fields

    Hi all
    I need to have 2 different types of guest users that will get different level of access with DACL / Airspace ACL
    I thought that best way to do that is simply matching one of optional data fields you can setup in Sponsor Portal
    Unfortunately as soon as I reference Optional Data field in Authorization rule I get no match. Can't also match on username which would not help anyway.
    getting redirected, login, getting redirected again etc.......
    This is affecting both wireless and wired.
    As soon as I remove that additonal condition from authz rule guest access works fine - getting redirected, log in, surf the internet.
    Is this is bug with ISE that you can't match guest optional data fields?

    Hi evnafets,
    You were right. How silly I am didnt see that small thing- but STILL PROBLEM IS UNSOLVED.
    [ore]
    java.sql.SQLException: [Microsoft][ODBC Microsoft
    Access Driver] Missing ), ], o
    r Item in query expression 'Post_Date LIKE
    to_date('04-06-2005',' dd/MM/yyyy''.
    Like it says, you have a missing ")" character
    rs=stmt.executeQuery("SELECT Name FROM
    NoticeBoardTable WHERE Post_Date LIKE to_date('"+
    date_str+"', 'dd/MM/yyyy' <--HERE NEED A CLOSING
    BRACKET ");
    When I did this it said to_date function is not available that because Ms-access doesn't have this function. Then I just changed the query to:-
    rs=stmt.executeQuery("SELECT Name FROM NoticeBoardTable WHERE Post_Date LIKE "+ date_sql ); . Although it didnt generate any exception, but dont show any record.
    But even better would be to use a prepared
    statement.
    String sql = "SELECT Name FROM NoticeBoardTable
    WHERE Post_Date LIKE  ?";
    PreparedStatement stmt = con.prepareStatement(sql);
    stmt.setDate(1, date_sql);
    ResultSet rs = stmt.executeQuery();
    I had prepared statement in my final servlet, I made this one just to check why its not working on dates. Also on your advice I changed it to prepared statement. It runs fine but didn't show any record with date 04-06-2005 although I have it in my database (not generating any exception).
    I print the sql date throuht servlet just to check , its showing 2005-06-04. May be its formate problem.
    Thanks
    Regards

  • Is anyone else having problems with Apertures Date fields?

    After experiencing a sysems failure I began restoring my images from backups.  I have had no end of problems with Image dates.  I have come to the determination that Aperture is NOT using either the "Create Date" or "DateTimeOriginal" as the image "Date" or "Date Created" data if other fields have other dates.
    Here is a clip from my image metadata using exiftool:
    File Modification Date/Time     : 2012:09:23 19:53:15-04:00
    File Access Date/Time           : 2013:01:16 11:34:38-05:00
    File Inode Change Date/Time     : 2013:01:16 11:31:32-05:00
    Create Date                          : 2006:02:20 11:51:12.10
    Date/Time Original              : 2006:02:20 16:51:12.10
    Modify Date                          : 2006:02:20 11:51:12.10
    And here is what Aperture utilized on import
    Date:                               9/23/12 7:53:15 PM EDT
    Date Created                         9/23/2012 7:53:15 PM
    So Aperture utlized the File Modification Date/Time as the Create Date despite that the fact that the Create Date field is present and is properly formatted in the original image.
    According to the Aperture mapping table, this shouldn't be happening.
    Now, before someone recommends that I use Aperture's Date Adjust utility - I'm talking about  slightly over 30,000 images.  Editing images one at a time, or in blocks when you don't know what field Aperture is using as the Create Date would require individual inspection of each image followed by manual adjustment of each image.  That approach isn't acceptable.

    Hmm ok, let me restate the issue then, I thought I was clear.  I could have pointed out in my original post however, that only the EXIF and IPTC date fields were displayed from the metadata dump.
    The data set presented in my first post is the EXIF dataset from the file which clearly shows the image was captured by digital camera at
    Create Date                          : 2006:02:20 11:51:12.10
    Date/Time Original              : 2006:02:20 16:51:12.10
    (The delta of 5 hours is the result of Zulu versus local time offset)
    But, when I ingested it into Aperture, the import routine utilized the IPTC field
    File Modification Date/Time     : 2012:09:23 19:53:15-04:00
    which is updated by the OS whenever you move the file around outside of Aperture. (a number of image data fields are updated by the OS - filename for example is another.).  This resulted in the image date fields being stamped in Aperture as:
    Date:                               9/23/12 7:53:15 PM EDT
    Date Created                         9/23/2012 7:53:15 PM
    Which obviously came form the File Modification Date/Time field and not (either) the Create Date or Date/Time Original fields.

  • Problem with Date fields in Search panel

    Hi all,
    I use TP2 and in my jspx page I have a search panel with two date fields and table where the results is displayed. But there is a problem with these date fields, because when I search dates the results is nothing even I retype the date from table. Also I have other pages where this problem exist with same structure.
    Could somebody help me with some advice?
    Thanks in advance!

