Date format in the body of the email that is sent to customer

With regard to the Salesforce Integration configuration: In the "Agreement Template" under  "Agreement Information " The body of the message I have the date being read into the body of the email message to the client using the Salesforce Contract Start & End Date in the following format:
I am pleased to offer your agency an agreement from {!Current_Contract_Start__c} to {!Contract_End__c}.
This however outputs as:
I am pleased to offer your agency an agreement from 2014-09-23 00:00:00 to 2015-11-30 00:00:00.
What is the proper syntax to format it as mmm, dd, yyyy with no timestamp?

It's how salesforce parses the date. Your source date field needs to apply the same formulas as discussed here:
https://forums.adobe.com/thread/1138911

Similar Messages

  • I have just subscribed for a monthly billing for my acorbat pro XI, the problem is i have clicked on the link on the email that have sent me to activate it but its still not allowing me to acess this and see my PDF's

    i have just subscribed for a monthly billing for my acrobat pro XI, the problem is i have clicked on the link on the email that have sent me to activate it but its still not allowing me to acess this and see my PDF's, how to i activate my new license?

    Can you explain the problem in more detail - "not allowing me to access" isn't clear to me. If you get any errors, please give the full wording. If you just don't seem to have any useful functions under TOOLS, make sure you are NOT still running Adobe Reader.

  • HT5622 I want to check the emails that are sent to my Apple ID, is that possible? If so, how?

    I want to check the emails that are sent to my Apple ID, is that possible? If so, how? I have an important message to read and it was sent to my Apple ID account at @me.com

    There are no IDs that end in apple.com.  There are mac.com, me.com, and icloud.com.

  • The email that Itunes sent a password change no longer exists

    How do I access a password change of my account if the email attached to it no longer exists?

    If you can remember the answers to your security questions then you should be able to reset it by answering them : http://iforgot.apple.com
    If not then you will have to contact Support in your country to get it reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699
    When it's been reset you can then update the email address on your account - the primary email address you can update by logging into the account via the Store > View Account menu option on your computer's iTunes, rescue email address via http://appleid.apple.com : Manage your Apple ID primary, rescue, alternate, and notification email addresses

  • Hi I really want to change my security questions because I don't remember the answers and I go to send a email for the instructions but I don't receive the email that I sent so what should I do

    Pleas help

    Hi Aaronpadilla2810,
    Thanks for visiting Apple Support Communities.
    It sounds like you're following the right steps to reset your security questions, but you do not receive the rescue email. In a case like this, you can contact iTunes Store Support for help:
    You'll need to contact iTunes Store support to have your questions and answers reset.
    From:
    Rescue email address and how to reset Apple ID security questions
    http://support.apple.com/kb/HT5312
    All the best,
    Jeremy

  • I sent an email from a Mac. However when I check my email account it doesn't show the email that I sent from the Mac. Did it actually send?

    My email account is Yahoo if that matters.

    If you went through the wizard to set up your email, it's probably set to POP, then.
    I found this article with instructions, and it doesn't make any mention of IMAP.
    What this means is that messages you send from your Mac (using Mail on your Mac or iPhone), will not show up when you check your email on the web.
    You will probably also notice that messages you read on your Mac (again, using Mail) won't show up as read when you check your email using Safari or another web browser.
    ~Lyssa

