Date Format ignored after disconnect/reconnect

I don't know if anybody else gets this, or if it has already been posted, but I didn't see anything from my quick search...
I'm connecting to a database that is shut down for a scheduled backup. When it becomes available, I "reconnect" sql developer by reselecting the connection from the drop down box at the top of the worksheet toolbar. From that point forward, dates in query results will show up in 'dd-mon-yy', even though I have my format set to 'mm/dd/yyyy hh24:mi:ss'. It doesn't correct itself until i restart SQL developer.
I'm using SQL Developer Version 1.5.0.52, Build MAIN-52.03 on an XP Machine with jdk1.5.0_12.

There were issues with Preferences being saved in the early Adopter releases. Have you switched to 1.5 production yet?
Sue

Similar Messages

Date format disappears after 3 or 4 executions

Hi
My requirement is that i have to set my "current date" format as yyMMdd, setting this format is fine. It executes also normally with the desired output. After executing 3 or 4 times, the target format of my date ,ie yyMMdd disapears and hence the output is a blank. its a bit weird.
Any idea why this is happening.
Thanks in advance
Saiyog

Hi,
I beleive you are using Graphical mapping and Date is disappearing after producing the values for earlier occurences of field.
The only reason due to which it can happen is that you are not handling the context of occurence of source field. The occurence of source date should be equal to occurence of date field n target.
you may need to write some UDF or You can use SAP standard functions to achieve it.
Kulwinder
Reward if helpful

DA0005 date format error after install CHF17

Post Author: Akvile
CA Forum: Deployment
After installing chf17 I get the following error when trying to refresh reports, which require user to enter date in the condition prompt: DA0005 Connection or SQL sentence error Exception: DBD, [Sybase][ODBC Driver][Adaptive Server IQ]Cannot convert 1900-01-00 to a timestampState: 07006 our date format was yyyy.mm.dd now refreshing works only when entering date in yy.mm.dd format I have tried the following: - to reinstall Sybase IQ ODBC driver - to change date format in universe - to add InputDateFormat and InitDateFormat parameters to odbc.sbo files - to add registry entry to HKEY_LOCAL_MACHINE>SOFTWARE>Oracle NLS_DATE_FORMAT value YYYY.MM.DD (because it was such a reccomendation in BO 5.1 error guide for similar problem) Nothing helped. Any ideas? I have XI release 2, SP1, MHF1, Oracle 9 on clients, oracle 10 on server, sybaseIQ 12.7 middleware.

SP3 should include FP 2.5

Date format problem after Upgrade in BI

Hi Gurus,
We have just completed our upgrade of BI System to EHP1.
My users are facing a very typical problem.
Before the upgarde they could enter date while running a report in the following format:
20100215 in date variable (No slashes or dotd.)
After the upgrade they are forced to enter 2010/02/15.
If they don't enter slashes system does not accept that.
Any idea if we can rectify that somehow.
Regards

Checked in there alreday. Problem does not arise from there it seems.
I hope I am clear enough abt the problem.
Users are forced to type "/" between year month and day. Prior to Upgrade they did not need to type "/" between year month and day.
Edited by: Shalini Arya on Mar 17, 2010 2:45 PM

Date format Issue after HRSP Update

Hi,
We are faced with a strange issue after HRSP update was applied on our client system (upgraded from SAP-KE-30 to SAP-KE-36).
There is an outgoing interface which picks up all the the starters into the local government pension scheme and updates a B2A document. This is implemented via a z-program.
When we look at the out put after the interface has run for the vast majority of employees it shows their date of birth as 21.05.1968 when it should show it as 21051968. This only appears to have happen after the HRSP's have been applied.
No modifications have been made to the z-program. What could be the reason for this issue. has anyone faced such an issue post HRSP update?
Any pointers on how to further investigate and resolve the issue will be most helpful.
Regards

Hello Iside,
In this case we can try to reload the software on the BlackBerry Smartphone to make sure it is running the latest version and there are no issues with the OS on the device.
To do this we would need to back up the BlackBerry Smartphone. Please open the BlackBerry Desktop Manager and connect your device. Click on the Backup and Restore options and select Back Up. Please note the location where the backup is being saved as we will need to access it later to restore the BlackBerry Smartphone.
Once you have backed up your BlackBerry Smartphone please follow the link below to complete a clean reload of the BlackBerry Smartphone software.
Link: http://www.blackberry.com/btsc/KB11320
Please test the date once the software is reloaded prior to restoring the backup.
Thank you
-DrP
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Discoverer admin date format - ignoring NLS_LANG ?

