Date format in Master inspection characteristics

Hi All
I have a requirement where my user wants to enter the date format in the master inspection characteristic. For example we want to add date of manufacture and the date of expiree as a inspection characteristics and during the results recording they want to enter this characteristics in a date format.
MY question is can we have a master inspection characteristic with a date format, if so what all the settings are required.
Please suggest.
Thanks,
Quantum.

>
quantum wrote:
>Can i use characteristics in the inspection plan instead of the master inspection characteristics. I am using Work bench transaction code CWBQM to create an inspection plan.
Direct characteristic you can't use in inspection plan. If you want to use characteristic in IP then create chara. (CT04), then assign this charac. as class chanr.(QS21) in MIC. Now you can use this MIC in inspection plan.
Hope this helps.
Thanks!!!

Similar Messages

  • Config settings for Decimal places in Master Inspection Characteristics

    Hi,
    can any body tell me where to do the configuration settings for decimal places  in master inspection characteristics
    i want my limits to be 1.234
    i want 3 decimals after point
    Regards,
    Raj

    Hi,
    Please go through the below link.
    http://www.freesaptutorial.com/how-to-create-master-inspection-characteristic-in-sap-qm-module/
    While creating the MIC in QS21 after entering the control indicators you will get Quantitative data screen.
    In that screen you can enter the decimal places, UOM, target, lower limits etc
    Regards
    Hari

  • Date format in Master Folder not consistent

    Tonight, I found some old cell phone pics from 2 years ago sitting in a folder on my desktop (was never imported to iphoto). So I went ahead and imported them. In iphoto, the newly imported old pics went to the correct locations (amongst the 2009 photos). That's great. But, when I go to those photos and hit "reveal in finder," I notice that the original files have been copied into today's folder, as if the pictures were just taken today. I was hoping they would go into the folders from 2 years ago where they belong. What gives?
    Also, I don't know why, but the date format in my Master Folder just got screwy. When I do column view, one column will only have the years. So for 2011, it says I have 24 folders. Of those 24 folders belonging to 2011, 23 of them have actual dates as their name (eg: "July 26, 2011" or "February 16, 2011"). However, one lonely folder simply has "08" (meaning "August"), and when I click on it, it reveals the dates of the month within August 2011 as separate folders, so folders with digits for names indicating the date of import (eg: "18" or "23" or "25"). So those cell phone pics from 2 years ago that I just imported today are showing up in the folder reflecting today's date. Again, what gives???

    There is no correlation between the placing of files on the HD and the Events in the iPhoto Window and there hasn't been for three versions of iPhoto now.
    There is no support for user acess of the files within the Library Package. It's not designed for that. There's also no need for it. See below for more.
    FWIW, current versions of iPhoto use folders based on the date and time of import. Some earlier versions based it on the date and time of the photos. Even earlier versions used date and time of import.
    Simple tip: Don't change anything in the iPhoto Library Folder via the Finder or any other application. iPhoto depends on the structure as well as the contents of this folder. Moving things, renaming things,, deleting them or otherwise making changes will prevent iPhoto from working and could even cause you to damage or lose your photos.
    There are many, many ways to access your files in iPhoto:   You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    There's a similar option in Outlook and many, many other apps.  If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    If you want to access the files with iPhoto not running:
    For users of 10.6 and later:  You can download a free Services component from MacOSXAutomation  which will give you access to the iPhoto Library from your Services Menu.
    Using the Services Preference Pane you can even create a keyboard shortcut for it.
    For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    Show File:  a. On iPhoto 09 and earlier:  Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.    3.b.
    b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

  • T. Code for Master Inspection Lot

    Dear Friend
    Through which transaction code I can create master inspection characteristics for a material?
    Cheers
    Chandra

    Hi Dear
    Check this Tcode QS21---->Create master insp. characteristic
    Regards
    Ranga

  • How do you create Inspection Characteristics?

