Date format needs to be in selection screen mm/dd/yyyy but in alv output ..

hi
i need help on displaying date in alv output
date format needs to be in selection screen mm/dd/yyyy but in alv output ..it should be displayed as yyyymmdd
regards
Nishant

hi,
you are passing the value to ALv using an internal table.
so store the format YYYYMMDD date in the internal table and pass it to ALV.
use the below FM
DD/MM/YYYY -> YYYYMMDD
CONVERSION_EXIT_PDATE_INPUT
rgds
Anver

Similar Messages

Date Format (Need result in date format)

Dear ,
i have worked on this query which produce result in error, infact i need result in date format and this format 'MON-YY'. :
select to_date( EFFECTIVE_DATE,'MON-YY' ) as MON_YY FROM GL_JE_LINES
but now EFFECTIVE_DATE is like this format '12/31/2008'

I tell again: a date has no internal format.
There is only a default output-format for date-objects wich is used as default output format and for implicit date conversions.
If you want to know the actual nls_date_format for your session you can use:
select * from nls_session_parameters where parameter='NLS_DATE_FORMAT';You can change it for your session with:
alter session set nls_date_format='<your_new_date_format>';Please take a look at:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14237/initparams122.htm
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/sql_elements004.htm#sthref405
http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/sql_elements003.htm#BABGIGCJ
The internal storage of a date-object does not depend on the actual value of NLS_DATE_FORMAT.
This will only used for output and for implicit conversions e.g. with to_date or to_char without explicit format.
To select a date from a table is also an implicit conversion to character, because you want to see characters on your screen.
Edited by: hm on 29.12.2010 04:20

Need Table Control in Selection Screen

I have a selection screen with some fields. Now, below these fields, I need a table control in which i will have input parameter along with some check boxes so that i can enter data and use the same while executing the report.
paste the code for the requirement how to add a table control on the selection screen.

hi ramesh,
i have a very same requirement as u did. pleae send me the code which u used.
Till now, i have been able to display table control on selection screen. but, how to write or display the output or how to call the output screen. i have to display alv output.
Please help on above issue.
Thanks,
Rajesh

How to display data from internal table in the SELECTION-SCREEN

Hello Experts,
My requirement is to display the data's from an internal table in the selection screen. I tried using selection-screen comment. But it is working only for a single record. Can anyone please tell me how to do this?

Hi Ritika,
we cant use write statement inside selection-screen.
see my coding.
SELECTION-SCREEN BEGIN OF SCREEN 123 AS WINDOW TITLE TEXT-456.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1
 NO INTERVALS.
 SELECT-OPTIONS SEL1 FOR SY-DATUM.
 PARAMETERS PAR1(10).
** I WANT ALL RECORDS FROM AN INTERNAL TABLE HERE ONLY
 SELECTION-SCREEN END OF BLOCK BL1.
SELECTION-SCREEN PUSHBUTTON 2(10) but1 USER-COMMAND cli1.
SELECTION-SCREEN PUSHBUTTON 20(10) but2 USER-COMMAND cli2.
SELECTION-SCREEN END OF SCREEN 123.

How to to load data from a flat file in selection screen in portal .

Dear All,
I have a question to share : In BEX analyzer i know how i can upload multiple data in selection screen through a flat file , for example if i have to load 200 materials at one go in the selection screen, i can do that in BEX Analyzer . But if i run the same report through portal i am not able to find the upload option through flat file ..... Am i missing some option here ?
Thanks & Regards,
Ashutosh Singh

You will not be able to load through the portal directly. it is possible to load if you can create Visual composer model. that also you will not be able to upload in bulk.