Hi, can't find answers to this anywhere. is there anybody out there that can help?
Admin edition: Create a new folder from database, select a table containing date columns, and finish.
If you look at the properties for the date fields in the new folder the format mask is 'DD-MON-YYYY' regardless of what NLS_LANG is defined in the registry HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE.
we've currently got it set to English_France.WE8ISO8859P1 expecting dd/mm/yyyy. (also tried creating an NLS_DATE_FORMAT key under the same registry path).
The workaround at mo is to change the properties of each date field manually - very time consuming and prone to human error! Any suggestions?
Thanks in advance.

You have to create the key NLS_DATE_FORMAT at HKEY_LOCAL_MACHINE->SOFTWARE->ORACLE
Define your date mask there.
Fabio Back
[email protected]

Discoverer date format - ignoring NLS_LANG

Hi, can't find answers to this anywhere. is there anybody out there that can help?
Admin edition: Create a new folder from database, select a table containing date columns, and finish. If you look at the properties for the date fields in the new folder the format is 'DD-MON-YYYY' regardless of what NLS_LANG is defined in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE. (set to English_France.WE8ISO8859P1 expecting dd/mm/yy).
The workaround at mo is to change the properties of each date field manually - very time consuming and prone to human error! Any suggestions?

You have to create the key NLS_DATE_FORMAT at HKEY_LOCAL_MACHINE->SOFTWARE->ORACLE
Define your date mask there.
Fabio Back
[email protected]

HDMI does not come back after disconnect

Hello Archers,
this one is bugging me for a while now, perhaps someone has an idea.
I have a headless ARCH home server that mainly has the following purposes:
1. being a 24/7 file/backup/ssh server for family and friends
2. being an MPD server connected to my music system
The setup may seem a bit exotic. The computer is connected to the music system via HDMI over an S/PDIF audio extractor to the music system. This is because the machine replaced a RaspberryPi that really had crappy analog audio output and my music system has an optical input and can perform the digital to analog conversion itself. I have not installed Pulse just alsa and jack2-dbus.
aplay -l shows the following:
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: PCH [HDA Intel PCH], Gerät 0: ALC887-VD Analog [ALC887-VD Analog]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0
Karte 0: PCH [HDA Intel PCH], Gerät 3: HDMI 0 [HDMI 0]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
The Problem:
Whenever I switch off the music system and later switch it back on, the HDMI-connection is lost and does not get reestablished. I tried various things but essentially only a reboot of the machine helps (which opposes purpose 1 of the machine). On the RaspberryPi I did not have that problem, probably due to the hdmi_force_hotplug=1 in /boot/config.txt.
My Observations so far:
The first problem that made the sound disappear was the screen blanker on the console after 10 minutes. This can be prevented with
setterm --term linux --blank 0 >/dev/tty1 # You need write permission on /dev/tty1 for this to work!
There are no appearant error or warning messages when using e.g. aplay or speaker-test, just no sound at all
There are tipps in the forums/the internet sugesting to disable power management on the display involving xset and xrandr. However, I have no X running and the tools complain that they cannot find/open the display
In /proc/asound/PCH/codec#2 I find the HDMI codec to show the following as long as it is connected after a reboot:
Codec: Intel Valleyview2 HDMI
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862882
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3
Power: setting=D0, actual=D0
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Device: name="HDMI 0", type="HDMI", device=3
Converter: stream=8, channel=0
Digital: Enabled GenLevel
Digital category: 0x2
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3
Power: setting=D0, actual=D0
Node 0x04 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=01, enabled=1
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 2
0x02* 0x03
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560020: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x2, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 2
0x02 0x03*
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x80]
Pincap 0x09000094: OUT Detect HBR HDMI DP
Pin Default 0x58560030: [N/A] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D3
Power: setting=D0, actual=D0
Connection: 2
0x02 0x03*
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
After disconnect/reconnect it changes to this:
Codec: Intel Valleyview2 HDMI
Address: 2
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862882
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
N/A
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power: setting=UNKNOWN, actual=UNKNOWN, Error, Clock-stop-OK, Setting-reset
Invalid AFG subtree
I figured that the problem is probably related to powermanagement, so I experimented with powertop. This resulted in a reduced consumption of 1W when idle, which is nice but did not solve the original problem...
The Questions
Is there a way to completely reinit the HDMI subsystem just like on a reboot?
Is there an option comparable to hdmi_force_hotplug=1 on the pi that forces the HDMI signal to stay up?
Thank You for Your time!
Best regards,
Lars