  • Error with the data format in the TXT file, sending as an Email attachment

    Hi all,
    I have an problem in the data formating in the TXT file while sending as an attachment via an email by using the FM "SO_DOCUMENT_SEND_API1".
    For eg:
    The data in the TXT file is looking like as follows:
    0 0 0 0 2        L O U D S P E A K R   O T H E R   3 8 W h i t e                  0 0
    0031  L O U D S P E A K R   O T H E R   3 8 Black                               0 000
    38    L O U D S P E A K R   O T H E R   3 8 Brown                                  0 00040
    L O U D S P E A K R   O T H E R   3 8 Brown                                         0 00042
    and so on
    But it should come as :
    0 0 0 0 2  L O U D S P E A K R   O T H E R   3 8 W h i t e
    0 0 0031   L O U D S P E A K R   O T H E R   3 8 Black
    0 00038    L O U D S P E A K R   O T H E R   3 8 Brown
    0 00040    L O U D S P E A K R   O T H E R   3 8 Brown
    All the internal tables are correctly filled.
    The code is as follows:
    gwa_objtxt = 'Please find attached DATA EXTRACT Sheet'.
      append gwa_objtxt to git_objtxt.
    describe table git_objtxt lines gv_cnt.
      clear git_doc_data.
      read table git_objtxt index gv_cnt.
      git_doc_data-doc_size = ( gv_cnt - 1 ) * 255 + strlen( gwa_objtxt ).
      git_doc_data-obj_langu = sy-langu.
      git_doc_data-obj_descr = lv_mtitle.
      append git_doc_data.
      clear git_packing_list.
      refresh git_packing_list.
    git_packing_list-transf_bin = space.
      git_packing_list-head_start = 1.
      git_packing_list-head_num = 0.
      git_packing_list-body_start = 1.
      git_packing_list-body_num   = gv_cnt.
      git_packing_list-doc_type = 'RAW'.
      append git_packing_list.
      Clear : gv_cnt.
      Describe table git_objbin lines gv_cnt.
      git_packing_list-transf_bin = 'X'.
      git_packing_list-head_start = 1.
      git_packing_list-head_num = 1.
      git_packing_list-body_start = 1.
      git_packing_list-body_num = gv_cnt.
      git_packing_list-doc_type = 'TXT'.
      git_packing_list-obj_descr = 'ATTACH.TXT'.
      git_packing_list-obj_name = 'book'.
      git_packing_list-doc_size = gv_cnt * 255.
      APPEND git_packing_list.
      clear git_receivers.
      refresh git_receivers.
      git_receivers-receiver = gv_eid.
      git_receivers-rec_type = 'U'.
      append git_receivers.
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          DOCUMENT_DATA              = git_doc_data
          PUT_IN_OUTBOX              = 'X'
          COMMIT_WORK                = 'X'
        TABLES
          PACKING_LIST               = git_packing_list
          CONTENTS_BIN               = git_objbin
          CONTENTS_TXT               = git_objtxt
          RECEIVERS                  = git_receivers
        EXCEPTIONS
          TOO_MANY_RECEIVERS              = 1
          DOCUMENT_NOT_SENT                = 2
          DOCUMENT_TYPE_NOT_EXIST      = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR                    = 5
          X_ERROR                                      = 6
          ENQUEUE_ERROR                        = 7
          OTHERS                                        = 8.

    please give the code of
    contents bin =  git_objbin " how  this is getting populated.
    0 0 0 0 2 L O U D S P E A K R O T H E R 3 8 W h i t e <b>0 0</b>
    0031 L O U D S P E A K R O T H E R 3 8 Black
    0 000
    38
    from this im not able to understand is this over population or concatenation problem
    y dont u make a append to the final table
    like
    data : begin of itxt occurs 0, ,
    s1(132) type c ,
    end of itxt.
    loop at itab.
    itxt-s1+0(4) = itab-f1.
    itxt-s1+4(6) = itab-f2.
    itxt-s1+10(8) = itab-f3.
    itxts1+18(4) = itab-f4.
    append itxt.
    clear itxt.
    endloop.
    exchange this to the contents bin of hte Fm .
    regards,
    vijay.
    can u please mail the text file and the expected o/p to my mail id [email protected]  so that i can see the same from the data provided i m not able to check the result properly .

  • How to get the Date format inside the table

    I have a startdate column in the db in the format May 5, 2001 12:39:00 PM, when I query it from a view in this way : SELECT startdate, ... FROM ..., it returns the format in the db,
    However I have to do this SELECT
    decode(startdate, null, 'NOT START'), startdate), ... the result is 5-MAY-01,
    then I tried this to_char(startTime, 'Month DD, YYYY HH:MI: A.M.') the results become May 05, 2001 12:39:00 PM. (more space between month and day, and 05 instaed of 5)
    Does anybody know how to fix this, so I get exactly what is in the db?
    Thanks in advance