    Hello there,
    I had a question.. How do you create Master inspection characeteristics?
    Is there a specific Tcode for this?
    Are any other assignments needed for this?
    Any help would be highly appreciated.
    Sincerely,
    Aji Kurian Mani

    Hi,
    You can create Master Inspection Characteristics ( MIC ) with T-code QS21 or use this path
    SAP Menu-LogisticsQuality ManagementQuality PlanningBasic DataInspection Characteristics--Create(QS21)
    1.Goto T-code QS21
    2.Enter Plant & desired code for MIC,then Enter.
    3. Here tick for Quantitative Characteristic or Qualitative Characteristic.
    4.Maintain control Indicator,catalog,Inspection method,Status,short text,search field.
    Then Assign MIC in inspection plan.
    Regards.
    Raja.

  • Difference between Characterstics and Master Inspection Characterstics??

    Could some please explain me the difference between characterstics and Master inspection Characterstics?
    How do you create a new master inspection characterstics?

    Classification and Characteristics are cross-application functions ( [SAP Help|http://help.sap.com/saphelp_erp60_sp/helpdata/en/dd/ae56614bb411d192f20000e829fbc6/frameset.htm] ) used in many areas of SAP such as:
    - Equipment
    - Functional location
    - Notification
    - Task lists
    - Materials
    - QM master inspection characteristics
    - Sales orders
    - Etc
    PeteA

  • Combining Master inspection charac. of HALB & FERT in a Quality Certificate

    Dear Experts,
    material A (halb) with Inspection Plan1 produced  material B (fert) with inspection plan 2. Some of the Master Inspection Characteristics maintained in inspection plan 1 are not in inspection plan 2. I intend to create a Quality Certificate for material B (fert). How do i pick some charateristics from insp plan 1 (which is assigned to halb material A)  to display in addition to charateristics from insp plan 2 (assigned to fert material B). Characeristics from fert diplays in my Quality Cert, but how do i incorporate characteristics from the halb?

    You do this in the certificate profile.  Click on the button on the menu bar labelled "Materials".  In here you define what materials the system should look for to find the relevant batches or inspection lots.
    For this functionality to work, you must have the batch where used functionality set up.  I recommend having the batch where used list update in real-time rather then in batch.
    FF

  • Date format in user master record cannot be interpreted

    When running an Infopackage from BW to an R/3 customer extractor, the R/3 job cancels with this error message, "Date format in user master record cannot be interpreted". I can restart the R/3 job program from the ABAP editor screen using the same variant that BW issued and the job runs without cancelling.
    NOTE: This process runs without any errors on our QAS system.
    Any idea what causes this error message and how I can fix it?

    Hi Alan,
    I have resolved this issue by myself. Same just like yours mine is also a custom Datasource.
    Solution for this is go to source system check your Background user id i.e like BWALEREMOTE or ALEREMOTE which ever id you have created for setting up RFC connection between R/3 & BW. Check your Date format which has been set for your background user. Use the second format mm/dd/yy. Then run your extraction you will not face any problem.
    If you still have any problem do let me know. If this solution helps you assign points.
    Regards,
    Bhuvana.

  • Inprocess inspection characteristics missing

    Dear all
    i assigned 03 inspection to a material but forgot to assign inspection characteristics, lot has been created at the time of the creation of production order. now i want to do the inspection but there is no assigned characteristics. i have assigned characteristics to that material in routing but how to get the effect on that lot to get the characteristics without changing order
    is there any option plz guide me

    Dear Nasir,
    You have to try to read the Production Order master data through Production Order --> Functions --> Read Master Data. This is the way you can reset your lot Because In process inspection lot is attached with Production / Process Order. Other wise cancel the production order and create the new one. I hope this will work.
    Best Regards,
    Ibne Khalil

  • Create Time Master Inspection Characteristic (MIC)