Need to generate dynamic selection screen

Hi,
'am looking for a requirement in ABAP Programming which is feasible!
While executing my report, std. selection screen ( 1000) gets displayed and it gives the output list which consists of only one field that will have TABLE NAMES. Once the user selects any one of the record on this output list, I need to display another screen ( selection screen ) with all the key fields of that table that got seleted.
How do I populate a dynamic selection screen by passing TABLE NAME as parameter with all the keyfields of that table as select-options.
Awaiting your quick positive reply..
Regards,
Kriss.

hii
check this one
SELECTION-SCREEN BEGIN OF BLOCK blk.
PARAMETERS : p_rb1 TYPE c RADIOBUTTON GROUP rad1 DEFAULT 'X' USER-COMMAND FC,
 p_rb2 TYPE c RADIOBUTTON GROUP rad1.
SELECTION-SCREEN END OF BLOCK blk.
SELECTION-SCREEN BEGIN OF BLOCK blk_1 WITH FRAME.
PARAMETERS : p_werks1 TYPE werks_d MODIF ID bk1.
SELECTION-SCREEN END OF BLOCK blk_1.
SELECTION-SCREEN BEGIN OF BLOCK blk_2 WITH FRAME.
PARAMETERS : p_werks2 TYPE werks_d MODIF ID bk2,
 p_matnr2 TYPE matnr MODIF ID bk2.
SELECTION-SCREEN END OF BLOCK blk_2.
AT SELECTION-SCREEN OUTPUT.
IF p_rb1 = 'X'.
 LOOP AT SCREEN.
 IF screen-group1 = 'BK1'.
 screen-active = 0.
 MODIFY SCREEN.
 ELSE.
 screen-active = 1.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ELSE.
 LOOP AT SCREEN.
 IF screen-group1 = 'BK2'.
 screen-active = 0.
 MODIFY SCREEN.
 ELSE.
 screen-active = 1.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ENDIF.
Regards
Naresh

PeopleSoft9.0, In PS Query Date Format Need to Change.

In Peoplesoft9.0 PS Query we created the quries like SELECT TO_CHAR(A.ACCOUNTING_DT,'YYYY-MM-DD')
FROM PS_VCHR_ACCTG_LINE A, but the result in PS Query like this
08/16/1999
08/16/1999
08/16/1999
08/16/1999
08/16/1999
08/16/1999
08/16/1999
08/16/1999
08/16/1999
08/16/1999
08/16/1999
08/16/1999
08/16/1999
08/16/1999
08/16/1999
08/16/1999
Format we given is YYYY-MM-DD, but in result the format is MM/DD/YYYY, how can i changes this.
Thanks in Advance
P.Ayyanar

Instead of dragging and dropping ACCOUNTING_DT field follow the given steps
1. Create a new expression
2. Select expression type as charactor
3. type the following expression TO_CHAR(A.ACCOUNTING_DT,'YYYY-MM-DD'), if you are using oracle database
4. Drag and drop this expression in the select list
You will see date in YYY-MM-DD

Date display 15 days automatically on selection screen.

I have to display on selection screen as
from date value (current date - 15 days )
To date (current date )
How to build logic ?
Thanks in advance

Hi sam,
1. simple
2. just copy paste
3.
REPORT ABC.
data : dt type sy-datum.
select-options : mydate for dt.
*----
INITIALIZATION.
MYDATE-SIGN = 'I'.
MYDATE-OPTION = 'BT'.
MYDATE-LOW = SY-DATUM - 15.
MYDATE-HIGH = SY-DATUM.
APPEND MYDATE.
regards,
amit m.

ALV - selecting the data based on layout set in selection screen

Hi,
I have an ALV report (Custom). I want to give layout selection at selection screen, so the user can create/select/manage layout at the time of selection screen and only these columns will be displayed in the final output. Instead user execute the report for all column and at the end user select the layout. I want this layout at the selection screen level like the standard reports.
Thanks,

You can do the following
When the user clicks on download
1.Use FM REUSE_ALV_LIST_LAYOUT_INFO_GET / REUSE_ALV_GRID_LAYOUT_INFO_GET to get the Fieldcat (since due to selection of layout on sel screen some columns are disabled. For the columns which have been disabled the resultant Fieldcat from the above FMs would have NO_OUT = 'X'. Delete columns from Fieldcat itab where no_out = 'X'
2.create a dynamic itab using cl_alv_table_create=>create_dynamic_table( ) passing the above Fieldcat itab, get a handle of new itab
3.loop over the original itab and fill the new dynamic itab
hope this helps...