I can confirm what zofiel said. I have tested it by connecting a TV and HDMI reactivitated by switching from X to console. However, this option only works one time and requires X running in the first place, which I usually have not on a headless server, but it made me think: Obviousely the X server needs to activate the graphics in the first place. Then I came up with an idea for a really messy work around. I could try to remotely start X. Normally, this is not possible and you get:
% startx
/usr/lib/xorg-server/Xorg.wrap: Only console users are allowed to run the X server
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
You can force it to work:
sudo startx
You get lots of error messages, but HDMI audio is back, even if one kills the X process afterwards with Ctrl+C (Audio stops, but resumes two seconds later). The downside is that starting X with sudo messes up permissions with the x related files in your home directory and you will have problems to use startx afterwards, so it is probably better to use su instead of sudo. If root does not have a properly configured .xinitrc file then one can also just execute the desktop environment directly e.g., for XFCE:
su - root -c "startxfce4"
Then kill it with Ctrl+C and you should have HDMI Audio working.
So now I could pack this in a script followed by some command to kill it, but, well, it is an ugly workaround
Is there really no better way?

System date format

hi all,
in my system i've date format in dd.mm.yyyy.
how can i change it to mm.dd.yyyy.

Hai Rahul,
System ==>User profile ==>Owndate==>defaults
In This U Have to Change U r Date format.
After Changing Just Log Off
So That From Next Time On wards Changes Will Be Affected.
Regards.
Eshwar.

ICloud mail does not reconnect in Mail application on MacBook Pro after disconnecting and reconnecting iPhone or after sleep

iCloud mail does not reconnect in Mail on my MacBook Pro after sleep or after disconnecting and reconnecting my iPhone. This only happens when I use my iPhone as a 3G-modem and not when I am on Wi-Fi. The only solution seems to be to quit the Mail-application and restart it again. Then Mail reconnects to iCloud.

Hi horstp,
Given your description of the issue (works on other Macs), it may be worth trying to set up that account by itself in a new test user on the iMac to see if it can be isolated to a user-specific file. You may find the following article helpful:
Apple Support: Isolating an issue by using another user account
http://support.apple.com/kb/TS4053
Regards,
- Brenden

