Date format accepted in new table but not in active table for DSO, BI 7.0

Hi All,
Need help from the experts, i was trying to load Flate file data in CSV(Coma separated) and cell type general for dates(yyyymmdd). everything was fine i have a routine for new fields in DSO for Fiscal week and Fiscal Quater which is calculating based on my Flate file date i.e delivery date(yyyymmdd).
The New table of DSO means before activation everything was fine and all the logics and mappings working for the Fiscal week and Fiscal Quater and that can be visible, But after activation the same only the Fiscal week and Fiscal Quater is not showing data, its comming as blank and '000000' for all records.
As the Fiscal week and Fiscal Quater is maintained as custmised InfoObject with data type NUM.
Can you tell what i am missing, because i tried with different cell type also in CSV File.
Thanks and Regards,
Taps
Edited by: Taps on Oct 1, 2010 1:21 PM

Resolved...!!!
Follow the link ...
/people/maheshsingh.mony5/blog/2010/09/24/update-behavior-of-end-routine-in-transformations
Regards,
Taps
Edited by: Taps on Oct 1, 2010 2:02 PM

Similar Messages

Data exists in DSO New table but not in Active table

Guys,
I am loading data from one DSO to another DSO, in my target DSO I have 6 fields which 2 of them are mapped in Transformation and remaining 4 will be populated by Start routine and End routines. Before Activating I am seeing all 6 fields got populated in New data table but after activating I am only seeing the 2 fields in Active data table but not those that are populated through Start and End rouitnes.
I have only one Key in my DSO, am I missing something here?please let me know.
Thanks,
KK

Hi,
beside end routine, there will be one icon.
click on that.
you will see two options.
select the option "populate values into fields with out active transformation rules"
don't remember the words correctly but gives the same meaning...
Activate the transformation.
this will solve your problem
Regards,
Raghu
Edited by: Raghu tej harish reddy on May 2, 2009 11:10 PM

I just buy a new iphone 4S, i wanna sync my data from 3GS to new iphone but i forget the password for the 3GS

i just buy a new iphone 4S, i wanna sync my data from 3GS to new iphone but i forget the password for the 3GS

Connect your 3GS in recovery mode and restore, you'll get the option to reset the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.

Allow user to select data, see the tables list but not view the table/view/stored procs definition

Hi,
May I know how to achieve the above ? Please enlighten me.
TIA !

So you want users to be able to see the name of the table, but not the definition? I am afraid that this is not possible. You can give users access to a table and hide the definition, but the name is considered part of the definition.
Olaf mentioned VIEW DEFINITION. What he did not say is that when you have SELECT permission (or EXECUTE permission on a stored procedure), the permission VIEW DEFINITION is implied by the stronger permission. For this reason you need to explicitly DENY this
permission as shown in the script below.
In the script I create a user without a login and then impersonate a user. This is an excellent way to test permissions.
[sql]
CREATE TABLE tabbe (a int NOT NULL)
go
CREATE USER usse WITHOUT LOGIN
go
GRANT SELECT ON tabbe TO usse
DENY VIEW DEFINITION ON tabbe TO usse
go
EXECUTE AS USER = 'usse'
go
SELECT * FROM tabbe
go
SELECT name FROM sys.objects WHERE type = 'U'
EXEC sp_help tabbe
go
REVERT
go
DROP USER usse
DROP TABLE tabbe
{/sql]
Note: rather than denying VIEW DEFINITION on an individual object you can leave out "ON tabbe" to deny the permission across the database.
Erland Sommarskog, SQL Server MVP, [email protected]

Sharepoint Custom calendar – Hover over the date to add a new item is not working – Sharepoint 2010

Hi,
In my Sharepoint visual web part i am using default sharepoint calendar view. But Mouse hover over the date to add a new item is not working. Please see this image below i need the same add new item functionality.

Hi Sudhanthira,
Couple of simmilar queries i can see from Madhu posted.
Please follow this thread:-
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010programming/thread/b62f9b7e-2ce1-4efd-905c-9cc5471ad216
To be or Not to Be..The question is this only......

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg

I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not enough space?

I had a repair done at the apple store where the replaced my hard drive and copied my other hard drive over to the new one. Everything is fine except the time machine wont reconnect to my old file and is trying create a new file but not there is not enough space for both files files? Do I need to do something to have it continue to update my old file instead of recreating a new one?