    Hi Frank,
    Thanks for the answer.
    I use the standart method to make search panel with drag and drop the data control to the page. The other search panel fileds work fine, only the date fileds are problem. Maybe something in view object doesn't work properly.
    Here I post the code from my page.
    <table border="1" style="margin:5px;">
    <tr>
    <td>
    <af:showDetailHeader text="ТЪРСЕНЕ" disclosed="true"
    inlineStyle="width:780px;">
    <table cellspacing="2" cellpadding="3" border="0">
    <tr align="left">
    <td align="right">
    <af:outputLabel value="#{bindings.EGN.hints.label}"/>
    </td>
    <td align="left">
    <af:inputText value="#{bindings.EGN.inputValue}"
    label="#{bindings.EGN.hints.label}"
    columns="#{bindings.EGN.hints.displayWidth}"
    maximumLength="#{bindings.EGN.hints.precision}"
    simple="true"/>
    </td>
    <td align="right">
    <af:outputLabel value="#{bindings.LNC.hints.label}"/>
    </td>
    <td align="left">
    <af:inputText value="#{bindings.LNC.inputValue}"
    label="#{bindings.LNC.hints.label}"
    columns="#{bindings.LNC.hints.displayWidth}"
    maximumLength="#{bindings.LNC.hints.precision}"
    simple="true"/>
    </td>
    <td align="right">
    <af:outputLabel value="#{bindings.AccPersonID.hints.label}"/>
    </td>
    <td align="left">
    <af:inputText value="#{bindings.AccPersonID.inputValue}"
    label="#{bindings.AccPersonID.hints.label}"
    columns="#{bindings.AccPersonID.hints.displayWidth}"
    maximumLength="#{bindings.AccPersonID.hints.precision}"
    simple="true"/>
    </td>
    </tr>
    <tr align="left">
    <td align="right">
    <af:outputLabel value="#{bindings.PersonName.hints.label}"/>
    </td>
    <td align="left" colspan="5">
    <af:inputText value="#{bindings.PersonName.inputValue}"
    label="#{bindings.PersonName.hints.label}"
    columns="#{bindings.PersonName.hints.displayWidth}"
    maximumLength="#{bindings.PersonName.hints.precision}"
    simple="true"/>
    </td>
    </tr>
    <tr align="left">
    <td align="right">
    <af:outputLabel value="#{bindings.DateFrom.hints.label}"/>
    </td>
    <td align="left">
    <af:inputDate value="#{bindings.DateFrom.inputValue}"
    label="#{bindings.DateFrom.hints.label}"
    simple="true">
    <af:convertDateTime pattern="#{bindings.DateFrom.format}"/>
    </af:inputDate>
    </td>
    <td align="right">
    <af:outputLabel value="#{bindings.DateTo.hints.label}"/>
    </td>
    <td align="left">
    <af:inputDate value="#{bindings.DateTo.inputValue}"
    label="#{bindings.DateTo.hints.label}"
    simple="true">
    <af:convertDateTime pattern="#{bindings.DateTo.format}"/>
    </af:inputDate>
    </td>
    </tr>
    <tr>
    <td align="right">
    <af:commandButton actionListener="{bindings.Execute.execute}"
    text="#{bundle.FindBtn_LABEL}"
    disabled="#{!bindings.Execute.enabled}"
    icon="/images/find.png"/>
    </td>
    <td align="left">
    <af:commandButton text="#{bundle.FindClearBtn_LABEL}"
    icon="/images/find_clear.png"
    action="#{PeopleBean.onClearVCBtn}"/>
    </td>
    </tr>
    </table>
    </af:showDetailHeader>
    </td>
    </tr>
    </table>
    Also I have a result table for the search panel, but I don't believe the problem can be there because it works fine when I search in fields different by inputDate.
    Do you have any suggestions?

  • Problem with Date-Field

    Hi,
    I have a problem with a date-field. Maybe I must describe the problem more detailled, but first I just want to ask you, if you know the following error-message: "21.10.2010 kommt nicht in der Menge der erlaubten Werte vor". I don't know the correct translation but it must be something like this: "21.10.2010 does not occur in the quantity of the permitted values". I don't find the position in the sourcecode of this message. And I know, that this message isn't thrown by a functionblock from SAP. So what is the describtion of this message?

    Yes I have a date field in my form. Ok I must describe it more detailled. I have an employee searchfield. After select an employee you see a form. After filling the form you click on "Send". It creates a ticket and sends the data to the Backend and jumps back to the employee search field. Untill this point everything works fine. There is no problem with the datefield. Now I want to create the form. I choose an employee and fill the form. But now it comes this message. But not after clicking the "send" button. The message comes after changing some data (e.g. change a radio button). So it looks like a validationproblem, but only at the second creationprocess. Maybe the first date is in some cache? I don't know...

Maybe you are looking for