Invalid date format after APEX upgrade

We are currently working on upgrading our applications from 1.6 to the new APEX 3.2 version. After the upgrade of one of our systems I have a tabular form that is returning the error 'Invalid date format found'. The date that is getting entered into the system is being displayed and choosed via a sql popup. The code for the pop up is
SQL CODE
create or replace view next_weeks as
with t as (
select
trunc(sysdate) + (rownum - 1) / 2 d
from
dual
connect
by rownum <= 28)
, call_info as (
select
c.call_identifier, c.callback_date, c.callback_cancelled
from uid_csr_schedule c
select
to_char(d, 'fmDy MM/DD/YYYY AM') l
, to_char(d, 'dd-mon-yy hh:mi:ss AM') v
,to_char(d, 'mm/dd/yy hh:mi:ss AM') o
from
t
where
((select count(callback_date) from call_info ci where ci.callback_date = t.d
and (ci.callback_cancelled is null or ci.callback_cancelled !='Y'))) <
(select csr_calls_per_period from uid_sch_system_default)
minus
select
to_char(d, 'fmDy MM/DD/YYYY AM') l
, to_char(d, 'dd-mon-yy hh:mi:ss AM') v
,to_char(d, 'mm/dd/yy hh:mi:ss AM') o
from
t
where
(select count(callback_date) from call_info ci where ci.callback_date = t.d
and (ci.callback_cancelled is null or (ci.callback_cancelled !='Y')))
=(select override_amt from uid_sch_call_override
where (to_char(begin_date,'dd-mon-yy') || ' ' || upper(period)) = to_char(t.d, 'dd-mon-yy AM'))
union select
to_char(d, 'fmDy MM/DD/YYYY AM') l
, to_char(d, 'dd-mon-yy hh:mi:ss AM') v
,to_char(d, 'mm/dd/yy hh:mi:ss AM') o
from
t
where
((select count(callback_date) from call_info ci where ci.callback_date = t.d
and (ci.callback_cancelled is null or ci.callback_cancelled !='Y'))) >=
(select csr_calls_per_period from uid_sch_system_default)
and
(select count(callback_date) from call_info ci where ci.callback_date = t.d
and (ci.callback_cancelled is null or (ci.callback_cancelled !='Y')))
<
(select override_amt from uid_sch_call_override
where (to_char(begin_date,'dd-mon-yy') || ' ' || upper(period)) = to_char(t.d, 'dd-mon-yy AM'))
order by o
The form then has the item set as a popup with a date format mask of dd-MON-yy hh:mi:ss AM. The popup displays fine and the date is shown in the field but the error is received when I try to save the information. If I change the application global setting of date format mask to dd-MON-yy hh:mi:ss AM then this error goes away however, it creates problems on all the rest of my pages that use this date in the where clause of the queries. Is there a way to solve the problem above without having to change the globalization parameter or do I need to change this parameter and then redo those queries?
Thanks for your help!
Amber

Amber,
It's interesting that the problem goes away if you set the global date format to be the same as the column level. The column level should trump the global setting. What process is returning the error? Are you sure it's the MRU or could it be something custom?
You could consider adding a process before the MRU fires that uses alter session to change the date format.
Regards,
Dan
Blog: http://DanielMcGhan.us/
Work: http://SkillBuilders.com/

Data Server Disconnects/Reconnects

We are using xMII 11.5, java j2sdk1.4.2_18 and SQL server 2005. Sometimes we have unintentional database disconnects, relating to problems with SQL, unexpected server shut-downs, possibly network issues, etc. Sometimes when the database comes back-online, xMII can reconnect to the database, other times not. When we fail to connect automatically, cycling the ServletExec-xmii service (and java) frequently fixes the problem, but not always. If that fails, we have to reboot the xmii server.
How can we make lost Data Server connections more reliably reconnect?
Thanks,
Mike

-     Our version is 11.5.4 b73, using java plugin 1.5.0_06
-     A typical cms entry looks like this:
2010-01-23 21:28:17,139 [LHScheduler-Remove_MU] ERROR ConnectionHolder - Unable to get a connection from the pool
java.sql.SQLException: [TDS Driver]A timeout occured while trying to login. Use DriverManager.setLoginTimeout() to increase the timeout or check your server. The timeout is currently set to 15000 ms.
     at com.inet.tds.TdsDriver.connect(Unknown Source)
     at java.sql.DriverManager.getConnection(DriverManager.java:512)
     at java.sql.DriverManager.getConnection(DriverManager.java:171)
     at com.lighthammer.Illuminator.tools.database.ConnectionPool.createConnectionObject(Unknown Source)
     at com.lighthammer.Illuminator.tools.database.ConnectionPool.getConnectionObject(Unknown Source)
     at com.lighthammer.Illuminator.tools.database.ConnectionHolder.getConnection(Unknown Source)
     at com.lighthammer.Illuminator.connectors.IDBC.IDBC.processRequest(Unknown Source)
     at com.lighthammer.Illuminator.services.handlers.IlluminatorService.processRequest(Unknown Source)
     at com.lighthammer.Illuminator.services.ServiceManager.runQuery(Unknown Source)
     at com.lighthammer.Illuminator.servlet.Illuminator.service(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.lighthammer.Illuminator.servlet.ServletRunner.run(Unknown Source)
     at com.lighthammer.Illuminator.servlet.ServletRunner.runAsXmlQuery(Unknown Source)
     at com.lighthammer.xacute.actions.illuminator.queries.IlluminatorQueryObject.LoadDocument(Unknown Source)
     at com.lighthammer.xacute.actions.illuminator.queries.IlluminatorQueryObject.Invoke(Unknown Source)
     at com.lighthammer.xacute.core.Action.Process(Unknown Source)
     at com.lighthammer.xacute.engine.TransactionEngine.Process(Unknown Source)
     at com.lighthammer.xacute.core.ActionSequence.Process(Unknown Source)
     at com.lighthammer.xacute.engine.TransactionEngine.Process(Unknown Source)
     at com.lighthammer.xacute.engine.TransactionEngine.Execute(Unknown Source)
     at com.lighthammer.Illuminator.gui.scheduler.XacuteWorker.execute(Unknown Source)
     at com.lighthammer.cron.Task.run(Unknown Source)
-     Yes, I have a validation query (SELECT GETDATE()).
-     Disabling/enabling usually doesnu2019t work, as the u201CStatusu201D window just hangs when opened.
Thanks,
Mike