    Hi all,
    Pls tell me how to create an time based mic (Inspection Charactsrstic) where the Format of the values should be 00.00 ..12.00
    I tried creating it with 2 decimal places but the result is like 0.00 and 12.00,the first digit is being deleted
    your help is appreciated
    Regards

    Dear colleague,
    the two types of characteristics of the standard SAP are
    qualitative  (for example, "product color") or
    quantitative (for example, "material density").
    Please see the online-documentaion:
    http://help.sap.com/saphelp_47x200/helpdata/en/61/
    2db434d6e3681ae10000009b38f83b/frameset.htm
    There is no possibility to convert numrical fields into date in
    results recording. Your request might reachable using classification
    of characteristics. Please see the following online-documentaion:
    http://help.sap.com/saphelp_47x200/helpdata/en/ec/
    62ab0a416a11d1896d0000e8322d00/frameset.htm
    under
    Entering Basic Data / Format / Data Type: Time Format/Date Format
    Thank you for contacting
    Maria

  • MRP Out Put  Schedule lines date format to month

    Hi Friends,
    I am working on SAP4.7 Version.
    I have maintained all the relavent MRP datas in material master.
    Like MRP type - PD,
    Lot Size- MB ( Monthly Lot size).
    I have created planned independent requirement in MD61 monthly wise for that material.
    I have given Schedule agreement number in Source in List with MRP indicator - 2.
    I am running MRP for a material with MD02 with MRP parameter Delivery schedules -3 (Schedule lines) .
    The MRP running succesfully and creating delivery Lines with delivery dates.
    But the requirement by the client is..
    The delivery lines should be generated in month wise.
    How to convert the schedule lines generated in day format to Month format in MRP run out put?
    While creating schedule lines with ME38. we have option to select the day format / month format/ week wise?
    But the MRP out put always generated in date wise?
    Any one knows what changes i should make?
    Guide me ..
    Thanks & Best Regards
    Giri

    Hai Boss
              Can you throw some light , how you set default mrp indicator month wise with the help of ABAPER.
    My client requirement also same like you. Yours is month, mine is week. Pl help me out.
    regards
    ssp

  • Error while creating Data Source for master data attributes

    Hi BI Experts,
    Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
    I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
    Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as   ,
    and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is  MAT_NUMBER and MAT_NAME (with say 100 data in the file)
    same is the result when I am trying to load the text data too columns maintained are
    (LANGUAGE MAT_NUMBER Short Description)(same 100 data).
    now i used to rsa1old transaction  to upload the file using 3.5 version.i created info source for master data/text/hierarchies for  IOSP_Mat
    now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
    When I monitored ,I figured the data has not been even uploaded to the PSA level.
    Can you BI experts tell me the answer for this.
    Thanks,
    Srijith

    apologies to all of you for late response,
    was busy with some other activities.
    I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
    Thanks again for your quick response.
    Once again sorry to all of you for my late response
    Thanks,
    Sri

  • Date format mask in Enter-Query mode

    Hi,
    I'm developing a Form which is able to query the masterblock from a detail-item.
    The queryable detail-item is a date field and has a datatype: DATETIME. When a new record is entered the values in the date field are stored in the database like "18-10-2002 15:04:02"
    When the form is in enter_query mode the user must be able to enter 18-10-2002 (DD-MM-YYYY format mask, so without time mask). When execute the query with this date format the query is not able to find data.
    I used a Key-Execute-Query on the detailblock like this:
    SELECT 1.COLUMN
    , 2.COLUMN
    INTO :1.COLUMN
    , :2.COLUMN
    FROM TABLE.1
    , TABLE.2
    WHERE 1.COLUMN = 2.COLUMN
    AND TO_CHAR(1.COLUMN,'dd-mm-yyyy') = to_date(:avg.datum,'dd-mm-yyyy');
    Can anyone please help me?
    Regards,
    Ronny.