Depending on what version of OSX you're running, and how the data was transferred, you may be out of luck.
If you're running Lion, and your backups were made to a directly-connected external HD (ie, not a Time Capsule or other network location), you may be able to get Time Machine to "associate" the new disk with the old backups. See #B6 in Time Machine - Troubleshooting, especially the pink box there.
If you're running Snow Leopard, you might be able to do a full system restore of your backups to the new HD. See Time Machine - Frequently Asked Question #14 for detailed instructions. That should leave a "trail" that Time Machine can follow to "associate" the new drive with the old backups. Unfortunately, that doesn't always work, and there's no way to do it manually, as there is with Lion.

I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

I upgraded to OS Yosemite on my MacBook Air...and I cannot upgrade the Adobe Flash download that Adobe keeps asking me to download. I get the screen and when I click on the icon it just creates a new window but not download. Thoughts?

I just tried the link and it is just fine. If the GateKeeper pops up then open Security & Privacy preferences, click on the General tab, set the last radio button to Anywhere.

My i tunes library etc was on my old pc which crashed and died on me. i now have i tunes on my new pc but not sure how to sync my i phone to i tunes as it is telling me i have a library on another pc.....help

My old pc crashed. i have installed i tunes on my new pc but not sure y my i phone wont sync to it. its telling me i have an i tunes library on another pc.
how do i solve the prob of getting my old i tunes account up on this new pc and syncing my i phone????? pls

Please user the "search" field in the upper right corner of this page. This question is asked and addressed multiple times each day.

I'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4. It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition. Help!

'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4. It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition. Help!

Hi there 8472kck!
I have some information for you that can help you troubleshoot this issue a little further. That information can be found right here:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
and that information comes from this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

HT1937 my cellular data connection works in one location but not in another

Why does my iPhone's data connection work at other places but not at work?
It works sometimes.

Good question to ask your cell phone provider.. Maybe the material the building is made of is blocking the cellular data signal.

I'm trying to insert a new row, but not a whole row on a spreadsheet, but all i can seem to do is insert a full complete row? iPad Air Wi-Fi

I'm trying to insert a new row, but not a whole row on a pages app spreadsheet, but all i can seem to do is insert a full complete row?

What exactly are you trying to do? As I stated in your other thread, there is no such thing as a partial row.

HT4314 After updating my OS, I couldn't get onto my gamecenter account. I created a new nickname to see what would happen. Now I can only access my new nickname, but not my old one that has all my scores. My friends can still see my old nickname.

After updating my OS, I couldn't get onto my gamecenter account. I created a new nickname to see what would happen. Now I can only access my new nickname, but not my old one. However, my old account has all my scores! I want to delete the new nickname and re-access my old (i.e., original) nickname. Interestingly, my friends can still see my old nickname.
Any suggestions would be VERY appreciated! Thanks.

This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
This is a picture of what it looks like now:
http://tinypic.com/r/107quxu/7
As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
any way to get around that?

Which data format accepts MDM server

Hi All,
Which data format accepts MDM server. Suppose when we discuss about XI, It has own language XML, like that MDM have any own language?
And Where the XI helps to MDM consolidation?
Thanks,
Satish.

Hi Satish,
You can import XML (with or without schema), Excel or Access files into MDM or link directly to other databases (SQL or ODBC).
You will most likely need XI if you want to automate import processes into MDM. XI has to put the files to be imported into a specified directory so that MDM can pick it up. Also, XI is helpful for some data conversions that MDM can't do.
Hope this helps,
Christiane

I am looking at buying a new iMac but not sure if I need the Nvidia Geforce GTX 680 MX 2GB or put the money into Memory I will not be gaming

I am looking at buying a new iMac but not sure if I need the Nvidia Geforce GTX 680 MX 2GB or put the money into Memory I will not be gaming
New to the iMac and apple

Welcome to the Apple Support Communities
If you aren't going to use your Mac for anything special (Final Cut, Aperture, Photoshop, games...), you don't need that graphic card and you will save money.
Also, as it looks like you are going to buy the 27-inch iMac, I recommend you to buy the Mac with 8 GB of memory, and then, buy the memory that your iMac needs in OWC or Crucial (the iMac supports 32 GB of RAM) > http://eshop.macsales.com/shop/memory/iMac/2012_27/DDR3L
Doing this, you will save a lot of money. Also, it won't void the warranty of the Mac. If you need help installing the RAM, see > http://support.apple.com/kb/ht5540

Date format accepted in new table but not in active table for DSO, BI 7.0

Similar Messages

Maybe you are looking for