    No matter what you do if you are storing a date in a column it will get stored in the Oracle's internal 7 byte date format.
    The way you get it on retreiving it is as set by your date format. You can either change the default date format for the instance, the individual session or the individual SQL statement(in this case using to_char(date, 'format')).
    If you want to store the date in a format you want to store you'll have to store it as char or varchar2.
    <BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by George ([email protected]):
    I have a startdate column in the db in the format May 5, 2001 12:39:00 PM, when I query it from a view in this way : SELECT startdate, ... FROM ..., it returns the format in the db,
    However I have to do this SELECT
    decode(startdate, null, 'NOT START'), startdate), ... the result is 5-MAY-01,
    then I tried this to_char(startTime, 'Month DD, YYYY HH:MI: A.M.') the results become May 05, 2001 12:39:00 PM. (more space between month and day, and 05 instaed of 5)
    Does anybody know how to fix this, so I get exactly what is in the db?
    Thanks in advance<HR></BLOCKQUOTE>
    When you do to_char() with 'month' oracle blank pads the month to nine characters, the same goes with day too. So to get rid of it you'll have to trim() the month. And if you want to get a single digit for date less than 10 instead of 0x you'll have to do a bit of extra jugglery using translate() or replace().
    Hope this helps
    Naveen

  • Problem with SQL*Loader and different date formats in the same file

    DB: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    System: AIX 5.3.0.0
    Hello,
    I'm using SQL*Loader to import semi-colon separated values into a table. The files are delivered to us by a data provider who concatenates data from different sources and this results in us having different date formats within the same file. For example:
    ...;2010-12-31;22/11/1932;...
    I load this data using the following lines in the control file:
    EXECUTIONDATE1     TIMESTAMP     NULLIF EXECUTIONDATE1=BLANKS     "TO_DATE(:EXECUTIONDATE1, 'YYYY-MM-DD')",
    DELDOB          TIMESTAMP     NULLIF DELDOB=BLANKS          "TO_DATE(:DELDOB, 'DD/MM/YYYY')",
    The relevant NLS parameters:
    NLS_LANGUAGE=FRENCH
    NLS_DATE_FORMAT=DD/MM/RR
    NLS_DATE_LANGUAGE=FRENCH
    If I load this file as is the values loaded into the table are 31 dec 2010 and 22 nov *2032*, aven though the years are on 4 digits. If I change the NLS_DATE_FORMAT to DD/MM/YYYY then the second date value will be loaded correctly, but the first value will be loaded as 31 dec *2020* !!
    How can I get both date values to load correctly?
    Thanks!
    Sylvain

    This is very strange, after running a few tests I realized that if the year is 19XX then it will get loaded as 2019, and if it is 20XX then it will be 2020. I'm guessing it may have something to do with certain env variables that aren't set up properly because I'm fairly sure my SQL*Loader control file is correct... I'll run more tests :-(

  • How do I set a custom time & date format in the top bar?

    Hello guys,
    Very embarassing question, because I've had Apple's for all of my life (starting with the original Apple Macintosh) but I still haven't figured out one thing
    How do I set a custom time & date format in the top bar?
    When I go to System Preferences > Language & Text > Formats I can set different formats. I have no idea where you will see these, but I know that it's not the top bar where the time and date is being displayed. Because no matter what I enter, the format in the top bar will stay the same. I can only choose things like 24-Hour clock or not, blinking dots and so on in the Time & Date settings from the System Preferences.
    Can anyone here point me in the right direction? I see you can even choose to display the week of the year - I'd love to do that!
    All help appreciated!
    Greetings

    Language & Text system preferences, Formats tab, customize dates.
    There are also many third party menu item utilities that can.  Search Macupdate.com for some.
    One search yielded iClock Pro.  Although I never used it I would think it allows customization.  The link I gave you is to the Macupdate download page for that app.  On that same page is a Similar Software section which has other apps that can do the same thing. 
    One listed is iStat Menus.  The primary use for iStat Menus is not for displaying date/time but it does do that.  And I know it can do what you want because I use iStat Menus to track temperature sensors n my machine and, like you, I want to customize the menu time/date.  So I use it instead of the apple clock.  It does have the customization features I think you are looking for.

  • How to handle Multiple date formats for the same date field in SQL*Loader

    Dear All,
    I got a requirement where I need to get data from a text file and insert the same into oracle table.
    I am using SQL*Loader to populate the data from the text file into my table.
    The file has one field where I am expecting date date data in multiple formats, like dd/mon/yyyy, yyyy/dd/mon, yyyy/mon/dd, ,mm/dd/yyyy, mon/dd/yyyy.
    While using SQL*Loader, I can see Loading is failing for records where we have formats like yyyy/dd/mon, yyyy/mon/dd, mon/dd/yyyy.
    Is there any way in SQL*Loader where we can mention all these date formats so that this date data should go smoothly into the underlying date column in the table.
    Appreciate your response on this.
    Thanks,
    Madhu K.