Display selection screen details in the header of ALV

hi..
can someone please help me on how to display the data in the selection screen in the header in ALV?
i hope someone can help me..thanks very much..

Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100

Regarding Selection Screen field making display field in ALV report

Hi All,
In ALV Report, at runtime how can i make the field as Display Field in selection screen .
Thks & Regds
Shailesh

hii,
Go to se38 and give the below progra name execute.... check the source code it is very easy to understand.
1.demo_dynpro_modify_simple
2.demo_dynpro_modify_screen
if tou are using grid,u can refer to foll link
sequencing / choosing fields in report screen at runtime,
Display the Columns in the grid at run time
rgrds,
Shweta

Selection-screen and top-of-page in ALV

Hello experts,
1. In my selection-screen I have 2 parameters as display only. Now, how can I position/move them?
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(10) text-002 FOR FIELD p_dcode.
PARAMETER: p_dcode LIKE zsoemailid-kunnr MODIF ID id1,
 p_name1 LIKE kna1-name1 MODIF ID id1.
SELECTION-SCREEN END OF LINE.
SELECT-OPTIONS: s_sorder FOR vbap-vbeln MODIF ID id2,
 so_date FOR vbap-erdat MODIF ID id2.
SELECTION-SCREEN END OF BLOCK b1.
2. In my ALV display, how can I make my header and ALV list display with no spaces. Example:
Dealer no: 12345
Address: XXXXXX
Tel: 00000
"<--ALV display
Again, thank you guys and have a nice day!

Hi viray,
For positioning the parameters on selection screen you can use two additions pos_low and pos_high as in given example
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 10(15) TEXT-001
 FOR FIELD PARM.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS PARM LIKE SAPLANE-PLANETYPE.
SELECTION-SCREEN PUSHBUTTON POS_HIGH(8) PUSHY
 USER-COMMAND ABCD.
SELECTION-SCREEN ULINE (5).
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN ULINE /12(10).
Regards
Sumit Bhutani
Ps reward points if helpful

Lion Address Book doesn't accommodate "yyyy-mm-dd" date format..., Lion Address Book doesn't accommodate "yyyy-mm-dd" date format...

Help! How do I get Lion Address Book to accommodate "yyyy-mm-dd" date format?

Nor does Lion appear to accurately insert "long" date format in Word 2011.
Although long date format appears correctly in Language & Text Preferences, when inserted in Word the year inserts only the last two digits of year, e.g., July 27, 11 -- should be July 27, 2011.

Date offset as input on query selection screen

Alright all,
I have a date variable which is based on current month/year. We need to allow the user the ability to offset this date by a month. e.g.
if date is 06.2010, they will have the ability to enter '2' as the offset and this will give them data from 05.2010 to 06.2010.
We cant use intervals for this, need the ability to be able to enter an offset.
Any ideas?
Thanks,
Nick

Hi Ravi,
Thanks for the sugestion.
The condition has to based on a keyfigure right?
What if the only key figure in the cube is a currency based key fgure? This probably wont work if you only want a value of say '3'?
Any thoughts? Would you create a dummy key figure in the cube? Seems a bit messy.
Thanks.
Nick.

Date format - need this format -- 04/04/2002 - need help?

Hi, I am trying to get the date into this format 04/04/2002, so I can insert into the database...
I have this code.. but it display it like this - Apr 4, 2002
Date t = new Date();
String today = DateFormat.getDateInstance().format(t)
Thx
Rich

Or because today is the 4th day of the 4th month maybe :
java.util.Date t = new java.util.Date();
java.text.SimpleDateFormat df = new java.text.SimpleDateFormat("MM/dd/yyyy");
System.out.println(df.format(t));

Date format needs to be in selection screen mm/dd/yyyy but in alv output ..

Similar Messages

Maybe you are looking for