Date Formatting for characters like st/nd/rd/th after the Date

JDK provided so many features for date formatting but i would like to know how can we achieve date in below format
11th May 2009 (i want to know how to get "th" part of this).
I can calculate this by writing code for it but is their any kind of inbuilt feature in JDK to achieve it.
1*st* - How to get st?
2*nd* - How to get nd?
3*rd* - How to get rd?
4*th* - How to get th?
In some languages, there are variables like S available to get this but i do not think it is available in JDK.

prakashkamani wrote:
Wonder why is JDK not having this.If you wanted to do it in Java, you would have to have a properly internationalized solution. At least you would if you wanted it to be in the JRE. That would involve all kinds of questions that you haven't thought about, since your requirement is only for English.
I'm willing to bet that the page you linked to only works for English too.

Problem with date format parameter in SSRS2012 after migration from SSRS2008

Hello,
We are migration from
Reporting Services 2008 on Windows 2008 server
to
Reporting Services 2012 with Always On on Windows 2012 server.
I have a report that expects a date in the querystring: "...&DateTo=17/09/2014"
This use to work in the previous environment and now fails !
I logged onto the server with the credentials that runs SSRS and changed its regional settings to French(France): It didn't helped.
I tried passing in the date otherwise "...&DateTo=09/17/2014": it worked !
I tried changing the regional settings in my IE and it worked but that can't be a solution... it is still working on my Windows 2008 server... unless there is a statement from Microsoft that it explains that now it works only like this but I would be surprised... is it ?
I also saw that changing a directive in the web page can help but, why did it stopped working, is it the handling of a default value for regional settings that changed in SSRS ?
I would need help to understand this, thank you for any help you can provide.
Regards,
Claude VERNIER

Hi Claude,
Based on my research, SQL Server doesn’t supports DD/MM/YYYY date format. When we insert “17/09/2014” value in a date type column, it pops up an error message that “String was not recognized as a valid DateTime”. It means that the value “17/09/2014” is acted
as “2014/17/09” string. So in your scenario, we cannot get the expect results.
To work around this issue, we should change it to “09/17/2014”.
Reference:
Date and Time Data Types and Functions (Transact-SQL)
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

My iPhone 4S suddenly stopped synching with my Outlook after I downloaded latest updates. I get this message: iTunes unable to load provider data from Synch Services. Reconnect or try later. What to do?

My iPhone 4 suddenly stopped synching to my Outlook 2010. This may be a result of downloading the recent iPhone and iTunes updates. I get this message: "iTunes unable to load provider data from Sync Services. Reconnect or try later." Another message tells me to delete the back up data on my computer as it is corrupted. I cannot locate this back up data. What should I do?

got that once a reboot and it was fine again

Date Format ignored after disconnect/reconnect

Similar Messages

Maybe you are looking for