    The point being made was, are you sure that you can uniquely identify a date format from the value you receieve? Are you sure that the data stored is only of a particular limited set of formats?
    e.g. if you had a value of '07/08/03' how do you know what format that is?
    It could be...
    7th August 2003 (thus assuming it's DD/MM/RR format)
    or
    8th July 2003 (thus assuming it's MM/DD/RR format)
    or
    3rd August 2007 (thus assuming it's RR/MM/DD format)
    or
    8th March 2007 (thus assuming it's RR/DD/MM format)
    or even more obscurely...
    3rd July 2008 (MM/RR/DD)
    or
    7th March 2008 (DD/RR/MM)
    Do you have any information to tell you what formats are valid that would allow you to be specific and know what date format is meant?
    This is a classic example of why dates should be stored on the database using DATE datatype and not VARCHAR2. It can lead to corruption of data, especially if the date can be entered in any format a user wishes.

  • I'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

    i'm a new mac user and need to program future email's. How can I do that? in outlook I can make a change in the date that the email will be sent. How I do that in mail?

    There isn't a way directly in Mail.
    Here's what google says: http://www.google.com/search?client=safari&rls=en&q=mac+os+x+mail+delayed+send&i e=UTF-8&oe=UTF-8

  • Date format in the Web layout of Oracle 10g Reports

    Dear all,
    I want to change the date format in the oracle reports. I am using weblayout & paper layout. I have changed format mask using property inspector. It appears in paper layout. How can i get in the weblayout, please help me.
    With Regards,
    Srinivas

    Hi Srinivas,
    I think whatever applicable in Paper Layout should be applicable to Web Layout also.
    Regards,
    Raj

  • Date format in the file datastore

    Hi,
    I have source as file, in which I have date column. While creating the file datastore, I have selected the datatype as date & have given the source date format in the format column and it is working fine.
    But I have source file coming with different date formats for the same column.
    My question is whether i can give multiple date formats in the format column??
    1. If yes how to separate the formats i.e with comma or semi-colon or etc...
    2. If No, thn how to achieve it. as I can use to_date function, but in that also I have to give all the date formats.

    Assuming Oracle is target database..
    Try this...
    1. In your file data store make the column as Varchar2
    2. In the interface mapping -- specify the following string in the target column mapping
    TO_DATE(REPLACE('2011-06-01','-',''),'YYYYMMDD')
    If your target column is date, Oracle will convert database proper format and insert the date..
    Hope this works out....
    Thanks
    Satish
    Edited by: user12826256 on 01-Jul-2011 02:15

  • Setting date format for the entire SQL Server installation - SQL Server 2008 R2-2012

    Hi,
    I need to safeguard the behaviour of SQL codes that inserting into SQL tables with some date columns. For this purpose, I need to change the date format for the SQL instance and not using CONVERT and CAST.
    I've seen the SET DATE FORMAT statement, but if I use it, could I solve my problem?
    Thanks

    The language setting is related to the database user.
    BOL: "DEFAULT_LANGUAGE = { NONE | <lcid> | <language name> | <language alias> }              
    Specifies the default language for the new user. If a default language is specified for the user and the default language of the database is later changed, the users default language remains as specified.
    If no default language is specified, the default language for the user will be the default language of the database. If the default language for the user is not specified and the default language of the database is later changed, the default
    language of the user will change to the new default language for the database."
    LINK: http://technet.microsoft.com/en-us/library/ms173463.aspx
    The default language setting can be overridden by SET LANGUAGE for the session:
    http://technet.microsoft.com/en-us/library/ms174398.aspx
    Example:
    SET LANGUAGE us_english; -- mdy
    SELECT CAST ('12/13/2014' as DATE); -- 2014-12-13
    GO
    SET LANGUAGE british; -- dmy
    SELECT CAST ('12/13/2014' as DATE);
    GO
    (1 row(s) affected)
    Changed language setting to British.
    Msg 241, Level 16, State 1, Line 2
    Conversion failed when converting date and/or time from character string.
    Kalman Toth Database & OLAP Architect
    SELECT Video Tutorials 4 Hours
    New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012

Maybe you are looking for