    Hi Ronny,
    I'm not sure to have got exactly your issue (especially why you have to use that select in master-detail query), but I suggest you to substitute
    ...AND TO_CHAR(1.COLUMN,'dd-mm-yyyy') = to_date(:avg.datum,'dd-mm-yyyy');
    with
    ...TRUNC(1.COLUMN) = TO_DATE(:avg.datum,'dd-mm-yyyy');
    To be fair, I would use it in the where clause, even if you set it dinamically.
    Let us know,
    Marco

  • Saving rights and date format in Forms - Acrobat Professional 8

    Hi Forum,
    I have designed a form for a client in Acrobat 8 Professional, and enabled viewing rights in Reader. There will be a lot of people using this form that are not in any way computer literate, and the client has requested that I do the following:
    1. I have set up the date format (in a date-of-birth field) to dd/mm/yy, limited to 8 characters, and a Tool-tip explaining how the date must be written. However, if you enter the date by mistake as 01/01/2001, it will be allowed, and appear as 01/01/20 (instead of coming up with an error message saying the 20 is wrong and it should be 01). I understand that to the form, there's nothing wrong with this date, but is there any way I can get a pop-up box to appear if either '19' or '20' appears as the year, and indicate to the form-filler that they should check what they've entered?
    2. They want the user, when the document is opened in Reader, to NOT be allowed the 'Save' feature, but only allow them to 'Save AS', so as not to overwrite the master document, which will be stored in a folder. The information in these forms are of a sensitive nature, so they don't want it getting saved by accident into the master document for anyone to see.
    I would be delighted if you were able to give me any ideas on the above.
    Kind regards,
    Liz

    For #1, you can, but it would involve some custom JavaScript programming to replace what Acrobat uses as the Keystroke/Format scripts.
    For #2, you cannot set up the document or Acrobat (Reader) to prevent a Save but allow a Save As. The best way to do what you want is to set up the appropriate file permissions using the OS's file system to prevent users from changing the file. A quick & dirty way is to simply set the file to read-only, but this is often easy for a user to undo.
    George

  • Convert Oracle date format masks to Java format masks

    Have an application based on Oracle that stores data in text form (for display) and in native date format. It is being migrated to another application with a Java based front end that can only use Java format masks to display the dates in the desired display format.
    Is there a way to translate the Oracle format masks to Java? I can do this in SQL or PL/SQL using the database or in Java.
    I really don't want to write detailed code to parse the masks, although if parsers are available to take an oracle mask into its metadata (minute, year, etc), it may be possible for me to write the code.
    This seems like something that must have been done many times over the years. I would prefer to reuse workable code rather than reinventing the wheel.
    To be clear, I do not need to alter data or convert dates shown in string form. Just the format masks so the new app will display dates in the same manner as the old app. Fortunately, both apps handle interpreting the format masks in their native technology, so it is just converting the format mask.

    kenmadsen wrote:
    Both applications have a varchar2 column and a date column. A date picker selects and returns the date in native format for storage and the application uses the mask to format the varchar2 column for display (and storage). The old application uses an Oracle date format mask DD-Mon-YYYY HH24:MI and the new application uses Java date masks (DD-MM-YYYY hh:mm). (I may not have the translation from HH24 to hh correct).
    The date column and the display column store the same information (a date), but one is stored natively and the other is displayed as the application administrator want the particular row to be formatted for display. (the mask is a column in the same table as the other 2 columns). Each row has characteristics (other columns) that determines what the data is and how it should be shown (some things need to show time; others only the date)
    So the problem is, when migrating, the new application cannot render the dates as the old app did because "Mon" is Oracle format, not Java format.
    No data is being converted in the migration, except for the mask itself. Both applications have the same record structure with respect to these columns and they both use the mask to generate the formatted varchar2 data for display in the application and storage.too bad you insist on try to describe with words rather than actual CODE.
    Please explain again why this is an Oracle problem & NOT a Java problem?
    Oracle RDBMS is a data repository & can't automagically change data content for you.

Maybe you are looking for